I have T-Moble here in the US and updated my Pocket PC Phone edition rom versio 4.00.16 ENG and noticed they have this call barring feature in the phone settings that lets you bar incoming or aout going calls but to activate you have to enter a call barring password does anyone know what it is.
i never used or tried it, but i was told its the last 4 digits of your social securty # or last 4 of your fone #
I tried both abd it didnt work but thanks for the info
I always thought call barring was done through the sim/service provider password.
T-Mobile also uses 1234 as a default password often.
also try 5678
Thanks again people i will try thpse suggestions today
Where did you find a 4.00.xx update for Tmobile? I just checked their site and they still had the old Nov 2002 3.16 code up there.
Thanks,
If you look at the ROM Update section of this forum you will see we have easy access to various 4.00.xx ROM updates.
SIM PIN 1 & 2
Ok, I had an experience earlier this year where one of my t-mobile phones (not the PPC) wanted "Sim Pin 2" to access a feature. I ended up getting my sim pin blocked and called up t-mo support. After a little bit of "Try to get the information out of the dumb support person" I finally had the person ask me "Well, I could give you PUK1 and PUK2, if you think that would help", I said i thought it might, and she gave me the two keys to the kingdom (Along with what SIM PIN 2 was originally, just a random string of number). The moral: Call T-Mobile, tell them you have a feature that you can't unlock and that you think you've screwed up your phone bigtime. If they ask if you want to send it in, say no, that you think you can fix the problem if they give you these weird PUK numbers or PIN numbers. They'll probably just be happy to get you off the phone, and these might be the numbers you're looking for.
Tmobile has a special plan called the "data-only" plan that automatically blocks all incoming or outgoing calls. However, it still allows emergency dialing (911) and 611 calls... Just call a rep and have them set you up with that plan! Everything costs the same...
Hello
Some days ago I received my HTC Shift and I am very satisfied!
Unfortunately there is one strange Problem:
I am using a MultiSIM by T-Mobile, that means I have one number for multiple devices.
If the HTC Shift would make phone calls and someone calls me, the shift and my MDA Vario III would be ringing.
When I activate the Modem in my Shift it seems the Shift receives phone calls and then denies them! So nobody can call me when I am using my shift, since all calls are directed to my mailbox
Has anyone of you an idea what can I do?
(btw: I unlocked my Shift already to full WM6 )
The shift doesnt support phone calls...even if you have on sim card it wont ring
Use it for its gprs/edge/3g and sms sending n receiving
rdosti said:
The shift doesnt support phone calls...even if you have on sim card it wont ring
Use it for its gprs/edge/3g and sms sending n receiving
Click to expand...
Click to collapse
Hello
thats exactly what I like to use the shift for. I am not interested in making phone calls with it.
But the Shift is blocking calls, which should also arrive on my mobile phone...
I think HTC has made this blocking to avoid connection problems when somebody tries to calls the shift (which is not supported).
Is this right?
Might work?
I don't know for sure about T-Mobile. I am using a similar service (they call it "FlexiCard") from E-Plus. They have a function that allows you to designate one of your SIM cards as the primary card. This is the card that will receive calls (and SMS) first, only if this card is not active (phone turned off) or busy a call or SMS will be routed to the other card.
However, there seems to be a service difference between T-Mobile and E-Plus: I have the SIM card in my Shift still designated as the "primary" card. If the modem is turned on, this is interpreted by E-Plus as "busy", so calls go to my phone (which holds the "secondary" card). If the modem is turned off, the SIM card in my Shift is obviously inactive and not visible to the mobile network. So the only reason for me to switch "primary" vs. "secondary" would be to continue receiving SMS messages on my phone rather than the Shift. Unfortunately, for SMS E-Plus does not bother whether the "primary" card is active / busy or not, SMS always go to that card (understandable when you look at how SMS works on mobile networks).
If you don't find any information about switching primary/secondary card in your documentation that came with the card I suggest contacting the T-Mobile hotline. They should be able to tell you whether this functionality is available with your "MultiSIM" and how to switch "primary" between the cards.
Thank you mw65719 four your tip.
I just phoned with T-Mobile support.
They don't support it like Eplus to switch between SIMCards.
It is just possible to define a primary card for SMS service, not for phone calls. Whenever someone calls me both phones are ringing.
So I will have to buy a new contract with T-Mobile just for data transfer, which is more expensive than the combination of phone/data contract.
I have the same issue with the MultiSIM from t-mobile. Both phones (the other one is a Touch) are ringing, after the first ring a line-busy message is generated.
Seems that the Shift in canceling the incoming call after the first ring.
Does anyone has an idea to solve this problem instead of splitting the MultiSIM into two separate contracts?
Have just opened a suuport case at HTC Europe concering this issue. Seems to be a German (and t-mobile) specific problem.....
speech service ?!
gsiakoe said:
Seems that the Shift in canceling the incoming call after the first ring.
Click to expand...
Click to collapse
find out how the call canceled
a: is it the 3g modem that set the networkstatus to -> data service only
b: or a apllication that will call canceled - reason busy
see here what i mean
http://www.t-mobile.de/downloads/laptop/hyperterminalmulti-sim-anleitung.pdf
I think it's part of the WinMo/SnapVue side.
Vista enables a lan connection with WinMo for internet.
So there could be settings in the registry to enable/disable this busy status.
I try to find somethin, but unfortunately i'm not a pro like others here in the Board.
Where are you folks, on Planet Mars, everyone and all documents I read say that the Shift cannot support phone calls???????
alexn2 said:
Where are you folks, on Planet Mars, everyone and all documents I read say that the Shift cannot support phone calls???????
Click to expand...
Click to collapse
it can be made to recieve them though. we all say Bengalboy's pics. about the phone calls being blocked. that does suck. i guess we have to wait till the phone side is re activated.
Idea how to activate phone pad
Pawel062 said:
it can be made to recieve them though. we all say Bengalboy's pics. about the phone calls being blocked. that does suck. i guess we have to wait till the phone side is re activated.
Click to expand...
Click to collapse
I had some phone calls with T-Mobile Business support and they told me a trick how to activate the phone function, but I dont get this to work.
What I have to do is the following:
1. Download and install a hyper terminal application on Windows mobile (I found http://www.cambridgevx.com (Server seems to be down at the moment))
2. Open a direct connection to the modem
3. Enter the following commands:
3a: AT_odo?
(this should show 1 which means speech is deactivated
3b: AT_odo=0
(speech is beeing activated)
4. Reset Windows Mobile and the phone should be activated
I was told this is known to work on some data modems and should work on the HTC Shift too.
But always I try setp 2 I get an error "cannot open data connection"
Has anyone an idea?
Irgendware said:
I had some phone calls with T-Mobile Business support and they told me a trick how to activate the phone function, but I dont get this to work.
What I have to do is the following:
1. Download and install a hyper terminal application on Windows mobile (I found http://www.cambridgevx.com (Server seems to be down at the moment))
2. Open a direct connection to the modem
3. Enter the following commands:
3a: AT_odo?
(this should show 1 which means speech is deactivated
3b: AT_odo=0
(speech is beeing activated)
4. Reset Windows Mobile and the phone should be activated
I was told this is known to work on some data modems and should work on the HTC Shift too.
But always I try setp 2 I get an error "cannot open data connection"
Has anyone an idea?
Click to expand...
Click to collapse
problem there is no phone pad aka dial pad in production models as far as i know. so even if u can re enable it u wont have any images etc... it'll most likely require a custom rom or if we get lucky a cab.
Pawel062 said:
problem there is no phone pad aka dial pad in production models as far as i know. so even if u can re enable it u wont have any images etc... it'll most likely require a custom rom or if we get lucky a cab.
Click to expand...
Click to collapse
I am not interested in using the phone pad.
I like to solve the busy line problem (read some posts above). When activating the speech on modem side, this would be solve and I could use my Shift with my MultiSIM-Card
Irgendware said:
I had some phone calls with T-Mobile Business support and they told me a trick how to activate the phone function, but I dont get this to work.
What I have to do is the following:
1. Download and install a hyper terminal application on Windows mobile (I found http://www.cambridgevx.com (Server seems to be down at the moment))
2. Open a direct connection to the modem
3. Enter the following commands:
3a: AT_odo?
(this should show 1 which means speech is deactivated
3b: AT_odo=0
(speech is beeing activated)
4. Reset Windows Mobile and the phone should be activated
I was told this is known to work on some data modems and should work on the HTC Shift too.
But always I try setp 2 I get an error "cannot open data connection"
Has anyone an idea?
Click to expand...
Click to collapse
souds interesting ! .. have you try some scenarios ? with 3G enabled, with 3G disabled, with wifi enabled, with wifi disabled ... etc ?
I can't try myself.. but as there are data connection through 3G.. I think that it is possible to find a solution to the step 2 !
Anybody found a solution for this?
Getting my shift soon, and im going for a twin sim solution. would suck if i cant get phone calls on my kaiser cos the shift is on in snap vue mode and rejects the calls.
I am experiencing the same Problem with my Shift.
It is crazy, because my Mobile rings a halt time, then the Shift rejects the call. Afterwards, I have to call back.
The problem should be able to solve, but you have, anyhow, to tell the shifts modem not to reject voice calls. Still, I do not know how to tell the modem
Hello?
Has anyone resolved this issue? I'm a new MultiSIM user, and the idea of not having any internet with my shift is ****ing me off (that would make it as useful as a brick ).
Any resolution is appreciated.
Cheers.
HI @ all, i don´t know, if you fixed that problem.
I´m a multi SIm user too. With the original Radio Version (shipped with german SHIFT) the same problem. After that, i update the radio Version to the Phone edition radio Version:
see:
http://forum.xda-developers.com/showthread.php?t=486234
(but here always my WinCE Side was really slow??) so I Downgrade back the phone edition
1.27.35.28 and ce OS version 5.2.1620 (I00 ROm I think)
And now, Phone is working, and never the Multisim usage hangs up.
I don´t know why, i play every 1 month with Shift and upgrade, downgrade something, then the most time shift is not in use, so i don´t make a history what happend...
:-(
But with the new radio Version it will work.
maybe this rom work too:
Cmonex posted another radio for backup. This radio is for original rom (ie all other roms from the forum). Look for the link on page 5, or here
http://rapidshare.com/files/20211808...ift1582123.zip <- this is not for the phone or for this rom
Mirror: http://www.mediafire.com/?sharekey=7...e6ba49b5870170
Irgendware said:
Hello
Some days ago I received my HTC Shift and I am very satisfied!
Unfortunately there is one strange Problem:
I am using a MultiSIM by T-Mobile, that means I have one number for multiple devices.
If the HTC Shift would make phone calls and someone calls me, the shift and my MDA Vario III would be ringing.
When I activate the Modem in my Shift it seems the Shift receives phone calls and then denies them! So nobody can call me when I am using my shift, since all calls are directed to my mailbox
Has anyone of you an idea what can I do?
(btw: I unlocked my Shift already to full WM6 )
Click to expand...
Click to collapse
it happens with all multiple sims when you have all the devices activated!!!...
when you have multiple sims and you have all the devices open...
which device should accept the call ??
it does not work as douplex land line... not all of your mobile devices should ring at the same time ... obviously the one that was opened first and got the signal from your provider should get the line...
the twin sim solution works fine with me ... plus unlimited internet access from phone and the shift...
BUT one device open at a time ...
Hi I'm jayus from Indonesia. I have HTC Ozone Verizon. I have unlocked it and used it with my local CDMA and GSM operator. I have two problem about the phone.
1. When I'm in GSM mode, if i dial '081212345678' the call would not connect. However if i try dial complete number like '+6281212345678' the call would connect. But if I'm in CDMA mode I have no problem about this, I can make a call using direct number like 081212345678 and the call would succeed. I have turned the assisted dialing on and set the the reference country to indonesia, but the problem still exist.
2. When I'm in CDMA mode, everytime I try to send SMS the phone would automatically change the destination number from ex 08129500140 to 01108129500140. Looks like the phone always add prefix 011 to the real number. So I always failed to send SMS. But the problem didn't exist in GSM. In GSM mode I can send SMS successfully and the phone did not add prefix 011.
What's wrong with the phone? Need help please..!!
Hi,
This is interesting cause i have the same problem with my
Touch pro 2 from VERIZON.
I made a thread about it, follow it here:
http://forum.xda-developers.com/showthread.php?p=5854877
I was thinking this might be something in the verizon stock rom so if you flashed
to a rom that wasnt stock from Verizon you wouldnt have to deal with it.
I havent got this confirmed yet.
Keep me posted if you find something
I dont know about cdma i only use gsm.
I hade the exact same problem as you and I finally solved by disabling
assisted calling in registry settings
Ok... where do I start...
A few weeks ago, I remember seeing something on a thread (I am 99% sure it was XDA) that was talking about using a US CDMA/GSM phone overseas. You would purchase a SIM card which would in turn allow you to make calls/text etc with a LOCAL Foreign number.
The thread was a "hack" that somehow would let you do the above... but it would display your US Local number (i think so that you could call back home to US and have it show your number- or google voice number).
Does anyone know what I'm talking about?
I could be completely nuts.... but i swear I saw something like this.
To clarify- this is NOT VOIP calling (like groove IP which uses google voice and your WIFI to make/recieve calls with your GV number)... this was using a foreign GSM SIM but somehow having it show a differeny number.
Thanks in advance.
nudge nudge
Not sure if this will help... but It's worth a mention
h20wakebum said:
Ok... where do I start...
A few weeks ago, I remember seeing something on a thread (I am 99% sure it was XDA) that was talking about using a US CDMA/GSM phone overseas. You would purchase a SIM card which would in turn allow you to make calls/text etc with a LOCAL Foreign number.
The thread was a "hack" that somehow would let you do the above... but it would display your US Local number (i think so that you could call back home to US and have it show your number- or google voice number).
Does anyone know what I'm talking about?
I could be completely nuts.... but i swear I saw something like this.
To clarify- this is NOT VOIP calling (like groove IP which uses google voice and your WIFI to make/recieve calls with your GV number)... this was using a foreign GSM SIM but somehow having it show a differeny number.
Thanks in advance.
Click to expand...
Click to collapse
I know how to change the number associated with the phone. I just did it with my US Sprint locked S4. I live in Canada - have a Toronto SIM card in, but everytime I called voice mail it would still call the Florida cell number that used to be associated with the old owner of the phone. First you need your MSL number. (Instructions to get your MSL: http://forum.xda-developers.com/showthread.php?t=2271618) Then you go to the phone keypad and type ##111111# (The 1's represent the 6 digit MSL number you got) Hit edit - and it will allow you to change the phone number associated with the phone. Like I said - not sure if this would resolve your problem - but I thought I'd give it a try.