Database Users

P1000L only restart, freeze in logo

I have problem in my P1000L
I make flash but error in screen tablet
<ID:0/087> Odin v.3 engine (ID:87)..
<ID:0/087> File analysis..
<ID:0/087> SetupConnection..
<ID:0/087> Initialzation..
<ID:0/087> Set PIT file..
<ID:0/087> DO NOT TURN OFF TARGET!!
<ID:0/087> Get PIT for mapping..
<ID:0/087> Firmware update start..
<ID:0/087> zImage
<ID:0/087> Sbl.bin
<ID:0/087> param.lfs
<ID:0/087> modem.bin
<ID:0/087> factoryfs.rfs
<ID:0/087> dbdata.rfs
<ID:0/087> cache.rfs
<ID:0/087> boot.bin
<ID:0/087> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/087> Removed!!
<ID:0/094> Added!!
csc : deleting /system/csc
csc : done.
Successfully installed packpage.
Updating filesystem...
E:failed to mount /efs (invalid argument)
E:discard_filesystem_for_rfs:Can't mount /efs
--wiping cache...
Formatting /cache...
Cache wipe failed.
--Updating applications...
E:failed to mount /preload (No such file or direcotry)
E:install_application_for_customer:Can´t mount /preload
your storage not prepared yet, please use UI menu for format and reboot actions.
copy application failed
Appling Multi-CSC...
E:failed to mount /efs (invalid argument)
E:multi_csc: Can´t mount /efs
What problem?:

turca said:
I have problem in my P1000L
I make flash but error in screen tablet
<ID:0/087> Odin v.3 engine (ID:87)..
<ID:0/087> File analysis..
<ID:0/087> SetupConnection..
<ID:0/087> Initialzation..
<ID:0/087> Set PIT file..
<ID:0/087> DO NOT TURN OFF TARGET!!
<ID:0/087> Get PIT for mapping..
<ID:0/087> Firmware update start..
<ID:0/087> zImage
<ID:0/087> Sbl.bin
<ID:0/087> param.lfs
<ID:0/087> modem.bin
<ID:0/087> factoryfs.rfs
<ID:0/087> dbdata.rfs
<ID:0/087> cache.rfs
<ID:0/087> boot.bin
<ID:0/087> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/087> Removed!!
<ID:0/094> Added!!
csc : deleting /system/csc
csc : done.
Successfully installed packpage.
Updating filesystem...
E:failed to mount /efs (invalid argument)
E:discard_filesystem_for_rfs:Can't mount /efs
--wiping cache...
Formatting /cache...
Cache wipe failed.
--Updating applications...
E:failed to mount /preload (No such file or direcotry)
E:install_application_for_customer:Can´t mount /preload
your storage not prepared yet, please use UI menu for format and reboot actions.
copy application failed
Appling Multi-CSC...
E:failed to mount /efs (invalid argument)
E:multi_csc: Can´t mount /efs
What problem?:
Click to expand...
Click to collapse
There solution to this problem

Which rom did you flash? Which options did you check in Odin?
Sent from my GT-P1000L using XDA

[Odin] Pit re-partition takes no effect

Hi
I tried to re-partition my Samsung S3 mini with a custom pit file with Odin v3.07. This is Odin output, looks ok:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
I'd like to remove the recovery partition and resize following system partition instead. The download menu on the device prints a red warning "Custom pit file", which I ignore.
After rebooting the device, I can't see any change, the recovery image still boots and the red flag in the download mode disappeared.
Why does it not work, I tried already different checkbox combinations on Odin.
Regards
Edit:
The problem was, that I tried to repartition the device without flashing the images. Instead of Odin, Heimdall throws an error.

[Q] [HELP BRICKED Grand 2] Flashing stock rom via odin wont Help!

My phone is soft bricked i think, it can go to download mode but cant flash anything. Tried to flash stock rom, Odin says "There is no PIT Partition". I tried to flash the PIT File for my phone but it also says
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010>
<ID:0/010> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help me!

U need the PIT file for G7102
Search the forum for G7102 PIT file

[Q] ODIN failed, safe to unplug

Im in download mode when odin failed.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It says do not turn off target !!
It it safe to turn it off in this case and solve the problem?

Yea, it already failed, it's safe to unplug

*Detection* said:
Yea, it already failed, it's safe to unplug
Click to expand...
Click to collapse
Safe to reboot as well?

xs34 said:
Safe to reboot as well?
Click to expand...
Click to collapse
Yea, safe to use your phone as normal
ODIN failed, so it made no changes to your phone

Thank you for your fast reply. I have now succesfully finished my work
For those with the same problem with odin, please reboot like I did and disable reactivation lock (if thats a proper translate). You can find it under security, close to the setting find my device

<id:0/004> fail!
Hi Everyone!
This is my 1st post in any fourms ever. I always get solutions by searching, but i guess am umable to find a correct solution for this . Am hoping if someone could re-direct me to fix my phone.
Issue:
My screen is stuck on the boot screen ( Galaxy Note 2 N7100 - screen). It doesnt go further.
Background:
I was using Diamond ROM for quite a long time. I have no clue, last night i was talking to someone and later i kept my phone in pocket and since then its stuck on that screen. I am not sure what happened or what caused it
I am using Philz Recovery, but when am booting to it
it has the below Error:
PhilX Touch 6.26.6
Clockworkmod v6.0.4.8
E:Could not mount /data to setup /data/media path!
E:Can't mount /cache/recovery/command
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:Can't mount /cache/recovery/last_install
E:Can't open /cache/recovery/last_install
I Tried everything possible (restarted may times, tried to wipe off the cache - it was not wiping)
Then i thought to reinstall PhilZ.
WHen i went to the download recovery on my phone and connected to odin v3.09 (which i used last time when installing custom ROM and it worked) phone is getting added.
But when i select AP to the PhilZ recovery file (philz_touch_6.26.6-n7100.tar.md5) and click on Start it is giving me error and it failed
Error:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.26.6-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Someone Please Help me

Failed to mount Cache (invalid argument)

Hey guys,
I tried to install a Custom ROM on my Samsung Galaxy Note 3, but it failed pretty hard. After trying to reboot and gest stuck in a boot loop I now get several error messages in recovery mode:
Code:
# MANUAL MODE #
-- Applied the CSC-code : DBT
Successfully applied multi-CSC.
E:failed to mount /cache (Invalid argument)
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/last_install
E:Can't open /cache/recovery/last_install
E:failed to mount /cache (Invalid argument)
I also downloaded a Stock ROM from Sammobile, but it could not be installed via ODIN, I just got another "Fail"-Message. Here's the log:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005ZSUGOH3_N9005OZSGOH3_N9005ZSUGOH3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What can I do to get back a running device? I would be fine with flashing another ROM and loosing data.. Just want a working device!

Lol...
Sent from my Galaxy Note8 using XDA Labs

= try fix the failed to mount cache issue, you have to go to recovery menu and mount system and then clear cache again. It will fix the issue.

how did you got out of this loop? would appreciate a fast reply

READ thread

JJEgan said:
READ thread
Click to expand...
Click to collapse
I cant go to my recovery either. I have a Samsung Tab A 10.5
Bootloader/download mode can only be acessed via recovery mode in this particular device and not by volume down and power key.
My issue is almost this same, but these lines keeps recurring before the tab finally runs out of battery. Same thing happens when I plug in the device. Not even the charging animation comes up.
I dont really know what's the issue :/

Issue is you are in the wrong forum this is NOTE 3 not tab .Not a clue as to what a Tab requires .

JJEgan said:
Issue is you are in the wrong forum this is NOTE 3 not tab .Not a clue as to what a Tab requires .
Click to expand...
Click to collapse
Appreciate your replies, but I searched everywhere this is the closest to my error, so I thought why not. Anyways, samsung care seems only the option as of now.

Did you fix this?