Hi, I'm trying to SuperCharge my phone but seems that values just don't stick on my Defy. I'm currently running CM9 -> Quarx 20120522 but v6 just can't load the proper values on boot.
jltorrente said:
Hi, I'm trying to SuperCharge my phone but seems that values just don't stick on my Defy. I'm currently running CM9 -> Quarx 20120522 but v6 just can't load the proper values on boot.
Click to expand...
Click to collapse
Have you replaced services.jar like it says in the v6 thread. It is in the second post of the thread
Sent from my MB525 using XDA
NI55AN said:
Have you replaced services.jar like it says in the v6 thread. It is in the second post of the thread
Sent from my MB525 using XDA
Click to expand...
Click to collapse
Yep, did all the su replacement + service.jar patching... It's tells me to read the owner's guide in case that prefs didn't stick, it says that I should check init.d but all seems to be in order... :S
jltorrente said:
Hi, I'm trying to SuperCharge my phone but seems that values just don't stick on my Defy. I'm currently running CM9 -> Quarx 20120522 but v6 just can't load the proper values on boot.
Click to expand...
Click to collapse
Strange because for me its working. Are you using the latest script ? I know that the older one had similar problems on ics.
Sent from my ICS Defy
NITRO_100 said:
Strange because for me its working. Are you using the latest script ? I know that the older one had similar problems on ics.
Sent from my ICS Defy
Click to expand...
Click to collapse
Yes, I´m using the latest stable one. It's very odd, as it worked on my last ROM update.
I had the same problems. I had to use zeppelinrox's su update and busybox fix. After that I supercharged it twice and it stuck.
DarkStone82 said:
I had the same problems. I had to use zeppelinrox's su update and busybox fix. After that I supercharged it twice and it stuck.
Click to expand...
Click to collapse
I applied the su update but I have no idea what you mean with busybox fix... that may be the reason, where can I find some info about it?
Its wraithdu busybox its on the main downloads page for v6 supercharger. Just use the script to replace 1.20 busybox cm9 with 1.94 wraithdu busybox.
RC9 Test-12 reports Busybox on CM9 as incomplete.
the link in V6 OP is given for Busybox 1.94, It should work fine,
Test-12 even detects ICS launcher and does the services.jar fix by itself..
DarkStone82 said:
Its wraithdu busybox its on the main downloads page for v6 supercharger. Just use the script to replace 1.20 busybox cm9 with 1.94 wraithdu busybox.
Click to expand...
Click to collapse
neo.ank said:
RC9 Test-12 reports Busybox on CM9 as incomplete.
the link in V6 OP is given for Busybox 1.94, It should work fine,
Test-12 even detects ICS launcher and does the services.jar fix by itself..
Click to expand...
Click to collapse
Thanks, gonna give it a try with wraithdu custom Busybox and the new RC.
jltorrente said:
Thanks, gonna give it a try with wraithdu custom Busybox and the new RC.
Click to expand...
Click to collapse
It worked! seems like that info went missing by me on that sea of posts... thanks! I can't make my launcher bulletproof but still, it worked and minfree values are fine.
jltorrente said:
It worked! seems like that info went missing by me on that sea of posts... thanks! I can't make my launcher bulletproof but still, it worked and minfree values are fine.
Click to expand...
Click to collapse
Weird. What's your launcher ?
i feel as if supecharging barely makes a difference on quarx cm9 roms. in fact, the device seemed more sluggish when i was using it.
syllogyking said:
i feel as if supecharging barely makes a difference on quarx cm9 roms. in fact, the device seemed more sluggish when i was using it.
Click to expand...
Click to collapse
Strange.It made difference to mine. I'm certain the launcher was laggy before I supercharged..
NITRO_100 said:
Weird. What's your launcher ?
Click to expand...
Click to collapse
I use Apex, it becomes hard to kill but no bulletproof.
syllogyking said:
i feel as if supecharging barely makes a difference on quarx cm9 roms. in fact, the device seemed more sluggish when i was using it.
Click to expand...
Click to collapse
Weird, in general I found it more responsive and handling better the battery charge.
Related
New thread on listing the apps which are not compatible or just FC
Assumption: Everyone has done a full wipe as per Overcome instructions.
Your build must be from stock rom as instructed from Overcome team.
Then comparisons can be made...
P1000 GSM UK/EU model
GO Keyboard
Winamp
Some themes for ADW EX launcher - ADW EX does work.
Getting a lot of FCs on 4.0.0
What are other users of 4.0.0 finding ?
Any ideas how to fix/patch or work arounds.
I have just degraded from 2.3.5 to 2.3.3 Overcome 7 v4.0.0 rom and kernel and is working fine with most of the apps.
I followed the steps on this site as a guide:
< http://www.moniroth.com/mobile/android/how-to-install-overcome-rom-on-galaxy-tab-p1000.mh>, but download the stock rom and overcome 7 v4 rom from:
< http://forum.xda-developers.com/showthread.php?t=1317384>, as the p1000.overcometeam.com site seem to be down.
I used the wipe version, and reinstalled back all my previous apps one by one and all are working fine.
Sent from my GT-P1000 using XDA App
Maybe you wana try fixing permissions at the recovery menu, I was told that would resolve most of the FCs issue.
Sent from my GT-P1000 using XDA App
I dont have problem that U list
I dont have the problem you list....but i found Bug when we play the gameloft game...it will lag..and somtimes FC....
Winamp works just fine for me like everything else in Overcome.
Sent from my European p1000 running overcome 4.00
ferraritm said:
I have just degraded from 2.3.5 to 2.3.3 Overcome 7 v4.0.0 rom and kernel and is working fine with most of the apps.
I followed the steps on this site as a guide:
< http://www.moniroth.com/mobile/android/how-to-install-overcome-rom-on-galaxy-tab-p1000.mh>, but download the stock rom and overcome 7 v4 rom from:
< http://forum.xda-developers.com/showthread.php?t=1317384>, as the p1000.overcometeam.com site seem to be down.
I used the wipe version, and reinstalled back all my previous apps one by one and all are working
Click to expand...
Click to collapse
Yep I've done two full wipes.
I've been using overcome since v1 and still think its the
r best
Sent from my GT-P1000 using Tapatalk
The issue appears to be with market. I'm using 1market which allows me to download no problem
Sent from my GT-P1000 using Tapatalk
Fix Android Market "Not compatible with your device"
drdax said:
The issue appears to be with market.
Click to expand...
Click to collapse
Hate to bump an older thread but have a fix for the market. This is not related to the FC issues mentioned in the OP but the Android market may not like your DPI setting if you changed it. I had this issue with Adobe Flash and Where's my Water. To download apps that "are not compatible with your device" just edit your build.prop:
Code:
ro.sf.lcd_density=240
After you reboot, clear the market data and cache and you will be able to download your app. You can change your DPI back once your app is downloaded. I've had to do this on my G2 and the Tab.
Kind Regards,
Kevin
kpetrie77 said:
Hate to bump an older thread but have a fix for the market. This is not related to the FC issues mentioned in the OP but the Android market may not like your DPI setting if you changed it. I had this issue with Adobe Flash and Where's my Water. To download apps that "are not compatible with your device" just edit your build.prop:
Code:
ro.sf.lcd_density=240
After you reboot, clear the market data and cache and you will be able to download your app. You can change your DPI back once your app is downloaded. I've had to do this on my G2 and the Tab.
Kind Regards,
Kevin
Click to expand...
Click to collapse
Agreed. I haven't found any app incompatible with OC 4.0 or now 4.1.
Although I have no idea how to edit that file (n00b) ....I use LCD Resolution app to the same thing (I think).
try the new update 4.1.0
I would suggest to use Overcome 4.1.0 too. After installing the ROM just apply the Old Market Patch from OC 4.0.0.
It works well for me without any problems with downloading apps. The newer markets are much more restrictive.
works for me that way, too. Thanks!
On overcome 4.0 i had problems with the market. After installing 4.1 nowipe zip everything works perfectly
getihga54 said:
I would suggest to use Overcome 4.1.0 too. After installing the ROM just apply the Old Market Patch from OC 4.0.0.
It works well for me without any problems with downloading apps. The newer markets are much more restrictive.
Click to expand...
Click to collapse
frake said:
works for me that way, too. Thanks!
Click to expand...
Click to collapse
hundekopf23 said:
On overcome 4.0 i had problems with the market. After installing 4.1 nowipe zip everything works perfectly
Click to expand...
Click to collapse
So you lot all claiming you have no issue, can I ask what your DPI setting is?
phlooke said:
So you lot all claiming you have no issue, can I ask what your DPI setting is?
Click to expand...
Click to collapse
kpetrie77 said:
Code:
ro.sf.lcd_density=240
Click to expand...
Click to collapse
Nothing to do with the ROM. When you install 4.1.0 (or 4.0.0) it resets whatever you had back to 240. And market works.
LMFAO
I knew it. So none of you have changed DPI *after* installing OC 4.1 and *not* had the market issue.
Therefore the original comments still stand.
Jeez.
Sent from my GT-P1000 using XDA App
After 4.1.0 update installation my native browser is too slow and I lost smoothness on scrolling. Otherwise, all other apps (interface, menus, options, etc) are bettert and much more smooth.
Does anyone else check this problem? I prefer smothness on all system, include browser ^^
fearbrain said:
After 4.1.0 update installation my native browser is too slow and I lost smoothness on scrolling. Otherwise, all other apps (interface, menus, options, etc) are bettert and much more smooth.
Does anyone else check this problem? I prefer smothness on all system, include browser ^^
Click to expand...
Click to collapse
No issues like that for me.
Why dont you install a new, better browser; both Dolphin Browser and Opera Mobile are pretty good.
phlooke said:
No issues like that for me.
Why dont you install a new, better browser; both Dolphin Browser and Opera Mobile are pretty good.
Click to expand...
Click to collapse
Thanks for your reply.
Yes, I know all of these browsers, but in Overcome 4.0.0 the native browser is excelent on smoth scrolling, best ever I seen in Android...
I'll try to Wipe and made a fresh installation of 4.1.0 to check if there is really a problem.
Thks.
I'm running Overcome 3.0.1 Jupiter and am trying to wipe to 4.1.0 but I cant unzip the recovery file GB-Stock_Safe-V5. none of the zip apps I'v tried work.
Anybody know what is wrong. I've downloaded that file several times but always from the same source TeamOvercome
I was wondering why some root apps didnt work on my xperia play when they check if phone is rooted..... (For example chainfire gets loading forever like in the screenshot, while asking for superuser)
So, i was investigating with superuser app and looked at the superuser version (watch 2nd screenshot),.... Those symbols/numbers make me think that SU app has a development error or something.....
Im on .64 stock rom with darkforest kernel which is a prerooted kernel..... Maybe this causes app crashes when they are asking for root....
Can anyone tell my why happens this?? Its annoying to be always being forceclosing apps....
Thanks in advance
PD: I HAVE TO SAY THAT WHEN I CLICK ON UPDATE BINARIES IT GETS STOPPED CHECKING FOR INSTALLED VERSION (watch screenshot3 )
Mine says that under general and it works perfectly.
Sent from my R800i using XDA App
It doesn't matter what busybox version you have, problem remains
Yeah, i have installed the latest busybox version, and it usually works well, but sometimes gets like in the screenshots and have to reboot or go to settings>applications>select app> force detention to restart the app.... I think there is a bug with something...
I have installed 1.19.3 busybox version...Maybe i have to install 1.18.2, because its said that it works better.. What do you think?
Are you sure that you installed 1.19.3 ? I installed it too but stericson busybox app always reported that I have 1.16.2...
edit: Listen mate, you can check my post http://forum.xda-developers.com/showpost.php?p=20775264&postcount=1542 before some time and see yourself that I had the same problem with Doomlord's kernel and no one could've help me...
Ljanmi said:
Are you sure that you installed 1.19.3 ? I installed it too but stericson busybox app always reported that I have 1.16.2... You have to check with flashtool what busybox you have
Click to expand...
Click to collapse
I think that is impossible, because i used rummy16 busybox app... Thanks anyway, i will check it....
bamsbamx said:
I think that is impossible, because i used rummy16 busybox app... Thanks anyway, i will check it....
Click to expand...
Click to collapse
I think You can use any busybox app to uninstall and install different versions of busybox
Download and run the superuser update fixer on the market
Sent from my R800x using xda premium
Trygon said:
Download and run the superuser update fixer on the market
Sent from my R800x using xda premium
Click to expand...
Click to collapse
Thanks guy, but this app get stuck when checking for SU version.....
The few times the program works, its says that its fixed but it really is not...
Trygon said:
Download and run the superuser update fixer on the market
Sent from my R800x using xda premium
Click to expand...
Click to collapse
Ljanmi said:
Are you sure that you installed 1.19.3 ? I installed it too but stericson busybox app always reported that I have 1.16.2... You have to check with flashtool what busybox you have, uninstall your version first then install new one and check with flashtool again, I hope it helps
edit: Listen mate, you can check my post http://forum.xda-developers.com/showpost.php?p=20775264&postcount=1542 before some time and see yourself that I had the same problem with Doomlord's kernel and no one could've help me but I did it myself...
Click to expand...
Click to collapse
I am 100% sure that this issue is caused for being prerooted kernel.....
Needing some help here. Running the Express ROM and Anthrax kernel. Ran the V6 script and really liked it for about a day. I have since noticed that whenever I try and open it in script manager the V6 script says file is corrupted and the second option that worked was clicking install busybox which now says the file is corrupted as well. So I have no way to go back and try another setting or anything...any help is appreciated.
I believe the express ROM has v6 preinstalled. By you running the script, I think you might have screwed with the settings and therefore corrupted the file. This is all speculation since I haven't used the ROM in awhile nor have I used v6 since papasmurfs tweaks have been working phenomenal.
If you are really bugged about it, reflash the ROM and the v6 settings should set again
Sent from my PC36100 using xda premium
Steven 1 said:
I believe the express ROM has v6 preinstalled. By you running the script, I think you might have screwed with the settings and therefore corrupted the file. This is all speculation since I haven't used the ROM in awhile nor have I used v6 since papasmurfs tweaks have been working phenomenal.
If you are really bugged about it, reflash the ROM and the v6 settings should set again
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
exactly,what you have done is installed the older v6 over outers rom that already had the tweak installed,so it corrupted the script,in the build.prop,just reinstall the rom and kernel,but not the v6 script.
Thanks guys. I will give it a shot
Check yur pm
Sent from my PC36100 using xda premium
Thanks reply on the way
Educate me, do I want busy box?
I'm running ASOP#5 JB ROM. I installed an app wanting root access and it told me I need busy box. Do I need busy box on 4.1 or will it just make things behind the scenes messy?
Thanks
Sent from my Transformer TF101 using Tapatalk 2
If you have a custom rom installed, which you seem too, you probably already have busybox installed
Which app is asking for it? might be a bug with the app
Yup, it's a custom rom, it's Raymans Jellybean ASOP rom.
The app is android overclock which I just wanted the desktop widget from it which apparently doesn't like JB on the cold boot.
deerhurst said:
Yup, it's a custom rom, it's Raymans Jellybean ASOP rom.
The app is android overclock which I just wanted the desktop widget from it which apparently doesn't like JB on the cold boot.
Click to expand...
Click to collapse
Been keeping my eye on that one. How are you liking it so far?
I like the widget a lot. Uninstalled it since it kept crashing when the device booted. I think it's because I don't have busy box.
Still not sure if I need to install busy box with my rom or not.
I use setcpu for my overclocking.
deerhurst said:
Educate me, do I want busy box?
I'm running ASOP#5 JB ROM. I installed an app wanting root access and it told me I need busy box. Do I need busy box on 4.1 or will it just make things behind the scenes messy?
Thanks
Sent from my Transformer TF101 using Tapatalk 2
Click to expand...
Click to collapse
I'm running the same ROM and was getting errors in ROM Toolbox Pro and when I ran Root Checker Pro the busybox check says that busybox doesn't exist in the expected location. Be sure to use the one in Playstore from Stericson. After busybox install, no more errors from ROM Toolbox. This installs a busybox installer which you will need to run once after the Playstore download.
Hey Guys,
I have worked on fixing certain issues with Shenqi V4.1,Like calendar and few other. I think its a very stable ROM, have been using it for over 3 weeks. I would like to post it for you. I am no developer/Hack expert, just a curious noob. I fixed very few issues and the ROM is pretty good. Thanks a lot for Shenqi to the original developer Yicong Huang and also mchlbenner for constantly trying to provide us with the best.
Features
1)Camera and Video (native)
2)Sensors and compass
3) FM
5) Everything that the phone supports.
Drawbacks
1)Lacks proper memory management (only when you open too many apps), could be over clocked to 1Ghz though for better performance.
2)No keyboard included. Please keep a keyboard app handy.
3)No link2sd
Instructions:
1) Create a folder called nandroid on SD-card and put it inside. If you already do just copy the downloaded files inside.
2) 3 Wipes before and after.
ShenqiV41_without GAPS
Download
ShenqiV41_with_Gaps(130mb free memory)
Download
Sent from my Milestone XT720
Thanks for this ROM, this looks really complete with everything native and working. Link2SD gave me some problems with apps disappearing so i uninstalled it. If you are on XT720-2.1mod.SBF you have to apply CM7 sensor fix for correct orientation.
Yes, I've experienced the same problem with link2sd, please try over clocking to 1Ghz. This ROM is really fast then.
Sent from my Milestone XT720
Basmatek said:
Thanks for this ROM, this looks really complete with everything native and working. Link2SD gave me some problems with apps disappearing so i uninstalled it. If you are on XT720-2.1mod.SBF you have to apply CM7 sensor fix for correct orientation.
Click to expand...
Click to collapse
You need to apply the cm7 sensor fix if you are using sbf mod.
Sent from my SGH-T759 using xda premium
Is the HDMI out working?
agostinialan said:
Is the HDMI out working?
Click to expand...
Click to collapse
Sorry, I haven't checked that.
dl link not working
Awesome. Moto XT720 is still alive. I was lost my XT702 June last year.
link is dead!!
Please update link
jufece said:
link is dead!!
Click to expand...
Click to collapse
vadims746 said:
Please update link
Click to expand...
Click to collapse
Fortunately I flashed this rom several weeks ago on my wife's stone. Imho it is good for a daily driver and also one of the faster roms which are available for this device. :good:
Here is a mirror: http://www.mediafire.com/download/gkldv6kay2jmsbj/ShenqiV41_With_GAPS_nandroid.zip
Note: This is the original version incl. gapps provided by OP. You need to restore it through nandroid.
Have fun!
How install it?
Through recovery/nandroid restore.
vadims746 said:
How install it?
Click to expand...
Click to collapse
unzip, put the folder in nandroid folder, boot in recovery mode, nandroid and restore click the shenqi,