[Q] [CM7/9] battery at 99% - Defy Q&A, Help & Troubleshooting

After i flashed cm7 a long time ago i noticed that after total charging (100%), when i disconnect the phone it immediately says 99%, i have callibrated the battery and still the same... is not something too important either, but it stills bugging me :/
any help?
btw, it's a red lens defy...

thats just how it is. When plugged in its using the power from the plug and when you disconnect it, then its drawing power from the battery so it will read less. There is no helping it, just what happens it doesnt mean your phone will discharge faster or anything.

99% battery after plug off happens to me always on every rom I tried (even stock one).
Actually I don't care at all.
Bye,
Peppe

gmcgmc said:
99% battery after plug off happens to me always on every rom I tried (even stock one).
Actually I don't care at all.
Bye,
Peppe
Click to expand...
Click to collapse
On stock...? Rally? Didn't know there was a stock ROM with 1% increment. Stock ROM's only have a regular battery indicator and in battery's settings it shows the battery state in 10% increments - 100; 90; 80 and so on...

Auris 1.6 vvt-i said:
On stock...? Rally? Didn't know there was a stock ROM with 1% increment. Stock ROM's only have a regular battery indicator and in battery's settings it shows the battery state in 10% increments - 100; 90; 80 and so on...
Click to expand...
Click to collapse
I think about-status shows percentage in 1 or 5% steps not sure... din use stock much...
Sent from my MB526 using xda premium

Auris 1.6 vvt-i said:
On stock...? Rally? Didn't know there was a stock ROM with 1% increment. Stock ROM's only have a regular battery indicator and in battery's settings it shows the battery state in 10% increments - 100; 90; 80 and so on...
Click to expand...
Click to collapse
Oops Probably I've used the stock rom too little... My memory is bad. But the part on CM is true
Sorry for the misleading information,
Peppe

nogoodusername said:
I think about-status shows percentage in 1 or 5% steps not sure... din use stock much...
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
I can bet my monthly sallary on 10%

hav you tried to calibrate your battery? in play store are several tools.

Hairo The Blue Mage;26400435 i have callibrated the battery and still the same..[/QUOTE said:
He said he calibrated it. I calibrated mine with battery calibrator and with deleting battd.bin and restarting with no battery and both do exactly as he says. There is no fix its just that the battery is fuller when plugged in. If you have battery monitor the mV will go down as it stops drawing power off the plug and draws it off the battery. You can never be 100% when you are drawing power off the battery its a simple fact
Click to expand...
Click to collapse

kelbygreen said:
He said he calibrated it. I calibrated mine with battery calibrator and with deleting battd.bin and restarting with no battery and both do exactly as he says. There is no fix its just that the battery is fuller when plugged in. If you have battery monitor the mV will go down as it stops drawing power off the plug and draws it off the battery. You can never be 100% when you are drawing power off the battery its a simple fact
Click to expand...
Click to collapse
Well, i had a Moto CliqXT(Quench) running cm7 that keeped the 100% for a while after unplug, that's why i asked... but thanks for the info, i thought my battery was damaged or something like that...
maybe it's something related to the kernel, as the cliqxt have the bootloader unlocked and many optimizations were made to it's kernel... just wondering...

Related

[Q] Some questions about battery charging and voltage

Hello.
So, we all know that Android is kinda messed up regarding battery % and that we need to calibrate it in each build etc.
The thing is, when it is not calibrated and Android shows 89% when it is really 100%, won't the battery overcharge?
And why did WinMobile never had this problem? What is the method used in WinMo?
Well the basic thing is whenever you flash a new rom on your device, it looks at the current voltage of your battery and decides what percentage it has. So you will have to recalibrate the battery every time flash new rom. But to be frank I never did that and I have no problems with my battery. What I do is before flashing a new Rom I make sure to charge my phone overnight. Another thing you can do is use widgets like battery monitor widget to look at the voltage when its 100%. It should be somewhere around 4200mv.
jalshah05 said:
Well the basic thing is whenever you flash a new rom on your device, it looks at the current voltage of your battery and decides what percentage it has. So you will have to recalibrate the battery every time flash new rom. But to be frank I never did that and I have no problems with my battery. What I do is before flashing a new Rom I make sure to charge my phone overnight. Another thing you can do is use widgets like battery monitor widget to look at the voltage when its 100%. It should be somewhere around 4200mv.
Click to expand...
Click to collapse
Yeah I know that. But if it is not calibrated and for example it is 89% when the battery is 100% charged, can't it overcharge?
I noticed that when the battery reaches the appropriate voltage the current decreases from 800mA to 60mA or so... So I assume that there's some hardware check that disables charging even if the indicator shows 89%...
DeadVirus said:
Yeah I know that. But if it is not calibrated and for example it is 89% when the battery is 100% charged, can't it overcharge?
I noticed that when the battery reaches the appropriate voltage the current decreases from 800mA to 60mA or so... So I assume that there's some hardware check that disables charging even if the indicator shows 89%...
Click to expand...
Click to collapse
the battery has a chip attached to it that prevents overcharging
casemandan said:
the battery has a chip attached to it that prevents overcharging
Click to expand...
Click to collapse
Nice then
And what about windows mobile? How it always knew the right % ? Why does Android has problems with this?
DeadVirus said:
Nice then
And what about windows mobile? How it always knew the right % ? Why does Android has problems with this?
Click to expand...
Click to collapse
Windows knew it because windows was the first rom to be flashed on that device. After that we flashed another rom(android) which is not meant to be on this phone. hehe...
jalshah05 said:
Windows knew it because windows was the first rom to be flashed on that device. After that we flashed another rom(android) which is not meant to be on this phone. hehe...
Click to expand...
Click to collapse
I was not talking about stock WinMo ROM, but about when we change to a custom WinMo ROM... it is also not the first ROM but it knows the correct %...
DeadVirus said:
I was not talking about stock WinMo ROM, but about when we change to a custom WinMo ROM... it is also not the first ROM but it knows the correct %...
Click to expand...
Click to collapse
Well I am not a dev or know anything about programming side. But according to my understanding, other winmo roms are basically same as the original ROM with only some visual changes. So the files right at the system level will be unchanged mostly. But android builds are made from different phones' roms. So their system files may have to be edited....
Let's say an android phone with 5V battery rating would rate 4V as 80% whereas same ROM if put on different phone with 4V battery rating, it will still show 80% though the battery is actually 100% charged.
Though I might be wrong. Its just a guess....

battery

any ideas how i can fix this.... my battery will not charge to 100%. i have tried doin g a battery wipe.. i downloaded the battery calibrator app, and tried to wipe it, and see if it charges... and it will not go past 99%... is there something that i must do to get it to 100%... im trying to get a 100% readout, so i can do a flawless battery calibration via the app, but 99% is sort of lacking haha
My battery max charge changes depending on the theme I have installed. Sometimes I can get to 100%, and others only 97%. I find I get the same battery life in any event.
What theme are you using?
CaelanT said:
My battery max charge changes depending on the theme I have installed. Sometimes I can get to 100%, and others only 97%. I find I get the same battery life in any event.
What theme are you using?
Click to expand...
Click to collapse
just the gingerblur 4.5-----on the slide to unlock screen it says 99% and says its changing,,,, on the battery calibrator app it says 99% and it says 4187mV isnt 100% 4200mV?
Try unplugging it and letting it discharge a few percentage points and then plug it back in to charge. Sometimes it takes strangely long to go from 99-100 for me though.
KefkaticFanatic said:
Try unplugging it and letting it discharge a few percentage points and then plug it back in to charge. Sometimes it takes strangely long to go from 99-100 for me though.
Click to expand...
Click to collapse
will do buddy, im try that out and let ya know
Plugged into the wall or usb? Sometimes on usb it wont do 100% if you phone is still using alot of juice..,
try to use another battery, or an other brand battery. maybe that could work.
good luck!!!
tony.he said:
try to use another battery, or an other brand battery. maybe that could work.
good luck!!!
Click to expand...
Click to collapse
No.. Just no
Sent from my Googletron
I'm having the same issue, recalibrated and everything .... I do reach a 100 overnight though
Sent from my MB860 using XDA App

Extreme Battery Level Drop After Reboot, Increases During Use

The topic pretty much explains it. I've been using different modified stock roms and now I'm on the latest nightly of CM7, and I keep having this issue. After a reboot at around 50%, the battery drops to 15%. The weird part is that while I continue to use the phone, it slowly rises back up to sometimes 30% and then starts going back down. I've always cleared battery stats when flashing and calibrated (which I believe is unnecessary), but I don't know if this is a problem with the battery, the phone, or if anyone else is having the same issue?
Attached is a screenshot of battery usage. You can see I never actually charged the phone.
Sent from my GT-I9100 using Tapatalk
I have exactly the same issue.
Sent from HydrOG3N MOD S2.
Technology Evolves, Android Evolves.
HydrOG3N is THE Revolution.
[email protected] looks like a bow and arrow..
anyway guys, you need to recalibrate your battery, its not being read accuracy.
download BatteryCalibration from the market, charge your phone till 100% (not just 100% but when it beeps, that its truely at 100%), then use BatteryCalibration to calibrate your battery, and then drain it to 0.. (crank full brightness, turn on LED flashlight, blast internet radio, whatever makes it drain faster to get this part overwith), then recharge it to max.
so;
charge to full 100%
while still plugged in, run BatteryCalibration
discharge to 0%
recharge to 100%
battery successfully calibrated, you will now have an accurate reading
I had exactly the same issue on 3 different custom roms....finally resolved by going bck to stock rom
mgxplyr said:
The topic pretty much explains it. I've been using different modified stock roms and now I'm on the latest nightly of CM7, and I keep having this issue. After a reboot at around 50%, the battery drops to 15%. The weird part is that while I continue to use the phone, it slowly rises back up to sometimes 30% and then starts going back down. I've always cleared battery stats when flashing and calibrated (which I believe is unnecessary), but I don't know if this is a problem with the battery, the phone, or if anyone else is having the same issue?
Attached is a screenshot of battery usage. You can see I never actually charged the phone.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Sent from my GT-I9100 using XDA App
soraxd said:
[email protected] looks like a bow and arrow..
anyway guys, you need to recalibrate your battery, its not being read accuracy.
download BatteryCalibration from the market, charge your phone till 100% (not just 100% but when it beeps, that its truely at 100%), then use BatteryCalibration to calibrate your battery, and then drain it to 0.. (crank full brightness, turn on LED flashlight, blast internet radio, whatever makes it drain faster to get this part overwith), then recharge it to max.
so;
charge to full 100%
while still plugged in, run BatteryCalibration
discharge to 0%
recharge to 100%
battery successfully calibrated, you will now have an accurate reading
Click to expand...
Click to collapse
I'll try this one more time and report back.
mgxplyr said:
I'll try this one more time and report back.
Click to expand...
Click to collapse
Sorry guys, but your method with BatteryCalibration is useless ....
If you wanna do a correct calibration, look at here http://forum.xda-developers.com/showthread.php?t=1312273
Cheers
Put back the battery on the right side.
8. Turn on the phone.
9. Pray the Battery god
And that post is just nonsense based on the old battery bump method .
jje
mgxplyr said:
The topic pretty much explains it. I've been using different modified stock roms and now I'm on the latest nightly of CM7, and I keep having this issue. After a reboot at around 50%, the battery drops to 15%. The weird part is that while I continue to use the phone, it slowly rises back up to sometimes 30% and then starts going back down. I've always cleared battery stats when flashing and calibrated (which I believe is unnecessary), but I don't know if this is a problem with the battery, the phone, or if anyone else is having the same issue?
Attached is a screenshot of battery usage. You can see I never actually charged the phone.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
i have the same problem when i use custom roms.
i have been using pure stock rom by wannam but rooted for the past week with 12 hours aday syncing and surfing the net and plenty of voice calls via viber and my battery lasts at least 16 to 18 hours.
right now i am using odexed KL3 Kernel KL2Base KL1modem 2.3.6 and it is absolutely amazing interms of battery life and performance.
http://forum.xda-developers.com/showthread.php?t=1292825
http://www.multiupload.com/06I066U6S8
i have gotten rid of all samsung craps through titanium backup. i only have samsung apps application cuz of some paid apps which are for free such as tapatalk and many more on samsung app store.
my free memory is 97mb (original rom free memory is only 27mb)
i dont use any task killers i use 1Tapcleaner pro.
JJEgan said:
Put back the battery on the right side.
8. Turn on the phone.
9. Pray the Battery god
And that post is just nonsense based on the old battery bump method .
jje
Click to expand...
Click to collapse
Maybe, you wanna share a better way to all of us ?
Are you using speeded kernel. If you are then it is because logging and debugging is off.
Sent from my GT-I9100
Completely stock phone never rooted.
Same problem.
Just sayin'
Sent from my GT-I9100 using XDA App
Got the same here, very strange, on CM7
Sent from my GT-I9100 using XDA App
This thing only happens on CM7 for me. It had 40% before reboot and like 15% after. However mine only increased to about 17% then started dropping as usual. This never happened on any stock ROMs I've tried(stock, not themed/modded stock).
Sent from my GT-I9100 using xda premium
did you
did you rsolve the problem ? how? I have the same problem and I tried more stock roms ... I don't know what tot do ....
Its nothing to do with calibration etc, its just how the fuel gauge chip works, it learns and more accurately reports usage over time. For example, if you reboot and (I can't remember the actual voltages for the S2) you have 1200mV, the chip goes, "ah, that is 15% battery." Then as you use it more, it relearns its settings and goes "aaah, my mistake 1200mV is really 30% battery. I'll display that instead."
Its been covered frequently that "calibrating" the battery of the S2 in any way but actually using it, is next to useless.
Sent from my GT-I9100 using xda app-developers app
---------- Post added at 11:05 AM ---------- Previous post was at 11:03 AM ----------
Also just noticed this thread is a year old, but hopefully it will help the poster above.
Sent from my GT-I9100 using xda app-developers app
I'm having this problem too, what did you all do besides get new phones?
Got the same here, after update stock jellybean
Had this problem, when my S2 was half a year old.
I got the original Extended Battery and that solved this issue completely.
The replacement Battery has held up since 2013
soraxd said:
[email protected] looks like a bow and arrow..
anyway guys, you need to recalibrate your battery, its not being read accuracy.
download BatteryCalibration from the market, charge your phone till 100% (not just 100% but when it beeps, that its truely at 100%), then use BatteryCalibration to calibrate your battery, and then drain it to 0.. (crank full brightness, turn on LED flashlight, blast internet radio, whatever makes it drain faster to get this part overwith), then recharge it to max.
so;
charge to full 100%
while still plugged in, run BatteryCalibration
discharge to 0%
recharge to 100%
battery successfully calibrated, you will now have an accurate reading
Click to expand...
Click to collapse
did it but it still there... phone flicks and goes off at or below 40% wont turn on again:crying:
same here and I got the 2000 mAh samsung battery back in the days but now it happens with both of them also when my phone shuts off the screen brightness start flashing weirdly

Battery performance after ROM Upgrade

I just flashed SyNthetic_aospX 1.0.0-BR7 on my HTC Glacier and started observing a little weird behavior with it. It died of battery, but when I restarted it, the phone showed 10% battery remaining.
I switched off and put it on charging, after 1.5 Hr, the charging indicator was still yellow but I switched on the phone and boom, it showed 100% charging and the led turned green. To double check I switched off the phone and plugged in, it was still showing yellow led. After around 45 mins, the battery was fully charged in off mode.
Is this some behavior known to anyone? Or it is time for my battery (my phone is still with original battery and it's almost 2 years).
Any help is highly appreciated ...
Well, first off, did you flash at 100% battery?
Second, is your battery swollen at all? It probably is after 2 years. I had to replace mine after a little over a year.
I can tell you that, even on CM7, I leave my charger off while in recovery because it might say 50%, but as soon as I reboot it might say 70%. A magical 20% increase in 45 seconds. Still, your battery behavior is off. If you decide to replace it, check out Anker.
Don't forget to flash another ROM to compare battery behavior.
estallings15 said:
Well, first off, did you flash at 100% battery?
Second, is your battery swollen at all? It probably is after 2 years. I had to replace mine after a little over a year.
I can tell you that, even on CM7, I leave my charger off while in recovery because it might say 50%, but as soon as I reboot it might say 70%. A magical 20% increase in 45 seconds. Still, your battery behavior is off. If you decide to replace it, check out Anker.
Don't forget to flash another ROM to compare battery behavior.
Click to expand...
Click to collapse
Thanks estallings15, I initially flashed at < 100% but then realized my mistake so did a full wipe and then charged it to 100% (when powered off). And then flashed it again.
Seems my battery is little swollen, can't say though, I would give it a shot to replace it.
I tried another ROM but did not use it for full battery cycle, as I just love this ICS
If you decide to replace it, check out Anker.
Click to expand...
Click to collapse
Should I buy Anker or OEM ?
rushfunn said:
Should I buy Anker or OEM ?
Click to expand...
Click to collapse
For me, Anker is at least as good as OEM if not better, as well as cheaper. Answer your question?
I am using the same ROM. My battery life isn't very good either..!
estallings15 said:
For me, Anker is at least as good as OEM if not better, as well as cheaper. Answer your question?
Click to expand...
Click to collapse
Yupp, it does, thanks. I'll give it a try to Anker and see ... This ROM is so sweet ...
mokee92 said:
I am using the same ROM. My battery life isn't very good either..!
Click to expand...
Click to collapse
I know, but this ROM is so awesome to leave ... But its good to know that I'm not alone

[Q] Miscalibrated battery, need help!

I need some suggestions on how to calibrate the battery on my n4. It got miscalibrated when I did the update 4.2 to 4.3 and I haven't been able to calibrate it since then, a week ago.
I tried using battery calibration from the store but it didn't work, I tried charging the phone from 0 to 100 and it didn't work.
I remember I had the same problem 2 years ago with my Atrix and I solved it by wiping the battery stats from recovery, but now twrp and Cwm removed this feature and I don't know how to solve my problem.
Maybe it would help flashing all back to stock with the toolkit?
If you have any suggestions I'd really appreciate it.
http://forum.xda-developers.com/showthread.php?t=1460553
qoolix said:
http://forum.xda-developers.com/showthread.php?t=1460553
Click to expand...
Click to collapse
Just the answer I didn't expected, and frankly a pretty useless answer, everybody knows that battery calibration doesn't improve battery life.
But I have other problems, like I turn off my device at 80% and when I turn it on it's at 77%. Do you think that's normal?
Elwood_It said:
Just the answer I didn't expected, and frankly a pretty useless answer, everybody knows that battery calibration doesn't improve battery life.
But I have other problems, like I turn off my device at 80% and when I turn it on it's at 77%. Do you think that's normal?
Click to expand...
Click to collapse
Either faulty battery or do the following:
1.Completley discharge N4
2.Charge fully(+2 hours after hitting 100&) WITHOUT disconnecting from the charger.
3.Repeat for better results.
Sent from my Nexus 4 using xda app-developers app
failly said:
Either faulty battery or do the following:
1.Completley discharge N4
2.Charge fully(+2 hours after hitting 100&) WITHOUT disconnecting from the charger.
3.Repeat for better results.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the answer. Should I carghe while it's off or on or it doesn't matter?
Elwood_It said:
Thanks for the answer. Should I carghe while it's off or on or it doesn't matter?
Click to expand...
Click to collapse
To be honest, I don't know.
But if I would be you I would just let it charge while it's off(So the big ass white battery icon).
Let me know if you got your battery sorted after the method I posted!
Elwood_It said:
Just the answer I didn't expected, and frankly a pretty useless answer, everybody knows that battery calibration doesn't improve battery life.
But I have other problems, like I turn off my device at 80% and when I turn it on it's at 77%. Do you think that's normal?
Click to expand...
Click to collapse
You mean off as in all the way off? If so, then that ~3% is being used when the phone boots.
korockinout13 said:
You mean off as in all the way off? If so, then that ~3% is being used when the phone boots.
Click to expand...
Click to collapse
I've had many phones, and none of them lost charge during the boot, at least not that many. I think that's the clear sign of battery miscalibration, I've had this problem before with another phone. Besides that, I've had a strange behaviour of the battery, for example I saw it lose 4% in 1 second, from 66 to 62 in a blink of an eye.
Elwood_It said:
I've had many phones, and none of them lost charge during the boot, at least not that many. I think that's the clear sign of battery miscalibration, I've had this problem before with another phone. Besides that, I've had a strange behaviour of the battery, for example I saw it lose 4% in 1 second, from 66 to 62 in a blink of an eye.
Click to expand...
Click to collapse
It's not that it's losing charge quickly, it's just the OS (or the hardware itself) doesn't always do the best job of reading it. There's not much you can do about that, and it's really not an issue unless you make it so by staring at your battery level all day.
korockinout13 said:
It's not that it's losing charge quickly, it's just the OS (or the hardware itself) doesn't always do the best job of reading it. There's not much you can do about that, and it's really not an issue unless you make it so by staring at your battery level all day.
Click to expand...
Click to collapse
Hi,
I'm having a similar issue. Phone rebooting to weird battery levels (not the %age it shutdown at).
Phone shutting down at 31% battery and rebooting to 0%.
I tried charging only to 100% yesterday with the phone ON.
Do I have to charge it even after it's charged to 100%?
failly said:
To be honest, I don't know.
But if I would be you I would just let it charge while it's off(So the big ass white battery icon).
Let me know if you got your battery sorted after the method I posted!
Click to expand...
Click to collapse
I tried charging through the night and then discharging it completely and charging it completely again. I also tried deleting the batterystats file (even though I know it doesn't do anything)
So what do you suggest I should do? Get the phone replaced or get the battery changed?
I live in India and the phone is from Canada, so replacing the phone will take some time but I can get the battery replaced for around $20
Also my nexus is also showing +ve mA values while it's not charging, and the values are absolutely crazy, +268, +168, +1171 (in batter monitor widget)
Please tell me what I should do.
japmeet said:
I tried charging through the night and then discharging it completely and charging it completely again. I also tried deleting the batterystats file (even though I know it doesn't do anything)
So what do you suggest I should do? Get the phone replaced or get the battery changed?
I live in India and the phone is from Canada, so replacing the phone will take some time but I can get the battery replaced for around $20
Also my nexus is also showing +ve mA values while it's not charging, and the values are absolutely crazy, +268, +168, +1171 (in batter monitor widget)
Please tell me what I should do.
Click to expand...
Click to collapse
Before you replace the battery try to disconnect the battery's flex cable and reconnect it [after you charge to device to 100% and turn it off of course] check if its 'reset' the battery.

Categories

Resources