Related
Not fully root on ics? Well no need to go back to rooted gingerbread to gain root again. No mobile odin ore odin app. And the best of all, no yellow triangel
1.First do a titanium back up.
2.All you need is the cwm app.
3.Download zip and unzip it.
4.Place firmware folder on external sd card and go to cwm app.
5.Than press Flash stock firmware.
6.Than pres continue.
7.You see app does not flash bootloaders, ignore and press continue.
8.You see warning about loosing root bla bla IGNORE and press continue.
9.Than press Flash normaly because i put the chainfire rooted kernel in the folder.
If it hangs on installing update, Just press power button for 8 sec. And do dalvic cache wipe and reboot, happend to me but seconde time will work.
Now your are on a fully rooted ics. The best base for installing a custom ics.
Dw http://speedy.sh/sUYRY/firmware.zip
If you are on rooted gingerbread you can do this to you must i would say. Never flash a custom ics when coming from gingerbread!!!
You need a fresh install, i recommand this.
probably should have been in general...
hkgrob said:
probably should have been in general...
Click to expand...
Click to collapse
No after this your on a rooted ics if you want to leaf it like that. chinese ics odexed rom with chainfire rooted kernel.
why is this in the dev section? this should be as said in general
Wow... not to be evil but that's a weird howto ...
| GalaxyNote ICS | Tapatalk |
Reb0rn said:
Wow... not to be evil but that's a weird howto ...
| GalaxyNote ICS | Tapatalk |
Click to expand...
Click to collapse
What do you mean? Weird is using odin i think. And no pc needed.
so this is basically equivalent to flashing the chainfire ics repack before flashing a custom rom then
Richy99 said:
so this is basically equivalent to flashing the chainfire ics repack before flashing a custom rom then
Click to expand...
Click to collapse
No, chainfire is with odin app. Odin app is a paid app. Cwm app not. Not every one wants pay for a app.
I don't see an option for "5.Than press Flash stock firmware." am I missing something?
Thanks.
fig_jam_uk said:
I don't see an option for "5.Than press Flash stock firmware." am I missing something?
Thanks.
Click to expand...
Click to collapse
Please ignore this ^^^ I was being n00bish, thanks on the way, it allowed me to get to the point where I could reflash ICS and un semibrick my Note, thanks I now have full root
robertberma said:
No, chainfire is with odin app. Odin app is a paid app. Cwm app not. Not every one wants pay for a app.
Click to expand...
Click to collapse
Apps that is good for developing and can give the amazing developer some cash for their hard work should all of us who is interested of flashing buy.
Ive done it and i could give even more fore those apps
Sent from my GT-N7000 using xda premium
Reb0rn said:
Wow... not to be evil but that's a weird howto ...
| GalaxyNote ICS | Tapatalk |
Click to expand...
Click to collapse
+1
I strongly advise to not play with ICS unless you dont exactly know what you are doing and these instructions are just a joke
Inviato dal mio GT-N7000 usando Tapatalk
Is there an easy way to get something VERY close to stock final ICS but with root and cwm?
I'm not a fan of custom kernels and custom roms.
Sent from my LT18i using Tapatalk 2
Flash official ICS, flash custom kernel , the modded stock one, flash the superuser fix , download busybox
Stock ICS with route and cwm
No other way
Sent from my LT18i using xda premium
CrazyPeter said:
Is there an easy way to get something VERY close to stock final ICS but with root and cwm?
I'm not a fan of custom kernels and custom roms.
Sent from my LT18i using Tapatalk 2
Click to expand...
Click to collapse
if you are unlocked to don't have to keep the custom kernel. you can just hotboot the kernel, flash the zip and then reboot and it will be like you never flashed the kernel but you will be rooted.
Pvy.
pvyParts said:
if you are unlocked to don't have to keep the custom kernel. you can just hotboot the kernel, flash the zip and then reboot and it will be like you never flashed the kernel but you will be rooted.
Pvy.
Click to expand...
Click to collapse
Huh?
Yes, I have a unlocked bootloader, but can you flesh out the above details a little bit, as it makes no sense to me
Simple
Flash.custom kernel.with flashtoll
Download superuser.zip from doomed151 in original thread
Flash the superuser.zip through cwm
Download busybox from market
There you have root
Sent from my LT18i using xda premium
chiefy009 said:
Simple
Flash.custom kernel.with flashtoll
Download superuser.zip from doomed151 in original thread
Flash the superuser.zip through cwm
Download busybox from market
There you have root
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
Where does ICS fit into that? It's not even mentioned? What's flashtoll?
CrazyPeter said:
Huh?
Yes, I have a unlocked bootloader, but can you flesh out the above details a little bit, as it makes no sense to me
Click to expand...
Click to collapse
or
boot into fastboot mode
get kernel boot.img with CWM
http://forum.xda-developers.com/showthread.php?t=1591279
then run the command
Code:
fastboot boot boot.img
be sure to spam vol - or back or what ever the kernel requres to get into CMW on reboot.
flash the SU.zip
http://downloads.androidsu.com/superuser/Superuser-3.0.7-efghi-signed.zip
cant remember who linked that one
reboot and the kernel will be gone
enjoy rooted phone.
Pvy.
CrazyPeter said:
Huh?
Yes, I have a unlocked bootloader, but can you flesh out the above details a little bit, as it makes no sense to me
Click to expand...
Click to collapse
You need fastboot.exe. If you have it then first download the SuperUser zip file from here:
http://forum.xda-developers.com/showpost.php?p=24825517&postcount=105
And put it on your SD card.
Then download any kernel that has CWM support. There is one here:
http://forum.xda-developers.com/showpost.php?p=24826349&postcount=110
Then put your phone into fastboot mode (turn it off then plug it in while holding the Back button - the LED will turn BLUE - if it doesn't then try plugging in while holding the MENU button instead, I can never remember which one it is).
Then copy the kernel to your device like this:
fastboot boot recoveryARC.img
Your device will reboot - when the SONY logo goes bright start spamming the VOLUME DOWN button to enter Recovery.
Then flash the SuperUser.zip file from your SD card. Unplug the phone, reboot and you have root access. You should then head to Google Play and download Busybox Installer and install the latest release.
Good luck.
Isn't this the naff Chinese leaked build? Not the final one?
I think i'll wait for the dust to settle, too much hacking and failure stories right now, along with "fluff" from leaked betas and prereleases and lt15i owners trying to get stuff working.
This is the final release. I love it FWIW.
However, installing it was a PITA - I bricked my device three times before I got it right using Flashtool. But it's worth it - I've been running the beta since it was released and the performance of the final release is MUCH better.
Plus they seem to have supercharged the launcher - I'm only getting a redraw if I've been running a heavy game (Temple Run for example). The beta version would reload the launcher a lot.
There will be a new version of Flashtool that will allow the official FTF to be flashed without all the hassle - might be worth waiting for. The issue is with changing the partition table or something.
only fastboot doomkernel
then install su by recovery
then flash stock kernel by flash tool & exclude all other option
and reboot
please can someone find a way too root this firmware without unlocking the bootloader??
omarfaieq007 said:
please can someone find a way too root this firmware without unlocking the bootloader??
Click to expand...
Click to collapse
You might have a long wait. The .62 release never got rooted.
Sent from my LT18i using XDA App
if i unlock bootloader then
flash ics using flashtool
custom karnel or hotboot(how to work with hotboot?)
recovery img (optional)
su by recovery
after that if i lock bootloader.... ll root work ? n can i get ota future updates ?
chiefy009 said:
Flash official ICS, flash custom kernel , the modded stock one, flash the superuser fix , download busybox
Stock ICS with route and cwm
No other way
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
Well, there IS one-click-root method, hmm... 3 clicks actually, for stock ICS ROM without unlocking your bootloader.
Here is the link.
http://goo.gl/CSFB0
You may not know Chinese, but I personally don't intend to translate it and write an instruction because I am not the pioneer who needs to be respected.
TenkaTsai said:
Well, there IS one-click-root method, hmm... 3 clicks actually, for stock ICS ROM without unlocking your bootloader.
Here is the link.
http://goo.gl/CSFB0
You may not know Chinese, but I personally don't intend to translate it and write an instruction because I am not the pioneer who needs to be respected.
Click to expand...
Click to collapse
how did u sort out it's without unlocking bootloader
can anyone from china confirm or at least translate?google translate fails..
TenkaTsai said:
Well, there IS one-click-root method, hmm... 3 clicks actually, for stock ICS ROM without unlocking your bootloader.
Here is the link.
http://goo.gl/CSFB0
You may not know Chinese, but I personally don't intend to translate it and write an instruction because I am not the pioneer who needs to be respected.
Click to expand...
Click to collapse
Can you upload that rar file here?
here the root file for ics but i didnt check
regards
rasgula said:
here the root file for ics but i didnt check
regards
Click to expand...
Click to collapse
Thank you so much..I will try and report back..
Edit: I ran the command..nothing happens after restart and no superuser..it recognizes the phone though..
Doesn't work on ARC S. tried on Official ICS released yesterday.
Hey i've soft bricked my n7000..
basically i just need to know what exactly to do now, kernels etc
ideally id like to be running Midnote 3.3
anyone kind enough to reply with help would be seriously appreciated!
Maybe if you gave some more information on what how when and why ?
Nobody can help you on a 'hey i lost my car can someone tell me where on this planet i parked this morning?'
Agree on above poster. We need to know what rom uou were flashing from, by what method, and the issue now.
Sent from my GT-N7000 using xda premium
Fair enough was thinking there was a straight forward fix, as in just flash this and do this etc..
i was running Midnote 2.1, i was on LP1 and tried to flash Midnote 3.3 using CWM.. it wasn't flashing as i couldn't see the .zip rom at all..
i then done a few factory wipes and basically just wiped the davlik and cache and tried any options in CWM
The issue now is that when i boot im stuck at the samsung splash screen..
I can boot into recovery and into cwm..
And what exactly happends now ?
dead black screen ?
Samsung logo blocked ?
PC odin doesn't connect ?
Can you enter CWM recovery ?
Can you enter boot recovery ?
I think you better try and flash a safe GB kernel and rom first
Then do a full wipe, then flash whatever you like.
You can best flash through PC odin for the stock GB
friedje said:
And what exactly happends now ?
dead black screen ?
Samsung logo blocked ?
PC odin doesn't connect ?
Can you enter CWM recovery ?
Can you enter boot recovery ?
Click to expand...
Click to collapse
Stuck at Samsung logo
Can enter CWM and recovery, odin works as far as i can tell
I would suggest trying to flash a stock gb rom via pc odin. If you get stuck at the factory.fs stage you may well be superbricked because of the cwm recoveries and wipes on lpy.
There are a few threads on sorting out a problematic emmc section. But we'll get to that afyer youve tried this.
Sent from my GT-N7000 using xda premium
friedje said:
And what exactly happends now ?
dead black screen ?
Samsung logo blocked ?
PC odin doesn't connect ?
Can you enter CWM recovery ?
Can you enter boot recovery ?
I think you better try and flash a safe GB kernel and rom first
Then do a full wipe, then flash whatever you like.
You can best flash through PC odin for the stock GB
Click to expand...
Click to collapse
Thank you, I don't mean to be an effort but you hardly know where I can get a safe GB kernel and rom? i just want to be sure as im getting kind of worried now
Check out dr ketans thread in the stickies of d3velopment section. Theres loaf of info there. Its pretty straight forward if you flash initially to an older rom for your region. Take a look itll make sense promise.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
Check out dr ketans thread in the stickies of d3velopment section. Theres loaf of info there. Its pretty straight forward if you flash initially to an older rom for your region. Take a look itll make sense promise.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks bro, one thing though... i bought this n7000 fully unlocked but i think it was from Poland or somewhere does it matter if i flash a uk gb rom? stupid question i know but want to be sure.. thanks
liam.ire said:
Thanks bro, one thing though... i bought this n7000 fully unlocked but i think it was from Poland or somewhere does it matter if i flash a uk gb rom? stupid question i know but want to be sure.. thanks
Click to expand...
Click to collapse
Doesn't really matter, go ahead and choose what you like.
Lads i seriously appreciate this.. if i get my note back up n running i'll be delighted!
so if when i flash this stock gb rom using Odin i don't need a kernel at all right?
again these must be frustrating questions but your really helping me out here
liam.ire said:
Lads i seriously appreciate this.. if i get my note back up n running i'll be delighted!
so if when i flash this stock gb rom using Odin i don't need a kernel at all right?
again these must be frustrating questions but your really helping me out here
Click to expand...
Click to collapse
No, you just place the .tar file in Odin in the PDA section.
liam.ire said:
Lads i seriously appreciate this.. if i get my note back up n running i'll be delighted!
so if when i flash this stock gb rom using Odin i don't need a kernel at all right?
again these must be frustrating questions but your really helping me out here
Click to expand...
Click to collapse
nope you dont need a kernel when flashing stock GB rom
but 1st keep ur fingers crossed and pray that you get through the ODIN installation method
copy the GB rom file in ODIN folder and open ODIN and click on PDA and select the downloaded GB ROM file and press START
You legends! the stock gb rom worked perfect...
now comes the slightly trickier part.. loading the Midnote 3.3 rom
anyone using this rom? 2.1 was great!
whats the safest way to flash this, kernel wise etc?
thanks again lads
also, now that im back on the stock gb rom.. do i need to root again????
i tried getting into cwm and it brought me into android recovery mode ( still had install zip from sd option)
liam.ire said:
also, now that im back on the stock gb rom.. do i need to root again????
i tried getting into cwm and it brought me into android recovery mode ( still had install zip from sd option)
Click to expand...
Click to collapse
Yes, you will need to root it if you didn't flash a GB pre-rooted ROM.
And I think the CWM.zip file is on drketan's thread.
Guys im running midnote rom fine BUT it keeps vibrating every 5-8 seconds........................
EXTREMELY FRUSTRATING.. any ideas!???
Hey guys,
So basically, i rooted using using a guide i found here on XDA, worked great, did it with CWM.zip and SU-Busybox-Installer.zip, Went real easy for a noob like me!
The problem ive got now, i dont seem to have a proper copy of CMW recovery installed, just the stock recovery.
This wouldnt be too much of a problem, however i read the follow :
http://www.theandroidsoul.com/insta...xy-note-on-xxlpy-ice-cream-sandwich-firmware/
This is worrying, it sounds to be more difficult to install a proper CMW recovery than it is too root on this build number : IML74K.XXLPY
Overall, all im aiming for this Kernel :
http://forum.xda-developers.com/showthread.php?t=1749863
And this ROM :
http://forum.xda-developers.com/showthread.php?t=1716088
(Performance, stock rom with a little OC basically, if you know easier/better combinations, please link them!)
If any of u clever folk know where i can find me some idiot friendly information/links/guides to pull what (I think) is a mammoth task, please feel free to point me in the right way.
Thanks in advance, Sorry for what might seem like daft questions
Is downgrading to GB a must or can i just install a new ROM with mobile ODIN pro?
Its best so you can do a clean install
Its all in dr ketans thread, in sticky section of development
Sent from my GT-N7000 using Tapatalk 2
Many thanks for replying, i looked at that but i couldnt find a GB rom that matched my baseband, is that a problem?
Sent from my GT-N7000 using xda app-developers app
Nope, its all about csc, *272*youremeinumber#* in dialer
Baseband you mean modem? Modem doesnt matter anyway
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
Nope, its all about csc, *272*youremeinumber#* in dialer
Baseband you mean modem? Modem doesnt matter anyway
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Do efs backup, check my profile then threads, before doing anything
Sent from my GT-N7000 using Tapatalk 2
Connection problem or invalid MMI
Sent from my GT-N7000 using xda app-developers app
*#272*Device IMEI# works for me, should have guessed that it was the netherlands GB rom, CSC 'zen', ill download that tonight then.and all i gotta do is flash with pc odin?
Sent from my GT-N7000 using xda app-developers app
What you should do is:
- Download a GB rom from SamMobile, Preferably a directly rootable one (i suggest KKA).
- Download ODIN
- Flash the GB Rom via Odin (open the rom in the PDA section), don't worry flashing an official rom wont raise your flash counter.
- Download the InitialCFRootFlasher.zip and this CF-Root Kernel.
- Extract the files (repeat for the zImage).
- Place the zImage file from the CF-Root kernel in the zImage folder from InitialRootFlasher.
- Start "not-rooted-yet.bat" and follow the instructions.
When finished you will have a rooted GB rom.
Next you would like to flash the ICS LPY Rom.
- Download the LPY ROM.
- Download the CF-Root Kernel.
- Extract the files (repeat for the zImage)
- Place both files on your SD card.
- Install MobileOdin.
- Install the Device Specific files.
- Press 'Open File' and select the LPY Rom.
- Press 'Kernel' and select the zImage.
- Enable EverRoot, SuperSU , Inject Mobile ODIN and Wipe Dalvic cache.
- Flash firmware.
When rebooted you will have a rooted LPY rom with CWM and busybox.
Dont mix the zImages up or else your screwed.
I do not take credit for this tutorial ,this is thanks to Chainfire and his hard work so if you like it, please donate to him.
Is it not necessary to download a GB rom one with a matching csc?
Sent from my GT-N7000 using xda app-developers app
MrBoldy said:
Is it not necessary to download a GB rom one with a matching csc?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
What do you mean with matching CSC? What region are you from?
Netherlands, thats the one i previously downloaded
Sent from my GT-N7000 using xda app-developers app
Ok i'm also from the Netherlands so if you stick to the tutorial on the previous page it will work out for you!
Sent from my GT-N7000 using xda premium
Ill do this after work then, one last question though guys, is the ICS in that guide classed as a safe kernel which i can mobile odin flash the rom and kernel i linked on the original post?
Sent from my GT-N7000 using xda app-developers app
MrBoldy said:
Ill do this after work then, one last question though guys, is the ICS in that guide classed as a safe kernel which i can mobile odin flash the rom and kernel i linked on the original post?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
These CF-Root kernels are stock kernels modified by Chainfire. He pre-rooted the kernel and added CWM, BusyBox and SuperSU. These kernels are considered safe if you stick to the tutorial by the letter!!.
help!
lodi said:
What you should do is:
- Download a GB rom from SamMobile, Preferably a directly rootable one (i suggest KKA).
- Download ODIN
- Flash the GB Rom via Odin (open the rom in the PDA section), don't worry flashing an official rom wont raise your flash counter.
- Download the InitialCFRootFlasher.zip and this CF-Root Kernel.
- Extract the files (repeat for the zImage).
- Place the zImage file from the CF-Root kernel in the zImage folder from InitialRootFlasher.
- Start "not-rooted-yet.bat" and follow the instructions.
When finished you will have a rooted GB rom.
Next you would like to flash the ICS LPY Rom.
- Download the LPY ROM.
- Download the CF-Root Kernel.
- Extract the files (repeat for the zImage)
- Place both files on your SD card.
- Install MobileOdin.
- Install the Device Specific files.
- Press 'Open File' and select the LPY Rom.
- Press 'Kernel' and select the zImage.
- Enable EverRoot, SuperSU , Inject Mobile ODIN and Wipe Dalvic cache.
- Flash firmware.
When rebooted you will have a rooted LPY rom with CWM and busybox.
Dont mix the zImages up or else your screwed.
I do not take credit for this tutorial ,this is thanks to Chainfire and his hard work so if you like it, please donate to him.
Click to expand...
Click to collapse
Hey guys, followed by the book, cant even get past the initial setup screen, just crashes every application it tries to start as soon as i 'press the android', so im stuck at the moment, hopefully its not beyond rescue!
EDITED: So, i did a factory reset as i was already GB, works fine, flashed ICS LPY with mobile odin, got CWM and busybox, now its time to flash the custom ROM, which option in PC odin so i select for choosing the kernel zimage?
is it bootload/pda/phone or csc. according to the guide for the rom im interested in which is in my OP, i need to flash kernel FIRST
thanks so far guys, all the information has been correct and im almost done
One more thing though, the samsung keyboard is still typing null on key entry on this ICS also, is this something i should worry about? i prefer swiftkey either way!
Im now running a custom ROM and Kernel, scary stuff, but so much more comfortable with the process now, this is due to Lodi and Baz77, Many thanks to you both!
Its all my pleasure!
1 tip, don't wipe while in ICS...xD
Sent from my GT-N7000 using xda premium
lodi said:
Its all my pleasure!
1 tip, don't wipe while in ICS...xD
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
+1,
You can with save kernel, however
always reboot recovery when on save kernel so you are on save kernel recovery should you wish to wipe, and share the knowledge!
Sent from my GT-N7000 using Tapatalk 2
Hey everyone.
I tried updating my CWM via odin, I did everything as normal.
However when the phone boots back up, It says ( in the top left hand corner )
RECOVERY BOOTING
set warranty bit : recovery
When I put it back into download mode and back into odin, it came up with the green 'pass'
I have tried taking out the battery, and then entering into bootloader, but the phone just resets and comes back up with the same message. There is no way for me to get into bootloader
I need help please guys
kentykentkent said:
Hey everyone.
I tried updating my CWM via odin, I did everything as normal.
However when the phone boots back up, It says ( in the top left hand corner )
RECOVERY BOOTING
set warranty bit : recovery
When I put it back into download mode and back into odin, it came up with the green 'pass'
I need help please guys
Click to expand...
Click to collapse
It's normal. The Knox bootloader only like its modules stock.
Whit a Customer Recovery we have : set warranty bit: recovery
Whit a new modem we have : set warranty bit: modem
Whit a new kernel we have : set warranty bit : kernel but in this case we can have at boot "Secure Fail: Kernel" in red and not reboot. May be.
This arrived to me on another device w/ Knox bootloader also.
SO what do I do mate?
ValenteL said:
It's normal. The Knox bootloader only like its modules stock.
Whit a Customer Recovery we have : set warranty bit: recovery
Whit a new modem we have : set warranty bit: modem
Whit a new kernel we have : set warranty bit : kernel but in this case we can have at boot "Secure Fail: Kernel" in red and not reboot. May be.
This arrived to me on another device w/ Knox bootloader also.
Click to expand...
Click to collapse
Hey mate.
Ok, so what do I do now?
Just wait for it to boot?
kentykentkent said:
Hey mate.
Ok, so what do I do now?
Just wait for it to boot?
Click to expand...
Click to collapse
having the same issue and using a fooking mac aint helping...:silly:
check out my thread pc user using mac, maybe either one of us will get a response/fix and can help each other
apanayis said:
having the same issue and using a fooking mac aint helping...:silly:
check out my thread pc user using mac, maybe either one of us will get a response/fix and can help each other
Click to expand...
Click to collapse
Ah I hate when people aren't online and can't help.
I can get into download mode, but I can't even get into bootloader...
Did evrything the same as I have done 10x before, I am guessing it could be a dodgy file we flashed?
Have you tried flashing an older version of CWM ?
I am going to try now..
kentykentkent said:
Ah I hate when people aren't online and can't help.
I can get into download mode, but I can't even get into bootloader...
Did evrything the same as I have done 10x before, I am guessing it could be a dodgy file we flashed?
Have you tried flashing an older version of CWM ?
I am going to try now..
Click to expand...
Click to collapse
my problem is im using a Mac, JOdin 3 casual is slightly different and im not having any luck...its going toend in two ways...source a pc tomorrow and try and fix it or ill end up with a lovely door stop lol
Did you get to read my thread? Same issue?
apanayis said:
my problem is im using a Mac, JOdin 3 casual is slightly different and im not having any luck...its going toend in two ways...source a pc tomorrow and try and fix it or ill end up with a lovely door stop lol
Did you get to read my thread? Same issue?
Click to expand...
Click to collapse
I am using a PC and have the same issue.
No idea what is going on, very frustrating !!!!
Sent from my GT-I9300 using xda app-developers app
kentykentkent said:
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
yep i get the same thing, any chance you can take a pic of the screen in download mode too?
also if you have charging does your battery indicator just show empty with no animation?
apanayis said:
yep i get the same thing, any chance you can take a pic of the screen in download mode to?
Click to expand...
Click to collapse
Sure.
Sent from my GT-I9300 using xda app-developers app
kentykentkent said:
Sure.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
OK, mine is exactly the same apart from the RP SWREV, mines showing S2, T2, R2, A2, P2
WTF this is i have no idea...
apanayis said:
OK, mine is exactly the same apart from the RP SWREV, mines showing S2, T2, R2, A2, P2
WTF this is i have no idea...
Click to expand...
Click to collapse
No idea what that means, we will wait for smarter ppl to help us lol.
kentykentkent said:
No idea what that means, we will wait for smarter ppl to help us lol.
Click to expand...
Click to collapse
LMAo i agree, besides its 4:25am here in Dubai, if i hear anything ill hit you up
apanayis said:
LMAo i agree, besides its 4:25am here in Dubai, if i hear anything ill hit you up
Click to expand...
Click to collapse
As will I.
Were you just trying to upgrade your CWM so you could run 4.4 kk ROM's
Or were you going from Stock to root?
kentykentkent said:
As will I.
Were you just trying to upgrade your CWM so you could run 4.4 kk ROM's
Or were you going from Stock to root?
Click to expand...
Click to collapse
Trying to upgrade CWM...
You need to flash KK with ODIN then let it boot.
You need to either root it using CF-Autoroot or CWM will. Both of these need to support KK.
Latest CF-Autoroot can be found here - http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
And the latest CWM here - http://forum.xda-developers.com/showthread.php?t=2454079
I don't know how it will play with a Mac though...
ultramag69 said:
You need to flash KK with ODIN then let it boot.
You need to either root it using CF-Autoroot or CWM will. Both of these need to support KK.
Latest CF-Autoroot can be found here - http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
And the latest CWM here - http://forum.xda-developers.com/showthread.php?t=2454079
I don't know how it will play with a Mac though...
Click to expand...
Click to collapse
Hey mate
Thanks for your reply.
I was already rooted and running JB 4.3
When you say I need to flash KK with ODIN, is that KK ROM or a KK supported CWM ?
Seriously confused here...
And I already tried downloading the latest CWM which is what got me into this mess in the first place
kentykentkent said:
Hey mate
Thanks for your reply.
I was already rooted and running JB 4.3
When you say I need to flash KK with ODIN, is that KK ROM or a KK supported CWM ?
Seriously confused here...
And I already tried downloading the latest CWM which is what got me into this mess in the first place
Click to expand...
Click to collapse
Grab the correct CWM for JB 4.3 and flash it, it'll fix you presuming you are running JB -- If not re-flash KK and run the latest CWM - then If if bootloops, take battery out place back in and boot into recovery, wipe cache and boot up into Android
radicalisto said:
Grab the correct CWM for JB 4.3 and flash it, it'll fix you presuming you are running JB -- If not re-flash KK and run the latest CWM - then If if bootloops, take battery out place back in and boot into recovery, wipe cache and boot up into Android
Click to expand...
Click to collapse
apanayis said:
Trying to upgrade CWM...
Click to expand...
Click to collapse
ultramag69 said:
You need to flash KK with ODIN then let it boot.
You need to either root it using CF-Autoroot or CWM will. Both of these need to support KK.
Latest CF-Autoroot can be found here - http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
And the latest CWM here - http://forum.xda-developers.com/showthread.php?t=2454079
I don't know how it will play with a Mac though...
Click to expand...
Click to collapse
Thanks again for everybody's help. What I did was just flashed the old CWM I was using prior to this new one.
Flashed it via ODIN as usual and it booted perfectly.
Still doesn't help me to upgrade my ROM to 4.4 kk LOL...
Just glad my phone is working again, thanks.