Hey i've soft bricked my n7000..
basically i just need to know what exactly to do now, kernels etc
ideally id like to be running Midnote 3.3
anyone kind enough to reply with help would be seriously appreciated!
Maybe if you gave some more information on what how when and why ?
Nobody can help you on a 'hey i lost my car can someone tell me where on this planet i parked this morning?'
Agree on above poster. We need to know what rom uou were flashing from, by what method, and the issue now.
Sent from my GT-N7000 using xda premium
Fair enough was thinking there was a straight forward fix, as in just flash this and do this etc..
i was running Midnote 2.1, i was on LP1 and tried to flash Midnote 3.3 using CWM.. it wasn't flashing as i couldn't see the .zip rom at all..
i then done a few factory wipes and basically just wiped the davlik and cache and tried any options in CWM
The issue now is that when i boot im stuck at the samsung splash screen..
I can boot into recovery and into cwm..
And what exactly happends now ?
dead black screen ?
Samsung logo blocked ?
PC odin doesn't connect ?
Can you enter CWM recovery ?
Can you enter boot recovery ?
I think you better try and flash a safe GB kernel and rom first
Then do a full wipe, then flash whatever you like.
You can best flash through PC odin for the stock GB
friedje said:
And what exactly happends now ?
dead black screen ?
Samsung logo blocked ?
PC odin doesn't connect ?
Can you enter CWM recovery ?
Can you enter boot recovery ?
Click to expand...
Click to collapse
Stuck at Samsung logo
Can enter CWM and recovery, odin works as far as i can tell
I would suggest trying to flash a stock gb rom via pc odin. If you get stuck at the factory.fs stage you may well be superbricked because of the cwm recoveries and wipes on lpy.
There are a few threads on sorting out a problematic emmc section. But we'll get to that afyer youve tried this.
Sent from my GT-N7000 using xda premium
friedje said:
And what exactly happends now ?
dead black screen ?
Samsung logo blocked ?
PC odin doesn't connect ?
Can you enter CWM recovery ?
Can you enter boot recovery ?
I think you better try and flash a safe GB kernel and rom first
Then do a full wipe, then flash whatever you like.
You can best flash through PC odin for the stock GB
Click to expand...
Click to collapse
Thank you, I don't mean to be an effort but you hardly know where I can get a safe GB kernel and rom? i just want to be sure as im getting kind of worried now
Check out dr ketans thread in the stickies of d3velopment section. Theres loaf of info there. Its pretty straight forward if you flash initially to an older rom for your region. Take a look itll make sense promise.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
Check out dr ketans thread in the stickies of d3velopment section. Theres loaf of info there. Its pretty straight forward if you flash initially to an older rom for your region. Take a look itll make sense promise.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks bro, one thing though... i bought this n7000 fully unlocked but i think it was from Poland or somewhere does it matter if i flash a uk gb rom? stupid question i know but want to be sure.. thanks
liam.ire said:
Thanks bro, one thing though... i bought this n7000 fully unlocked but i think it was from Poland or somewhere does it matter if i flash a uk gb rom? stupid question i know but want to be sure.. thanks
Click to expand...
Click to collapse
Doesn't really matter, go ahead and choose what you like.
Lads i seriously appreciate this.. if i get my note back up n running i'll be delighted!
so if when i flash this stock gb rom using Odin i don't need a kernel at all right?
again these must be frustrating questions but your really helping me out here
liam.ire said:
Lads i seriously appreciate this.. if i get my note back up n running i'll be delighted!
so if when i flash this stock gb rom using Odin i don't need a kernel at all right?
again these must be frustrating questions but your really helping me out here
Click to expand...
Click to collapse
No, you just place the .tar file in Odin in the PDA section.
liam.ire said:
Lads i seriously appreciate this.. if i get my note back up n running i'll be delighted!
so if when i flash this stock gb rom using Odin i don't need a kernel at all right?
again these must be frustrating questions but your really helping me out here
Click to expand...
Click to collapse
nope you dont need a kernel when flashing stock GB rom
but 1st keep ur fingers crossed and pray that you get through the ODIN installation method
copy the GB rom file in ODIN folder and open ODIN and click on PDA and select the downloaded GB ROM file and press START
You legends! the stock gb rom worked perfect...
now comes the slightly trickier part.. loading the Midnote 3.3 rom
anyone using this rom? 2.1 was great!
whats the safest way to flash this, kernel wise etc?
thanks again lads
also, now that im back on the stock gb rom.. do i need to root again????
i tried getting into cwm and it brought me into android recovery mode ( still had install zip from sd option)
liam.ire said:
also, now that im back on the stock gb rom.. do i need to root again????
i tried getting into cwm and it brought me into android recovery mode ( still had install zip from sd option)
Click to expand...
Click to collapse
Yes, you will need to root it if you didn't flash a GB pre-rooted ROM.
And I think the CWM.zip file is on drketan's thread.
Guys im running midnote rom fine BUT it keeps vibrating every 5-8 seconds........................
EXTREMELY FRUSTRATING.. any ideas!???
Related
hi there guys...
i've got the new sgs2, what i want to know is, can a rom be installed when its on the memory card... i didnt read about it... or do i always have too use odin ?
Stock rom's through Odin and custom rom's through cwm on flash memory
Sent from my GT-I9100 using XDA Premium App
ah, so its like on acer, can but the custom rom on the root of the memory card and select it trought cwm recovery...?
thanks...
Check your rom version first before flash new custom rom or root our device
type *#1234# and press call
i want to root the phone...
so if i rooted it...i easily can put the custom rom on the device storage and enter recovery mode and flash it ?
disc2 said:
i want to root the phone...
so if i rooted it...i easily can put the custom rom on the device storage and enter recovery mode and flash it ?
Click to expand...
Click to collapse
YES if you follow the instructions to root with CWM in the dev section Chainfires post and follow instructions for custom rom .
jje
bevore i begin, i saw 2 different rooting procedure..
one is with XWKDD_insecure.tar
the other one with CF-Root-SGS2_XW_XEU_KE7-v4.0-CWM4
whats the different... ? the major thing why i wat to root is that i dun want all those **** apps on my phone and the samsung UI
disc2 said:
bevore i begin, i saw 2 different rooting procedure..
one is with XWKDD_insecure.tar
Does that not say no longer used .
the other one with CF-Root-SGS2_XW_XEU_KE7-v4.0-CWM4
latest method in in use later upgrades to later firmware versions KF3 KG 2 etc with later CWM .
jje
Click to expand...
Click to collapse
Hmmm...
My kernel version is
2.6.35.7-I9100xwke7-cl215725..
Which one do u prefer??
Thanks a lot for ur help.. acer was more easier to rooot..
Sent from my Liquid using XDA App
Ke7 ..
jje
cool... any good rom u suggest..?
Villain rom or Cognition rom for starters .
http://forum.xda-developers.com/showthread.php?t=1124396
http://forum.xda-developers.com/showthread.php?t=1081368
jje
Cooll.. thx a lot, will Try it.. hope miui is coming soo ... :-D
Have a nice weekend, thanx for ur help..
Sent from my Liquid using XDA App
It works great but i dont see the cwm app in my phone. I installed the cwm.zio after flashing the new rom but when i go to recovery now with power-home-volume up' it goes to Andtoid recovery instesd og cwm recovery. When i install cwm.zip from android recovery, it goes to cwm recovery and everythungs fine, but after a reboot its back to the same thing. No cwm recovery.
Can someone post a link tp cwm apk ?
And also how to get perm cwm recovery
Other then that the rom is rooted and supersu installed
Ps: also.. is there a working 15toggle for lpf?? i tried one for lpy and it had trouble mountig usb storagr!
Download the CF kernel for LPF here: http://forum.xda-developers.com/showthread.php?t=1331784
EXtract the zip file to get zimage and use mobile odin to flash it under kernel
You must be using the temporary CWM version. Go get cf-lpf kernel from development subforum.
As for your usb storage issues, use mtp.
Sent from my GT-P1010 using XDA
mobile88 said:
Download the CF kernel for LPF here: http://forum.xda-developers.com/showthread.php?t=1331784
EXtract the zip file to get zimage and use mobile odin to flash it under kernel
Click to expand...
Click to collapse
i got the zimage for lpf & installed it. now my wifi wont conenct and the phones freezes all the time
toofank said:
i got the zimage for lpf & installed it. now my wifi wont conenct and the phones freezes all the time
Click to expand...
Click to collapse
I also faced the some problem....
So i started all over again....start from here
http://forum.xda-developers.com/showpost.php?p=26212001&postcount=2203
scoobi159 said:
I also faced the some problem....
So i started all over again....start from here
http://forum.xda-developers.com/showpost.php?p=26212001&postcount=2203
Click to expand...
Click to collapse
yeah.. thats what I am doing now damn it!
thanks
mobile88 said:
Download the CF kernel for LPF here: http://forum.xda-developers.com/showthread.php?t=1331784
EXtract the zip file to get zimage and use mobile odin to flash it under kernel
Click to expand...
Click to collapse
I gotta stop getting help from noobz :b
dude.. the cf kernel and LPF are apparently a big mess.. hehe..
I found out the hard way ...so in case someone asks u next time, just tellem, theyre working on the issue... but right now..there is no fix
Cf kernel with ics very dangerous dont do it bad combination. Dont wipe in that situation.
Sent from my GT-N7000 using XDA
jonpaslim said:
Cf kernel with ics very dangerous dont do it bad combination. Dont wipe in that situation.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
So many people still didnt realize that danger in this bug. I dont understand.
Lots of time, it will seem okay to the majority because most users won't do a wipe unless necessary. Time will tell.
Untill there is safe kernel for ics be safe guys. Now because of the release source code samsung give we will not wait for to long before we see the light at the end the tunnel.
After so many bricks and so many warning from developers, there are still individual dare to run wipe in CWM??
Simply amazing...
Hey everyone.
I tried updating my CWM via odin, I did everything as normal.
However when the phone boots back up, It says ( in the top left hand corner )
RECOVERY BOOTING
set warranty bit : recovery
When I put it back into download mode and back into odin, it came up with the green 'pass'
I have tried taking out the battery, and then entering into bootloader, but the phone just resets and comes back up with the same message. There is no way for me to get into bootloader
I need help please guys
kentykentkent said:
Hey everyone.
I tried updating my CWM via odin, I did everything as normal.
However when the phone boots back up, It says ( in the top left hand corner )
RECOVERY BOOTING
set warranty bit : recovery
When I put it back into download mode and back into odin, it came up with the green 'pass'
I need help please guys
Click to expand...
Click to collapse
It's normal. The Knox bootloader only like its modules stock.
Whit a Customer Recovery we have : set warranty bit: recovery
Whit a new modem we have : set warranty bit: modem
Whit a new kernel we have : set warranty bit : kernel but in this case we can have at boot "Secure Fail: Kernel" in red and not reboot. May be.
This arrived to me on another device w/ Knox bootloader also.
SO what do I do mate?
ValenteL said:
It's normal. The Knox bootloader only like its modules stock.
Whit a Customer Recovery we have : set warranty bit: recovery
Whit a new modem we have : set warranty bit: modem
Whit a new kernel we have : set warranty bit : kernel but in this case we can have at boot "Secure Fail: Kernel" in red and not reboot. May be.
This arrived to me on another device w/ Knox bootloader also.
Click to expand...
Click to collapse
Hey mate.
Ok, so what do I do now?
Just wait for it to boot?
kentykentkent said:
Hey mate.
Ok, so what do I do now?
Just wait for it to boot?
Click to expand...
Click to collapse
having the same issue and using a fooking mac aint helping...:silly:
check out my thread pc user using mac, maybe either one of us will get a response/fix and can help each other
apanayis said:
having the same issue and using a fooking mac aint helping...:silly:
check out my thread pc user using mac, maybe either one of us will get a response/fix and can help each other
Click to expand...
Click to collapse
Ah I hate when people aren't online and can't help.
I can get into download mode, but I can't even get into bootloader...
Did evrything the same as I have done 10x before, I am guessing it could be a dodgy file we flashed?
Have you tried flashing an older version of CWM ?
I am going to try now..
kentykentkent said:
Ah I hate when people aren't online and can't help.
I can get into download mode, but I can't even get into bootloader...
Did evrything the same as I have done 10x before, I am guessing it could be a dodgy file we flashed?
Have you tried flashing an older version of CWM ?
I am going to try now..
Click to expand...
Click to collapse
my problem is im using a Mac, JOdin 3 casual is slightly different and im not having any luck...its going toend in two ways...source a pc tomorrow and try and fix it or ill end up with a lovely door stop lol
Did you get to read my thread? Same issue?
apanayis said:
my problem is im using a Mac, JOdin 3 casual is slightly different and im not having any luck...its going toend in two ways...source a pc tomorrow and try and fix it or ill end up with a lovely door stop lol
Did you get to read my thread? Same issue?
Click to expand...
Click to collapse
I am using a PC and have the same issue.
No idea what is going on, very frustrating !!!!
Sent from my GT-I9300 using xda app-developers app
kentykentkent said:
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
yep i get the same thing, any chance you can take a pic of the screen in download mode too?
also if you have charging does your battery indicator just show empty with no animation?
apanayis said:
yep i get the same thing, any chance you can take a pic of the screen in download mode to?
Click to expand...
Click to collapse
Sure.
Sent from my GT-I9300 using xda app-developers app
kentykentkent said:
Sure.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
OK, mine is exactly the same apart from the RP SWREV, mines showing S2, T2, R2, A2, P2
WTF this is i have no idea...
apanayis said:
OK, mine is exactly the same apart from the RP SWREV, mines showing S2, T2, R2, A2, P2
WTF this is i have no idea...
Click to expand...
Click to collapse
No idea what that means, we will wait for smarter ppl to help us lol.
kentykentkent said:
No idea what that means, we will wait for smarter ppl to help us lol.
Click to expand...
Click to collapse
LMAo i agree, besides its 4:25am here in Dubai, if i hear anything ill hit you up
apanayis said:
LMAo i agree, besides its 4:25am here in Dubai, if i hear anything ill hit you up
Click to expand...
Click to collapse
As will I.
Were you just trying to upgrade your CWM so you could run 4.4 kk ROM's
Or were you going from Stock to root?
kentykentkent said:
As will I.
Were you just trying to upgrade your CWM so you could run 4.4 kk ROM's
Or were you going from Stock to root?
Click to expand...
Click to collapse
Trying to upgrade CWM...
You need to flash KK with ODIN then let it boot.
You need to either root it using CF-Autoroot or CWM will. Both of these need to support KK.
Latest CF-Autoroot can be found here - http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
And the latest CWM here - http://forum.xda-developers.com/showthread.php?t=2454079
I don't know how it will play with a Mac though...
ultramag69 said:
You need to flash KK with ODIN then let it boot.
You need to either root it using CF-Autoroot or CWM will. Both of these need to support KK.
Latest CF-Autoroot can be found here - http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
And the latest CWM here - http://forum.xda-developers.com/showthread.php?t=2454079
I don't know how it will play with a Mac though...
Click to expand...
Click to collapse
Hey mate
Thanks for your reply.
I was already rooted and running JB 4.3
When you say I need to flash KK with ODIN, is that KK ROM or a KK supported CWM ?
Seriously confused here...
And I already tried downloading the latest CWM which is what got me into this mess in the first place
kentykentkent said:
Hey mate
Thanks for your reply.
I was already rooted and running JB 4.3
When you say I need to flash KK with ODIN, is that KK ROM or a KK supported CWM ?
Seriously confused here...
And I already tried downloading the latest CWM which is what got me into this mess in the first place
Click to expand...
Click to collapse
Grab the correct CWM for JB 4.3 and flash it, it'll fix you presuming you are running JB -- If not re-flash KK and run the latest CWM - then If if bootloops, take battery out place back in and boot into recovery, wipe cache and boot up into Android
radicalisto said:
Grab the correct CWM for JB 4.3 and flash it, it'll fix you presuming you are running JB -- If not re-flash KK and run the latest CWM - then If if bootloops, take battery out place back in and boot into recovery, wipe cache and boot up into Android
Click to expand...
Click to collapse
apanayis said:
Trying to upgrade CWM...
Click to expand...
Click to collapse
ultramag69 said:
You need to flash KK with ODIN then let it boot.
You need to either root it using CF-Autoroot or CWM will. Both of these need to support KK.
Latest CF-Autoroot can be found here - http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
And the latest CWM here - http://forum.xda-developers.com/showthread.php?t=2454079
I don't know how it will play with a Mac though...
Click to expand...
Click to collapse
Thanks again for everybody's help. What I did was just flashed the old CWM I was using prior to this new one.
Flashed it via ODIN as usual and it booted perfectly.
Still doesn't help me to upgrade my ROM to 4.4 kk LOL...
Just glad my phone is working again, thanks.
Hello,
i downloaded the Hassan ROM from here:
http://forum.xda-developers.com/showthread.php?t=2662583
And after installing it from the CWM (the required version) i booted the device
and it is stuck on the SAMSUNG logo and wont boot up.
What can i do to fix that i really want this rom.
for now ill flash a stock rom via odin untill ill come up with a solution for that issue.
thanks for the help!
never mind i fixed it!
wow 79 views and no single answer \=
strange...
anyway i flashed a stock rom and then flashed the CWM again and installed the rom again and it worked.
(i dont know why but flashing the stock rom made it possible to install the Hassan rom, i tried to install the Hassan rom 3 times before flashing the stock)
_Fender_ said:
never mind i fixed it!
wow 79 views and no single answer \=
strange...
anyway i flashed a stock rom and then flashed the CWM again and installed the rom again and it worked.
(i dont know why but flashing the stock rom made it possible to install the Hassan rom, i tried to install the Hassan rom 3 times before flashing the stock)
Click to expand...
Click to collapse
I was in wrong thread.
Joku1981 said:
1. You dont post any details about what u were doing.
2. The people answer if they want, you cant force them.
3. If you expected faster answer... why u dont post ur problems in their correct thread if you are so interested for this ROM?
Click to expand...
Click to collapse
1. "i downloaded the Hassan ROM from here:
http://forum.xda-developers.com/show....php?t=2662583
And after installing it from the CWM (the required version) i booted the device
and it is stuck on the SAMSUNG logo and wont boot up.
What can i do to fix that i really want this rom.
for now ill flash a stock rom via odin untill ill come up with a solution for that issue.
thanks for the help!"
2. Ok but the forum is made to help people.
3.im a new user in xda forum i cant post in a developer thread. Great rule btw! realy great.
I seriously f***** up for the first time while trying to flash a custom rom on my cousin's Note 3 SM-N900. I was able to install TWRP and i proceeded to flash a custom rom directly from within TWRP. I kind of got ahead of myself and proceeded to delete/wipe/erase just about everything on the phone before flashing (dalvik, wipe data, cache etc..) and then i proceeded to Install the custom rom directly within TWRP.
Yes i agree i was careless and ****ed up quite a bit but i was so sure it would not go wrong. But it did. Now the phone only loads the initial 'Samsung SM-N900' boot screen and then goes to black. I can still access TWRP and Download modes at will but i am unable to flash a rom or a stock firmware that will work on the phone. I dont know if i ****ed up the bootloader, modem, kernel, etc, but i reckon i did some pretty good damage.
But the fact i can still access TWRP and Download modes gives me hope that i get right my wrongs with your guidance! Please guys help a poor soul out!
So what did you flash or is it a secret rom ?
Sent from my SM-N930F using XDA-Developers mobile app
I first flashed a ROM called Dilshad ROM v8, then when it did not work, i flashed AURORA rom, then Cyanogenmode 13 for note 3 N900 and finally i tried flashing a random stock firmware i downloaded from sammobile page for N900.
JJEgan said:
So what did you flash or is it a secret rom ?
Sent from my SM-N930F using XDA-Developers mobile app
Click to expand...
Click to collapse
Did you use the correct TWRP version ?
Sent from my SM-N930F using XDA-Developers mobile app
Yup i have. TWRP 3.0.2-0 installed correctly on the SM-N900. I can access it even when the screen goes black after the first boot screen by pressing the combination buttons (power + volume up + home)
JJEgan said:
Did you use the correct TWRP version ?
Sent from my SM-N930F using XDA-Developers mobile app
Click to expand...
Click to collapse
Heya i know that i'm late but have you tried flashing official samsung firmware via ODIN?
Zeiad98 said:
Heya i know that i'm late but have you tried flashing official samsung firmware via ODIN?
Click to expand...
Click to collapse
And next time bother to read what is being discussed, so you don't post useless posts. He said he did.
Dejan Sathanas said:
And next time bother to read what is being discussed, so you don't post useless posts. He said he did.
Click to expand...
Click to collapse
I HAVE READ THE POST + REPLIES!! Though , he said he flashed a random samsung software.. But how should i know if he did it with the tar.md5 or flashed it as a regular zip... I'm just a guy tryin to help, so any extra addition may help so don't just regard that as useless
Since term flashing is mostly used with recovery mode, so did he put it on download mode and BL the offical bootloader and PA/PDA the software that supports the same bootloader?
am unable to flash a rom or a stock firmware
stock firmware i downloaded from sammobile page for N900.
JJEgan said:
am unable to flash a rom or a stock firmware
stock firmware i downloaded from sammobile page for N900.
Click to expand...
Click to collapse
An idea that is maybe a bit risky is to put back the normal (stock) recovery and try to restore update from sd card or something like that... I'm not sure how safe it is so use it as a least resort... I didn't even hear anything like that its just an idea, it may not work... But hope it helps
Hi
I have a similar problem. I have a note 3 with original UK ROM and wanted to flash my operator ROM to get wifi calling. Both are android 5.0
The problem is after trying to flash the first time I had a problem that the new ROM would not fully flash. reading posts I understood I had to flash PIT file which I downloaded and flashed. After flashing PIT the new ROM did not go in so I flashed my original UK.
After reboot I kept getting security warnings that something has changed and I should reboot. After several boots the problem did not go away.
So I tried to flash ROM again, different tries between UK ROM and my operator ROM, but the phone now only loops at booting. Sometimes it gets stuck at first Samsung screen.
Can anyone please help?
Thank you
I understood I had to flash PIT file NO NO NO .
You don't flash a PIT file without good reason .
SM900 is EXYNOS not Qualcomm model .
So what phone model do you actually have as this threads question is N900 .
Ok sorry I have 9005.