hi guys! A friend brought me his droid X who wanted to change the rom, but now when you turn the phone gets stuck on the logo of Motorola, we could do to return it to life.
Sorry for my bad English
Hi, please someone help me, I try to enter recovery but remains in the picture show, could be put back the recovery through ADB or something similar.
Try to sbf.
That is a picture of stock recovery press Vol +/- at that screen to get into it... And if you're hanging at the red m you probably should sbf
Sent from my ADR6425LVW using Tapatalk 2
Related
Phone was rooted with .596 (2.3) and working perfectly for weeks. Gave to my daughter who lets the battery run out completely yesterday.
Now:
Trying to go into recovery = android dude with triangle exclamation point
Trying to boot normally = motorola sign, droid sign, animation starts, phone vibrates once like normal, notification lights once like normal, animation slows down, screen goes black, phone completely unresponsive, have to pull battery to retry
Trying to plug it into computer = screen turns on showing "no service", is in airplane mode, can't use touchscreen to unlock, screen goes black, can't get it to come back on....Can access the SD card
Any ideas how to fix this?
Looks like you need to sbf
DROID X running liberty GB V.8
yup sbf...
Sent from my DROIDX using the XDA mobile application powered by Tapatalk
got into bootloader was 30.04 so I used the 2.3.34 system only .sbf file. everything said it worked ok, got to where RSDlite said to manually power up phone. Stuck at Red motorola Circle. Tried to go into recovery, get to the android and ! again. Try to hit search key so I can do a wipe as is suggested in these circumstances and nothing happens...just sits there...Multiple attempts at both still stock on Motorola or android/!
ideas now?? thanks for the help btw
EDIT: Got it, Did SBF with full version instead of the system only and that made recovery work, did the wipe/reset and all is working again
thanks all
Nice, was about to say a full sbf is what you need
DROID X running liberty GB V.8
I apologize in advance for my English. I have a problem with my Motorola Milestone 2. After installing CM7 something went wrong. When I start the phone, it shows up for a few seconds the red motorola logo and disappears (there is a black screen). I can not go into recovery. I can't charge battery. Can anyone help me?
kruckers said:
I apologize in advance for my English. I have a problem with my Motorola Milestone 2. After installing CM7 something went wrong. When I start the phone, it shows up for a few seconds the red motorola logo and disappears (there is a black screen). I can not go into recovery. I can't charge battery. Can anyone help me?
Click to expand...
Click to collapse
If you see the red moto logo, you are on the new gb kernel.
To install cm7 Froyo Kernel based, you need to do a downgrade method. Read this:
http://forum.xda-developers.com/showthread.php?t=1497263
I have a problem with my Defy MB525, This morning I woke up and found the cell with the Android Logo with Exclamation, it was really hot so I turn off pulling the battery.
Then I tried to power ON but still stuck on Motorola's logo, in trying to enter the recovery (Pressing vol+ and Power but nothing, same pressing vol-).
the strangest of all is that my Defy don't display the white led, so it's not charging?
As far as I was to the symbol of android with red exclamation, I tried pressing the volume buttons but none served.
I was looking in other threads but nothing helps me, can you help me please? thanks. :crying:
If you can't enter recovery, you must flash a sbf. Check the many guides for instructions
Sent from my MB526 using Tapatalk 4
thekguy said:
If you can't enter recovery, you must flash a sbf. Check the many guides for instructions
Sent from my MB526 using Tapatalk 4
Click to expand...
Click to collapse
Hi thekguy.
I'm about to buy a Defy that is stuck in the M logo.
The guy who is selling it doesn't give much information.
It says that's stuck on that logo and that the computer doesn't recognize it.
In your opinion, should i buy it?
Do i have a chance of bring it back yo life??
But I have a problem, RSD don't recognize my phone, so, maybe it's the battery, isn't?
rc_nico said:
Hi thekguy.
I'm about to buy a Defy that is stuck in the M logo.
The guy who is selling it doesn't give much information.
It says that's stuck on that logo and that the computer doesn't recognize it.
In your opinion, should i buy it?
Do i have a chance of bring it back yo life??
Click to expand...
Click to collapse
If the port is confirmed to not be damaged, then you should be able to flash dfp231 and resurrect it, unless eMMC has failed, which should not be the case
RSD doesn't recognise the phone if: port is damaged, eMMC wiped, bad cable or computer
Sent from my MB526 using Tapatalk 4
thekguy said:
If the port is confirmed to not be damaged, then you should be able to flash dfp231 and resurrect it, unless eMMC has failed, which should not be the case
RSD doesn't recognise the phone if: port is damaged, eMMC wiped, bad cable or computer
Sent from my MB526 using Tapatalk 4
Click to expand...
Click to collapse
I just got a new answer by the seller, he says thats shows "Ok battery" and something else after i told him to check what happens when he powered on the phone holding the VOL + key.
That's a green light for me.
The bid is ending in 7h, hope i can win it!
Thanks thekguy.
Hello guys! This is my first post so please don't hate me.
I have an old Defy which I need to use because my current smartphone is broken. But I have some problems:
My Defy is a MB525 but months ago I've flashed an MB526 (Defy +) SBF and since then my Defy became a Defy+. The problem is: It's stucked on bootloop (M of death) and I CAN'T GET TO STOCK RECOVERY.
I try everything:
- Flashed all Defy MB525 SBFs = white led (of death) and screen off
- Flashed a lot of Defy + SBFs = only one "worked". It's the DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF this rom is the only one who makes my phone boot.. into a bootloop without stock recovery.
I don't have problems to recognize the phone on RSD Lite, my drivers are up to date and my battery is 100% (universal charger for hours). I try to revive this phone almost everyday. I'm using a Defy MB525 (used to be a Claro Brazil rom) with a MB526 rom and BL 7. I remember that one day I was able to flash a chinese rom and the system used to boot, but I couldn't get more than five minutes of use, the system crashed and rebooted. Don't know if this is important but anyway.
I just need to get to the stock recovery. I'm beggin you guys to help me because I really don't know what else to do.
Thanks very much for your understanding I'll be very glad if someone help me out.
Best regards.
PS: I really need your help DEVs, I'm not a noob but this is beyond my comprehension :crying:
Have you tried going to stock recovery after flashing DFP-231? It's not possible that the stock recovery is missing. Switch off the Defy, hold the power and volume down buttons simultaneously till a triangle with a ! mark appears. Then press both volume up and volume down simultaneously to get stock recovery. Then wipe data and cache and try again. If it still doesn't work, it looks like a hardware problem.
hotdog125 said:
Have you tried going to stock recovery after flashing DFP-231? It's not possible that the stock recovery is missing. Switch off the Defy, hold the power and volume down buttons simultaneously till a triangle with a ! mark appears. Then press both volume up and volume down simultaneously to get stock recovery. Then wipe data and cache and try again. If it still doesn't work, it looks like a hardware problem.
Click to expand...
Click to collapse
0. read beginners guide
1. charge battery (ext. charger)
2. factory reset from stock recovery if possible
2a. if not flash dfp-231.sbf (may end in bootloop)
2b. wipe data in stock recovery (should work now)
3. reboot
now you can root , install recovery
Sent from my MB525 red , froyo 2.2.2 german blurless service.sbf, as stock rom
Same thing, but more descriptive.?
Sent from my Nexus 7 using Tapatalk
Guys I REALLY cannot go to the stock. Seriously I don't know why. I know how it works and it really seems like missing! I'm doing everything right!! It's a dead end :crying::crying::crying::crying:
Is there any way to flash only the recovery apart from a full SBF? I read about ADB also. If I could make ADB see my device when it's in bootload I could try some commands, right? But I think ADB just works when the phone is alread booted.
Thanks again for your help DEVs!
sorry for double post
Hey guys I figurated something! My defy only boots (into the bootloop) to this four Defy + SBFs. They are all BL 7 I think.
4.5.1-134_DFP-188
4.5.1-134_DFP-231
4.5.1-134_DFP-2311
4.5.1-134_DFP-2312
Any other SBF (MB525 or MB526) get me to the black screen and white led.
Don't know if this helps but anyway.. Still not able to go to the recovery.
Those SBFs are BL7s. Anyways, if you're not able to enter stock recovery then most probably you're doing something wrong. Watch some videos on YouTube on how to enter stock recovery. It is simply impossible for the stock recovery to be "missing". I may be able to help you on hangouts though.
Sent from my Nexus 7 using Tapatalk
bro,
have you faced any defects in volume controll previously.
It may be due to faulty volume switch, which essentialy need to enter recovery.
Sent from my MB526 using Tapatalk 2
hotdog125 said:
Those SBFs are BL7s. Anyways, if you're not able to enter stock recovery then most probably you're doing something wrong. Watch some videos on YouTube on how to enter stock recovery. It is simply impossible for the stock recovery to be "missing". I may be able to help you on hangouts though.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Hotdog I really appreciate your concern but I'm doing it right, seriously. I know that when you boot to the recovery a green android with an exclamation point appears, and then you press vol up + vol down BUT I CAN'T GET THERE. THERE IS NO ROBOT. NO LIVE. NO HOPE :crying:
Sorry I'm a sentimental mood I love this phone so much. I'll try to record the defy boot with my lazy webcam later
pradeeppk said:
bro,
have you faced any defects in volume controll previously.
It may be due to faulty volume switch, which essentialy need to enter recovery.
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
Hey bro! The vol buttons are working because sunday I flashed a "fixed sbf" based on my DFP-231 SBF and try to go to the stock recovery but instead it lead me to a bootloader failure. It means that the command was sent, but the system was corrupted.
I was thinking about "mixing" a NANDROID with this SBF and flash it via RSD LITE, is it really possible? I was able to mix SBFs before, it changed the M logo but lead me to the same "bootloader error"..
If bootloader is ok.....
Sound's like hardware problem...
Have you error output in RSD during flash process ?
Sent from my MB525 red , froyo 2.2.2 german blurless service.sbf, as stock rom
Lame webcam record
Hey guys!! I made that video showing that I have no recovery. I know, there is no quality in this video because its an old (very old) webcam. Anyway the first time I try to go to recovery and the second I enter on the bootloader to show that the buttons are ok
https://www.youtube.com/watch?v=q-vovcdpQ0s
That URL is for some other video?. Anyway, I found the video in question. It looks as if volume down isn't working, so I guess the fault is with the volume button. Most probably the bootloop will be fixed by a data wipe in stock recovery.
hotdog125 said:
That URL is for some other video?. Anyway, I found the video in question. It looks as if volume down isn't working, so I guess the fault is with the volume button. Most probably the bootloop will be fixed by a data wipe in stock recovery.
Click to expand...
Click to collapse
Sorry I fixed the video right now. The button is working, I make sure of that. **** it, guess this fancy brick with a M letter is all I got.
Anyway thanks for your support guys. I've discovered something in my unbrick mission: I learned that Linux is a great operating system, better then windows, and will probably be my primary OS from now on.
hello guys, my milestone 2 has bricked on bootloader, i tried to pass sbf vivo 2.3.6 original rom from him, but when finished my milestone as reboot on bootloader again, and i remove my baterry and input again and he his turn on again on bootloader without i'm turn on my cellphone.
my milestone has bricked with i am try to put CM 10 but i'm found an article and says my original rom's don't do this.
sorry for bad english, i need a help..
thanks
adding a reply, when i finished to pass cm10 from recovery, i have made a wipe/data and cache, and put to reboot in recovery, after this my cell is bricked . i'm tryed to put dowgrade bl = 3 via sbf, i tried to put the original rom vivo 2.3.6 and nothing works . my cellphone always reboot on bootloader
Try to enter in boot menu, after flash vivo sbf 2.3.6, when turning on you hold x from the keyboard, or @, than you must see a "!" after see it pull volume down, you have to see a option to do a factory reset, do it. Than rebot.
I did it a loot!
Any problem ask again.
Sent from my Xperia SP using XDA Free mobile app
but i cannot do this, because after flash sbf rom vivo, my milestone 2 reboot on bootloader mode again, i remove my batery and insert again and reboot again, if i not touch any bottom to power on. i think no have soluction about this problem :/ thanks for help !!
rapha34 said:
but i cannot do this, because after flash sbf rom vivo, my milestone 2 reboot on bootloader mode again, i remove my batery and insert again and reboot again, if i not touch any bottom to power on. i think no have soluction about this problem :/ thanks for help !!
Click to expand...
Click to collapse
hi, same here, im rebooting whit x pressed, doing everithing on the menu, whipping cache... whipping data... doing reboot.... Still bricked.
Now i'm trying this: http://forum.xda-developers.com/showthread.php?t=1437682