Description:Hi everyone.As a result of long researches,i found those kernels.They have got 2.2 Atmel drivers so If you install those kernels ,you will not have the problem of Atmel
for CM7 - LeWaOs - MooKeOS - Lezo ROM
It can overclock up to 1.8 Ghz,but this kernel doesn't have smartassv2
Link:http://www.mediafire.com/?k2b28rdu01paa65for MIUIv3 ROM
Current ROMs are used;the new unless kernel. It can overclock up to 1.8 Ghz,and this kernel has smartassv2
Link:http://www.mediafire.com/download.php?uah96r1pcoplhj3B5xx - B8xx (Honor Port) ROM
It can overclock up to 1.4 Ghz,and this kernel has smartassv2
Link:http://www.mediafire.com/download.php?zfo74y25s5tox1r
Install
install zips via CWM, like install a ROM.No need to wipe process.
forumber2 said:
Hi everyone.As a result of long researches,i found this kernel.It has got 2.2 Atmel drivers so If you install this kernel ,you will not have the problem of Atmel It can overclock up to 1.8 Ghz.It tested on cm7 and b528.
Link:http://www.mediafire.com/?k2b28rdu01paa65
Install: (very difficult )
Install zip via CWM.
Note:This kernel isn't created by me
Click to expand...
Click to collapse
Almost works with .35 MIUI too. Phone boots & runs ok but automatic screen rotation has to be set off (it mixes horizontal & vertical "layouts" --> the screen is always 90 degrees off). Can't say if it fixes Atmel problems cause I have a Synaptics screen.
sbasil said:
Almost works with .35 MIUI too. Phone boots & runs ok but automatic screen rotation has to be set off (it mixes horizontal & vertical "layouts" --> the screen is always 90 degrees off). Can't say if it fixes Atmel problems cause I have a Synaptics screen.
Click to expand...
Click to collapse
can you fix it sbasil? because i using your rom actually
sbasil said:
Almost works with .35 MIUI too. Phone boots & runs ok but automatic screen rotation has to be set off (it mixes horizontal & vertical "layouts" --> the screen is always 90 degrees off). Can't say if it fixes Atmel problems cause I have a Synaptics screen.
Click to expand...
Click to collapse
Hmm,this bug is only in MIUI.thank you for reporting bug
exxxplorer said:
can you fix it sbasil? because i using your rom actually
Click to expand...
Click to collapse
Nope, sorry, I don't do the kernel stuff. I guess someone could come up with a workaround though.
lets try
is franco can do something ins this kernel will be perfect!
Kernel by itself is no good for development. You need sources. Best idea I have had was to pull the relevant commits and fixes from DZO's 3.08 ICS kernel and Buckingtons ICS .35 kernel and put them into the proper .35 source, but it takes more time than I have to do. Plus, I am not sure we really have any need for a gingerbread kernel now, ICS is where it is at dev wise sad though that is. We have skipped a kernel iteration due to Huawei mucking up the sources and official gingerbread so much.
https://github.com/dzo/kernel_huawei
https://github.com/franciscofranco/kernel_huawei
https://github.com/TomGiordano/kernel_huawei/tree/2.6.35-ics
This one might be a good base:
https://github.com/TomGiordano/kernel_huawei
It is just about pulling the best bits from the kernel trees and testing, testing testing. FJSferreria? had a guide to compiling the 3.08 kernel source from DZO which should work fine for the .35 kernel too.
http://forum.xda-developers.com/showthread.php?t=1577876
Where this kernel could work is in extracting the relevant defconfig from it to build a working .35 kernel from. instead of 'make u8800_defconfig', we would pull the config from the phone, back it up, copy it into the build directory and rename it to '.config' and just run the 'make' command.
Can anyone pull /proc/config.gz and upload it for me?
Cheers
Works perfectly with B526 :thumbup:
Sent from my U8800 using xda premium
spatjoe said:
Works perfectly with B526 :thumbup:
Sent from my U8800 using xda premium
Click to expand...
Click to collapse
can this work with B528 official rom also?
as i do not have CMW, is there a way to extract the boot.img?
so that to put it at /.cust_backup/image/ folder by using root explorer...
hk_aquarius said:
can this work with B528 official rom also?
as i do not have CMW, is there a way to extract the boot.img?
so that to put it at /.cust_backup/image/ folder by using root explorer...
Click to expand...
Click to collapse
Read first post. Boot image is in zip so you can just extract it.
Sent from my GT-P1000 using Tapatalk 2
hk_aquarius said:
can this work with B528 official rom also?
as i do not have CMW, is there a way to extract the boot.img?
so that to put it at /.cust_backup/image/ folder by using root explorer...
Click to expand...
Click to collapse
You must install a CWM to install this package.
forumber2 said:
You must install a CWM to install this package.
Click to expand...
Click to collapse
Not necessarily, he can extract the boot.img that's inside of the package and copy it to the image folder, with root explorer.
Sent from my U8800
fjsferreira said:
Not necessarily, he can extract the boot.img that's inside of the package and copy it to the image folder, with root explorer.
Sent from my U8800
Click to expand...
Click to collapse
yes,he can.I want to say, he must install CWM for install zip package. He can do your method :good:
Does this kernal have the wifi related reboot problem? Where if you leave wifi on and turn of the screen, sometimes it will crash and reboot.
typci said:
Does this kernal have the wifi related reboot problem? Where if you leave wifi on and turn of the screen, sometimes it will crash and reboot.
Click to expand...
Click to collapse
No,i think it hasnt got any reboot problem.I used this on b528, CM7.2, B866, B876, MooKeOS and i have not encountered any problems. Which ROM are you using?
forumber2 said:
No,i think it hasnt got any reboot problem.I used this on b528, CM7.2, B866, B876, MooKeOS and i have not encountered any problems. Which ROM are you using?
Click to expand...
Click to collapse
I'm currently on 2.2, because B526 had reboots related to wifi being on and the screen turning off. I'm looking to go back to 2.3.5, but I need a 100% stable system. I was hoping this kernal might have fixed the wifi/reboot problem. I want to try B528, but I can't root it because the drivers required won't install on Win 7 64bit.
typci said:
I'm currently on 2.2, because B526 had reboots related to wifi being on and the screen turning off. I'm looking to go back to 2.3.5, but I need a 100% stable system. I was hoping this kernal might have fixed the wifi/reboot problem. I want to try B528, but I can't root it because the drivers required won't install on Win 7 64bit.
Click to expand...
Click to collapse
Which guide do you use to root B528? I could root B528 with Win7 64bit. This kernel should work on B526 and other versions.
forumber2 said:
Which guide do you use to root B528? I could root B528 with Win7 64bit. This kernel should work on B526 and other versions.
Click to expand...
Click to collapse
I tried all kinds of guides. I got a folder with all the stuff I tried to root B528 with, it includes: DooMLoRD_v4, rooted boot image, some Chinese rooting tools, and about 4 different set of drivers. Th problem I have is the drivers won't install, I get an error: "Driver not intended for this platform." If I could get the drivers working, then I could root.
Related
Howdy.
I think I may have a Cyanogenmod 6.1 Ver ready, but the updater-script needs some updating (I think).
Based on Neopeeks rom, made with the ROM kitchen.
Download link:
http://dl.dropbox.com/u/31118/cm611-u8800test-wk.zip
Don't have a U8800 myself, need someone to test it.
If some more experienced dev could take a look at it i'd appreciate that.
However it should be ready for flashing.
(I don't have a U8800 myself, so I can't test it.)
Thanks for your work ,thought I can't download due to my network
Sent from my u8800 using XDA App
This is for HTC bravo? I think someone allready tried and it didnt work...
Otherwise, got installation aborted...
sanpsa said:
This is for HTC bravo? I think someone allready tried and it didnt work...
Otherwise, got installation aborted...
Click to expand...
Click to collapse
Yes, using bravo as base, but it shouldn't matter, kernel is from U8800 along with drivers.
it seems that the rom is not match with the u8800.
298800577 said:
it seems that the rom is not match with the u8800.
Click to expand...
Click to collapse
could u share more of ur experience with this rom?
What exactly have you changed with this rom? Why did you choose the Desire rom? First up you need a new /system/build.prop then you need to edit the /META-INF/com/google/android/updater-script.orig file so it flashes stuff to the right locations. Then you need to change the ro.product.device so it matches the build.prop file. Then to top it off the bravo uses the MTD partitioning scheme but the u8800 uses the EMMC partitioning scheme. So to put it simply, the rom will not work without many changes.
Yeah it also seems to have modules built for 2.6.35.9 (including a bcm4329 driver whereas this phone uses a Qualcomm RF chip, I believe WCN1312).
atleast some work is going On
Updated the ROM, should work now- Can anyone test?
Doesnt work...
anyone checked? i ve recovery problem i cant apply this rom right now
The update script needs work
Ihtfp69 tip toes in and closes the door
I realized after releasing a ROM that no one was using Koush's AnyKernel method for flashing kernels. This poses a problem for ROMs with custom ramdisks. Someone mentioned the AnyKernel method did not work on this phone. So I did some investigating. With a few changes to the script, I have it working perfectly.
Credits here, of course, go to Koush. I just modified his script. The kernel zip attached here contains the kernel from the latest leak. Because this uses the AnyKernel method, you can flash this on ANY GB Sense ROM and it will work and not break WiFi.
EDIT: I guess Ziggy did a version as well a few months ago. Here is a link to his: Ziggy's AnyKernel MOD
Download Mine --> Tbolt_AnyKernel.zip
a true asset to this community.
thanks for all your hard work!
cant wait for skyraider zeus v2
Sense ROMs only?
jc
ihtfp69 said:
Ihtfp69 tip toes in and closes the door
I realized after releasing a ROM that no one was using Koush's AnyKernel method for flashing kernels. This poses a problem for ROMs with custom ramdisks. Someone mentioned the AnyKernel method did not work on this phone. So I did some investigating. With a few changes to the script, I have it working perfectly.
Credits here, of course, go to Koush. I just modified his script. The kernel zip attached here contains the kernel from the latest leak. Because this uses the AnyKernel method, you can flash this on ANY GB Sense ROM and it will work and not break WiFi.
Download --> Tbolt_AnyKernel.zip
Click to expand...
Click to collapse
Surprised to see you here? Glad to see your support for the community.
mrchambo said:
Sense ROMs only?
jc
Click to expand...
Click to collapse
Yes, it's the stock kernel from the new leak, which is Sense.
Okay, thank you. That's what I thought...
jc
Applying this gave me bootloops in Gingervitis 1.2.1 GB. Won't go past the splash screen
mrchambo said:
Sense ROMs only?
jc
Click to expand...
Click to collapse
The scripts should work on AOSP and Sense ROMs. The kernel included is Sense only.
JaydenR said:
Applying this gave me bootloops in Gingervitis 1.2.1 GB. Won't go past the splash screen
Click to expand...
Click to collapse
Hmmm ... it shouldn't matter, but I will wake a look and see if I can duplicate it. Make sure the file you downloaded is around 3.4 MB. If not, grab it again.
First download was 2.89 second was 3.4 I believe. Both had the exact same result. Boot loops
Ziggy already did this for the tbolt. Ive been using anykernel for over a month now. It what iuse when i extract the kernel from synergy.
fixxxer2008 said:
Ziggy already did this for the tbolt. Ive been using anykernel for over a month now. It what iuse when i extract the kernel from synergy.
Click to expand...
Click to collapse
Is he sharing? I seem to be misinformed then. Why is everyone else still using boot.img files then?
ihtfp69 said:
Is he sharing? I seem to be misinformed then. Why is everyone else still using boot.img files then?
Click to expand...
Click to collapse
yeah it's under the thunderbolt section at ppcgeeks. been there for awhile now.
http://forum.ppcgeeks.com/htc-thunderbolt-development/143287-anykernel-thunderbolt.html
cool beans. I'll just link to his then.
What is the purpose of this kernel updater?
I'm not sure I understood how Ziggy explained it.
johnnysyeah said:
What is the purpose of this kernel updater?
I'm not sure I understood how Ziggy explained it.
Click to expand...
Click to collapse
lol! Gotta love Ziggy but, he definitely thinks on a higher plane than most! I have trouble following him lots of times as well.
ihtfp69 said:
Ihtfp69 tip toes in and closes the door
I realized after releasing a ROM that no one was using Koush's AnyKernel method for flashing kernels. This poses a problem for ROMs with custom ramdisks. Someone mentioned the AnyKernel method did not work on this phone. So I did some investigating. With a few changes to the script, I have it working perfectly.
Credits here, of course, go to Koush. I just modified his script. The kernel zip attached here contains the kernel from the latest leak. Because this uses the AnyKernel method, you can flash this on ANY GB Sense ROM and it will work and not break WiFi.
EDIT: I guess Ziggy did a version as well a few months ago. Here is a link to his: Ziggy's AnyKernel MOD
Download Mine --> Tbolt_AnyKernel.zip
Click to expand...
Click to collapse
I just tried this, and it broke Wifi on my Tbolt. Any idea what the reason could be? I extracted the Zimage from my target ROM, replaced it in the .Zip, and flashed it. Anything else I should be doing?
onyx_64 said:
I just tried this, and it broke Wifi on my Tbolt. Any idea what the reason could be? I extracted the Zimage from my target ROM, replaced it in the .Zip, and flashed it. Anything else I should be doing?
Click to expand...
Click to collapse
You need to pull the bcm from /system/lib/modules also.
Sent from my SHIFTAO5P using XDA App
DroidTh3ory said:
You need to pull the bcm from /system/lib/modules also.
Sent from my SHIFTAO5P using XDA App
Click to expand...
Click to collapse
oh, yeah, forgot to mention that I copied the 2 files (bcm4329* and sequans*) from the target ROM into /system/lib/modules After I had flashed. Should I have copied it to the .zip first and then flashed it? does it sit anywhere other than /system/lib/modules?
The reason i didnt do it is because I assumed the existing files should work.
onyx_64 said:
oh, yeah, forgot to mention that I copied the 2 files (bcm4329* and sequans*) from the target ROM into /system/lib/modules After I had flashed. Should I have copied it to the .zip first and then flashed it? does it sit anywhere other than /system/lib/modules?
The reason i didnt do it is because I assumed the existing files should work.
Click to expand...
Click to collapse
The bcm spits out at the end of compiling the kernel and it is specific to the kernel. Pull the zimage and the modules from the ROM, put them in the correct folders in the zip ... Wipe Cache and Dalvik for kicks and flash. Should be fine.
Sent from my SHIFTAO5P using XDA App
DroidTh3ory said:
The bcm spits out at the end of compiling the kernel and it is specific to the kernel. Pull the zimage and the modules from the ROM, put them in the correct folders in the zip ... Wipe Cache and Dalvik for kicks and flash. Should be fine.
Sent from my SHIFTAO5P using XDA App
Click to expand...
Click to collapse
Wow man.. you are quick. Let me try that way. Thanks so much!
UPDATE:
That worked like a charm!.. Flashed with the lib/modules after wiping cache n dalvik. Thanks again!
As the title says, thats the only thing holding me back and not upgrade to 2.3.5 official. So can any dev fix this or use froyo drivers for atmel? Cause i dont think huawei is going to fix this.
I'm not a kernel dev, so I can't help. The fix would be to extract touchscreen driver from 2.6.32 kernel and put it in 2.6.35 kernel.
Blefish said:
I'm not a kernel dev, so I can't help. The fix would be to extract touchscreen driver from 2.6.32 kernel and put it in 2.6.35 kernel.
Click to expand...
Click to collapse
sounds to easy..
i would like to know this solution to.
How do you know if you have a atmel screen?
Download elixir 2 apk from market. Start apk, go to information, then input devices. You will find it there.
Sent from my u8800
I'm not happy with the Synaptics driver though... It's "jumpy" when i scroll at a low speed...
So, a kernel dev could fix these issues? That sound awesome New hope ^^
blueberetdb5 said:
I'm not happy with the Synaptics driver though... It's "jumpy" when i scroll at a low speed...
So, a kernel dev could fix these issues? That sound awesome New hope ^^
Click to expand...
Click to collapse
There's a firmware update released at 2011-12-28 for U8800+ Synaptics touchscreen, the offcial staff/moderator said there're no side effect to apply this update on U8800, official thread: http://bbs.huaweidevice.com/cn/forum/index.php?app=forum&mod=Detail&act=index&id=34559 (chinese language, need register to download)
目的：修正U8800+ 触摸屏卡顿问题
适用范围：仅适用U8800+
升级前请仔细阅读《U8800+触摸屏固件升级指导》
升级方法：
1.1 准备一张SD卡，剩余空间至少50M，同时确保手机电池电量剩余50%以上;
1.2 在SD卡根目录下建立一个文件夹，命名为update;
1.3 将synaptics.img复制到update目录下；
1.4 手机关机，将SD卡插入手机SD卡槽；
1.5 同时按住音量上键和电源键不放，直到进入Recovery模式，选择“touchscreen firmware update"
（Recovery模式下音量键可以用来选择，电源键可以用来确认选择）
1.6 升级成功后，重起手机即OK.
升级中可能出现的异常情况：无法找到SD卡或找不到升级文件，检查下SD卡工作状态及目标文件存储位置是否符合要求。
如果升级过程中 出现 E:update failed" 说明您的手机不需要升级该 firmware,选择“reboot system now” 按电源键重新启动手机即可；
Click to expand...
Click to collapse
brief translation:
fixed: 'laggy' issue of U8800+ touchscreen
applied: to U8800+ only
steps:
1. prepared a SD card with at least 50M remaining spaces, make sure battery capacity have 50%+
2. make an "update" directory under the root of SD card
3. copy synaptics.img to that "update" directory
4. power off, and put SD card to phone
5. hold Vol+ and power button to boot into recovery mode, choose "touchscreen firmware update"
6. after update done, reboot
if you got "E:update failed" error message, it means your phone need not update, just choose “reboot system now”
Can you apply this update to both .32 & .35 kernels?
Sorry, I can't confirm it, no official document about this, most people use Android 2.3 to update this, but I saw few people apply on Android 2.2. ( see #58 reply of this feedback thread: http://bbs.huaweidevice.com/cn/forum/index.php?app=forum&mod=detail&act=index&id=34637&p=3 ). My phone does not have 'laggy' issue, I didn't apply this update, I just reply blueberetdb5's question for his Synaptics touchscreen.
So this can't be use for the atmel thouch?
Sent from my Huawei Ideos X5 using XDA App
why this topic got flooded by synaptic messages?
haha it works
Sent from my u8800 using xda premium
It works on what? Atmel touch? What problems you had before?
Sent from my Huawei Ideos X5 using XDA App
alex1301 said:
haha it works
Sent from my u8800 using xda premium
Click to expand...
Click to collapse
what works?
it works on synaptics the update. i had a laggy touchscreen before with actions every 5 pixels
Sent from my u8800 using xda premium
This thread is about the atmel touchscreen guys just read the title.
I try to use this update on the atmel thouch and is said to me error so it has any effect on my phone , still with frezzes and glitches this clip can show what happens in my phone after install a clean 2.3.5 version on a atmel touch. its not my phone but the problems are the same that in this droid on the youtube. http://www.youtube.com/watch?v=TT0CkZVHlXU
Sent from my Huawei Ideos X5 using XDA App
Blefish said:
I'm not a kernel dev, so I can't help. The fix would be to extract touchscreen driver from 2.6.32 kernel and put it in 2.6.35 kernel.
Click to expand...
Click to collapse
Does anyone tried this solution?
Can any dev fix the problem with the atmel touch drivers or at least tell us if its possible to use the froyo drivers which worked fine with atmel.
I am at a loss here. I am running CLK 1.5 PA 1.1a with tytung r3, however, the device gets icon flash similar to icecreamtosti, where the icons do not respond without a reboot.
I wanted to flash Dorimanx v6.9 or v7.2 HWA, and understand I need to place the ROMs initrd.gz file in the initrd-custom folder. I have tried this on Snow Leopard & XP to no avail using a variety of different compression programs including 7-zip. I unzip the kernel and the ROM, put the PA 1.1a initrd.gz in the correct folder and rezip it. Each time though, even after re-downloading the kernel and ROM, I get an error within CWM, which reads that the installation has been aborted. Why is this? Do I need to re-compile the kernel in Android Kitchen? (I do not know how to do this by the way) or what else am I doing incorrectly? I have trawled the XDA HD2 forum, but had no luck. Suggestions?
aldersonalex said:
I am at a loss here. I am running CLK 1.5 PA 1.1a with tytung r3, however, the device gets icon flash similar to icecreamtosti, where the icons do not respond without a reboot.
I wanted to flash Dorimanx v6.9 or v7.2 HWA, and understand I need to place the ROMs initrd.gz file in the initrd-custom folder. I have tried this on Snow Leopard & XP to no avail using a variety of different compression programs including 7-zip. I unzip the kernel and the ROM, put the PA 1.1a initrd.gz in the correct folder and rezip it. Each time though, even after re-downloading the kernel and ROM, I get an error within CWM, which reads that the installation has been aborted. Why is this? Do I need to re-compile the kernel in Android Kitchen? (I do not know how to do this by the way) or what else am I doing incorrectly? I have trawled the XDA HD2 forum, but had no luck. Suggestions?
Click to expand...
Click to collapse
You don't unzip the contents. By doing so you break the signing. What you wanna do is open your ROM zip using 7 zip then browse to the initrd.gz file copy to your desktop, close everything. Now open the kernel zip file browse to the initrd-custom folder open it. Now double click and drag the initrd.gz file from your desktop to the 7-zip window which has the kernel zip opened to the initrd-custom folder.
Sent from my GT-I9100 using Tapatalk
elesbb said:
You don't unzip the contents. By doing so you break the signing. What you wanna do is open your ROM zip using 7 zip then browse to the initrd.gz file copy to your desktop, close everything. Now open the kernel zip file browse to the initrd-custom folder open it. Now double click and drag the initrd.gz file from your desktop to the 7-zip window which has the kernel zip opened to the initrd-custom folder.
Click to expand...
Click to collapse
I did exactly as you said, but still the same end result :/
aldersonalex said:
I did exactly as you said, but still the same end result :/
Click to expand...
Click to collapse
Have you tried installing the kernel without adding the initrd.gz? I remember getting that error when the download was inturupted or something. So if you still get that error without editing the zip, then it most likely is the zip file and you need to redownload. Because if you did exactly as i said then it should be working. Im a long time user of his kernel's on almost every ROM out there and never once ran into any troubles. But we will surely figure this out
Can you post a link to the ROM you are using, and i'll download it and edit the kernel then repost it in this thread for you.
---------- Post added at 03:33 PM ---------- Previous post was at 02:43 PM ----------
Here it is i found the thread. its kernel 7.2 from DM.
Here
elesbb said:
Have you tried installing the kernel without adding the initrd.gz? I remember getting that error when the download was inturupted or something. So if you still get that error without editing the zip, then it most likely is the zip file and you need to redownload. Because if you did exactly as i said then it should be working. Im a long time user of his kernel's on almost every ROM out there and never once ran into any troubles. But we will surely figure this out
Can you post a link to the ROM you are using, and i'll download it and edit the kernel then repost it in this thread for you.
---------- Post added at 03:33 PM ---------- Previous post was at 02:43 PM ----------
Here it is i found the thread. its kernel 7.2 from DM.
Click to expand...
Click to collapse
Thank you so much, is this the HWA Kernel though?
aldersonalex said:
Thank you so much, is this the HWA Kernel though?
Click to expand...
Click to collapse
Yes 7.2 hwa from dorimanx
Sent from my GT-I9100 using Tapatalk
elesbb said:
Yes 7.2 hwa from dorimanx
Click to expand...
Click to collapse
Thank you so much, I wanted to experiment whether v6.9 is better than v7.2. Would it be possible to repack that kernel too?
aldersonalex said:
Thank you so much, I wanted to experiment whether v6.9 is better than v7.2. Would it be possible to repack that kernel too?
Click to expand...
Click to collapse
Haha yes I could, I personally preferred 7.2 over 6.9 but my favorite is 6.5D xP
Did you flash the zip yet?
Sent from my GT-I9100 using Tapatalk
elesbb said:
Haha yes I could, I personally preferred 7.2 over 6.9 but my favorite is 6.5D xP
Did you flash the zip yet?
Click to expand...
Click to collapse
I flashed it with success, but it doesn't feel as snappy as tytung r3, it takes a few seconds to unlock and load programs, even clocked at 1612mhz and experimenting with ZRAM on and off. Thank you though, I will probably stick with tytung's for the moment though, did you use 7-zip to transfer the initrd.gz file?
aldersonalex said:
I flashed it with success, but it doesn't feel as snappy as tytung r3, it takes a few seconds to unlock and load programs, even clocked at 1612mhz and experimenting with ZRAM on and off. Thank you though, I will probably stick with tytung's for the moment though, did you use 7-zip to transfer the initrd.gz file?
Click to expand...
Click to collapse
Hmm i wonder if its cause i took the initrd.gz from an older version of Paranoidandroid. I have version .6 on my computer thats why i used it. I'll redownload the latest and try with that. I might even flash it myself and test it out. Maybe the lib files need to be transfered as well. Dorimanx has by far been the best kernel for myself, but i dont really care for ICS yet but when i was testing the waters i used DM kernel and i loved it. Snappy responsive and pretty awesome. It just lacks a boat load of features i rely on in CM7. CM9 claimed they will re add the features once they iron kinks out so once they release a better build i will most likely convert
elesbb said:
...but i dont really care for ICS yet but when i was testing the waters i used DM kernel and i loved it. Snappy responsive and pretty awesome. It just lacks a boat load of features i rely on in CM7. CM9 claimed they will re add the features once they iron kinks out so once they release a better build i will most likely convert
Click to expand...
Click to collapse
Very curious by this statement, and admittedly, my own android experience is limited... I've used ACA SD android for a number of months, and have switched over to ICS. Currently with ICT & DM's 6.9 kernel, but love the UI in hybrid mode of PA... and so, am really curious what you meant when you alluded to 'missing features' that were in CM7, but not CM9. What was lost? What am I missing? (sincere question) Thanks, -Rob
RobE. said:
Very curious by this statement, and admittedly, my own android experience is limited... I've used ACA SD android for a number of months, and have switched over to ICS. Currently with ICT & DM's 6.9 kernel, but love the UI in hybrid mode of PA... and so, am really curious what you meant when you alluded to 'missing features' that were in CM7, but not CM9. What was lost? What am I missing? (sincere question) Thanks, -Rob
Click to expand...
Click to collapse
Well, there are two that i pretty much LOVE and cannot live without xD
Those are,
1. Disable full screen (status bar remains visible no matter the app, has a "hide" button if you wish to use full screen in a game or app, then you can unhide by pressing home key(my choice))
2. Really big one, lockscreen gestures. I love being able to draw a 'C' on my lockscreen and open the phone whitout having a custom app slot being taken up. Plus, gestures allow for an app to run while still displaying the lockscreen.
THose are the only two big ones i will miss, there are a few more small ones but i dont remember without flashing CM9 and checking And its been awhile since ive tested the waters, so i might download the latest AOKP and CM9 to see where they are at. But they both are good and pretty cool. CM7 is just perfect for me. No issues what so ever.
elesbb said:
Hmm i wonder if its cause i took the initrd.gz from an older version of Paranoidandroid. I have version .6 on my computer thats why i used it. I'll redownload the latest and try with that. I might even flash it myself and test it out. Maybe the lib files need to be transferred as well.
Click to expand...
Click to collapse
It would be brilliant if you could test out the kernel with the initrd.gz from 1.1a PA, that might explain why it felt slow when I tested the original.
Some good news for the good old G-Tab! Cdesai, koxudaxi, humberos have finished debugging the 3. kernel for now. I've made one new build yet (it was posted from OsitKP, because i've not enough posts for yet). This build is here. Help our great developers to enhance the kernel and test it.
Some details to the build: build number: 4.2.2 JDQ39E, kernel: 3.0.70.
All Thanks to alroger for his tutorials, to cdesai, humberos , angel666, koxudaxi, pawitp, jt1134, sbradymobile etc.
Sorry for my bad english.
First results on testing the kernel:
1. Charge works only when Tab is off
2. Some Advanced settings don't work
3. No USB connection to PC
4. Wi-Fi works
5. BT works partially, just like with 2.x kernel
For those who wants to try the new kernel for GT-P1000 I've attached two CWM zips with 3.x and 2.x (for rollback) kernels
OsitKP said:
First results on testing the kernel:
1. Charge works only when Tab is off
2. Some Advanced settings don't work
3. No USB connection to PC
4. Wi-Fi works
5. BT ....
For those who wants to try the new kernel for GT-P1000 I've attached two CWM zips with 3.x and 2.x (for rollback) kernels
Click to expand...
Click to collapse
6. Sound is ok, also with headphones, bt headphones not tested.
7. Voodoo works not?
8. Monitor colors are different than before
9. Power consumption seems better then before:good:
10. Some users report that vibration works not (with me also)
Are you saying that tab doesn't charge when on?
Sent from my GT-P1000 using xda app-developers app
adi6262 said:
Are you saying that tab doesn't charge when on?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
It seems like the tab consumed to much power if the tab is on... I'm not sure, but i think galaxy s has or had similar problem... Probably the new kernel from alroger ( 3.0.74) fix it.
Alroger has reported that external sd is not mounted and tab has no usb yet. I have these bugs too..
Alroger has made its own build yet with kernel 3.0.74 and humberos fixed furthermore the bugs.
storm31 said:
Alroger has made its own build yet with kernel 3.0.74 and humberos fixed furthermore the bugs.
Click to expand...
Click to collapse
For my P1000 this kernel is much better:
Charge works now
Tab connects to PC by USB
It seems to me that tab now isn't as hot as yesterday with 3.0.70 kernel.
Emmc is mounted, but once after some gaming I saw it unmounted.
OsitKP said:
For my P1000 this kernel is much better:
Charge works now
Tab connects to PC by USB
It seems to me that tab now isn't as hot as yesterday with 3.0.70 kernel.
Emmc is mounted, but once after some gaming I saw it unmounted.
Click to expand...
Click to collapse
Humberto has commited now 3.0.75 and fixed yesterday vabrations. I try to compile today later the kernel
3.0.75 kernel for P1000
storm31 has compiled new kernel - 3.0.75.
Have not tested too much, but charge and emmc mounting works. As well as connection to PC. Youcan try attached recovery zip for P1000.
Warning!
The kernel contains broken recovery. To rollback you have to flash previous kernel via Heimdall or make a full restock.
Help meee
OsitKP said:
storm31 has compiled new kernel - 3.0.75.
Have not tested too much, but charge and emmc mounting works. As well as connection to PC. Youcan try attached recovery zip for P1000.
Warning!
The kernel contains broken recovery. To rollback you have to flash previous kernel via Heimdall or make a full restock.
Click to expand...
Click to collapse
hai @OsitKP,, i have already installed your kernel 3.0.75 but why the emmc cannot mounting?? can you help me?? can you give step for installation in my GT-P1000 europe
agus.suginantra said:
hai @OsitKP,, i have already installed your kernel 3.0.75 but why the emmc cannot mounting?? can you help me?? can you give step for installation in my GT-P1000 europe
Click to expand...
Click to collapse
I made no special steps for emmc mounting. The only thing I can assume is I've flashed last ROM (with 2.6.35 kernel) after restock. While last kernel was installed from CWM. By the way last ROM i use was compiled by storm31 who as well compiled 3.0.75 kernel (it's not mine!).
agus.suginantra said:
hai @OsitKP,, i have already installed your kernel 3.0.75 but why the emmc cannot mounting?? can you help me?? can you give step for installation in my GT-P1000 europe
Click to expand...
Click to collapse
My emmc cannot mount also. OsitKP has one build with same old components, i have one mit newer components. It is possible that they have one or more bugs. We must wait for humberos, he is the "big man" by kernel developing. I would like to mention that the kernel 3.0.xx is very experimental. The next bad thing is that recovery seems to be brocken
3.0.75 kernel compiled by storm31
CWM zip, now with working recovery.
As for emmc it is my fault (I meant usial work. But when connected to PC it's not mounted).
Vibration and display colors are not fixed yet.
And charge is very weak.
new p1 kernel:
Thanks a lot to humberos!
kmesg and kmsg for humberos:
storm31 said:
kmesg and kmsg for humberos:
Click to expand...
Click to collapse
This files are incomplete. T_T
Please, can you try to get them again.
Thanks!
humberos said:
This files are incomplete. T_T
Please, can you try to get them again.
Thanks!
Click to expand...
Click to collapse
Sorry, I noticed it too late.
dmesg:
kmsg:
i'm not sure if it complete, but it was very hard to copy the flying text from the shell to a text file
I unfortunately could not create a text file.
Sorry if it was to long
Bye
storm31 said:
new p1 kernel:
Thanks a lot to humberos!
Click to expand...
Click to collapse
CWM version of the p1 kernel.