Database Users

HD2 Nand Android Uninstall HSPL HELP!

I'm trying to go back to Stock Windows 6.5
I tried downloading the stock rom and extracting the zip to my desktop then copying the nbh file over to my SD card and renamed it to LEOIMG.nbh and booting into Boot Loader Mode but it wont load the NBH file.
Here's the settings from my Boot Loader:
-------------------------------------
PB81120 HX-B3
SPL02.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
SERIAL
Even with the USB connected it still says Serial. I tried installing HTC Sync and the rom I downloaded and extracted is "RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.5 0.07U_2.08.50.08_2_Ship"
---------------------------------
aMAGLDR v1.11
Build: Dec 31 2010 05:30:51
---------------------------------
What am I doing wrong? I tried searching for HSPL Uninstall but im not even sure what to look for. I'm probably posting in the wrong forum thread but I'm lost for words. Help?

Flash any custom wm6.5 rom thru usb. Turn the phone off, power on going into the tricolored bootloader, and as soon as you see the colors plug the USB cable from the pc, you should hear it connect and it will say USB at the bottom of the bootloader screen, then use the winmo custom ruu to flash windows, once you got windows, you can do the stock rom from sd to lock it down with stock spl, or flash stock rom after the custom rom and use the same program to install hardspl to switch to stock spl.
Sent from my HTC HD2 using XDA App

It wont detect the usb on either the phone or the computer. It worked before I installed Nand Android

It should from bootloader, try rebooting your pc and trying again.
Sent from my HTC HD2 using XDA App

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It wont detect my phone...

Does it detect your phone while in android?
Sent from my HTC HD2 using XDA App

Well its obviously a driver issue, it clearly shows you in device manager.
Right click and choose update driver or use windows update or use a program like Driver Genius or Driver Magician etc.
Also try other USB sockets.

Try connecting on android, and once connected, leave the cable in and turn off and go into bootloader and see if that makes it connect.
Sent from my HTC HD2 using XDA App

Thats exactly what I did. Sometimes Windows detects incorrect driver names so when it came up with Qualcomm i didnt know that was the phone's chipset. Updated that driver thru Windows Updates and now im back on Windows Mobile. I was freaking out for a minute.. Thanks Guys!
*RESOLVED!*

ResidentG33k said:
Thats exactly what I did. Sometimes Windows detects incorrect driver names so when it came up with Qualcomm i didnt know that was the phone's chipset. Updated that driver thru Windows Updates and now im back on Windows Mobile. I was freaking out for a minute.. Thanks Guys!
*RESOLVED!*
Click to expand...
Click to collapse
Well a click of the thanks buttons wouldn't go a miss

not used to this type of forum, i ran a forum two years ago and not familiar with the layout

[Q] T Mobile HD2 cant ask unlock code

Hello everybody!
I´m live in Brazil and a few days past I won one HD2 of T Mobile (1mb). Good News? maybe....
The issue is, when i put my sim card (TIM), because the T MO dont exists in Brazil, the HD2 dont ask me for any unlock code and neither splash any screen to input a code. I read several threads before put this one and I discovered two informations:
1- If my HD2 is LOCKED they must splash the screen to input unlock code when I put my TIM simcard. They dont do this.
2- In the windows folder of my HD2, will must exist Simlock.exe program. Just run it and input the code. My HD2 have this program and it´s dont run, simple like that.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Look at the antenna icon there is "!" and the phone dont mak calls, but it´s recognize my sim card whem i run the simmgr.exe program:
And my comm manager show this:
So what is the problem? My phone is locked or unlocked?
Some datails:
OS Version 5.2.21889 (21889.5.87)
ROM Version 2.10.531.0 (8276) WME
Radio Version 2.08.50.08_2
When i put the phone on multi color screen (press vol down and power) i have this informations:
PB81120 SS-B3
SPL-2.08.HPSL 8G XE
0X05
CotullaHSPL 0x40
Anybody help me and want gonna make happy a nice brazillian guy? I really hope so, because i have a Ferrari without engine.
I loved this fone, and i cant wondering use it only a PDA. Help!!!!
In time, all other functions of cellphone still working fine (WIFI, BT, GPS, etc)
Waiting for one good soul for help me.
Ronaldo Martins
Carrier TIM - Brazil
HTC HD2 (offline)

Go to ebay, and buy an unlock code for less than 10 USD

Ok I know about it and i really want do this, beleive me.
But how can i input unlok code if this phone dont ask for this and the simlock.exe seens dont work?

tucahunter said:
Ok I know about it and i really want do this, beleive me.
But how can i input unlok code if this phone dont ask for this and the simlock.exe seens dont work?
Click to expand...
Click to collapse
Have you tried doing a Hard reset of the HD2?
To do this power the HD2 on while holding down the volume down button and then follow the instructions on the screen. Maybe this will restore the simlock.exe to working order.

I tried do like you wrote, but hold "down vol + power" leave me to the tri-color screen and stop there. Nop hard reset.

T-Macgnolia, i reach to hard reset hold up and down vol at same time and short press on/off button. I do this and nothing change. Simlock.exe still dead. Those all informations about radio, win version, etc... any clue?

T-Macgnolia how about you or someone else send me in private msg another simlock.exe file?

Stupid me
Oh man I am so sorry I had a momentary laps of memory. I forgot to tell you to hold down both the volume up and down buttons while powering on your HD2. My stupid mistake I guess the sun fried my brain at work that day.

tucahunter said:
Hello everybody!
I´m live in Brazil and a few days past I won one HD2 of T Mobile (1mb). Good News? maybe....
The issue is, when i put my sim card (TIM), because the T MO dont exists in Brazil, the HD2 dont ask me for any unlock code and neither splash any screen to input a code. I read several threads before put this one and I discovered two informations:
1- If my HD2 is LOCKED they must splash the screen to input unlock code when I put my TIM simcard. They dont do this.
2- In the windows folder of my HD2, will must exist Simlock.exe program. Just run it and input the code. My HD2 have this program and it´s dont run, simple like that.
Look at the antenna icon there is "!" and the phone dont mak calls, but it´s recognize my sim card whem i run the simmgr.exe program:
And my comm manager show this:
So what is the problem? My phone is locked or unlocked?
Some datails:
OS Version 5.2.21889 (21889.5.87)
ROM Version 2.10.531.0 (8276) WME
Radio Version 2.08.50.08_2
When i put the phone on multi color screen (press vol down and power) i have this informations:
PB81120 SS-B3
SPL-2.08.HPSL 8G XE
0X05
CotullaHSPL 0x40
Anybody help me and want gonna make happy a nice brazillian guy? I really hope so, because i have a Ferrari without engine.
I loved this fone, and i cant wondering use it only a PDA. Help!!!!
In time, all other functions of cellphone still working fine (WIFI, BT, GPS, etc)
Waiting for one good soul for help me.
Ronaldo Martins
Carrier TIM - Brazil
HTC HD2 (offline)
Click to expand...
Click to collapse
Everything points to the fact that your HD2 is already unlocked, the phone would have informed you otherwise with a popup message to prompt you for the unlock code.
I think that either the radio / antenna of your device is defective or your SIM card is denied by the network (might be that your provider doesn't allow you to use this phone). To be sure, perform a manual network scan and see what the phone will tell you.

Did you put HardSPL on this ? can see HSPL Cotulla has been installed so if not by you someone had been flashing the device before you got it.
Point of this: perhaps it has issues hence why it was up for grabs !

I discovered that phone oly works on VIVO Carrier (Brazil), so i bought a new simcard (Vivo) them now i have the mesage when try to network register: cannot register on selected network choose another network or disconnect your data connection and try again
Any knows something about it?

tucahunter said:
I discovered that phone oly works on VIVO Carrier (Brazil), so i bought a new simcard (Vivo) them now i have the mesage when try to network register: cannot register on selected network choose another network or disconnect your data connection and try again
Any knows something about it?
Click to expand...
Click to collapse
It has nothing to do with the phone but with your SIM card. The SIM is programmed to work only with a specific device (or group of devices). Here in the US, TracFone is doing a similar thing: you can't use the TracFone SIM in another device other than the one you bought it with.

[Q] MAGLDR113_DAF jumps from 0% to 100%

Hi, I'm been trying to get my HD2 to upgrade from WMB 6.5 to 7 for the past day or so, but I always get stuck in the step where when I use MAGLDR113 the progress bar will jump from 0% to 100% after a few seconds of starting. And then on reboot it will get stuck in the white background loading splash screen with the HTC logo staring back at me.
My red/green/blue screen reads:
PB8100 SS-BC
SPL-2.08.HSPL 8B XC
CotullaHSPL
0x05 <---
0x10 <--- these numbers seems different to what people post out there...
My radio is 2.15.50.14
Been doing this over and over but nothing seems to work.

i supposed that u have successfully install the MAGLDR
Try boot your phone in to MAGLDR menu by
turn the phone off and HOLD the power button until the menu showed up.

have you tried to use HD2 NAND Toolkit? give the link below a try
it could be also that the zip File is corrupted

Do you get any error messages from RUU?
Sent from my HTC HD2 using XDA

@thamlim : holding down POWER button doesn't work, still get stuck on HTC white bootscreen
@mengfei : I've re-downloaded the .zip several times, don't think it's corrupted but won't rule it out completely. I will give the NAND toolkit a try tonight.
@hengsheng120 : How can you tell if there were error messages? I am assuming no since there were nothing that looks like error displayed on screen (desktop & phone), and RUU hasn't generated any log files that I can see.

I meant Dft flasher. No USB init failed? Does it give a successful message?

hengsheng120 said:
I meant Dft flasher. No USB init failed? Does it give a successful message?
Click to expand...
Click to collapse
Which one is the Dft flasher? The one for installing HSPL? No error with that one.
@mengfei : going through instructions in the page that you gave me, i'm still getting the same problem. If you search for the sentence "when the phone starts it will show you the magldr bootloader" in that page, that's the place where the phone boots into white background HTC logo (same one after Task29), holding down power button on startup still gives same result.

The window when you are flashing wp7, but nvm that...
food.poison said:
My red/green/blue screen reads:
PB8100 SS-BC
SPL-2.08.HSPL 8B XC
CotullaHSPL
0x05
0x10
My radio is 2.15.50.14
Click to expand...
Click to collapse
Also yes, I just noticed most of this configuration doesn't seem to match an HD2's. you sure that's what it says exactly?
Have you been able to install android roms?
From that info you gave, the SS-BC means that you have different NAND chip made by samsung instead of hynix. It should say HX-BC for most HD2's.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Other people seem also to have this same problem, they can't flash roms on ones that hd2s that have SS-BC in bootloader.
http://www.pocketpc.ch/htc-hd2-andr...tet-handy-bootloader-trotz-richtiger-spl.html
Faulty NAND may be the reason:
AndrewSh said:
Important information concerning Leo flashing algorithm:
Leo is manufactured with 2 different NAND-Flash ROM chipset types. You can detect the type entering tri-color boot mode.
If you see
PB81120 SS-B3 in the first line - that means NAND-Flash ROM from Samsung - KBY00U00VM
If you have
PB1120 HX-B3 in the first line - that means NAND-Flash ROM from Hynix - h8BFS0WU0MCR
After one year usage Samsung chipset usually has a dozen of bad clusters. Hynix normally has none of them or just a couple.
So for devices with SS-B3 and Samsung chipset recommended flashing algorithm is the following:
1. Task29
2. Task32
For devices with HX-B(3/С) and Hynix chipset - Task28 is totally acceptable.
The chipset information is provided by haccker
HD2Owner, I suppose this info should be lifted up to first or second (reserved) post
Click to expand...
Click to collapse
See this thread for more info: http://forum.xda-developers.com/showthread.php?t=917807
If your screen really says PB8100 however, which, by google search is weirdly found in mostly chinese forum posts, I suspect your device may also not be supported, but i hope it's a typo.

May be u should try Task29 again , and then try install cLK instead of MAGDLR, and see is that work?

How to install windows phone 7 on Htc hd2

Hi im new, im trying to re install the OS of my htc HD2 my phone stats is this: when i try to turn it on it just turns on in a white screen BUT when you turn it on In bootloader mode it turns on normally on booloader mode
and this is the Phone specs in bootloader mode:
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
if you guys can send me the files and the tutorial i will really aprettiate that thanks for reading

look my signature
edit:
ups, you have new model PB81120 and think this is problem.. anyone can confirm?

try this link if it helps
http://forum.xda-developers.com/showthread.php?p=25781675#post25781675

dxdy said:
look my signature
edit:
ups, you have new model PB81120 and think this is problem.. anyone can confirm?
Click to expand...
Click to collapse
Hey,
i am new... i was proceeding accordingly manual, but met some problems...
These error are after flashing:
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: Block is after end.
Info: .\RSPL\RSPL.cpp (704)
Can you help please?

set magldr settings correct before flashing

dxdy said:
set magldr settings correct before flashing
Click to expand...
Click to collapse
yes, helped... many thanks.
now issue of activation... let's search the forum... or maybe you have some shortcuts? i have used softwares from your posts. everthing is working fine so far. sometimes some unreasonable resets of the software with changed data and time afterwards. But except this all was fine. i used v8.1

for live activation code you can call Microsoft local office in your country (if exist) and ask for Live activation code for HTC HD7...
or use English chat
http://support.microsoft.com/contactus/cu_sc_selector_chat?ws=support
switch to united states
load link again
and select General Inquiries about Microsoft Products and Services or Genuine Advantage Questions
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

dxdy said:
for live activation code you can call Microsoft local office in your country (if exist) and ask for Live activation code for HTC HD7...
or use English chat
switch to united states
load link again
and select General Inquiries about Microsoft Products and Services or Genuine Advantage Questions
chat doesn' work, they need prove of purchase htc hd7...
trying with call...
any other advices?
Click to expand...
Click to collapse

only what you need to give is your name and phone number... nothing else...
if you cant get code, try here
http://forum.xda-developers.com/showthread.php?t=1532197

dxdy said:
only what you need to give is your name and phone number... nothing else...
if you cant get code, try here
http://forum.xda-developers.com/showthread.php?t=1532197
Click to expand...
Click to collapse
ok, i managed that finally...
through chat...
i have some doubts about the phone number given, what for it was?

luobote said:
i have some doubts about the phone number given, what for it was?
Click to expand...
Click to collapse
I've read here in the forums they're storing this data in a certain database...

Continous Error Msg in wp 7 rom installation
Everytime i install wp7 rom I keep getting this msg: "Readme.txt for this release is missing". How can I fix this?

hehehe this not error... just go next.... readme.txt file not included but this not important and not block flash process

[Q] Wont boot, wont take factory ROM.

Hi guys.
After triying everything i know about and searching on lots of forums and google, i decided to give good'ol XDA a shot.
Anyway, someone from my family asked me if the phone he just got from his brother would take whats app. It was a HTC HD Mini with the stock WM6.5, so i said "i don't think so", "but hey, you know what? i can install Android in it, and then you could use it like any other Android device!"
...yeah, good idea, for sure.
So i searched, and decided to follow a guide posted on HTCMania.com, wich was the translation of a ROM thread here, on xda, this one: LINK
I followed everything, and i got to the step where you have to execute a .bat file called "install LK.bat". A CMD window appeared, but something went really wrong. Or not, i dont know, the fact is that, suddenly, the phone's screen changed from black with green texts, to this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It will stay like that, no matter what you do, say, pray, etc... . In order to turn off the device, you have to remove the battery.
So i investigate a little more, and try to upload the stock WM ROM via SSPL. I do it in the bootloader menu (what a wonderfull sight after all the good years that my beloved HTC Prophet gave me...).
FAIL!!!! It says that i can go home and cry, because of an error called "ERROR [294] : INVALID VENDER ID"
Wonderfull! so i start looking for every ROM i can think off, factory, cooked, everything. I try to install them via SD card naming the ruu "PHOTIMG", and then turning on the device with the bootloader, it starts loading it, "Loading..." "Checking..." "0028002 not allow". And back to the bootloader tri-color screen.
At this point, i dont know what to do, my phone is Spanish, the service provider is Movistar, but the phone is unlocked (i dont know if it was unlocked by someone, or if it never was locked in the first place).
There are a couple of SPA ROMs outhere, one is generic, and the other is Vodafone. Not to mention, neither of the two works.
PLEASE, if someone can help me in any way, it will be MUCH appreciated.
THX to all.

go to http://www.shipped-roms.com/index.p...wrong one,then it can't flash n say error. ..

Thanks for answering, but that page should sue me for excessive bandwidth usage, LOL. I've already tried lots of ROMs from there, but not a single one would get past 1%, they all spit out the same error: 294: Invalid vender ID