Related
Hi Guru's ,
Sounding verry n00bish yes but halp needed
my HTC TYTN II had no secrets anymore for me so it was time to upgrade
I read up on kernels flashing etc and then descided to get on it
got Odin , insecure kernel (CF-Root 4.0.0.2) , and a rom (was villain 3.0)
did it all correct , kernel ok , yellow triangle and original os booted up ok
CWM , clear all and reset etc , install zip , succesfully and reboot
sticks in reboot , endless yellow triangle ...
oh wel , np , i'll redo it from original
all steps ok untill other rom , bam , stuck in boot
crap , so , again
I now descided to go for the CM 7.1 that was just launched "stable"
Other CWM and kernel from their Wiki , gives me a insecure boot (triangle) to original and ok
into CWM (4.0.1.5) , all steps again , install zip from sd card , no zip (while its on for sure !)
formatted all known formats and put zip on , doesn't see it
was pissed like **** then and re-done it serveral times , no go
tried , from stock again and again to get it working
and found the intermediate problem , CWM 4.0.1.5 !
did the >CF rooot 4.0.0.2 etc and found the zip on card that 4.0.1.5 didn't never see (wtf ?)
tried CM 7.1 then , succesfully ... reboot , nope stays booting yellow triangle
tried 2 other rom's then and a nightly CM 7.1 with the CF-root also , no show
what am I doing wrong , does anyone recognise this ?
and maybe this post is better to be in Q&A I now think
Welcome to the S2 community
So, CM 7.1 sitting on yellow triangle happened to me too, be sure to:
from clockworkmod recovery:
Wipe data/cache (factory reset)
Wipe cache
advanced -> wipe dalvik cache
mount & Storage -> format system
Then flash cm 7.1 again.
If it still sit down on yellow triangle, redo all the above, yes also the flashing (for the 2nd time in a row, i know) , and usually it will finally reboot in a working CM 7.1
Let me know if this helped or not
And yes, better in Q&A
Thx for the welcome
Let me go and redo this exactly as you said right now
a3ke said:
Let me go and redo this exactly as you said right now
Click to expand...
Click to collapse
dont forget to nandroid backup your working configuration before all
Sent from my GT-I9100 using Tapatalk
rembrandtlnx said:
dont forget to nandroid backup your working configuration before all
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I've been switching between stock rom to CM7 etc. for a while now, and it seems like I always have to flash the CM7 twice for it to work
bruflot said:
I've been switching between stock rom to CM7 etc. for a while now, and it seems like I always have to flash the CM7 twice for it to work
Click to expand...
Click to collapse
yes, As For my above instructions, seems for some reason 2x flash in a row are needed. But from when i format system, it works in a single flash
Sent from my GT-I9100 using Tapatalk
Yup, definitely need to flash the CM7 package twice in a row. My trick is to flash it once, then reboot into CWM again and flash the package again! Hope it all goes well for you.
I can happely confirm doing it all twice exactly in a row does the trick
Cm 7.1 (nightly 82) running smoothly
Can anyone confirm my idea on following :
when I start configuring contacts mailsettings etc and save then
Then do a nandroid backup (via cwm the same ???)
And I put a new rom or newer version of rom on it
If I restore , does it restore everything as a "mirror" or just the settings i made
If everything , is there a program that does what I mentioned (just the personal settings mailsettings ed ?
If you backup your ROM using CWM Nandroid recovery (booted using the volume up + home + power button combo), you will have a mirror image of everything on your phone right now. A Titanium Backup is useful if you were to transfer your user apps from one ROM to another after a full wipe; wise to do a full wipe moving from a different ROM to another.
You can restore your CWM Nandroid backup in case anything happens.
Another point I would like to add is if you are updating from an earlier version of CM7, you can just flash the upate package without any wipe. You will not loose data in the process.
Sent from my GT-I9100 using XDA App
-Solved btw-
Hey all. I've just tried installing CM9 using the instructions HERE.
I used the second options..
How To Flash ICS(Defy Builds)
1:Head Over To Stable recovery
2:Wipe Data
3:Install ZIp from SD Card
4:Select ICS(Defy) .zip
5:Flash
6:Flash Gapps and CM7 Kernel
7:Clear Cache and Dalvik Cache
Click to expand...
Click to collapse
I used the most recent CM9 rom from here.
(CM9-NIGHTLY-120319-Defy.zip 19-Mar-2012 23:15 104M )
I got my kernels from this thread. I've tried both CM7 (2.2 kernel) and CM9 (2.3 kernel). With the CM7 2.2 Kernel, I get stuck on the "Motorola" logo, and with CM9 2.3 kernel I get stuck on the CM9 boot logo (1 hour + now)
From the FAQ thread I found this (below), but as I said I've tried both kernels.
FAQ:
Q: I installed 08/12 build(or newer), but it gets stuck at the CM boot logo. What do I do?
07/12 contains the required 2.3 kernel. 08/12 and newer do not. If you have installed 08/12 or newer, enter recovery and flash the 2.3 kernel, then reboot. This applies only to Defy owners; Defy+ owners already have 2.3 stock ROM and kernel, so they do not need to apply the kernel.
In fact, the kernel zip for Defy owners is the kernel from Defy+.
Click to expand...
Click to collapse
I've tried everything I can think of. Can anyone help?
Thanks.
pk92 said:
Hey all. I've just tried installing CM9 using the instructions HERE.
I used the second options..
I used the most recent CM9 rom from here.
(CM9-NIGHTLY-120319-Defy.zip 19-Mar-2012 23:15 104M )
I got my kernels from this thread. I've tried both CM7 (2.2 kernel) and CM9 (2.3 kernel). With the CM7 2.2 Kernel, I get stuck on the "Motorola" logo, and with CM9 2.3 kernel I get stuck on the CM9 boot logo (1 hour + now)
From the FAQ thread I found this (below), but as I said I've tried both kernels.
I've tried everything I can think of. Can anyone help?
Thanks.
Click to expand...
Click to collapse
Hi,
Can you also provide the following info:
Which ROM did you have as stock?(Was it a froyo kernel or GB kernel as stock)
If you already had GB ROM in your phone you don't need the kernels to be installed!
It was a Froyo kernel
He's right. U don't have to flash a kernel if u were on froyo (2.6.32.9-gb08c3c8). Just make a wipe after installing the cm9 rom.
U only have to pick the right version. There are froyo-cm9 builds and GB-cm9 builds (so if u are on GB-kernel right now, take a GB-Build).
Or try the "codename android 1.5.5"... (froyo-kernel!) it's ported from the nexus
I'm testing this rom right now and for me it's working much better than cm9 builds.
Greetz
I recieved a pm suggesting installing cm7 then cm9 over, but more bootloop..
Sent from my Huawei_8100-9 using XDA
Oh, its a cm7 bootloop now by the way, forgot to mention that
Sent from my Huawei_8100-9 using XDA
pk92 said:
Oh, its a cm7 bootloop now by the way, forgot to mention that
Sent from my Huawei_8100-9 using XDA
Click to expand...
Click to collapse
Well, I think there is no need to flash cm7 before? (I didn't and it worked, correct me if I talk bull****)
Try to install the zip, and AFTER that make a wipe (do not boot in system after installing, first the wipe than boot!)
Is it a quark or epsy? When I flashed the epsy over quark I had big problems so I had to start again.
I have no idea if it's Quark or Epsy :S
hboy1337 said:
Well, I think there is no need to flash cm7 before? (I didn't and it worked, correct me if I talk bull****)
Try to install the zip, and AFTER that make a wipe (do not boot in system after installing, first the wipe than boot!)
Is it a quark or epsy? When I flashed the epsy over quark I had big problems so I had to start again.
Click to expand...
Click to collapse
pk92 said:
I have no idea if it's Quark or Epsy :S
Click to expand...
Click to collapse
Hi,
Well you are correct you do not need to flash CM9 above CM7! it's Quark or Epsy do not matter. What matters is the kernel! If you have a Defy+ or stock GB use the CMs for Defy+(preferably Quarx's because they are more updated and he is the only dev with a Defy+) and don't flash any extra kernels. If you have Defy or Froyo kernel then use CMs for Defy. Always remember two golden rules after flashing ROMs:
1.) Wipe data.
2.) Wipe Dalvik.
In fact even after or before a full SBF you may not be able to boot until you do a data wipe from stock recovery! (Seen that in some cases and in mine case too!) ....
pranks1989 said:
Hi,
Well you are correct you do not need to flash CM9 above CM7! it's Quark or Epsy do not matter. What matters is the kernel! If you have a Defy+ or stock GB use the CMs for Defy+(preferably Quarx's because they are more updated and he is the only dev with a Defy+) and don't flash any extra kernels. If you have Defy or Froyo kernel then use CMs for Defy. Always remember two golden rules after flashing ROMs:
1.) Wipe data.
2.) Wipe Dalvik.
In fact even after or before a full SBF you may not be able to boot until you do a data wipe from stock recovery! (Seen that in some cases and in mine case too!) ....
Click to expand...
Click to collapse
What I usually do when installing roms is this:
-Enter Stable Recovery
-Factory reset & clear data
-Install Zip from SD Card (Defy CM9.zip)
-Wipe cache
-Wipe dalvik cache.
So I need to do a Factory reset & data wipe in stock before flashing CM9?
I've managed to get the CM9-NIGHTLY-120112-Defy+.zip rom working from here.
I installed the CM7 kernel, then the CM9 kernel ontop of that, then installed gapps, and wiped cache/dalvik. (though I'm not sure wiping dalvik worked, as when I clicked it it just refreshed, didn't give me the option to confirm that I want to wipe dalvik)
However, this doesn't have any mobile network, and a lot of settings options are missing..
I'm still trying to get the CM9-NIGHTLY-120319-Defy.zip rom working from here working, but it's stuck on the bootloop.
If I try the baseband switcher in-rom then it asks me to restart, and then once it has restarted it goes back to factory settings (the welcome screen to set up the "new" phone)
pk92 said:
I've managed to get the CM9-NIGHTLY-120112-Defy+.zip rom working from here.
I installed the CM7 kernel, then the CM9 kernel ontop of that, then installed gapps, and wiped cache/dalvik. (though I'm not sure wiping dalvik worked, as when I clicked it it just refreshed, didn't give me the option to confirm that I want to wipe dalvik)
However, this doesn't have any mobile network, and a lot of settings options are missing..
I'm still trying to get the CM9-NIGHTLY-120319-Defy.zip rom working from here working, but it's stuck on the bootloop.
If I try the baseband switcher in-rom then it asks me to restart, and then once it has restarted it goes back to factory settings (the welcome screen to set up the "new" phone)
Click to expand...
Click to collapse
For CM9 you can do a data wipe from CWm itself, don't do from stock. Only if you do a full SBF flash do a data wipe from stock. And the CM9 you are using is toooo old!!! Quarx's CM9 for Defy+ are much newer! So try that here . 17th March is the latest one. That should run fine.. Worked great for me..
Hey I see once you were using CM for Defy(Dint work for you as you got bootloop) and next moment you were trying CM9 for Defy+(which worked) !!! :O First be sure which kernel you have in your original ROM(flashed SBF)!!
pranks1989 said:
For CM9 you can do a data wipe from CWm itself, don't do from stock. Only if you do a full SBF flash do a data wipe from stock. And the CM9 you are using is toooo old!!! Quarx's CM9 for Defy+ are much newer! So try that here . 17th March is the latest one. That should run fine.. Worked great for me..
Hey I see once you were using CM for Defy(Dint work for you as you got bootloop) and next moment you were trying CM9 for Defy+(which worked) !!! :O First be sure which kernel you have in your original ROM(flashed SBF)!!
Click to expand...
Click to collapse
I eventually decided to flash a froyo SBF (2.2.2), and flashed CM9 Defy from here. Suggested to me by Pottkopp.
I didn't flash any kernel and it worked fine.
Also installed Pottkopp's AIO.
So, all solved
Can someone help me?
Ok!
So i have green lensed defy. I already had CM9 installed( installed it using normal procedure). So i decided i will return to stock, by recovering backup. So i did. After a while on stock, i decided to go back to CM9. I forgot to do factory reset, and after install wipe chache and dalvik.I booted phone, and entered requesting data. I after that got back to recovery and did factory reset via custom recovery, and installed it again using correct method. My phone seems a bit slower than before, and did i damaged my phone?
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
If you get stuck at the logo screen try using a different compilation of CMW.
If you meet bootloop try wiping cache and Dalvik cache.
LilSasa said:
If you get stuck at the logo screen try using a different compilation of CMW.
If you meet bootloop try wiping cache and Dalvik cache.
Click to expand...
Click to collapse
okay i will try it, anyway what are other compilation of CMW?
AldRezaine said:
okay i will try it, anyway what are other compilation of CMW?
Click to expand...
Click to collapse
There's oneby skins and one by madteam. Search and you'll find it. Btw, flash to stock rom using Odin (if you're on a custom rom) before flashing hyperion.
Sent from my GT-S5360 using xda premium
AldRezaine said:
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
Click to expand...
Click to collapse
after flashing DXLF1, try flashing EVO-X2.1 first then Hyperion (that's what I did). I used Merruk's CWM it has a much cleaner interface. :3
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
anasdcool71 said:
There's oneby skins and one by madteam. Search and you'll find it. Btw, flash to stock rom using Odin (if you're on a custom rom) before flashing hyperion.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Still not working. I already flashed back to stock rom but failed.
vangeodee said:
after flashing DXLF1, try flashing EVO-X2.1 first then Hyperion (that's what I did). I used Merruk's CWM it has a much cleaner interface. :3
Click to expand...
Click to collapse
It works but when I install Link2Sd app my phone reboot itself and stuck in the boot screen.
Ramdan2478 said:
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
Click to expand...
Click to collapse
I will give it try and see if it works..
I don't think your supposed to use Link2SD?
Ohhhh leave it try to flash ussrv6 it's awesome man very smooth fast and stable than hperion...
Sent from my GT-S5360 using xda premium
Ramdan2478 said:
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
Click to expand...
Click to collapse
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
AldRezaine said:
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
Click to expand...
Click to collapse
wipe dalvik cache
AldRezaine said:
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
Click to expand...
Click to collapse
Link2SD and App2SD requires EXT3 partitioning on your SD card so you can have an extension of your phone memory on your SD card.
Swapper does the same, you need a nameless partition that your phone can put swap files into so as to reduce RAM usage.
Chainfire 3d requires plugins to properly function. It may be installed but not functional due to the fact that you may not have installed any plugins.
So link2sd ad swapper requires partitioning (theres a guide for that) and chainfire 3d requires plugins (google it)
Ameya0909 said:
wipe dalvik cache
Click to expand...
Click to collapse
Already did sir a million times but still problem persist..
vangeodee said:
Link2SD and App2SD requires EXT3 partitioning on your SD card so you can have an extension of your phone memory on your SD card.
Swapper does the same, you need a nameless partition that your phone can put swap files into so as to reduce RAM usage.
Chainfire 3d requires plugins to properly function. It may be installed but not functional due to the fact that you may not have installed any plugins.
So link2sd ad swapper requires partitioning (theres a guide for that) and chainfire 3d requires plugins (google it)
Click to expand...
Click to collapse
Thanks sir for sharing your knowledge but I think already know about it...
AldRezaine said:
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
Click to expand...
Click to collapse
it also happened to my SGY,
This is what I did - (hope this will help)
1. Flash your SGY to baseband DXLF1/DXLF2 via odin
2. Root it.
3. Reboot to Recovery Mode --> do data reset at wipe cache (2x each)
4. Flash Hyperion via CWM
5. After installation, still in CWM go to advance --> reboot recovery --> then flash kernel via CWM
6. After kernel installs, do data reset, wipe cache 2x AGAIN, then --> go to advance --> wipe dalvik 2x also
7. Then REBOOT (wait 2-4mins until cellphone fully starts)
yehs14 said:
it also happened to my SGY,
This is what I did - (hope this will help)
1. Flash your SGY to baseband DXLF1/DXLF2 via odin
2. Root it.
3. Reboot to Recovery Mode --> do data reset at wipe cache (2x each)
4. Flash Hyperion via CWM
5. After installation, still in CWM go to advance --> reboot recovery --> then flash kernel via CWM
6. After kernel installs, do data reset, wipe cache 2x AGAIN, then --> go to advance --> wipe dalvik 2x also
7. Then REBOOT (wait 2-4mins until cellphone fully starts)
Click to expand...
Click to collapse
What kernel Im going to flash...? HYPERION has built-in kernel already..
Title says it all: I get symlink: some symlinks failed, status 7 error, installation aborted when I try to install Quarx's CM10 (2nd boot). Haven't tried any other JB, since I can't find any that fits. Maybe something with 2nd boot? It seems not to work on my phone...
I tried google-ing the problem, found some information about removing lines from updater-script, but the line was not even there (something with asserts).
Defy red lens MB525
Try a system wipe. That error is because of some filesystem problem, not 2ndboot
Sent from my MB526 using Tapatalk 2
I tried wiping with AROMA wiper yesterday: ext4, wipe data, system, cache, dalvik, then NO reboot and install cm 10... it failed as hell.
ive had the same issue as you with cm10 2ndboot. i moved on after trying to get it installed for months. 10.2 is awesome! just make sure you start from a fresh sbf flash and reroot and all that jazz. also, start with twrp!
undyingvisage58 said:
ive had the same issue as you with cm10 2ndboot. i moved on after trying to get it installed for months. 10.2 is awesome! just make sure you start from a fresh sbf flash and reroot and all that jazz. also, start with twrp!
Click to expand...
Click to collapse
thanks for the advice but i can't seem to install twrp. goomanager is not available for stock éclair/froyo, and without installing any cwm i can't install twrp. also, i tried to install twrp from cm9's cwm, it wrote success but after reboot i still had cwm. WUT
Dummy question: did you try to download another ROM?s zip file ?
Alka-Seltzer PLUS said:
Dummy question: did you try to download another ROM?s zip file ?
Click to expand...
Click to collapse
I tried different nightlies of JB 4.1, 4.2, 4.3, MIUI JB. Also did clean install with 0 success. I'm getting close to the problem, and reached this far:
1.: My CWM (5.x.x.x) does not support the 2nd boot updater script. I don't know how could I upgrade to CWM v6 (seriously, I searched a lot but nothing.)
2.: I can't install TWRP. I mean... Éclair and froyo does not support GooManager to install from an app, and I can only install CWM from 2ndinit.apk. From CWM I install TWRP, it says: "Whoah you are great bro, reboot recovery!" I do that and boom CWM again.
Srsly.: HOW can this happen to me? Other ppl resolved this problem by flashing DFP sbf to their normal Defy (red lens). I won't do that. You know, there must be a way I can install CWM v6 or TWRP. But how? If anyone gives me a solution for my problem which is going on for half a year... I'll get a heart attack I'll be so happy
Uhm.... recently i had to start from SBF and had no problem installing last ( Quarx's ) build of 4.1.2 after having installed the first 2ndinit i downloaded from the web ... so... write exactly your steps ( i know, i know, .. but .... where'R talking through a monitor and misunderstandings are waitnig for us )
Alka-Seltzer PLUS said:
Uhm.... recently i had to start from SBF and had no problem installing last ( Quarx's ) build of 4.1.2 after having installed the first 2ndinit i downloaded from the web ... so... write exactly your steps ( i know, i know, .. but .... where'R talking through a monitor and misunderstandings are waitnig for us )
Click to expand...
Click to collapse
I start from sbf (Froyo). Install 2ndinit apk, install 2ndinit, reboot, wipe data cache dalvik, (try to) install cm10.x > status 0 or status 7
I start from cm9(epsylon build). Reboot into recovery, (try to) install cm10.x > status 0 or status 7
I start from cm9(epsylon build). Reboot into recovery, AROMA Wipe (system, data, cache) into Ext4, (try to) install cm10.x > status 0 or 7
After these, I can't revert to any rom even if i format to ext3 with AROMA Wiper. Cuz' my defy goes soft-bricked and i have to recover it RSD Lite.
Do not reboot after wiping/formatting system. Immediately flash some ROM. Ext3 --> CM7.
Sent from my MB526 using xda app-developers app
gyorgyszemok said:
I start from sbf (Froyo). Install 2ndinit apk, install 2ndinit, reboot, wipe data cache dalvik, (try to) install cm10.x > status 0 or status 7
I start from cm9(epsylon build). Reboot into recovery, (try to) install cm10.x > status 0 or status 7
I start from cm9(epsylon build). Reboot into recovery, AROMA Wipe (system, data, cache) into Ext4, (try to) install cm10.x > status 0 or 7
After these, I can't revert to any rom even if i format to ext3 with AROMA Wiper. Cuz' my defy goes soft-bricked and i have to recover it RSD Lite.
Click to expand...
Click to collapse
No rooting between sbf (Froyo) and installing 2ndinit apk ?
hotdog125 said:
Do not reboot after wiping/formatting system. Immediately flash some ROM. Ext3 --> CM7.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
Ehm, I didn't reboot after system format, I know that I shouldn't or I get softbricked.
Alka-Seltzer PLUS said:
No rooting between sbf (Froyo) and installing 2ndinit apk ?
Click to expand...
Click to collapse
Yea. It's rooted by default when i flash it....
gyorgyszemok said:
Yea. It's rooted by default when i flash it....
Click to expand...
Click to collapse
I would try to check the md5 at this point
gyorgyszemok said:
Ehm, I didn't reboot after system format, I know that I shouldn't or I get softbricked.
Click to expand...
Click to collapse
I started with sbf, Framaroot, 2ndinit. Then I directly flashed CM10 (9th July) and it flashed successfully. The latest dual recovery has CWMv6, but it's only for CM10 ROMs. Have you tried pre-TWRP builds (maybe the November builds)?
Or maybe, other ROMs like PA, PAC, etc.?
gyorgyszemok said:
Title says it all: I get symlink: some symlinks failed, status 7 error, installation aborted when I try to install Quarx's CM10 (2nd boot). Haven't tried any other JB, since I can't find any that fits. Maybe something with 2nd boot? It seems not to work on my phone...
I tried google-ing the problem, found some information about removing lines from updater-script, but the line was not even there (something with asserts).
Defy red lens MB525
Click to expand...
Click to collapse
Happened to me to before. Try change your kernel. Stock kernel cant flash cm10 and its variant. It'll give status 7 error. When i change to other kernel ex;BL v12 no problem at all.
aiis89 said:
Happened to me to before. Try change your kernel. Stock kernel cant flash cm10 and its variant. It'll give status 7 error. When i change to other kernel ex;BL v12 no problem at all.
Click to expand...
Click to collapse
I forgot to add that my problem got resolved like a month ago.
My main problem was that I couldn't install any JB rom because of status 0, status 7 or bootloop (always), so I went radical:
I flashed DFP231.sbf (for defy plus) on bayer lens defy (MB525!), used Framaroot to root, installed LATEST(!) cwm, and then I could install CM10.x with no problem!
Hey there.So, I tried installing Miui 7 (weekly updated one) after following the steps accurately,but it says,failed to extract dir from system to system.I tried running it from both internal storage and external,and re-downloading it,but to no avail. Help please ?Oh, and I was running ED300's cm12.1 update 8 (now on update 10,which actually sucks very much)
MASK10101012 said:
Hey there.So, I tried installing Miui 7 (weekly updated one) after following the steps accurately,but it says,failed to extract dir from system to system.I tried running it from both internal storage and external,and re-downloading it,but to no avail. Help please ?Oh, and I was running ED300's cm12.1 update 8 (now on update 10,which actually sucks very much)
Click to expand...
Click to collapse
Reboot to recovery>>wipe system, data, cache, dalvik cache>>install zip>>select MIUI zip>>reboot
Note: Sometimes, the MIUI rom shows error at first time. So again select install zip and select the MIUI zip, without rebooting.
sasukay said:
Reboot to recovery>>wipe system, data, cache, dalvik cache>>install zip>>select MIUI zip>>reboot
Note: Sometimes, the MIUI rom shows error at first time. So again select install zip and select the MIUI zip, without rebooting.
Click to expand...
Click to collapse
I didn't reboot at all,did it just like above ^^
MASK10101012 said:
Hey there.So, I tried installing Miui 7 (weekly updated one) after following the steps accurately,but it says,failed to extract dir from system to system.I tried running it from both internal storage and external,and re-downloading it,but to no avail. Help please ?Oh, and I was running ED300's cm12.1 update 8 (now on update 10,which actually sucks very much)
Click to expand...
Click to collapse
Try to flash stock rom first then flash miui rom.
Hope this help
MASK10101012 said:
I didn't reboot at all,did it just like above ^^
Click to expand...
Click to collapse
Okay, so try this, reboot into recovery, wipe the directories, then choose reboot to recovery from reboot option....then flash the MIUI zip
I have same problem tomorrow.
I have same problem tomorrow when I was flashing ASUS ZenFone UI Rom.It was get error7 so I will try twrp 3 new version.But no effect then I will again flashed my old twrp and then flash it's work for me.
I were wipe cache only....(do not full wipe,system,data,internal former)
I hope this method is work.
sasukay said:
Okay, so try this, reboot into recovery, wipe the directories, then choose reboot to recovery from reboot option....then flash the MIUI zip
Click to expand...
Click to collapse
Okay so I need more help. I think I'll also be flashing phantom kernel.after installing miui. Haven't started yet but will soon. The problem is that I'm a complete noob with kernels. So... What are the things I'm gonna have to do ? CM12.1 just keeps getting worse with each update .??
MASK10101012 said:
Okay so I need more help. I think I'll also be flashing phantom kernel.after installing miui. Haven't started yet but will soon. The problem is that I'm a complete noob with kernels. So... What are the things I'm gonna have to do ? CM12.1 just keeps getting worse with each update .����
Click to expand...
Click to collapse
Just download the zip and flash it. And set the settings as mentioned in the phantom kernel post using Kernl Adiutor app.
sasukay said:
Just download the zip and flash it. And set the settings as mentioned in the phantom kernel post using Kernl Adiutor app.
Click to expand...
Click to collapse
OK I'll start soon. I hope I have no probs.. Thanks!