Related
Hi,
I recently installed some NAND android (i.e. miui 1.4.29) roms (magldr), they work perfectly. I also partitioned my sd card with 1GB ext3(also tried other values) and in my system info it says there is available a2sd+ memory. But on every rom and with every install I have a maximum of +-7.5MB internal memory space of which +-1.5MB is free to use. So if I install 1 app my memory is full and i can't read my sms messages etc.... Why do other users have 100MB+ free space? Is there a way to check where all that memory is being used? (overall?), At install I wiped my device fyi.
thanks in advance,
Jo
jovoud said:
Hi,
I recently installed some NAND android (i.e. miui 1.4.29) roms (magldr), they work perfectly. I also partitioned my sd card with 1GB ext3(also tried other values) and in my system info it says there is available a2sd+ memory. But on every rom and with every install I have a maximum of +-7.5MB internal memory space of which +-1.5MB is free to use. So if I install 1 app my memory is full and i can't read my sms messages etc.... Why do other users have 100MB+ free space? Is there a way to check where all that memory is being used? (overall?), At install I wiped my device fyi.
thanks in advance,
Jo
Click to expand...
Click to collapse
hi,
Are you flashing the correct cwm recovery that the Dev recommends in the [OP]?
Flashed from my fingers to your face
I've got a worse problem, I'm trying several ROMs for my HTC HD2 but each and every ROM only gives me like 0.5 MB internal memory....I'm lost i don't any idea what to do , any suggestions for me?
Setting the correct partition size each rom?
pumamasterr said:
I've got a worse problem, I'm trying several ROMs for my HTC HD2 but each and every ROM only gives me like 0.5 MB internal memory....I'm lost i don't any idea what to do , any suggestions for me?
Click to expand...
Click to collapse
can you tell us your device spec, magldr/clk/ partition size/flash.cfg etc
my guess is...you have EU HD2 and you flashed a 350> partition
did you install a radio that allows 576mb ram? I am not an expert but that is needed and there are several available. Also, post as many details about your phone and what you did so that the Developers have enough information to help you better.
http://forum.xda-developers.com/showthread.php?t=939682
this is an excellent guide I thought that it was stickied but I cant find it, just scroll until you find the guide. make sure you followed all the steps.
hope this helps.
stephenbrinson said:
did you install a radio that allows 576mb ram?
Click to expand...
Click to collapse
If he hadn't, magldr wouldn't start, android wouldn't boot.
Use it http://forum.xda-developers.com/showthread.php?t=1310309
i flash my htc hd2 with (nand) Android gingerbread 2.3.2
everything goes fine
but after installation my ph didnt support sd card and my data connection is not working.
i searched whole forum but didnt find help regarding this
please help thanks mandeep
msbhamrba said:
i flash my htc hd2 with (nand) Android gingerbread 2.3.2
everything goes fine
but after installation my ph didnt support sd card and my data connection is not working.
i searched whole forum but didnt find help regarding this
please help thanks mandeep
Click to expand...
Click to collapse
well first off we need alot more information
like what rom did you flash for starters
msbhamrba said:
i flash my htc hd2 with (nand) Android gingerbread 2.3.2
everything goes fine
but after installation my ph didnt support sd card and my data connection is not working.
i searched whole forum but didnt find help regarding this
please help thanks mandeep
Click to expand...
Click to collapse
Whichever ROM you're using is extremely old, so it may have even been a known issue of that ROM (although I highly doubt that) but we need more information as Kamerius said. For the mobile network issue, have you checked that the APN settings are correct?
thanks for reply but...
Thanks to all who replied but as I am new I tell you how I proceeded
I installed active sync in my PC then I flash my HTC hd2 with HSPL4
Then I flash radio 2.15.50.14
Then magldr 113
Then android 2.3.2 all by DFT
Problems that I am facing are
When I insert SD card (on top of the phone)-message. Comes SD card safe to remove and when I try to mountt same message appear, and some times it says SD card is busy. But I tried new sd card and same problem appears
Second problem mobile is not sync up with PC.
Thanks please. Help
msbhamrba said:
Thanks to all who replied but as I am new I tell you how I proceeded
I installed active sync in my PC then I flash my HTC hd2 with HSPL4
Then I flash radio 2.15.50.14
Then magldr 113
Then android 2.3.2 all by DFT
Problems that I am facing are
When I insert SD card (on top of the phone)-message. Comes SD card safe to remove and when I try to mountt same message appear, and some times it says SD card is busy. But I tried new sd card and same problem appears
Second problem mobile is not sync up with PC.
Thanks please. Help
Click to expand...
Click to collapse
Well, can you link me to that ROM please? I wasn't aware that there were any ROMs by DFT outside of the Stock Desire one, so I'd like to see it (although it isn't necessary of course).
You're using an extremely old and outdated method of flashing anyway, everything nowadays is flashed via CWM. See this guide and start by using the wipe data thing in MAGLDR, then just skip to flashing CWM with the correct partition sizes etc. It might not necessarily solve your issue, but you might as well do it nonetheless.
Are you trying to insert the SD card after the phone has booted? Just leave it in the phone and turn it on, I don't see any reason it shouldn't work other than if it was a known bug of the ROM or if your SD card is the one with the issues.
I'm confused about your second issue. The OP says that your data connection isn't working (data being mobile network) but the second post says that it's the USB connection to the PC that isn't working? Which one is it? Or are both of them not working?
msbhamrba said:
Thanks to all who replied but as I am new I tell you how I proceeded
I installed active sync in my PC then I flash my HTC hd2 with HSPL4
Then I flash radio 2.15.50.14
Then magldr 113
Then android 2.3.2 all by DFT
Problems that I am facing are
When I insert SD card (on top of the phone)-message. Comes SD card safe to remove and when I try to mountt same message appear, and some times it says SD card is busy. But I tried new sd card and same problem appears
Second problem mobile is not sync up with PC.
Thanks please. Help
Click to expand...
Click to collapse
My suggestion - flash HSPL 2.08 - from what I heard it's much less buggy and I haven't heard anyone having issues with that.
one thing more
Mine mobile
is anomaly htc hd2 its not from T-Mobile, I purchased it in India only.
msbhamrba said:
Mine mobile
is anomaly htc hd2 its not from T-Mobile, I purchased it in India only.
Click to expand...
Click to collapse
That's fine, it just means it's an EU/International HD2 rather than a TMOUS. The only difference (spec-wise) is that it has 512Mb ROM rather than 1024Mb
Daycrawler said:
My suggestion - flash HSPL 2.08 - from what I heard it's much less buggy and I haven't heard anyone having issues with that.
Click to expand...
Click to collapse
HSPL4 means the package which is used to flash HSPL2.08, it's not a SPL version in itself. The highest SPL/HSPL version is 3.03.
sync
Sync with PC is not working ,mobile conn
ction started after setting. Apn manually.
msbhamrba said:
Sync with PC is not working ,mobile conn
ction started after setting. Apn manually.
Click to expand...
Click to collapse
OK, well as I said try following the guide I posted, as nobody uses the DAF.exe flashing method anymore.
.
Is it possible to get window6.5 back, please provide me the link and way.
Or any other android which is fully compatible with. HTC. Hd2
msbhamrba said:
Is it possible to get window6.5 back, please provide me the link and way.
Or any other android which is fully compatible with. HTC. Hd2
Click to expand...
Click to collapse
Please, just read the guide I posted. Every single version of Android which is in the NAND Development section is 'fully compatible' with the HD2. If you don't do some more reading I refuse to help you, sorry.
Nigeldg said:
Please, just read the guide I posted. Every single version of Android which is in the NAND Development section is 'fully compatible' with the HD2. If you don't do some more reading I refuse to help you, sorry.
Click to expand...
Click to collapse
thsnaks for the guide
one last thing could you please suggest me best rom a2sd or nand which works with cwm
msbhamrba said:
thsnaks for the guide
one last thing could you please suggest me best rom a2sd or nand which works with cwm
Click to expand...
Click to collapse
There is no 'best ROM', it's all a matter of opinion. I prefer ICS ROMs such as NexusHD2 and IceCreamTosti because of the HWA capabilities, but you may not like them. It varies between each user. If you decide to flash one of these, you can create an EXT partition on your SD card and use the app Link2SD from the Play store to use that partition.
Nigeldg said:
There is no 'best ROM', it's all a matter of opinion. I prefer ICS ROMs such as NexusHD2 and IceCreamTosti because of the HWA capabilities, but you may not like them. It varies between each user. If you decide to flash one of these, you can create an EXT partition on your SD card and use the app Link2SD from the Play store to use that partition.
Click to expand...
Click to collapse
thanks for you help till now
i succ sefull y installed [16 MAY 2012][MAGLDR/cLK]TyphooN CyanogenMod 7.2 RC2 v3.8.3[2.3.7][A2SD+][tytung r14] through cwm everything is workign fine
but iw ould like to ask you one thing like you said "If you decide to flash one of these, you can create an EXT partition on your SD card and use the app Link2SD from the Play store to use that partition" i created partion using cwm and installed aap2sd from the market its working great,
but i dont that the partion created by cwm is ext or not
one thing more wht is the difference between ics roms and other roms
msbhamrba said:
thanks for you help till now
i succ sefull y installed [16 MAY 2012][MAGLDR/cLK]TyphooN CyanogenMod 7.2 RC2 v3.8.3[2.3.7][A2SD+][tytung r14] through cwm everything is workign fine
but iw ould like to ask you one thing like you said "If you decide to flash one of these, you can create an EXT partition on your SD card and use the app Link2SD from the Play store to use that partition" i created partion using cwm and installed aap2sd from the market its working great,
but i dont that the partion created by cwm is ext or not
one thing more wht is the difference between ics roms and other roms
Click to expand...
Click to collapse
Did you follow the guide I linked fully? Including step number 2 - partition your storage card for a2sd ROMs? If so, then this is an EXT partition which you have created on your SD card with CWM. If you meant repartitioning the NAND with CWM (i.e. in your case flashing a 150Mb partition) then this is NOT on the SD card and isn't an SD EXT. However, since you have stated that the app App2sd works fine, I think you've done everything correctly. Congrats, you now have a fully functional Android HD2.
The ROM you chose (TyphooN) is a very good one, I used it myself as my standard ROM for the whole of 2011 and a bit of 2012 and it was absolutely great, but right now I personally feel that ICS ROMs are better. ICS is simply the latest version of Android (GB is Android 2.3, ICS is Android 4.0) and it's the best version of Android by far. As well as this, ICS ROMs have full Hardware acceleration. This basically means that games and videos will play a LOT faster on ICS than on GB.
Let me start by saying I've always ran AmeriCanAndroid from SD on my old HD2 (stock, with WM6.5). But that phone is nearing its demise so I bought another slightly used HD2.
The new HD2 had MAGLDR installed and was booting MIUI from NAND.
Because I've always used SD versions of Android ROMS, this whole MAGLDR and NAND thing is completely new to me. So I'm positive my answers might have been answered (many times) before but since I'm so new to this, I have no clue what to search for.
Anyway, I replaced the MIUI ROM on the HD2 with AmeriCanAndroid, made a complete backup of the old HD2 using Titanium Backup and started to restore it on the new HD2. After just a few apps, I was told my phone was "Low on Space". After some searching here and on Google, I found out that to increase storage space, you need to create an EXT3 partition on your SD card then use an app like S2E.
I created an EXT3 partition on the SD (using Minitool Partition Manager on Windows) and installed S2E. However, when I start S2E, all options to move data to the SD card are grayed out. If I click the (I) icon, it shows it doesn't find "SD-EXT".
If I go into File Manager, I can see a SD-EXT folder just fine.
So what am I doing wrong here?
I suggest to try Link2SD from Play market. It is really easy to use and has nice interface.
s2e, doesn't that only work on cm roms? american is aosp isn't it?
<hint>
line one of the s2e playstore page says
S2E works only with CyanogenMod7 and CyanogenMod9!
</hint>
go have a read, and find out what aokp, aosp and cm7/cm9/cm10 in the title of a rom means, and you'll have a much better chance of picking an a2sd script that works for you.
try the INT2EXT+ script from this thread: http://forum.xda-developers.com/showthread.php?t=1716124
works fine for me with NexusHD2 rom.
JamilG said:
I suggest to try Link2SD from Play market. It is really easy to use and has nice interface.
Click to expand...
Click to collapse
Bump on that, i use it with the [17.Sep.2012] NexusHD2-ICS-4.0.4-CM9-HWA V2.7 [NativeSD][tytung_HWA_r3.4] rom and it works perfectly.
Its very importatn that the Link2SD app is the first thing you install on your phone.
good luck!
deskicio said:
Bump on that, i use it with the [17.Sep.2012] NexusHD2-ICS-4.0.4-CM9-HWA V2.7 [NativeSD][tytung_HWA_r3.4] rom and it works perfectly.
Its very importatn that the Link2SD app is the first thing you install on your phone.
I also use Tuytung's ICS..(most stable ROM)..But Link2SD always gave me issues of 'low memory'..and max 'extra space' I had was 90MB...
So I read the INT2EXT thread and did a fresh installation & immediately flashed the INT2EXT+ script, then installed all my apps..it works wonders...super speed,extremely large memory (200mb +) and no annoying "apps has been linked to sd" notifications..I have a 500mb sd-ext partition and about 90apps installed...Lemme attach some snapshots..
Hit the thanks button if I helped...and PM me for guidance..
Click to expand...
Click to collapse
hi there,
i tried to install clockwork recovery as well as tried to partition system partition through hd2 toolkit but i get the following error:
'Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
i hav disabled the checkbox of allo usb connection in window mobile device center.
i run everything using administrator. i use compatibility and administrator mode of xp sp2 in rapitool.exe and EnterBootloader.exe.but still getting the same error usb init failed 736
please help me..waiting for ur kind response,
thanks sameer.
Does it say USB on phone?
And what does it say in device manager on pc
Sent from my NexusHD2 using xda premium
shanman-2 said:
Does it say USB on phone?
And what does it say in device manager on pc
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
hi
i changed ports and tried running hd2 toolkit using run as a administrator to partition it worked..the rom is installed and rebooted but after it rebooted it went to magldr ..how do i set it up so that it boots the rom which is installed automatically? any idea
i hav installed using NativeSD (SD-EXT)..i just have 4gb sd card..is it advisable to run through it or i have to install to nand... i have htc hd2 1024 usa.
how to change from native sd to nand only any idea? want to know..!!
please enlight me.
thanks sameer
Can't remember, long time since I used magldr, dodgy USB port!!
Boot "ad nand" or something like that...
Sent from my NexusHD2 using xda premium
_sameer_ said:
i hav installed using NativeSD (SD-EXT)..i just have 4gb sd card..is it advisable to run through it or i have to install to nand... i have htc hd2 1024 usa.
Click to expand...
Click to collapse
in magldr set the sd card source folder to point to the /nativesd folder on the sd card, and set the default boot mode to ad sd. (yes, even though its booting from the ext partition, it finds the initial files in the folder on the sd fat32 partition).
hi
hi ,
thanks everyone for helping me with ur kind response and support. i would like to ask how do u install applications directly to sd than phone memory..any idea..is it possible?
is there any way to update the rom directly through rom in the phone or hav to download it from xda rom page?
'
hav a nice weekend.
thanks sameer
_sameer_ said:
hi ,
thanks everyone for helping me with ur kind response and support. i would like to ask how do u install applications directly to sd than phone memory..any idea..is it possible?
is there any way to update the rom directly through rom in the phone or hav to download it from xda rom page?
'
hav a nice weekend.
thanks sameer
Click to expand...
Click to collapse
You have to download the updates from the xda.
And regarding the applications, do u want to install them on the sd-ext partition?
hi
adil1508 said:
You have to download the updates from the xda.
And regarding the applications, do u want to install them on the sd-ext partition?
Click to expand...
Click to collapse
hi im running on nand..but i wanted to install apps directly to sd card..have no sd card partition..is it possible?
thanks sameer
_sameer_ said:
hi im running on nand..but i wanted to install apps directly to sd card..have no sd card partition..is it possible?
thanks sameer
Click to expand...
Click to collapse
I suppose u can move them manually to the sd-card, or select the directory for installation as the sd-card ( i think this is done in the play store settings, i dont really remember ). But why do you want to install apps in the sd-card?
I suggest u make an ext partition of your sd card. WARNING!: this will wipe ur sd card clean, make a backup!.
The advantage of making a ext partition is that when u use roms with A2SD support, the ext partition on ur SD CARD acts as internal memory. So u have sort of increased ur internal memory
Hi..
Im using this.. rom...
http://forum.xda-developers.com/showthread.php?t=2305456
sensors not working axis & orientation
both not working... any work around for this.. like patching.... driver ...
https://lh5.googleusercontent.com/-...80-h800-no/Screenshot_2013-09-04-13-13-53.png
https://lh4.googleusercontent.com/-...80-h800-no/Screenshot_2013-09-04-13-12-46.png
help me
thanks
Not noticed anyone else with this problem.
Have you tried another ROM? (use miui backup first)
If working on another rom then it is not your hardware at fault, it could be your partition size is too small. What is your install method, partition sizes, sd partition sizes and free space, phone type (eu or tmous), miui version, the more info you give, the better chance of a solution.
Robbie P said:
Not noticed anyone else with this problem.
Have you tried another ROM? (use miui backup first)
If working on another rom then it is not your hardware at fault, it could be your partition size is too small. What is your install method, partition sizes, sd partition sizes and free space, phone type (eu or tmous), miui version, the more info you give, the better chance of a solution.
Click to expand...
Click to collapse
my previous roms also .. miui.. its not working..
sd-ext partition 2 gb ..magdlr...install... me followed .. this.. guide
miui 3.8.30
here my screen shot.. of my mobile....
how to install manually...
those drivers..
thanks
please provide install method, nativesd, dataonext?
If dataonext, what is your system size?
When did you first notice these problems?
Info please.
BTW, the drivers should already be in the rom.
Robbie P said:
please provide install method, nativesd, dataonext?
If dataonext, what is your system size?
When did you first notice these problems?
Info please.
BTW, the drivers should already be in the rom.
Click to expand...
Click to collapse
magdlr...Nativesd, 16gb sd card in that 2 gb ext for native sd.
after installing 2.3.7 miui.. that time itself not working...
Now i ve upgraded with 4.1.2 miui.. now also its not working...
Have you tried enabling Auto-rotate in settings/complete settings/display?
If so, I can only think it is hardware.
You might want to install stock wm6.5 to see if it works on a different OS, take care if using tmous hd2 which radio comes with your wm6.5 rom.