Hi!
I have a HP 6915 since a few years ago, now, when I power on it only shows the HP logo and a "Local mode" message, if i plug it to USB port, this changes to "USB Mode".
The problem is that the official Spanish rom Update 1.50 from HP doesn't detect de device, and UNI_bootloader and other methods that I have view in XDA Forumdoesn't work for me.
Any sugestions? Other softwares? Would I try it on other OS as Windows XP?
Related
Hi guys,
I have a problem with my Qtek 2020 (HTC Himalaya) with Model PH10B. It was working well until i had to do a hard reset for making changes to enable clear type text. As i was a total newbie at this i took out the battery to reset it and placed it back in. The PDA never started again. One thing i did notice was that when i took the battery out and place the pda on a charger cable or usb cable, the red light starts emitting, but the pda still does not start. I was skimming through the forums for help and tried to enter the bootloader mode and works stating "Serial" (or "USB" when the USB cable was plugged in) and showing "V1.06" at the bottom by pressing Power + Joystick Center Button. This happens when the battery is connected to the pda.
I installed Microsoft ActiveSync 4.1 and downloaded a new ROM (Link: http://forum.xda-developers.com/viewtopic.php?=13588&start=0&postdays=0&postorder=asc&highlight= Genuine English WM2003 SE upgrade for Himalaya uploaded here). MS ActiveSync never recognised the device, but when plugged in USB, WinXP detected the device as "Microsoft USB Sync" under "Windows CE Devices" in device manager. For the first few times the flash program from HTC said that there was a country ID error, and after patching it with "xda2nbftool" i changed the operator ID to "Qtek" corresponding the brand name of the pda. Still the flash progress said "Country ID error", and after about 10 tries the program flashed successfully and indicated the congratulations screen on the computer. It said to perform a cold boot on the system by pressing the reset button at the bottom and the power button at the top, which i did and still the PDA does not work (but the Bootloader still does). Once i caught a glimpse of the new bootscreen of WM2003 SE with "Testing. Not for sale" but soon faded away.” Whenever I try to flash the PDA again, it always says the “Country ID” Error.
P.S. Originally the PDA was unlocked, and when it originally booted it said the QTEK clouds boot screen followed by the Vodafone (UK) logo. I also updated the driver of the "Microsoft USB Sync device" from the original XP one dated somewhere in 2000, to the new one bundled with ActiveSync 2.1 dated 2004.
Please help me as i am really desperate to make the PDA work.
Thanks.
Is this Rom okay to be flashed to it?
http://buzzdev.net/component/option,com_remository/Itemid,100/func,fileinfo/id,276/
Pocket PC 2005[/url]
I'm working with windows vista Ultimate en am running the new mobile device center, was working ok, till i flashed my MDA PRO/HTC UNIVERSAL.
Its now stuck in the bootloader, (v1.01)
When i try to connect with vista, it wil install drivers for pocket pc, en the MDA bootloader turns serial into USB, but thats it!!!!!
I tried to do a hard reset, en the MDA says "clearing now" and is still stuck on bootloader after all.
I also tried to do this--> http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen
Doesnt work either, because i cant select USB, only COM1 & COM2.
What do i have to do? i'm really desperate.
Please Help me!!!!
Dennis.
i tryed to change os language from italian to english and i put my hp6915 in bootloader mode by copying and executing EnterBl.exe from my device... hard reset says "clearing ok", but the device rests in bootloader mode... i need italian rom in order to reflash the damned thing... of course, a method to bypass language check from english hpruu would be better, but i'd be happy to restore sw... please i need a solution asap... thank you...
i have similar problem MY iPAQ hw6915 is now in bootloader mode i need some firmware to update i cant find anywere, somebody can help?
Hi,
There is a tool which should help! It worked for me. It's called UNI_ExitBootloader
(ftp://xda:[email protected]/Universal/Tools_and_Programs/uni_exitbootloader.zip)
1. download the tool
2. disconnect USB cable from your device
3. disable USB connection in ActiveSync
4. reconnect USB cable
5. wait some 30 seconds
6. run the tool
7. If successful, device will boot itself.
Pawel
this solution is only for UNIVERSAL, not for SABLE, DONT WORK
@pjurczy
thanx a lot your solutin work whit my hp hw6915
thanx thnax thanx
juliog said:
this solution is only for UNIVERSAL, not for SABLE, DONT WORK
Click to expand...
Click to collapse
today i try and 100% work
I'm glad it worked
Pawel
you are the best!!!
pjurczy said:
Hi,
There is a tool which should help! It worked for me. It's called UNI_ExitBootloader
(ftp://xda:[email protected]/Universal/Tools_and_Programs/uni_exitbootloader.zip)
1. download the tool
2. disconnect USB cable from your device
3. disable USB connection in ActiveSync
4. reconnect USB cable
5. wait some 30 seconds
6. run the tool
7. If successful, device will boot itself.
Pawel
Click to expand...
Click to collapse
Yuo are the best!!!
worked for me Thanks!!
Super duper!
Been having sleepless nights. Thanks a lot for your solution. Worked like a charm!
Dam not work with win7 64bit, you have another solution?
Doesn't work in vista or 7
How to disable ActiveSync?
When I connect my HP to PC it recognizes as "HP USB Sync".
I tried to disable that thing in Device Manager, but still getting error from "uni_exitbootloader" program (cannot open usb port... and so on)
What can I do? Please, urgently need advice!
P.S. I firstly tried to update it's rom to english, with sable ruu, got error something like "fail to initialize"; and then my hw6915 stuck in the bootloader screen. tried hard reset, but after "clear ok" it just got back to that HP screen.......
EDIT --> I have just found out that these all methods doesn't work with Windows Vista or Windows 7, so I'm going to get to my brother's computer with XP soon to try another time
So every time you do the flash rom will have to borrow your brother's computer ??
why do not you use WMDC 6.1 for Windows Vista that also supports and works in Windows 7 ??
try to check at http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=14
Hakim Rahman said:
So every time you do the flash rom will have to borrow your brother's computer ??
why do not you use WMDC 6.1 for Windows Vista that also supports and works in Windows 7 ??
Click to expand...
Click to collapse
This one for WM 6.1, what could i do with it? hw6915 is WM 5.1.
Another cool thing, that i have just flashed it with uk rom successfully, with xp.
btw, the computer with xp is half-mine not only brother's.
Hello everyone.
I recently got this 4 years old MDA 2 from a friend.
I thought i could still use it for Navigation and so i tried to update the Software to a newer Version - But somehow the update faild :-(
The only thing i see now on the screen is "Serial v1.02".
I already tried to switch into the Bootloader Menü for a Update via SD Card by pressing the Power+Navpad+Reset Switch, but it doesn't work.
Can someone help me please
bootloader
The device allready is in bootloader mode reconnect it to the pc and update the rom again then it will work again i use the aku 3.5 sp2 rom see the upgrading part in the forum
Good luck
Thanks, now my PPC is alive again.
Guess the Problem was with the new Vista Mobile Device Center.
I tried the same on a XP Computer with Active Sync 4.5 and it worked.
Hello Guys,
i am getting crazy witch my ipaq. I downloaded the newest firmware for my uk ipaq. I startet the HP RUU and everything was ok, till my notebook chrashed during the firwmware update....
So my ipaq only hangs on the start screen. What can i do ? I`ve read here in this forum that someone started the SDLoader and the RUU found the ipaq and startet an new update. But i dont get it work, i tried it several times, but my computer doesnt recognize the ipaq ?! (In the Device Manager there is no new usb device)
The Ipaq shows after the SDLoader started: Update Error! Pls Check!
What i doing wrong ? I am getting crazy with this thing !!! Please help, or please can someone give me a tutorial for a noob (i am not one, but now i think i am...) ?
Big THX
P.S.: Sorry for my bad english, i am a portuguese man...
You can check this:
- connect ipaq (running, no matter what error on the screen) to pc, run hp upd utility, try to update
- run SD loader, and the same way - connect to pc, run hp upd
- try hard reset (?)
I hope one of this helps. If no, I have on idea besides hp service.
Regards,
Darek
How i can run the bootloader mode ?
Is this the same as the SD Loader Mode ?
Big THX
I got my baby back, YEAH !
I only flashed the Windows from this Page
http://4pda.ru/forum/index.php?showtopic=79455&st=120
and then Windows-Screen showed up. So then i could install the new firmware again and now everything is ok.
So possible this can help anybody if he bricked his 614c !!
Bye