I'm working with windows vista Ultimate en am running the new mobile device center, was working ok, till i flashed my MDA PRO/HTC UNIVERSAL.
Its now stuck in the bootloader, (v1.01)
When i try to connect with vista, it wil install drivers for pocket pc, en the MDA bootloader turns serial into USB, but thats it!!!!!
I tried to do a hard reset, en the MDA says "clearing now" and is still stuck on bootloader after all.
I also tried to do this--> http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen
Doesnt work either, because i cant select USB, only COM1 & COM2.
What do i have to do? i'm really desperate.
Please Help me!!!!
Dennis.
Related
i tryed to change os language from italian to english and i put my hp6915 in bootloader mode by copying and executing EnterBl.exe from my device... hard reset says "clearing ok", but the device rests in bootloader mode... i need italian rom in order to reflash the damned thing... of course, a method to bypass language check from english hpruu would be better, but i'd be happy to restore sw... please i need a solution asap... thank you...
i have similar problem MY iPAQ hw6915 is now in bootloader mode i need some firmware to update i cant find anywere, somebody can help?
Hi,
There is a tool which should help! It worked for me. It's called UNI_ExitBootloader
(ftp://xda:[email protected]/Universal/Tools_and_Programs/uni_exitbootloader.zip)
1. download the tool
2. disconnect USB cable from your device
3. disable USB connection in ActiveSync
4. reconnect USB cable
5. wait some 30 seconds
6. run the tool
7. If successful, device will boot itself.
Pawel
this solution is only for UNIVERSAL, not for SABLE, DONT WORK
@pjurczy
thanx a lot your solutin work whit my hp hw6915
thanx thnax thanx
juliog said:
this solution is only for UNIVERSAL, not for SABLE, DONT WORK
Click to expand...
Click to collapse
today i try and 100% work
I'm glad it worked
Pawel
you are the best!!!
pjurczy said:
Hi,
There is a tool which should help! It worked for me. It's called UNI_ExitBootloader
(ftp://xda:[email protected]/Universal/Tools_and_Programs/uni_exitbootloader.zip)
1. download the tool
2. disconnect USB cable from your device
3. disable USB connection in ActiveSync
4. reconnect USB cable
5. wait some 30 seconds
6. run the tool
7. If successful, device will boot itself.
Pawel
Click to expand...
Click to collapse
Yuo are the best!!!
worked for me Thanks!!
Super duper!
Been having sleepless nights. Thanks a lot for your solution. Worked like a charm!
Dam not work with win7 64bit, you have another solution?
Doesn't work in vista or 7
How to disable ActiveSync?
When I connect my HP to PC it recognizes as "HP USB Sync".
I tried to disable that thing in Device Manager, but still getting error from "uni_exitbootloader" program (cannot open usb port... and so on)
What can I do? Please, urgently need advice!
P.S. I firstly tried to update it's rom to english, with sable ruu, got error something like "fail to initialize"; and then my hw6915 stuck in the bootloader screen. tried hard reset, but after "clear ok" it just got back to that HP screen.......
EDIT --> I have just found out that these all methods doesn't work with Windows Vista or Windows 7, so I'm going to get to my brother's computer with XP soon to try another time
So every time you do the flash rom will have to borrow your brother's computer ??
why do not you use WMDC 6.1 for Windows Vista that also supports and works in Windows 7 ??
try to check at http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=14
Hakim Rahman said:
So every time you do the flash rom will have to borrow your brother's computer ??
why do not you use WMDC 6.1 for Windows Vista that also supports and works in Windows 7 ??
Click to expand...
Click to collapse
This one for WM 6.1, what could i do with it? hw6915 is WM 5.1.
Another cool thing, that i have just flashed it with uk rom successfully, with xp.
btw, the computer with xp is half-mine not only brother's.
So got my Dopod 838pro running windows mobile 5 and will upgrade it to windows mobile6 with any luck, at the moment im trying to upgrade the boot loader to SPL (Bootloader) version 2.10.Olipro (HardSPL v7) and im following this very handy guide http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
however i get to the very end where its supposed to flash the new boot loader and it sits there for a while until the updater utility comes back with ERROR [260] Update Error.
Which informs me that i should check to see if the phone is connected to the computer via usb, which it is.
It must connect to the phone cause it actually starts the process of trying to update the boot loader, i see it on my phone. It goes to a red, green and blue screen. Which says:
Herm1000
IPL-SSPL by Des
Herm100
SPL-1.09.ds
USB
The only option i have here is to press exit on the updater utility, and start again.
Nothing else happends after this.
Im running Windows Vista 64bit, have also tryed this guide
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
Still no solution.
Currently i have:
IPL 1.01
SPL 1.06
Have also restarted my computer in between trying different things.
Anyone ever had this problem or know a fix?
Thanks in advance.
error 260 is an open port error. try a different usb port, disable antivirus and firewalls, or if avaiable try on a different pc, xp if possible.
heh, works on my XP machine.... >< Thanks.
Edit:
I tried a differeny USB port on my vista machine and that didnt work. I also closed absolutely everything and that didnt work either.
yesterday,i decided to flash my orange SPV M5000. I had the original WM5 on it. I made all preparations as needed,and i flashed it with a cooked WM 6.5 rom. It worked very nice the first couple of hours,then started going crazy,more and more. First windows,then the phone by itself. To describe better - i can not enter the bootloader anymore,when i press the required buttons to enter bootloader,it goes just off. It won't boot the WM at all anymore,it stands blocked at the first picture.the orange logo,and the red written lines:
R 0.00..00
G 42.37.P8
D 2.00.02 WWE
It stands like that. i can do a hard reset,but that doesn't change anything. The funniest thing is,when i press the required buttons for bootloader,the phone is off,the is nothing on screen,but i can start a rom upgrade program from the pc and it works. i can flash the device,again,but again,it stands blocked at the same spot. i did also now the bootloader upgrade to 1.01. Nothing accomplished. Please,any help for me now ?
Read wiki.
Try another 6.0 or 6.1 ROM.
I do that really and i try my best,understanding all that's written there,i tried many things,downloaded this MTTY,but it won't connect neither usb or any com port. I flashed another 6.o rom,crossbow,and the same thing is still happening. Exactly the same situation. It is stuck at the first screen and nothing is happening. Also no bootloader. Soon my head explodes,i can't understand what is going on No bootloader but still i can upgrade roms,which wont work,but again mtty no connection to do this DIC FORMAT or whatever
EDIT:
I forgot to mention, now whenever i do a hard reset,when it should write that line that i should press 0 for reset and x to exit the procedure - it says nothing - just a white screen,i still press 0 and it resets. Ending up stuck at the first orange screen
ok , let me ask you a few questions
1. Which operating system do you have (Xp or Vista)?
2. Have you disabled "allow usb connections" in Activesync?
3. Did you try to remove your SD and SIM card?
4. if you can't enter bootloader, is your PDA Recognized by your PC over Activesync or without activesync?
Ako ti treba detaljnija pomoc posalji mi msn adresu preko PM da ti pokušam objasniti
if you need detailed instructions, send me your msn (e-mail) adress over PM
damir-bosna said:
Ako ti treba detaljnija pomoc posalji mi msn adresu preko PM da ti pokušam objasniti
if you need detailed instructions, send me your msn (e-mail) adress over PM
Click to expand...
Click to collapse
Thank you my friend for your quick reply,i will soon write you in pm
wow same problem with me
my link: http://forum.xda-developers.com/showthread.php?t=529765
Few days ago my Wizard died all of a sudden. When turned on it only gets to the point when it shows "HTC smart mobility" and stays there. So not even to the screen with IPL, SPL. I tried soft/hard resetting, playing with battery but it was all no go, same.
I can get to the red-green-blue bootloader screen however, shows IPL 3.08, SPL 3.08. If i connect via USB cable to computer, bootloader screen shows "USB" on bottom. The ROM on the device was TNT's (not sure which version), Windows Mobile 6.1. It worked for ages without any problems with this ROM before this.
ActiveSync does not recognise Wizard at all, I cannot establish connection and therefore downgrade/upgrade the ROM becouse upgrade programs (for exmaple with ROM got originally with the device) say they cannot contact the device.
What are my options, please help.
hy
in my opinion , it is normal for active sync to not recognize your phone , because it's not turn on properly ,i mean it only recognize the phone when you enter windows mobile.
if i were you i would try to flash any rom i like and see if it works. i hope this helps
But ROM upgrade/downgrade program requires ActiveSync connection to run and I can't establish it...How to solve the situation, please advise?
when you are in bootloader screen and your phone is connected to the pc by usb cable just start the downgrade/upgrade program and it should work.
i did that. rom update utility complains that it cannot connect with mobile...
that was tried with:
1. official t-mobile ROM that was on the device when I got it
2. CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ROM
my IPL and SPL versions now are 3.08
sorry , i can't think of anything that might help you.
same problem
phones a brick.
I can get to the bootloader , i can even perform a succesful hard reset.
But it doesnt get recognized by the computer in bootloader mode. is there any way to flash the rom if the computer doesnt recognize the device?
regards
Try this look for nbd v8.1 or v8.3 .
hold the camera button and do a soft reset but keep holding the camera button until the 3 color screen comes up it should sync your phone then run the nbd rom or original cingular ship rom like this one ** RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1 ** i prefer original then other but that's me. Hope this help you.
Hello everyone!
I have one imate Jam that's showing USB v1.02 on lcd n it's doing nothing at all. Cant even connect it to pc or anything at all. tried to put it in boot mode but nothing happened.
Wat can be wrong? tell me procedure for fixing this!
Regards
Tom
Showing USB1.xx is the bootloader mode ! Maybe a damage switch ?
I would try to flash it .
Cotulla says : *Enter bootloader mode on device (Press POWER + CAMERA + RESET, you will see Serial/USB at top and 1.0X at bottom)
*Connect via USB to PC
*Run Update.exe
*Follow instructions in Update program.
*At the end you should see at device screen: "100% Upgrade OS Image Complete".
*After flashing press reset.
*Don't touch device, wait while "welcome screen" appear.
*Press screen, do calibration and start using device.
Good luck
Have the same problem, tried flashing but update program doesnt pick up the phone and then errors... Im using windows 7, could that be the problem?
Thanks for sharing info..
Can u tell me what rom to flash my imate jam with? I m new here don't know much about imate flashing. can u give me the link for the rom here please??
Regards,
*Connect via USB to PC
*Run Update.exe
*Follow instructions in Update program.
*At the end you should see at device screen: "100% Upgrade OS Image Complete".
*After flashing press reset.
*Don't touch device, wait while "welcome screen" appear.
*Press screen, do calibration and start using device.
Where to download rom from?? update.exe?? where to get that from?
wihandw said:
Have the same problem, tried flashing but update program doesnt pick up the phone and then errors... Im using windows 7, could that be the problem?
Click to expand...
Click to collapse
Fix it like here described, its in german but you will understand it.
The Magician must be in Bootloader mode for this procedur.
View attachment 298939
To be sure that your MAgician is o.k. flash a ROM from your Provider. Also you can get Cotullas WWE3.03 ROM from here http://cotulla.pp.ru/Magician3.html
Be sure that you have Radio 1.12 on your Magician ! ! ! !
cum instalez radio 1.12? cum imi dau seama ca este instalat. please help me