Hello all xda's members , It's my first post but I know a lot of things about this forum and about Motorola Defy ...
I've got something very strange , after a long time that I used Miui Rom ..
Suddenly , last week My Defy doesn't snow me if it's charging ( but still charge untill 97% ) and doesn't want to connect via USB . I've tried with 3 cables and nothing work .
Charging problem it's not too big because it's works , but no connect to USB .
And .. this is the strange thing :
I've connected to PC via USB in bootloader ( Power button + up volume ) and it seems to be allright .. BUT !! WITHOUT BATTERY !!! JUST PLUGGED TO USB PC !!! AND DON'T RECOGNIZE RSD LITE ( USB MASS STORAGE OR EVERYTHING !
And it snows that " Battery OK " .. What's wrong with my phone ?!
Please help me , I need a quickly answer Tell me if it's a hardware problems .. That's what I think
Thx all .
is this windows?
i have similar issues... windows doesn't detect my phone neither in mass storage nor bootloader... but USB debug is working... I can do adb...
however in Linux my phone works correctly... and I can also flash using sbf_flash in Linux...
seems to be driver issues for me...
It says MTP device driver not found...
Sent from my MB526 using xda premium
Yes , it's windows , but I replaced drivers and still not work .. I'm not sure if that's software problem .
It's normally if I pull out battery ( connected via USB ) and phone still work ?( without restart ) And if I pull in battery and disconnect from pc still work without restart ? ..
And charging problem : my phone doesn't snow me that it's charging .. only if I go to settings /system / Battery settings ( say it's discharging ) I see how increase energy level ..
What's wrong ? I've got this problem again a long time ago , it was drop from charge a few seconds , and didn't charge .
Maybe can be this problem because I used it underwater a few times . After that , I had lot of water inside , didn't want to charge and connect USB .. after I used a hair dryer and pull out water , everything works fine
Any reason ?!
Related
hi .. i have an atom life that dose'nt boot at all.. when you press power it flashes red light (only with the usb cable pluged).. but the strange thing is that i can flsh it throught mmc and open my phone whet it has plugged the usb cable... it boots slow but finaly it boots.. and works fine .. but when i unplug the usb imidiately shuts down
(sorry for my english)
i am searching for a solution long time now and i can't do anything... any suggestions ?
any help ?????
my defy is not being recognised by any of my laptop.
while i am successfully able to charge it from a wall socket.
not even in bootloader mood it is being able to detect any the defy using any of the available usb cord.
I am using the quarks gingerbread rom 11 11 11.
please help me as fast as possible.
and one more thing i have already tried to reset the cache.
will it be possible using bluetooth to be able to get back to froyo rom(so that i am able to send it to motorola service).
and also when the usb cord is inserted white lit glows up for a sec and will then switch off.
I am able to use my defy normally otherwise.
Seems like a physical problem with either your USB port or USB cable.
If you change the cable and it doesn't work - then it's the USB port in the phone, and you'll need to repair it.
Actually not it is not even booting it is stuck at m logo.
can i change the m logo(cyanogen) to normal motorola logo so that i can take it to motorola service centre(as it is still in warranty) by installing some zip.
i am able to access the 2nd init from it.
and more thing when i go to bootloader mode and connect the usb it says usb is connected.
Sainyam said:
and more thing when i go to bootloader mode and connect the usb it says usb is connected.
Click to expand...
Click to collapse
I've got the exact same problem, got anyone found a solution yet?
it say's it's connected but the pc don't recognize it. All Drivers installed a thousand of times on win 7 64 bit
thx
HB
the driver has some problems on win7 64bit.do you try it on xp?
Sent from my MB525 using xda premium
thx for the fast answer
not yet, just win 7 x86, i'll try to find someone with xp
Have u installed ur Motorola drivers on ur comp ? If no install them.. they help...
If it still doesn't work, right click on Rds>properties>compatibility>win xp. Try this too...
All the best!
Sent from my MB525 using XDA
I've got aprox the same problem , I can charge it ( but it says that IS DISCHARGING , nothing says me that is charging , only if I check battery level ) , but no connect via usb , no recognize RSD Lite , nothing .. More than that , If I plugin to wall charge or usb charge , my phone is working without battery , without restart .. any reason ?
Boot your phone into bootloader , flash your sbf go into stock recovery make a factory reset and reboot
Bootloader : vol. Up + power button
Sent from my MB526 using XDA App
bone101 said:
Boot your phone into bootloader , flash your sbf go into stock recovery make a factory reset and reboot
Bootloader : vol. Up + power button
Sent from my MB526 using XDA App
Click to expand...
Click to collapse
Doesn't recognize RSD Lite , how can I do that ? There's no data connection between pc and phone , just energy .
You boot into bootloader , you plug your phone onto pc with the newest driver and get no connection in rsd lite ?
Sent from my MB526 using XDA App
bone101 said:
You boot into bootloader , you plug your phone onto pc with the newest driver and get no connection in rsd lite ?
Sent from my MB526 using XDA App
Click to expand...
Click to collapse
Yes , absolute nothing I've reinstalled all drivers , but nothing .. It says on bootloader " Connect USB " and nothing happen if I plugin .
Anyone ? Please ? I Don't want to go service ..
you seems to have motherboard problem if your phone is in warranty claim it.
I was having the same issue, i gave my phone yesterday for motherboard replacement they asked me for 10 days so be ready for it.
i dont understand why so many people are getting this kinda error Dev please look into this problem.
i had to connect defy to one of my friends pc to charge my defy. wen i connect it a usb power issue pop up message came on pc, and defy restart itself. I suddenly remove usb from pc. But my defy not starting. Its loaded with WajkUI 2.4.20.
And wen i start defy, its showing the boot animation and screen turns off before get into the locked phone screen. So i wipe cache and dalvik cache(which i only know), i could get into the locked screen, but its not responding and screen went off after some seconds...
What do i do now?
ur friend pc not have motorola usb driver!
and ur phone not charged.
ur battery so low.
u must charge with charger ( no PC ).
jalal-jap said:
ur friend pc not have motorola usb driver!
and ur phone not charged.
ur battery so low.
u must charge with charger ( no PC ).
Click to expand...
Click to collapse
i know how to charge my mobile dude... it was an emergency... mobile charge was low... why do i need usb driver to charge defy with usb via pc...?
if u cant help pls dont troll me...
somebody out here might know the solution.... pls do assist me... thanks...
suppose he is not trolling you ;-), just trying to help
So have you charged your battery and tried again?
corrinti said:
suppose he is not trolling you ;-), just trying to help
So have you charged your battery and tried again?
Click to expand...
Click to collapse
tried with charged battery, but the locked phone screen appears and is not responding...
can i flash it again or just do a data wipe?
cant do above two cuz i havent done any backup.... can i take backup anyway? i just need contacts....
Yes, u can make a backup in CWM.
If the backup is build, flash a clean OS and restore the contacts with Appextractor or RomToolBox or whatever.
did a data wipe and now working fine... thanks...
Hello forum,
I am having a strange issue with my LG G2 (D802) , Software version D80220h , not rooted. One day iv plugged my phone to the PC and suddenly there was an error (Usb device not recognized), iv tried several things: using another usb cable , using another pc , installing the official LG USB drivers , hard reset on the phone , usb debbuging , switching pc connection modes (MTP , etc.) , nothing helped. Found some similar problems on the forum , but no solutions . The interesting thing is that when iv plugged my LG to the phone charge is saying that is slowly charging TA/USB , i`v tried another phone charger , but the same TA/USB slow charging message appear.
Thanks in advance and sorry for my English
Ruthlesspigeon said:
Hello forum,
I am having a strange issue with my LG G2 (D802) , Software version D80220h , not rooted. One day iv plugged my phone to the PC and suddenly there was an error (Usb device not recognized), iv tried several things: using another usb cable , using another pc , installing the official LG USB drivers , hard reset on the phone , usb debbuging , switching pc connection modes (MTP , etc.) , nothing helped. Found some similar problems on the forum , but no solutions . The interesting thing is that when iv plugged my LG to the phone charge is saying that is slowly charging TA/USB , i`v tried another phone charger , but the same TA/USB slow charging message appear.
Thanks in advance and sorry for my English
Click to expand...
Click to collapse
Its an issud of cable...
With poor quality cable this prob arise.
U original cable.
May be ur lg cable is bad..
Sent from my LG-D800 using XDA Free mobile app
The cable seems to be working fine , tried it with another phone and its working fine , tried a cable from another phone on my LG and nothing. I am starting to think that my USB port is defective
Ruthlesspigeon said:
The cable seems to be working fine , tried it with another phone and its working fine , tried a cable from another phone on my LG and nothing. I am starting to think that my USB port is defective
Click to expand...
Click to collapse
May be your usb port corroded..
Sent from my LG-D800 using XDA Free mobile app
hey,everybody .
this is my first post here , so please excuse my ignorance .
s4 att , android 4.2.2 , baseband i337UCUAMF3 , KERNEL 3.4.0-812098 , BUILD # JDQ39.I337UCUAMF3
When connected to pc , it starts charging , put pc does not see it .
tried 10 different usb cables ( including samsung original ) , tried dial *#0808# made sure it shows mtp+adb
tried 4 different computers from windows xp . up to windows 10 , kies does not see it , odin does not see it , pc does not see it .
i put it in download mode , no change .
updated windows media player , installed google sdk , nothing !
reset to factory , several times , did it from the phone menu , and from recovery , nothing !
i put 4.2.2 on a micro sd card , went into recovery , apply update from external i get error (error in tmp/sideload/package.zip status 7 )!!!!
does not connect via adb either !!!
PLEASE HELP !!!!
You did not mention the samsung kies, smart switch in your post. Usually I use those software to check whether my pc has samsung usb driver properly installed.
Hey, thanks for reply .
But I did mention kies, it does not see it.
Installed , uninstalled , and reinstalled the driver several times , still nothing.
mhk9626 said:
Hey, thanks for reply .
But I did mention kies, it does not see it.
Installed , uninstalled , and reinstalled the driver several times , still nothing.
Click to expand...
Click to collapse
It is hard to tell. It could also be assume that your usb port in the phone has a problem. Then again, you mentioned that when you plugged the phone in, it is charging.
I am sure you'd already ticked the usb debugging option in the developer mode.
Have you tried smart switch. When I upgrade my phone to lollipop kies does not detect my phone and asked me to use the smartswitch instead.
sway8966 said:
It is hard to tell. It could also be assume that your usb port in the phone has a problem. Then again, you mentioned that when you plugged the phone in, it is charging.
I am sure you'd already ticked the usb debugging option in the developer mode.
Have you tried smart switch. When I upgrade my phone to lollipop kies does not detect my phone and asked me to use the smartswitch instead.
Click to expand...
Click to collapse
tried smart switch too , nothing !!!
Sounds like the USB port of flex cable may be damaged.
audit13 said:
Sounds like the USB port of flex cable may be damaged.
Click to expand...
Click to collapse
you were the only one who tried to help . so , many thanks !!
No worries, we're here to help and learn from each other. Did you have an opportunity to try any other possible solutions? Do you have access to another flex cable?