Database Users

SGS caught in bootloop while flashing 2.3.6 from ICS Build 9

I have a problem unlike others, i m caught in a bootloop while flashing 2.3.6 from ICS Build 9 using odin, i had nothing better to do, serves me right, I can't go to recovery bcos my stupid ph is one of those that do not have the 3 button recovery.
After odin pass when i remove the usb it goes into installation but it says:
E: copy_dbdata_media:can't mount/dbdata. your storage not prepared.Please use menu for format and rebot actions.(I dun ve that option)
E:failed to mount/dbdata file exist
deleting file failed
updating failed
cache wipe failed
Applying multi csc. Installing multicsc
Can't access
Successfully applied multi csc
But the on reboot it goes into Samsung and bootanimation over n over
Any help appreciated Thanks!!
I ve also tried flashing other stock roms but the it does not reboot instead showing the connection between ph and pc sign. Thanks again

I thought everyone checked if 3 button recovery was working before taking a walk in the dark valley of flashaholics.
Tapatalked - There's a Thanks button somewhere

Why didn't you flash something to enable the 3 button recovery before flashing anything else? Flashing without the 3 button recovery is just asking for a huge headache and even a brick. Now you may have to resort to making/buying a USB JIG to get into download mode.

ndmuni said:
I have a problem unlike others, i m caught in a bootloop while flashing 2.3.6 from ICS Build 9 using odin, i had nothing better to do, serves me right, I can't go to recovery bcos my stupid ph is one of those that do not have the 3 button recovery.
After odin pass when i remove the usb it goes into installation but it says:
E: copy_dbdata_media:can't mount/dbdata. your storage not prepared.Please use menu for format and rebot actions.(I dun ve that option)
E:failed to mount/dbdata file exist
deleting file failed
updating failed
cache wipe failed
Applying multi csc. Installing multicsc
Can't access
Successfully applied multi csc
But the on reboot it goes into Samsung and bootanimation over n over
Any help appreciated Thanks!!
I ve also tried flashing other stock roms but the it does not reboot instead showing the connection between ph and pc sign. Thanks again
Click to expand...
Click to collapse
You need a 3 files ODIN rom , and before flashing make so you have PIT and repartitions , your problem is a minor problem ( because you don't repart the partitions, that's why it's bootlooping

adslee said:
Why didn't you flash something to enable the 3 button recovery before flashing anything else? Flashing without the 3 button recovery is just asking for a huge headache and even a brick. Now you may have to resort to making/buying a USB JIG to get into download mode.
Click to expand...
Click to collapse
After kies update i was able to go into download mode so that was why i was'nt too worried, my mistake was deleting the file of build 9 in the internal sd b4 i flashed the .6 otherwise when odin finished my phone was in recovery mode i could ve just install zip fr sd again. The problem that the state my ph is in i could not get anything into the sd not even fr pc. Only chance is tru odin, i suppose now i ve to look for firmware that i flash with repartition to wipe the files and data fr internal sd maybe that might do it.

ndmuni said:
After kies update i was able to go into download mode so that was why i was'nt too worried, my mistake was deleting the file of build 9 in the internal sd b4 i flashed the .6 otherwise when odin finished my phone was in recovery mode i could ve just install zip fr sd again. The problem that the state my ph is in i could not get anything into the sd not even fr pc. Only chance is tru odin, i suppose now i ve to look for firmware that i flash with repartition to wipe the files and data fr internal sd maybe that might do it.
Click to expand...
Click to collapse
Ah ok, I thought you couldn't get into download mode, but it's always good to have recovery mode since I always found CWM pretty important

Mawdo said:
You need a 3 files ODIN rom , and before flashing make so you have PIT and repartitions , your problem is a minor problem ( because you don't repart the partitions, that's why it's bootlooping
Click to expand...
Click to collapse
This is exactly what i m doing now, downloading couple but i m not too sure cos i ve not use odin on 3 files, fr what i read its just putting the pit file in pit and tar file in pda what is the other? if i extract n c than i'll kn if what i downloaded has 3 files.

ndmuni said:
This is exactly what i m doing now, downloading couple but i m not too sure cos i ve not use odin on 3 files, fr what i read its just putting the pit file in pit and tar file in pda what is the other? if i extract n c than i'll kn if what i downloaded has 3 files.
Click to expand...
Click to collapse
When I messed my partition, I had to use ODIN. You will need four files:
1. PIT file
2. PDA
3. CSC
4. PHONE

ndmuni said:
This is exactly what i m doing now, downloading couple but i m not too sure cos i ve not use odin on 3 files, fr what i read its just putting the pit file in pit and tar file in pda what is the other? if i extract n c than i'll kn if what i downloaded has 3 files.
Click to expand...
Click to collapse
Pit file goes to PIT, CODE file goes to PDA, MODEM file goes to PHONE, and CSC goes to CSC, and make sure Re-partition is checked

Thanks to Ramad for his stockfirmware download and all you for yr assists, my SGS is up and running, going to bed now will be rooting it when i wake up Cheers!!!!

How to change ROM

Hi,
I have a basic ROM in my SG and I used this procedure to root the device using the superclick.
Now I have super user but when I go to recovery mode (with the volume+home+power) I dont have the option apply zip from sd card, I only have an option update zip from sd card which is not working. I want to put cynagone rom in my device, how do I do it ? I understood that you have to go to recovery mode and go to appl from SD card but I just dont have this option...what can I do ? I do have the ZIP file for the ROM.
Thanks

First i would do it with Odin. Its the safiest way.
You choose a root kernel and add it in "pda". After that, click on "start" without pit file and repartition.
Then you phone restarts and you can switch in cwm. You will see then all points^^.
Kill all kies process while flashing kernel
here you search your kernel:
http://forum.xda-developers.com/showpost.php?p=15188469&postcount=9

Replay
Thanks, but how do I know which ones are working with kernel 2.2 ? My galaxy's hardware is 2.2 and beside that I want to put the jealy bean and not CF... Can you give me instructions on how to put the Jealy bean from that start ? I found a lot of procedures but non that compatible with 2.2 or that can explain how to do it. I have a guide for 2.3+..can I use it ?
"http://snappybytes.blogspot.co.il/2012/03/how-to-flash-sgs-and-install-custom-rom.html"
Thanks
RoachPapa said:
First i would do it with Odin. Its the safiest way.
You choose a root kernel and add it in "pda". After that, click on "start" without pit file and repartition.
Then you phone restarts and you can switch in cwm. You will see then all points^^.
Kill all kies process while flashing kernel
here you search your kernel:
http://forum.xda-developers.com/showpost.php?p=15188469&postcount=9
Click to expand...
Click to collapse

Read
http://forum.xda-developers.com/showthread.php?p=30415128

Solved
I think it is solved after reading the last mentioned post. If not please let us know.

Galaxy S3 i9300 Unbrick [restore to stock rom] [noobs][easy]

Hi guys! This is a noob-proof guide on how to flash stock samsung firmware on your i9300. Whether you have bricked it or just want the stock firmware back. Here's how to do it (detailed explaination)
WARNING! : This is only for the GT i9300 (international version) , Check your device before proceeding. Also you might lose all your data. So backup! i am not responsible if you brick your phone(although very unlikely) by not following the guide properly
Also you will lose your custom recovery, Custom ROM and will not longer have root
Ok lets begin!
1. Make sure you have the samsung drivers installed on your pc (http://bit.ly/SDaIIE)
2. Your device should have at least 80% battery left
3. Enable USB Debugging by going to Settings>Developer Options>Tick the Usb debugging tick box!
Files needed :
1. Android 4.1.2 I9300XXEMC3 for Galaxy S3 I9300 - http://www.hotfile.com/dl/202240205/4dcf384/I9300XXEMC3_I9300NEEEMC1_NEE.zip.html
2. Odin 3.07 - http://bit.ly/16aRzF4
Extract The firmware Zip file until you get a file with a .tar extension and some other files. Do not extract furthur
Extract odin zip file till you get Odin3 v3.07.exe
Now here comes the actual flashing part
1. Power off your smartphone. Wait 5-6 seconds for vibration to confirm complete switch off.
2. Now, get into Download Mode by pressing and holding Volume Down, Home and Power button simultaneously until Samsung Galaxy logo appears in phone screen. Wait few seconds and your phone will be in download mode.
3.Open odin as administrator and connect your s3 to your computer with usb cable
4. You will get a message "Added" in the message box in odin and You should also see COM port with a number in Yellow if you successfully added your device.
if you don't get this , try another usb port.. if it still doesn't come , reinstall drivers.
5. Select these files from I9300XXEMC3 folder in Odin at respective buttons:
Click the PDA Button, and select the .tar.md5 file here with *code* appearing in its name
Click the Phone Button, and select file with *modem* in its name (leave if there is no such file)
Click the CSC Button, and select file with *csc* in its name (leave if there is no such file)
Click the PIT Button, and select the .pit file. Use only if you got it while extracting , otherwise ignore it.
6. make sure Auto Reboot and F. Reset Time checkboxes are selected. Also, make sure that Re-Partition checkbox is selected, only if you are using a .pit file
7. Double check everything above and hit start!
8. once flashing is complete the phone will reboot automatically and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can then unplug the USB cable to disconnect your device from computer.
After completing these steps, Make sure to wipe the cache and do a factory reset in clockworkmod recovery if you do happen to find yourself in a bootloop (phone rebooting continuously) Or just do it anyways to prevent a bootloop from occurring.
congrats! , you have just restored your i9300!
If this has helped you make sure to hit the thanks button!

should be in General

We already have this exact same topic posted .
jje

Deleted OS
Please Help me this is important i had Galaxy s3 cyanogen mod 10.1 and i wanted to get back to stoke firmware i get to CWM and i did this:
wiped cash
wiped divlyk
format system
format data
actually i format the phone to Zero i tried to flash stoke firmware with odin but it's not installing it get to NAND Write Start!!
and stop please help me !!!!

Great simple procedure.. it seems as I never tried... I entered Android world recently..
Just wanted to know few things..
I bought S3 with ICS. upgraded to 4.1.2 but I feels some lagging after upgrade.
So questions are :
1. Can I get back to ICS without voiding my warranty?
2. Can I use this method to install 4.1.2 which may have no lagging issues.?
Help much appreciated..!
Thank you in advance..!

Thread Moved to General.

Bad_boy46 said:
Please Help me this is important i had Galaxy s3 cyanogen mod 10.1 and i wanted to get back to stoke firmware i get to CWM and i did this:
wiped cash
wiped divlyk
format system
format data
actually i format the phone to Zero i tried to flash stoke firmware with odin but it's not installing it get to NAND Write Start!!
and stop please help me !!!!
Click to expand...
Click to collapse
Make sure you don't attach the USB cable into a hub.
Sent from Hell thanks to Android
---------- Post added at 01:41 PM ---------- Previous post was at 01:39 PM ----------
amit3880 said:
Great simple procedure.. it seems as I never tried... I entered Android world recently..
Just wanted to know few things..
I bought S3 with ICS. upgraded to 4.1.2 but I feels some lagging after upgrade.
So questions are :
1. Can I get back to ICS without voiding my warranty?
2. Can I use this method to install 4.1.2 which may have no lagging issues.?
Help much appreciated..!
Thank you in advance..!
Click to expand...
Click to collapse
Yes and no... You must reformat partitions and upload an ICS bootloader. Not for the regular user i'm afraid
Sent from Hell thanks to Android

amit3880 said:
Great simple procedure.. it seems as I never tried... I entered Android world recently..
Just wanted to know few things..
I bought S3 with ICS. upgraded to 4.1.2 but I feels some lagging after upgrade.
So questions are :
1. Can I get back to ICS without voiding my warranty?
2. Can I use this method to install 4.1.2 which may have no lagging issues.?
Help much appreciated..!
Thank you in advance..!
Click to expand...
Click to collapse
Yup you can use this method to restore to ICS...
Download ICS Firmware - Click here
Now flash this firmware...
Hit Thanks if i helped

Bad_boy46 said:
Please Help me this is important i had Galaxy s3 cyanogen mod 10.1 and i wanted to get back to stoke firmware i get to CWM and i did this:
wiped cash
wiped divlyk
format system
format data
actually i format the phone to Zero i tried to flash stoke firmware with odin but it's not installing it get to NAND Write Start!!
and stop please help me !!!!
Click to expand...
Click to collapse
This normally happens when the partitions on the embedded multi media card gets corrupted for whatever reason, also known as the emmc.
The phone can be revived by flashing a pit file to repartition the emmc in order so it can be written to.
Download and unzip this file and you will have a .pit file which you put in the tab marked PIT in Odin
GT-I9300_mx_20120220.pit = Galaxy S3 of 16 Gb
GT-I9300_mx_20120322.pit = Galaxy S3 of 32 Gb
GT-I9300_mx_20120329.pit = Galaxy S3 of 64 Gb
(Just google the one that you need and download it)
Next make sure > r partition, f /reset, and auto reboot are ticked in options in Odin.
Next put the stock rom in the tab marked PDA, if flashing a custom rom then flash a rooted kernel first in PDA together with the pit file, hit start and start the flashing process, afterwards this will also give you the option of flashing the rom from recovery, next, flash the custom rom from Odin or from recovery
When finished the phone should reboot and start up.
Hit the thanks button if i helped

TechMasta said:
This normally happens when the partitions on the embedded multi media card gets corrupted for whatever reason, also known as the emmc.
The phone can be revived by flashing a pit file to repartition the emmc in order so it can be written to.
Download and unzip this file and you will have a .pit file which you put in the tab marked PIT in Odin
GT-I9300_mx_20120220.pit = Galaxy S3 of 16 Gb
GT-I9300_mx_20120322.pit = Galaxy S3 of 32 Gb
GT-I9300_mx_20120329.pit = Galaxy S3 of 64 Gb
(Just google the one that you need and download it)
Next make sure > r partition, f /reset, and auto reboot are ticked in options in Odin.
Next put the stock rom in the tab marked PDA, if flashing a custom rom then flash a rooted kernel first in PDA together with the pit file, hit start and start the flashing process, afterwards this will also give you the option of flashing the rom from recovery, next, flash the custom rom from Odin or from recovery
When finished the phone should reboot and start up.
Hit the thanks button if i helped
Click to expand...
Click to collapse
Thanks my friend But it still have the same problem It's get to NAND Write Start!!! and on my s3 the blue line in download mod freeze i still can get to CWM i tried to install cyanogen mod rom Zip file but it's not booting please any Other ideas

Enabling USB debugging is completely useless and a waste of time

Bad_boy46 said:
Thanks my friend But it still have the same problem It's get to NAND Write Start!!! and on my s3 the blue line in download mod freeze i still can get to CWM i tried to install cyanogen mod rom Zip file but it's not booting please any Other ideas
Click to expand...
Click to collapse
Try Re-partitioning your phone.. Put the .pit file in the repartition section , Tick that re-partition checkbox in odin and hit start.. after re-partition try to flash the .tar file again :good:
Hit thanks if i helped

TechMasta said:
Yup you can use this method to restore to ICS...
Download ICS Firmware - Click here[/URL]
Now flash this firmware...
Hit Thanks if i helped
Click to expand...
Click to collapse
Thanks for replying!
Last question.. does flashing the stock ICS firmware voids my warranty??

Thx

If it is an official ROM package, it shouldn't trigger yellow triangle.
Even in that case, you can use Triangle Away app from Chainfire and see how it comes to zero
Sent from Hell thanks to Android

Glebun said:
Enabling USB debugging is completely useless and a waste of time
Click to expand...
Click to collapse
EXACTLY, Ho coulld you do that when you have a bricked phone.

it doesn't matter if you can do it - it's as useless as changing the wallpaper before flashing

TechMasta said:
Try Re-partitioning your phone.. Put the .pit file in the repartition section , Tick that re-partition checkbox in odin and hit start.. after re-partition try to flash the .tar file again :good:
Hit thanks if i helped
Click to expand...
Click to collapse
i did flash the GT-I9300_mx_20120220.pit file but same problem but when i flash it the CWM goes from the phone so i tried to flash the cf-root file but it stop at NAND write start!!! so i flashed the mx.pit file and after that i tried to flash the cf-root file and i managed to flash it and my custom binary Counter Increases but when i try for the firmware it get stuck in NAND write start!!! (im GONE crazy)

guys please i need help where are the developers ?!

I don't know much of what you two talked about because i am a noob too. You should make a topic about it man!

[SOLVED] My Samsung Galaxy Y GT-S5360 won't start

Hello everybody
My friend has a Samsung Galaxy Y GT-S5360 and since yesterday it won't start. It shows "Samsung Galaxy Y young" and doesn't start. So I decided to try to root it and install Jellyblast v3 but it's the same problem. I followed a tutorial and tried to wipe cache and data but still the same problem. So now I read that the people who had the same problem as me, resolved their problem by flashing the stock rom with odin. But I saw that we needed some information like PDA, PHONE and CSC but I can't have these informations as the phone won't start So I am going to follow a tutorial to flash it with odin. But I'm worried about bricking definitely her phone :s So I want to know if there is no risk to brick her phone if I try to flash a stock rom without knowing these information (PDA PHONE CSC).
Thanks for your help and sorry for my bad english °° !!

please look in my signature for easy flashguide,there is all info you need.its very newby friendly and believe me thats no problem,you just stuck on boot,its not so bad and easy to solve,you only need a uauable brain an eyes.i know u can do it.good luck

-CALIBAN666- said:
please look in my signature for easy flashguide,there is all info you need.its very newby friendly and believe me thats no problem,you just stuck on boot,its not so bad and easy to solve,you only need a uauable brain an eyes.i know u can do it.good luck
Click to expand...
Click to collapse
Thanks for your answer
I downloaded a package and indeed there are 3 files into the zip. But these file are PDA / CSC / MODEM and in your guide you mention a PHONE file, is that the MODEM file ?
EDIT: Sorry I found my answer ^^"

Maws59 said:
Thanks for your answer
I downloaded a package and indeed there are 3 files into the zip. But these file are PDA / CSC / MODEM and in your guide you mention a PHONE file, is that the MODEM file ?
EDIT: Sorry I found my answer ^^"
Click to expand...
Click to collapse
Don't say thanks buddy,,,,there is a thanks button already ,just press it to appriciate OP for the usefull post..:thumbup:
:thumbup: DON'T FORGET TO PRESS THANKS BUTTON IF I HAVE A BIT SUCCESS TO HELP YOU :thumbup:

Hello
We managed to install a package but there are no french language in the one we installed. But we have these information now:
PDA: S5360DXKJ3
PHONE: S5360DXKJ1
CSC : S5360OLBKJ2
Could you tell me which package we must install to have the french language please ?
Thanks a lot for your help !!
EDIT : If you saw my last edit I did a mistake when telling informations x)
EDIT : Problem solved : http://forum.xda-developers.com/picture.php?albumid=8046&pictureid=28987

problem persists
TECHNO_THUNDER said:
Don't say thanks buddy,,,,there is a thanks button already ,just press it to appriciate OP for the usefull post..:thumbup:
:thumbup: DON'T FORGET TO PRESS THANKS BUTTON IF I HAVE A BIT SUCCESS TO HELP YOU :thumbup:
Click to expand...
Click to collapse
odin doesnt show a yellow bar while i connect my device in download mode. what to do??
odin id not detecting my device

aditya22u said:
odin doesnt show a yellow bar while i connect my device in download mode. what to do??
odin id not detecting my device
Click to expand...
Click to collapse
try install sgy drivers http://forum.xda-developers.com/showthread.php?t=2327476 .

aditya22u said:
odin doesnt show a yellow bar while i connect my device in download mode. what to do??
odin id not detecting my device
Click to expand...
Click to collapse
You should install SGY driver first

gts5360
my phone is not starting after install cwm just showing samsung logo
help me i tryed to connect odin but not connect

heart428 said:
my phone is not starting after install cwm just showing samsung logo
help me i tryed to connect odin but not connect
Click to expand...
Click to collapse
you installed cwm how?
there is only to types of cwm for galaxy y
1 - tempory cwm zip - flashed in stock recovery to give you cwm - this zip must be flashed each time you enter recovery to bring up cwm
2 - perminant cwm - this is included in a custom kernel and replaces stock kernel and stock recovery with a custom kernel and recovery
if you flashed a kernel state which one it was
to use odin
download odin 3.07
download and install samsung usb drivers
put phone in download mode by pressing vol down home button power button until download screen appears
connect phone to pc via usb cable
press vol up to begin connection
wait for drivers to install
open odin
on the left hand side it should say under com:id com then a number in a coloured box if connected
then put
pda in pda
modem in phone
csc in csc
then start

Samsung Galaxy wont Start and cant acces the System recovery
Hi ! my Samsung Galaxy y young GT-s5360 wont start after my friend tried to Upgrade it,
After i've tried to open my phone, its Stuck on the Logo "Samsung Galaxy Y young GT-S5360"
i've tried to wait of almost 10 minutes but my phone still Freeze,I've also tried to Access the Samsung Sytem recovery but it wont appear on my Screen
pls. Help me

pls. Help me
Click to expand...
Click to collapse
u phone got brick. please read previous post. u problem can be solved by use Odin.

You can flash stock rom without odin..but you need CWM

shyamSGY said:
You can flash stock rom without odin..but you need CWM
Click to expand...
Click to collapse
no you cant flash stock "firmware" without odin
if you flash a so called stock firmware via cwm all you are doing is flashing a custom rom with no modifications - slight technically difference

marcussmith2626 said:
no you cant flash stock "firmware" without odin
if you flash a so called stock firmware via cwm all you are doing is flashing a custom rom with no modifications - slight technically difference
Click to expand...
Click to collapse
By keeping a Nandroid backup in sdcard and restoring with Cwm..
I have ddle1 backup

shyamSGY said:
By keeping a Nandroid backup in sdcard and restoring with Cwm..
I have ddle1 backup
Click to expand...
Click to collapse
wouldnt work though if you changed your file system to ext to use cm7/9/cyanmobile/pa
you can only restore a nandroid backup fully if you restore it on the kernel on which it was made and you are on the same file system as it was made although you can advanced restore if on different kernel and should work if it can verify md5 sum

hemmm
marcussmith2626 said:
you installed cwm how?
there is only to types of cwm for galaxy y
1 - tempory cwm zip - flashed in stock recovery to give you cwm - this zip must be flashed each time you enter recovery to bring up cwm
2 - perminant cwm - this is included in a custom kernel and replaces stock kernel and stock recovery with a custom kernel and recovery
if you flashed a kernel state which one it was
to use odin
download odin 3.07
download and install samsung usb drivers
put phone in download mode by pressing vol down home button power button until download screen appears
connect phone to pc via usb cable
press vol up to begin connection
wait for drivers to install
open odin
on the left hand side it should say under com:id com then a number in a coloured box if connected
then put
pda in pda
modem in phone
csc in csc
then start
Click to expand...
Click to collapse
what i should put at those pda,phone and csc ? sorry, i'm newbie

IsyrafSan said:
what i should put at those pda,phone and csc ? sorry, i'm newbie
Click to expand...
Click to collapse
Don't understand the question sorry
Like I said - download the firmware from my firmware thread & follow all the instructions
Pda goes in pda
Modem goes in phone
CSC goes in csc
Please follow all instructions on my firmware thread - links in signature

N910H damaged ext4 help plz ?

hi to all !
first sorry for my bad english
i need help to save the note 4 N910H of my littl brother
i don't know what my brother did exactly with the phone. but now the phone stop working ,it show just the logo sumsung and reboot to recovery . the phone was rooted and with recovery cwm v6.0.5.1 philz touch6.58.9.
now the only thing that work is recovry and download mode .
i search in the forum the way to solve the problem and i try many thing without succed
i try to flash with stock rom with odin and i try many other i always have the " THERE IS NO PIT PARTITION"
i try with the PIT file .
i try with many usb cable.
itry to format with cwm i have "E:error mounting/data !" but for other its ok (boot ,system,cache ...)
i try to flash some custom rom using cwm it start flashing but after few i have "e: error" and "e:damaged ext4" "uknow volume ext/path".
so plz help :crying:

Sounds like you device's internal memory's MBR maybe corrupted and needs to be reformatted completely before you can flash a ROM back onto it. I don't know how to do so I would recommend you do allot of research online or ask members here for help before attempting this yourself.

DarkGuyver said:
Sounds like you device's internal memory's MBR maybe corrupted and needs to be reformatted completely before you can flash a ROM back onto it. I don't know how to do so I would recommend you do allot of research online or ask members here for help before attempting this yourself.
Click to expand...
Click to collapse
thx !
yes im still searching.
the terminal command work in the phone so i can try to format but im not good with the linux command .
i try with Mke2fs but i don't know the name of the partition ?

plz any one can upload or share Stock BACKUP of N910h to restore with cwm
and thx in advance

Samy6699 said:
plz any one can upload or share Stock BACKUP of N910h to restore with cwm
and thx in advance
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/note-4/development/rom-5-1-n910h-t3187818

cloud911 said:
try this
http://forum.xda-developers.com/note-4/development/rom-5-1-n910h-t3187818
Click to expand...
Click to collapse
thank you so much !
it ll work with cwm ?? i ll give try

Samy6699 said:
thank you so much !
it ll work with cwm ?? i ll give try
Click to expand...
Click to collapse
use TWRP 2.8.7.0

cloud911 said:
use TWRP 2.8.7.0
Click to expand...
Click to collapse
I can't flash the twrp i have the same error as when i flash rom

Samy6699 said:
hi to all !
first sorry for my bad english
i need help to save the note 4 N910H of my littl brother
i don't know what my brother did exactly with the phone. but now the phone stop working ,it show just the logo sumsung and reboot to recovery . the phone was rooted and with recovery cwm v6.0.5.1 philz touch6.58.9.
now the only thing that work is recovry and download mode .
i search in the forum the way to solve the problem and i try many thing without succed
i try to flash with stock rom with odin and i try many other i always have the " THERE IS NO PIT PARTITION"
i try with the PIT file .
i try with many usb cable.
itry to format with cwm i have "E:error mounting/data !" but for other its ok (boot ,system,cache ...)
i try to flash some custom rom using cwm it start flashing but after few i have "e: error" and "e:damaged ext4" "uknow volume ext/path".
so plz help :crying:
Click to expand...
Click to collapse
Flash with the pit file for your device and repartition. But use the right pit. See the pit on sammobile forum