Sorry If I' writing a thread on the same topic but
I have an ACER S200 I made a Clean Boot and now , beause my screen doesn't work well anymore, the align is endless.
I try with welcolme.not txt file, in SD card and in the memory of the phone but doesn0t work aNd when booting, it demands that I must align my screen.
This continues whatever I do.
Help mee
You may have to try and get at this registry key:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
and set the MaxCalError Value to 10, 20 or some value higher than what it is set at, then soft reset the machine.
Not easy when the machine itself won't start. You will have to get at it remotely via activesync etc.
Visual Studio contains a remote registry editor, which will install and invoke the client code on the machine, but there are also a few freeware versions around.
Try to connect with the fantastic (and discontinued) EveryWan RemoteSupport Personal Edition: http://www.mediafire.com/?qur4suif6aodtbn
It installs without uncertified-message to confirm as it is signed and has a lot of useful options. Best I came across in all the years
Related
Hi folks
As anyone at all managed to get ozVGA or something like working on the M5000. Ive tried but cant access the screen at all after the reset and then end up having to do a hard reset and start again from scratch. It wont even let me access the files via the USB cable.
Any help very much appreciated as I've reconfigured the entire device to try OzVGa and even SEVGA (doesnt work at all) to no avail.
Or is there settings I just save before rebooting. Please tell me how you did it.
Thanks in advance
Same problem
Hi guys,
I've got exactly the same problem. I wonder if it's to do with the Orange customisation....
It locks up if you use a password to first access the device, immediately when you press the first digit on the keypad. If you remove the password from your device, then it launches the window in proper VGA mode, but again, locks up, needing a hard reset.
I dont care about having true VGA for this device all the time, just for my web browser will do.... :roll:
Alwyn
Same just would like a real size on web browsing (WTF why didnt they fix that.. doh)
I dont have password on.. (as still am testing but it just locks up completely until a hard reset.
Read this thread here: http://forum.xda-developers.com/viewtopic.php?t=32217
Did... read. copied.. machine died.. did it work for you?
exactly what i did:- and didnt work
1. Soft reset your Universal first to clear any locks
2. Unzip the entire archive onto your PC into a single directory
3. Copy ALL of the files into your PocketPC's Windows directory
4. Run the SdkCerts.cab included in the files.
5. Create a shortcut to the ozVGA.exe file within your Windows Directory and place into Start Menu
6. Startup ozVGA and click the lower lefthand button
7. Your device will restart in your new resolution!
I think that I had similiar problems until I did a soft reset after step 4, before starting ozVGA the first time. Now it's working for me (MDA-Pro, latest Jasjar ROM).
I'm nopt really sure it the soft reset was the solution, but anyway it's worth a try.
Wolfgang
Woot!! worked. reset inbetween worked... thanks
works first time on my m5000, and i am still learning this machine can do so much!! saving for a bigger SD card and ill be on my way
What is ozVGA??
can someone tell me?
OZVGA is anyone still using this?
Before I stuff up my machine again I'd like to know if it's worth it. Or if not, are there any bettet alternatives, I only really need a proper screen for IE.
I tried OzVGA and had the same problem and had to do a hard reset, at which point I found the thread here recommending a different program (attached) which worked perfectly for me. If you want to go back, just uninstall it. If you keep the cab file, you can switch back and forth as needed. It even lists in the readme the exact changes it does, which made me feel better.
VGA seems worth it to me - so much more can be fit on the screen, and I couldn't switch back now. Internet Explorer also looks great in VGA, along with everything else. No more needing to scroll all the time in things is very nice, at least for me.
I haven't found a way to get Internet Explorer to run properly in QVGA like it does in VGA mode (it insists on doubling the images). However, if it's just for the internet you want, you could try Opera which handles VGA better, and will give you the Internet Explorer in VGA mode experience in QVGA mode without needing to switch.
Hope this helps, just wanted to add my (limited) experience and recommendation for the application in the linked post
Hi guys,
Hope this hasn't been asked before too many times. I did do a search but couldn't find anything.
I've just written a small app for ppc (works on 2002, 2003 and WM5) to act as a countdown timer. However, unless I set my Wizard to never shutdown, it turns off whilst the timer is still going.
I've had a look through the latest SDK's (I'm using Visual Studio 2005 and the latest version of the Compact .NET Framework) but can't figure out how to stop this.
The only way I can think of is to find the reg key that controls this (I assume there is one), copy it, set it to a rediculous or null value and then copy it back again on shutdown. But it seems like a god awful solution and prone to any number of errors where it doesn't get copied back.
Is there a simple ".NET" way to do this?
BTW Although I've been a developer for [cough] years, I've never written anything for PPC before.
Cheers,
Bassey
Hi
take a closer look at HKLM\System\CurrentControlSet\Control\Power. There you will find system and user idle timeouts. To prevent a PocketPC WindowsMobile system from going to sleep, you must reset the System idle timer periodically. This is done by a call to
void WINAPI SystemIdleTimerReset (void);
I think this will be the same for WinCe 3.0 up to WinCe5
If you think about a good programming starter book, I recommend Douglas Boling 'Programming Microsoft Windows CE .NET' (3rd edition). It talks about nearly everything. It is my favourite book.
regards
Josef
Thank you very much indeed. Have just ordered the book as well.
Cheers,
Bassey
Has anyone got TodayPlus http://www.pocketpcfreeware.com/en/index.php?soft=843
up an running on the wizard. It is/was the best todayscreen plugin on my old Ipaq. I can get it to run as a stand alone app. but not to integrate as a plugin.
Al
Hmm.. I reviving this threat after 'discovering' something called 'TodayPlus'. I did a google to it and it seems to be a very powerful program. From the looks of it, it seems to have the potential to cover both PocketBreeze and PocketPlus.. and yet it seems to be not often being discussed here. It seems to be able to do everything, by scripting (feels to be like the PPC version of Samurize.com)
I'm bound to give it a go this weekend.
Those who are interested, take a look at this MASSIVE forum just for this today plugin/application.
http://forums.jhollin1138.com/
French version http://www.todayplus.fr.tc/
You may able to download the software from the link above (post by `wizzzard`).
Note that, there are a lot of software named TodayPlus, which includes a Palm based software that tries to emulate PPC Today. So, it is rather confusing to do a google for it. Anyway, the 'head' of TodayPlus seems to be at this site
http://www.dark-mojo.com/
But it seems to be currently down.. interesting...
i got it working
http://forum.xda-developers.com/viewtopic.php?p=360201#360201
but i couldn't get it to update weather, rss,radar
attaching the program
Todayplus is/was the best plugin I found. It worked perfectly on my WM2003 Ipaq2210 and works on my WM5 Wizard. It was designed for WM2003 and does not support landscape correctly. There is no support available from the author but remains for me the most adaptable today screen plugin.
Don't work for me...
I got only a blank screen. Any suggestion?
Ciao
blank screen
i have given edited dll also in that archive.
Skip the steps for editing it and you have to follow these steps
phuntum (05-27-2005) - v0.11.0
On your PPC use a file explorer that will allow you to see extensions and hidden files to find the file “todayplus.dll” in \Program Files\TodayPlus and copy it to your PC. On your PPC turn off the TodayPlus plugin (uncheck in the Settings/Today screen), soft reset, and move “todayplus.dll” from \Program Files\TodayPlus to \My Documents. On your PC use a hexeditor to open the “todayplus.dll” and search for “7D 1E A0 E3 03 08 A0 E1”; replace “7D” with “8D”; save the edited “todayplus .dll” and copy it back to \Program Files\TodayPlus on your PPC. Delete” todayplus.dll” from \My Documents and reset your PPC. On your PPC turn on the TodayPlus plugin (check in the Settings/Today screen) and soft reset.
phuntum (05-28-2005) - v0.11.0
The above fix is permanent. Save the new todayplus.dll in a safe place so that if you have to reinstall (e.g., after a hard reset) all you need do is install, disable, and replace as per above. You might want to save the instructions just in case. Free hexeditors are abundantly available. Do a web search for one. It's a great program and the effort is worth it. When you're ready, surf over to http://www.jhollin1138.com for a goldmine of help. There is a great debate as to whether the fix should be shared--somewhat hypocritical in my estimation, since those who were lucky enough to get it before it disappeared are using it.
these are the directions from ppcfreewares i followed
after doing this go to this thread http://forums.jhollin1138.com/viewtopic.php?t=1292
and start with no 6 in instructions
good luck
I still need to reinstall this plugin after upgrading my ROM.
There are loads of diferent skins available my favourite is attached.
The Dark Mojo forum closed ages ago but discussions particularly on the "Hammerskin" skin are ongoing on http://forums.jhollin1138.com/
Hammerskin is awesome but it was too much of a resource hog last time I tried it.
Sorry for the double post
updates?
did u get weather and rss updated?
I have tried it twice on my Kjam. Used the modified dll provided. however, I can only see a white screen when trying to access the settings! :S Does anybody know what I am doing wrong? Thanks
Ok, I found it! I was missing the .net!
Very nice application with beautifull skins! Only drawback is that it does not auto refresh when you add a new apointment or task!
Apart from that its a really nice application!
Arrgghh,
Reinstalled on my Wizard after upgrading to Molski's ROM. I can get it working as a plugin rather than as a stand alone program, which previously was my stumbling block. Now I can't get the config utility to remember my location or get weather and rss feeds updated. This did work on my old ROM. I think it is just some reg settings that need creating but why it worked before and not now I do not know.
Hi Guys,
Im a newbie to this plugin but so far I understand that its able to make short cuts on the "desktop" just like a normal pc....and thats what Im looking for.
Ive followed the instructions carefully and the first time it went okay....i.e I got the slider.txt in the skin box. However I didnt find the "okay" button on the top.
Well I followed the instructions but it didnt show up on my desktop....strange so I uninstalled.
Now Ive been reading a bit further and read that the reason why it might not have workd could be the date so I decided to set back the clock 2 years and reinstall it.
2nd time around I dont get the slider.txt option, it has saved my settings from my first install....and it still doesnt work.
help help help
Well after som struggle I managed to get the slider.txt into the "Select Skin (DLL)"
But its still not working on my today screen. I can choose it as the only item on the today screen however its just blank.
Is this because I use a special black screen (tsk file) for my back ground ?
Also its seems to forget my location (Lat/Long)
Any help so that I can get it working ??
Im using a Qtek 9100 with WM 5 OS 5.1.195 Build 14847.2.0.0
Oh I'm happy again
I finally got Todayplus running properly again. Weather and RSS are updating correctly.
This is what I did.
1 install Todayplus cab
2 Disable Todayplus from Settings/Today/items
3 Soft reset. Or power cycle the phone.
4 Overwrite todayplus.dll with the modded one
5 create directory \program files\todayplus\Buffer
6 Connect to internet and verify connection with PIE, minimise
7 Run todayplus config
6 Tab to Weather/RSS add new weather cities and rss feeds
7 Tab to Time/Storage add new timezone and set storage path to \Storage Card (case sensitive and device specific for Wizard?
8 Close Todayplus config
The config utility would not save my location coordinates on the owner info tab so I manually entered the values into HKCU\Software\SRSSoft\TodayPlus\coords\1 (string value of the form 53.483,-2.053) You can get your city coords from http://www.heavens-above.com/
9 Disable all other today screen plugins and enable todayplus. Close the settings program.
On returning to the today screen after a short wait Todayplus should be working. This worked for me but there is loads of information at http://forums.jhollin1138.com/viewtopic.php?t=1292 if you need further help.
Hi guys, I have a small problem, I have a Xda exe, and bought Route 66's Navigator 7 to run on my unit, problem is this when I try to install the cab file (which is sucessful) it fires up: Error one or more required files cannot be found. please reinstall the application. (close window). I have searched the net and this form for answers/solutions but can't seem to find any. When I was on other sites abt wm5 and set up problems I noticed that there is certain things you cannot get access to on the wm5/O2 software. ie, Like tring to set up a blue tooth connection, what you get with o2 is their attempt of a coms software rather than keeping it simple like windows based interface that everyone else has.
Is there anyway you can stop the o2 customisation cab running after a hard reset, as I think o2 are deleteing files that are required to run route 66. Also is there a way to have just wm5 installed the way you would get windows xp out of the box the way microsoft designed it without o2, or T-mobile mucking it up? :!: :?
Oh and by the way Microsoft as released the Beta of ActiveSync 4.2, which cleared up a lot of my connection problems if anyones interested in the link for it come back to me..
I believe that if you hard reset, go through the touchscreen set up and copy/paste tutorial, when it comes to the 'Tap the screen to finish setup' (ie - when all the guff is installed) if you then soft reset it stops the CAB file from installing and you're left with WM5 as Bill Gate$ intended it (Should point out that i've never tried it though, so it may be completely wrong!) Hope this helps
Oink1....Thanks for the reply on that, I will try that next time round and let you know. cheers
Hello,
Today I found my old broken (digitizer not working) touch HD sleeping in a dusty box... and I kind of felt sad for it.
All the hardware on the phone is working just fine except for the touch pannel
So I was thinking, is it possible to make some good use of it without investing any money for repair (it's just not worth it, as I have the brilliant HD2 since the day it got realeased)?
Having a non-working digitizer doesn't leave a lot of options but here is an idea:
Car tracking device? - have it installed in my car, constantly charging from the car battery, listening to GPS and sending coordinates over gsm data to my PC/server.
1. The blackstone have a GPS and you can install a simple data only SIM card from your provider, allowing your device to connect to a remote server over the internet and send important data - like gps coordinates.
2. It's still possible to install any custom rom you like.
3. There is a way to skip initial touch calibration screen: make an empty text file and rename it to "welcome.not" and place it in the root ot your sd card. (Thanks to Chef_Tony for pointing that out!)
4. There is a way to control the device via PC and a USB cable: after hard reset your device default usb connection mode will be ActiveSync. Then run the free MyMobiler application on the PC and it will automatically install on the usb connected device, allowing you to fully control it via your PC mouse and keyboard. (Thanks to Chef_Tony for pointing that out!)
I'm sure that I'm not the first nor the only one that came up with an idea like this, but I couldn't find any topic on it. I also know there are many brilliant developers in XDA that make loads of awesome apps for our HTC devices.
So, any ideas?
Shouts to:
Chef_Tony
Best wishes,
Xeno
new digitizer is about $8.. buy it, fix it at home and sell it for $100
yes, you can always replace the digitizer and have a fine phone.
but anyways, since your plan seems pretty interesting, here is some basic input to help you:
3. you can bypass the OOBE. all you need to do is, create an empty txt file on your pc, "untitled.txt" and rename it to "Welcome.not", (yes, change the extension to "not") and put it in the root of the sd card, then the welcome wizard should be skipped after a hard reset, and so you don't need to align the screen.
4. after a hard reset, the default option for a usb connection is activesync. then you can run MyMobiler on your pc, it will install on the device automatically and you can control the device on your pc's screen with keyboard and mouse.
so you can still use it for anything you like, if you control it over the pc and preconfigure it to meet your needs.
sleby said:
new digitizer is about $8.. buy it, fix it at home and sell it for $100
Click to expand...
Click to collapse
I gave it a shot few months ago and I failed The problem was that the digitizer is literally glued to the lcd panel, and detaching it is a REAL pain the butt (I almost broke it). Anyway, after reassembly the new touch screen didn't work and I gave up. I cursed myself later on when I found the topic here in XDA forums that the best way is to buy a digitizer+lcd combo...
Chef_Tony said:
yes, you can always replace the digitizer and have a fine phone.
but anyways, since your plan seems pretty interesting, here is some basic input to help you:
3. you can bypass the OOBE. all you need to do is, create an empty txt file on your pc, "untitled.txt" and rename it to "Welcome.not", (yes, change the extension to "not") and put it in the root of the sd card, then the welcome wizard should be skipped after a hard reset, and so you don't need to align the screen.
4. after a hard reset, the default option for a usb connection is activesync. then you can run MyMobiler on your pc, it will install on the device automatically and you can control the device on your pc's screen with keyboard and mouse.
so you can still use it for anything you like, if you control it over the pc and preconfigure it to meet your needs.
Click to expand...
Click to collapse
Thank you fine sir for the light on the topic. I'll make sure to add this in the first post
Every new idea/info will be of great value reaching the goals of this thread
Ok, putting a welcome.not file on the root of the sd card did the trick as promised. I conneced the device to my PC via usb and as expected it connected via ActiveSync by default.
Unfortunatelly MyMobiler was unable to install the mobile part of the app automatically - it poped a message on the phone "This program is from an unknown publisher..." and it's now waiting for confirmation to continue the execution of the app... and it's pretty impossible to confirm this with a broken touch pannel
I believe there is a registry workaround for this, but it should be set by default in a cooked rom? I'm using the latest WWE rom from HTC.com.
It will be great if some good chef could mod this rom and make this annoying message go away
1. i just had an idea on how to get mymobiler running. i cannot promise, that it'll work, but it certainly doesn't hurt.
having the latest mymobiler on your pc, you see different files there, some of which are named:
remote.exe
remote.exe.40
remote.exe.50
when you connect the device in activesync mode, and set it up for syncing (at least notes or browser favorites, something that does not actually mess with your pim data), you will see the blackstone in "My Computer". entering it, you have the storage home drive and the storage card. by enabling "Show hidden files" and disabling "Hide system files" in your windows explorer, you should be able to access the windows folder of the device. then you can copy the file remote.exe.50 there, rename it to remote.exe (the .40 file is for wm2003, the .50 file for wm5 or greater, but you need to remove the extension to make it executable).
and then, since you cannot make shortcuts yet, copy the file again to \Windows\StartUp\
thereby making it run automaticly, when the device boots. then soft reset, and i am fairly certain, you should be able to run mymobiler.
from there on, you could disable the signature warning for future programs.
EDIT: apparently, the startup folder is victim to the certification warning as well. still i leave this paragraph, as i find it interesting as to how mymobiler works.
2. another idea would be to just flash any cooked rom found here on the forum. all of them have this stupid signature warning disabled and are ready to run mymobiler out of the box.
3. my third idea to get it running is trying to modify the responsible reg key:
\HKEY_LOCAL_MACHINE\\Security\Policies\Policies\0000101a
it is a dword key, where the value '0' is activated warning, and '1' means, the warning is disabled.
in the 2577.zip in the attachment, you will find a reg key, that changes this value and also a cab file to do the same thing.
on a device with an ARM cpu, the folder 2577\ on the storage card will be monitored for autorun.exe and execute it, when the card is inserted. i also packed 3 different autorun.exe files in there, one by me, one by navigon, and one by igo, hoping at least one of them would work with a proper certificate. what you'd need to do, is extract it, and copy it to the storage card, so the path is \Storage Card\2577\Autorun.exe
autorun classic works with the CFG.txt, which is also included and changed to work, as long as your rom is WWE and the storage card is actually named \Storage Card\, if not, edit the path.
until now, i was unable to run it, because the autorun.exe files aren't signed with a trusted certificate either, but i'll give other people time to post ideas, and rethink the thing, maybe i can make it work for you.
still i think, if you are gonna use the device for a few little features, you are not required to use the stock rom, so flashing another rom, which then does not have the certification warning would be the easiest way to go for everyone involved.
Connect it to your PC and use it as a monitoring tool!
Can come handy when benchmarking.
http://forum.xda-developers.com/showthread.php?t=695298