Database Users

[Q] Can't Upgrade Radio

My setup is this:
Sapphire PVT 32A ENG S-OFF H
HBOOT-1.76.2007 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Right now I'm using [ROM][6.35] CM7.1.0 (30/09/2011) Android 2.3.7, but I wanted to change it to [ROM][6.35] SFM Sense UI 2.3.3 v.1.2, for that I must change radios, but when I try to do that it stucks at about 95% completion when installing, I tried with Radio_HTC_PVT_32A_6.35.10.18 and 6.35.16.19.
How do I upgrade the radio?

Man, do you really have this combination hboot 1.76.2007 with radio 3.22.20.17???
Can you make a photo with it? I'm very surprising.
About your trouble - you can flash radio in fastboot-mode via fastboot.exe utility
fastboot flash radio.img (not zip! )
Sent from my A7-040 using Tapatalk

It's true, but now I can't access neither fastboot nor recovery menu, I tried to install this RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver in order to update the radio, but it also got stuck at 95% radio and 36% general, so I had to uplugged it, it bricked, but with fastboot oem boot i can launch CM7, so the phone resumes operation normally, I can access ROM Manager, but not Recovery meny or fastboot menu. Any suggestions?

thins gone bad to worse, i've manage to install rom1.zip file from the the RUU_Sapphire_Rogers_WWE_3.05.631.7_R_release_signed_NoDriver.exe, but now I'm on a constant loop reboot, I can't get past teh Rogers logo, I' have access to the bootloader and fastboot, but on the fastboot I can't do almost anything, I can't flash anything, I don't have access to the recovery menu. Is there a factory wipe that I can use? Help is desperatly needed, my bootloader info is this:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAPP10000)
CPLD-12
Radio-3.22.20.17

I can only install ROM1.zip from these 3 RUUs:
RUU_Sapphire_Rogers_3.54.631.3_release_signed_NoDriver
3.05.151.3 Vodafone Greece/Portugal test-signed
RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver
and in all cases the phone goes in constant reboot, I tried to replace the files in the rom and rom1 with different recovery e hboot, but in all cases it gives me this error:
12 signature verify fail
Anyone can help me? I can't update my radio, it's allways stuck on:
INFO[RUU]WP, RADIO,97
no matter what radio I use, I can't change it. Should I try to change a radio img file with HEX editor?

Do you have access to fastboot-mode (back + power)?
Hboot-mode (volumedown + power)?
Remove battery first and place it back to power off device if it is bootlooping
Sent from my A7-040 using Tapatalk

Yes, I have access to those two, but not to the recovery menu

My current fastboot info:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
Radio-3.22.20.17

Such a big forum and nobody can help me?

JoeFagundes said:
Yes, I have access to those two, but not to the recovery menu
Click to expand...
Click to collapse
Try this...
Download custom recovery 1.7.0 H (for 32A) and place it to sdcard
http://forum.xda-developers.com/showthread.php?t=530492
Go into fastboot-mode and run this recovery (you can rename to recovery.img)
Code:
fastboot boot /sdcard/recovery.img
If it done you can flash hboot 1.33.2010 S-OFF from recovery
http://forum.xda-developers.com/showthread.php?t=529019
If it done you will get right combination hboot 1.33.2010 / radio 3.22.20.17 and S-OFF
Then you can flash custom recovery (and custom ROMs for old radio)) or upgrade to hboot 1.76.2007 S-OFF / radio 6.35.XX.XX (and custom ROMs for new radio)

Thanks, but it's too late, I sent the phone to vodaphone, it's still under warranty

JoeFagundes said:
Thanks, but it's too late, I sent the phone to vodaphone, it's still under warranty
Click to expand...
Click to collapse
You chose right decision, cause it was only attempt to help.
Remember, Magic 32A must be in combination:
hboot 1.33.XXXX / radio 3.22.XX.XX
or hboot 1.76.XXXX / radio 6.35.XX.XX
They need to be updated together

I know that, the problem is that I couldn't change the radio, no matter what radio I tried, it always happened this, it didn't go past 97:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

JoeFagundes said:
I know that, the problem is that I couldn't change the radio, no matter what radio I tried, it always happened this, it didn't go past 97:
Click to expand...
Click to collapse
Yes. I read about same problem already.
http://forum.xda-developers.com/showthread.php?t=692101
p.s. Chances were when you had S-OFF.

Thanks, it was an interesting read, he had the exact same problem that I had.

I need a Help for my magic 32b !

hi my phone is htc magic 32 b i have atach two photos, for my information
i have follow this tuto :
CLShortFuse for making super easy Rooting method. Original topic.
SuperOneClickv2.3.3 .... and it says that my phone was done successfully root
and next step i have follow this tuto:
http://forum.xda-developers.com/showthread.php?t=529019
but when i do this:
fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img
i have this result :
C:\Android>fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img
sending 'recovery' (4520 KB)... FAILED (remote: not allow)
finished. total time: 0.001s
and now pls can someone help me wich tuto must follow to install custum rom or what to do
thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Not development topic!
Anyway, it's better to upgrade your phone to newest combo
Scenario:
1. in fastboot-mode (like at first screen) run
Code:
fastboot getvar cid
fastboot getvar cidnum
You will get your regional customerid (CID)
2. According CID choose appropriate RUU from library in section "Vodafone Magic / Sapphire 32B: http://forum.xda-developers.com/showthread.php?t=659403
3. Run it. Now you have build number CRC24 (Android 1.5), after RUU you will have build number DRC92 (Android 1.6), but it is not enough.
4. Then you need apply two update files to get hboot 1.33.0013 / radio 2.22.28.25 (VODAFONE OTA UPDATE from DRC92 to FRG83D)
This combo is most used combo for Magic 32B now. You will have Android 2.2 too.
5. At this step you need get root again (cause it will disappear while installing official roms). Run SuperOneClick
6. Even on Android 2.2 you can not run "fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img", cause hboot 1.33.0013 does not allow it too like hboot 1.33.0007
In this case you need follow steps 5, 7, 9 (only these) from manual: http://forum.xda-developers.com/showpost.php?p=7707672&postcount=1
p.s. Sure, you can do step 6 instead to get custom recovery, but your current combo (hboot/radio) is not used in custom roms. So you have to change it in future. It's better to change them first following all steps in this post.

thank you so much now i have 2.2.1 5[Strogino]

[Firmware] HTC ONE M7 | Firmware 5.11.661.8 | No Red Text | Radio 4T.27.3218.14

This is the latest firmware for HTC ONE M7 extracted from official OTA for TELUS, 5.11.661.8
You need unlocked bootloader and S-OFF
I removed Red Warning Text and flashed successfully on my phone.
This build is for
development purposes only
Do not distribute outside of HTC
without HTC's written permission.
Failure to comply may
lead to legal action.
The zip contain:
- firmware 5.11.661.8
- hboot 1.57.0000
- radio 4T.27.3218.14
- the new splash screen "powered by android"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download file and copy to your adb folder:
A - full firmware link removed
MD5 be417a18c76ef0e517f32266e4b5d744
B - hboot only link removed
MD5 4b74f5f8c47bdd6aa2fc20446e5ce743
DON'T REBOOT THE PHONE UNTIL YOU GET A SUCCESS MESSAGE​
1 - Reboot bootloader
Code:
adb reboot-bootloader
2 - Reboot to RUU
Code:
fastboot oem rebootRUU
3 - Flash firmware
Code:
fastboot flash zip firmware_5.11.661.8_noredwarn.zip
Very important!!! One more time
Code:
fastboot flash zip firmware_5.11.661.8_noredwarn.zip
3b - Flash hboot only, if you want
Code:
fastboot flash zip hboot_1.57_no-red-warning.zip
4 - Reboot to bootloader and verify version
Code:
fastboot reboot-bootloader
5 - Reboot to system
Code:
fastboot reboot
6 - Enjoy
WARNING
Flash at your own risk, I can't be held responsible if you brick the phone!!!​

If case you need original firmware for modelid: PN0712000 cidnum: TELUS001
The zip contain:
- firmware 5.11.661.8
- hboot 1.57.0000
- radio 4T.27.3218.14
- the new splash screen "powered by android"
- stock boot
- stock recovery
link removed
MD5 895F3ADD2CCC1DE09F85910DCFE94B99

If flashed successfully please post your modelid and cid here.
Thanks

Flashed succsessfully on PN0710000 with super cid...:good:

I'm looking for the Telus M7 firmware for sense 6 - why were the links removed in this thread?
Sent from my HTC One using Tapatalk

Can you help me? Bricked my phone!
So I did something pretty dumb yesterday. Installed the HTC Sense 6 update on my HTC ONE M7, hated it so decided to root my phone to revert back to Sense 5.0 or 5.5 or potentially try a custom ROM. Downloaded a Tmobile 4.3 JB RUU, downloaded android SDK, HTC sync manager, Fastboot. I unlocked boot loader, installed Wheaton recovery by Koush, installed SU, figured phone was rooted but it wasn't. Now I've somehow succeeded in deleting EVERYTHING. Phone continues booting into recovery. Commands using Fastboot aren't recognized because it cannot find any device. When plugged in via USB, PC recognizes that something is plugged in but that's about it.
M7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4T.27.3218.14
Open DSP-v32.120.274.0909
OS-5.14.531.1
eMMC-boot 2048MB
May 9 2014, 15:00:26.0
HBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
CHECK SMARTSD
IMAGE CRC
SHOW BARCODE
Any help will be greatly appreciated

rodenti said:
I'm looking for the Telus M7 firmware for sense 6 - why were the links removed in this thread?
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Some issues with corrupted zip files.
Download from here
http://forum.xda-developers.com/showthread.php?t=2485651
bonedatt said:
So I did something pretty dumb yesterday. Installed the HTC Sense 6 update on my HTC ONE M7, hated it so decided to root my phone to revert back to Sense 5.0 or 5.5 or potentially try a custom ROM. Downloaded a Tmobile 4.3 JB RUU, downloaded android SDK, HTC sync manager, Fastboot. I unlocked boot loader, installed Wheaton recovery by Koush, installed SU, figured phone was rooted but it wasn't. Now I've somehow succeeded in deleting EVERYTHING. Phone continues booting into recovery. Commands using Fastboot aren't recognized because it cannot find any device. When plugged in via USB, PC recognizes that something is plugged in but that's about it.
M7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4T.27.3218.14
Open DSP-v32.120.274.0909
OS-5.14.531.1
eMMC-boot 2048MB
May 9 2014, 15:00:26.0
HBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
CHECK SMARTSD
IMAGE CRC
SHOW BARCODE
Any help will be greatly appreciated
Click to expand...
Click to collapse
Post questions in Q&A section please

Thread closed at OP's request.

Fastboot Flash Error - Preflash Validation Failed, Please Help

Hi Everyone,
I'm using a Moto X Pure Edition XT1575 32GB running MM 6.0 stock with Feb 1, 2016 security update with unlocked bootloader.
I wanted to flash the MM 6.0 factory images released by Motorola to revert my phone to complete stock and lock the bootloader again.
When I flash, I'm getting the following error
(bootloader) Preflash validation failed
FAILED (remote failure)
Please help... I have also attached a screenshot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Why did you fastboot oem lock begin before flashing system images? That wasn't in the list of instructions that came with the file...
mxpe 6.0

Same thing happened to me and I didn't even use the fastboot oem lock.

If the February update changed the partition then it will fail. It also happens when you try to downgrade from 6.0 to 5.1.1. If that's the case, then you just ignore it and flash the other files.
Edit: I just checked in the update zip. It updates the partition so it can't be downgraded. Just ignore that and flash the other files.

Thanks. I'm actually in the progress of downloading the files straight from Motorola so I know for sure they are legit.

Thanks everyone, I will follow the instructions and flash others.

joeldroid said:
Thanks everyone, I will follow the instructions and flash others.
Click to expand...
Click to collapse
Let me know how it goes. I'm actually gonna go back to stock just to see if it works for future use. I just received my moto x pure yesterday. I don't think the stock rom is up to date like the files from the Motorola website.

got the same issue nothing seems to work. Any ideas ?

bskbeast said:
got the same issue nothing seems to work. Any ideas ?
Click to expand...
Click to collapse
There are a dozen threads here about flashing stock images... all of them talk about pre-flash validation errors... Maybe one my signature will help?

acejavelin said:
There are a dozen threads here about flashing stock images... all of them talk about pre-flash validation errors... Maybe one my signature will help?
Click to expand...
Click to collapse
i have tried several. When i get home i will look for yours.
Thanks

FAILED (remote: Command not allowed)

So I'm trying to root my huawei p9 lite vns-l31 but had no luck
I did ulock bootloader and i do get the message when i reboot
but why i try to boot into the twrp from fastboot i get FAILED (remote: Command not allowed)
also the thing when you press the power button and vol up it will jsut reboot it
I tried many TWRP files none woked also I have android 7.0 and emui 5.0
P.S. sorry for bad english

Unlock bootloader again with ADB command:
"Fastboot oem unlock YOUR_CODE"
Reboot and flash a good version of TWRP for you.
Done!

Therand said:
Unlock bootloader again with ADB command:
"Fastboot oem unlock YOUR_CODE"
Reboot and flash a good version of TWRP for you.
Done!
Click to expand...
Click to collapse
Not working for me aswell

chakalovski2 said:
Not working for me aswell
Click to expand...
Click to collapse
What's not work?
ADB command?
Or fastboot?
What's return of command?
Error text?
What did you make on your phone?
How do you want help without explaining your problem?..

Hello,
When I try to send a command as flashing through fastboot it's telling me command not allowed it's kind of impossible to write or send data like a flash to my phone. Though the drivers are installed and adb too.

help me pls Command Not Allowed
I have bootloader code but when I write the command fastboot oem unlock ******* I get the command not allowed error 210 stock rom is not loaded with the three key method I want to install a twrp in vendor, system, product invalid argument error how to fixed pls help me (sorry my bad english) i can not open the oem lock because i do not know how to use the usb debug mode
Elite Rom 5.1 (Hassan Mirza) came to me after I uploaded it and I could not fix it again
TEL: P9 LİTE VNS-L31
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Please help me
did you fixed that error
Failed (Remote: Command not allowed)
If yes How?
Because i am also in same problem...:crying::crying::crying:

Revert to stock OS, then go to Developer settings and enable OEM unlock.
Then repeat hte process.

How can I get the stock OS without TWRP? I tryed dload method, but theres is allways a problem when eRecovery tries to install the update.zip... Idon't know what to do.. My bluetooth is not working, that my problem