[Q] Can't Upgrade Radio - myTouch 3G, Magic General

My setup is this:
Sapphire PVT 32A ENG S-OFF H
HBOOT-1.76.2007 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Right now I'm using [ROM][6.35] CM7.1.0 (30/09/2011) Android 2.3.7, but I wanted to change it to [ROM][6.35] SFM Sense UI 2.3.3 v.1.2, for that I must change radios, but when I try to do that it stucks at about 95% completion when installing, I tried with Radio_HTC_PVT_32A_6.35.10.18 and 6.35.16.19.
How do I upgrade the radio?

Man, do you really have this combination hboot 1.76.2007 with radio 3.22.20.17???
Can you make a photo with it? I'm very surprising.
About your trouble - you can flash radio in fastboot-mode via fastboot.exe utility
fastboot flash radio.img (not zip! )
Sent from my A7-040 using Tapatalk

It's true, but now I can't access neither fastboot nor recovery menu, I tried to install this RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver in order to update the radio, but it also got stuck at 95% radio and 36% general, so I had to uplugged it, it bricked, but with fastboot oem boot i can launch CM7, so the phone resumes operation normally, I can access ROM Manager, but not Recovery meny or fastboot menu. Any suggestions?

thins gone bad to worse, i've manage to install rom1.zip file from the the RUU_Sapphire_Rogers_WWE_3.05.631.7_R_release_signed_NoDriver.exe, but now I'm on a constant loop reboot, I can't get past teh Rogers logo, I' have access to the bootloader and fastboot, but on the fastboot I can't do almost anything, I can't flash anything, I don't have access to the recovery menu. Is there a factory wipe that I can use? Help is desperatly needed, my bootloader info is this:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAPP10000)
CPLD-12
Radio-3.22.20.17

I can only install ROM1.zip from these 3 RUUs:
RUU_Sapphire_Rogers_3.54.631.3_release_signed_NoDriver
3.05.151.3 Vodafone Greece/Portugal test-signed
RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver
and in all cases the phone goes in constant reboot, I tried to replace the files in the rom and rom1 with different recovery e hboot, but in all cases it gives me this error:
12 signature verify fail
Anyone can help me? I can't update my radio, it's allways stuck on:
INFO[RUU]WP, RADIO,97
no matter what radio I use, I can't change it. Should I try to change a radio img file with HEX editor?

Do you have access to fastboot-mode (back + power)?
Hboot-mode (volumedown + power)?
Remove battery first and place it back to power off device if it is bootlooping
Sent from my A7-040 using Tapatalk

Yes, I have access to those two, but not to the recovery menu

My current fastboot info:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
Radio-3.22.20.17

Such a big forum and nobody can help me?

JoeFagundes said:
Yes, I have access to those two, but not to the recovery menu
Click to expand...
Click to collapse
Try this...
Download custom recovery 1.7.0 H (for 32A) and place it to sdcard
http://forum.xda-developers.com/showthread.php?t=530492
Go into fastboot-mode and run this recovery (you can rename to recovery.img)
Code:
fastboot boot /sdcard/recovery.img
If it done you can flash hboot 1.33.2010 S-OFF from recovery
http://forum.xda-developers.com/showthread.php?t=529019
If it done you will get right combination hboot 1.33.2010 / radio 3.22.20.17 and S-OFF
Then you can flash custom recovery (and custom ROMs for old radio)) or upgrade to hboot 1.76.2007 S-OFF / radio 6.35.XX.XX (and custom ROMs for new radio)

Thanks, but it's too late, I sent the phone to vodaphone, it's still under warranty

JoeFagundes said:
Thanks, but it's too late, I sent the phone to vodaphone, it's still under warranty
Click to expand...
Click to collapse
You chose right decision, cause it was only attempt to help.
Remember, Magic 32A must be in combination:
hboot 1.33.XXXX / radio 3.22.XX.XX
or hboot 1.76.XXXX / radio 6.35.XX.XX
They need to be updated together

I know that, the problem is that I couldn't change the radio, no matter what radio I tried, it always happened this, it didn't go past 97:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

JoeFagundes said:
I know that, the problem is that I couldn't change the radio, no matter what radio I tried, it always happened this, it didn't go past 97:
Click to expand...
Click to collapse
Yes. I read about same problem already.
http://forum.xda-developers.com/showthread.php?t=692101
p.s. Chances were when you had S-OFF.

Thanks, it was an interesting read, he had the exact same problem that I had.

Related

What else should i try?

Yesterday I got a phone from a friend. Mytouch3g
he gave it to me because it got stuck on the green splash screen.
I thought to myself hey i can probably fix it... well im out of ideas.
FASTBOOT:
SAPPHIRE PVT 32B ENG S-OFF
HBOOT-1.33.2005 (SAPP30000)
CPLD-10
RADIO-3.22.20.17
Apr 20 2009, 15:30:43
When i got it i was S - ON
i followed this tutorial
http://theunlockr.com/2009/08/14/how-to-root-your-mytouch-3g/
And i have gotten to S-OFF
Now i tried to flash some ROMs that i downloaded from here but no matter what i do it still gets stuck on the the green splash screen.
Also the recovery flash didn't stick
i always have to run this to get to the custom recovery
fastboot boot recovery-RAv1.2.0H.img
i don't know what else to try or what rom to try to get this thing to boot to android. And im afraid that if i keep messing with it I will brick it completely.
Please give me some ideas or directions on what to do.
Thx.
Im on TMOBILE US
OH I also tryed the RUU's but non of the US once worked.
I would just like it back to stock.
No one has any suggestions or ideas?
I spend many hours on the website and the interwebs and followed all sorts of tips and suggestions.
Also none of the threads with the stuck on the green splash have any resolution and concrete solutions.
Are you actually flashing the recovery, or just booting it? Try fastboot flash instead of boot.
Also you have the 3.22 radio, so you have to either change it, or use an ebi1 kernel. I would recommended finding ezterrys guide to update to 2.22.28.25 radio and 1.33.0013d spl
tvall said:
Are you actually flashing the recovery, or just booting it? Try fastboot flash instead of boot.
Also you have the 3.22 radio, so you have to either change it, or use an ebi1 kernel. I would recommended finding ezterrys guide to update to 2.22.28.25 radio and 1.33.0013d spl
Click to expand...
Click to collapse
Yes i have flashed the new radio
This is what it had original .. i wrote it down
SAPPHIRE PVT 32B SHIP S-ON
HBOOT = 1.33.0013(SAPP30000)
CPLD - 10
RADIO 2.22.28.25
OCT 21 2009, 22:23:27
I tryed fastboot flash system recovery-RAv1.2.0H.img ... but that didn't hold.
Is this wrong?
djm3ph said:
Yes i have flashed the new radio
This is what it had original .. i wrote it down
SAPPHIRE PVT 32B SHIP S-ON
HBOOT = 1.33.0013(SAPP30000)
CPLD - 10
RADIO 2.22.28.25
OCT 21 2009, 22:23:27
I tryed fastboot flash system recovery-RAv1.2.0H.img ... but that didn't hold.
Is this wrong?
Click to expand...
Click to collapse
Several issues there... your flashing an old version of ra for the 3.22 radio to the system partition. You need to do this:
fastboot flash recovery recovery.img
And you need the G version of amon_ra recovery.
and you need to get back to an eng spl to do that...
OK well it sounds like i'm am definitively doing this wrong.
There is so much information and so many threads of doing different things, how ever i did not find one that has a complete spoon fed step by step tutorial.
STEP 1?
So download one of these from this thread
http://forum.xda-developers.com/showthread.php?t=530492
Latest :
recovery-RA-sapphire-v1.7.0G.img (Click here to download from a Mirror) - MD5Sum: 8b3b5ff90575eba0c5bfc13c0fa6b8ea
recovery-RA-sapphire-v1.7.0G-cyan.img (Click here to download from a Mirror) - MD5Sum: 8846b53e3184d688e3e8a628ad81074f
and what is the command to flash it????
fastboot devices (to make sure that fastboot "sees" your device)
fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img
Is this correct? How do i get the Radio/SPL. What should i search for?
I found this
http://forum.xda-developers.com/showthread.php?p=10692873#post10692873
RADIO
The new froyo OTA for the Fender/MT2.1 is RADIO-2.22.28.25 This is the same 2.22.28.25 that was pushed to the 32B phones.
If you have a rooted phone and wish to upgrade you can use the safe zip file I've provided before:
update_2.22.28.25_S.zip // mirror
md5: 2e384ab42da375458fdb135063b7536b
This will verify your system can safely install the new radio and ask you to install it.
Note: please ensure you have a backup before flashing this radio sometimes is known for some wacky things on first boot until you can get into the system and verify the clock is set correctly.
HBOOT
The new 32b HBOOT is the one you have always been using 1.33.0013
I've more recently have made a hacked version 1.33.0013d primarily for the Dream to have a larger /system size; However currently I also recommend it for 32b magic/sapphire users due to its reduced restrictions on flashing NBH files, as well as access to fastboot erase.
Since I don't think there is any nbh file safe to flash on the fender/MT1.2 the benefits of installing 1.33.0013d seem minimal on your phone.. however for advanced users, it will unlock fastboot erase. (useful for swapping roms; however most people can just use Super Wipe)
If you do wish to update to this I have a special update.zip to migrate from 1.33.0013 -> 1.33.0013d
update-1_33_0013-to-1_33_0013d_S.zip
MD5: a68743f0b0e40aec9e18cbd02e6128fa
Click to expand...
Click to collapse
how do i flash these?
BTW i appreciate all you help and support and if i figure it out, I will put together a detailed set of instructions for others that encounter this specific issue.
You have to get an Eng spl. Probably by flashing a sappimg with one. I'm on my phone and am too lazy to find one for you.
After that just flash recovery, radio, and hboot like ezterrys thread says.
fastboot flash hboot hboot.img (1.33.0013 or 1.33.0013d hboot)
fastboot flash radio radio.img ( 2.22.27.08 or 2.22.28.25)
fastboot flash recovery recovery.img
fastboot reboot-bootloader
I'm pretty sure those commands are right, but they are from memory and could be spelled wrong or be in the wrong order.
tvall said:
You have to get an Eng spl. Probably by flashing a sappimg with one. I'm on my phone and am too lazy to find one for you.
After that just flash recovery, radio, and hboot like ezterrys thread says.
fastboot flash hboot hboot.img (1.33.0013 or 1.33.0013d hboot)
fastboot flash radio radio.img ( 2.22.27.08 or 2.22.28.25)
fastboot flash recovery recovery.img
fastboot reboot-bootloader
I'm pretty sure those commands are right, but they are from memory and could be spelled wrong or be in the wrong order.
Click to expand...
Click to collapse
I did flash sappimg using a gold card. Then i got the Vodaphone splash screen.
Then i flashed the myTouch 3g splash screen .
This is the tutorial that i followed.
http://theunlockr.com/2009/08/14/how-to-root-your-mytouch-3g/
How does one tell if they have the ENG SPL?
Do i have to do it again or can i just flash the hboot and radio and recovery?
Fastboot info
SAPPHIRE PVT 32B SHIP S-ON (original)
SAPPHIRE PVT 32B ENG S-OFF (after flashing sappimg with gold card)
djm3ph said:
I did flash sappimg using a gold card. Then i got the Vodaphone splash screen.
Then i flashed the myTouch 3g splash screen .
This is the tutorial that i followed.
http://theunlockr.com/2009/08/14/how-to-root-your-mytouch-3g/
How does one tell if they have the ENG SPL?
Do i have to do it again or can i just flash the hboot and radio and recovery?
Fastboot info
SAPPHIRE PVT 32B SHIP S-ON (original)
SAPPHIRE PVT 32B ENG S-OFF (after flashing sappimg with gold card)
Click to expand...
Click to collapse
You want Eng s-off
What radio and hoot do you have now?
SAPPHIRE PVT 32B ENG S-OFF
HBOOT-1.33.2005 (SAPP30000)
CPLD-10
RADIO-3.22.20.17
Apr 20 2009, 15:30:43
Good. Now just follow the steps on this thread: http://forum.xda-developers.com/showthread.php?t=831139
That thread is confusing . I will give it a shot this weekend and report back.
Sent via - HTC SENSATION.
Well i did everything you said and now it's running.
Thank you.!

writing 'hboot'... FAILED (remote: partition does not exist)

I was upgrading my G1's RC29 to GingerYoshi and came upon this problem in the install process.
fastboot flash hboot hboot-1.33.0013d.img
sending 'hboot' (512 KB)... OKAY
writing 'hboot'... FAILED (remote: partition does not exist)
I found this in the forums as a solution but couldn't comment on it because I have less than 10 posts....so here's my first. The solution below totally works. A big "Thank you, thank you" to lbcoder.
http://forum.xda-developers.com/showthread.php?t=479687&page=2
That is because the 0.95.x000 SPL's do not have the hboot partition mapped.
You need to do one of two things;
1) Recovery-update to 1.33.2003 (note the "3". This is NOT a "5".) -- the "2003" spl has the hboot partition mapped.
2) ERASE your recovery partition (and test that it is erased by trying to boot into recovery -- it should boot into FASTBOOT), and then recovery-update to whatever SPL you prefer. I know, this sounds impossible -- just how do you boot recovery if your recovery is empty? By "fastboot boot recovery.img".
Either of these approaches should be fine.
no moed
chatwithmike said:
I was upgrading my G1's RC29 to GingerYoshi and came upon this problem in the install process.
fastboot flash hboot hboot-1.33.0013d.img
sending 'hboot' (512 KB)... OKAY
writing 'hboot'... FAILED (remote: partition does not exist)
I found this in the forums as a solution but couldn't comment on it because I have less than 10 posts....so here's my first. The solution below totally works. A big "Thank you, thank you" to lbcoder.
http://forum.xda-developers.com/showthread.php?t=479687&page=2
That is because the 0.95.x000 SPL's do not have the hboot partition mapped.
You need to do one of two things;
1) Recovery-update to 1.33.2003 (note the "3". This is NOT a "5".) -- the "2003" spl has the hboot partition mapped.
2) ERASE your recovery partition (and test that it is erased by trying to boot into recovery -- it should boot into FASTBOOT), and then recovery-update to whatever SPL you prefer. I know, this sounds impossible -- just how do you boot recovery if your recovery is empty? By "fastboot boot recovery.img".
Either of these approaches should be fine.
Click to expand...
Click to collapse
Pleasee help me htc one dual sim stuck on black screen but fastboot is enable
and i tried ./fastboot getvar all
this appears
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.49.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) imei: 355195000000010
(bootloader) meid: 00000000000000
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 3681mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: UNKNOWN
(bootloader) commitno-bootloader: dirty-f6d46eca
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
pleaseeee helppppppp meeeee
the same problem
I have the same problem and now I know how to fix it..
but my big problem is the spl 1.33.0013d
well I flash the radio 27.08 or 28.25..wathever ,they flash with no problems..
but when I flash after the spl 0013d the phone be brick...whats is the problem??
I check the md5 and it's ok..that spl is teh big cuestion for why brik my phone ???
I caan't understand.
please help me..I'am learning english and I understand a little bit the english language..not too much...help
note: my phone works fina with spl non signed and I don't know for why too..
only with signed spls is the problems..
hard spl works fine
enginer spl non signed works fine too...
si alguien por aca sabe tambien español que me ayude o coopere ya sea aqui o por SMS text..
FIN/END
Write down everything on bootloader screen here also what is current recovery, and what do you mean by bricked?
Sent from my Nexus 4 using XDA Premium 4 mobile app
ok
men...rigth now I'm using radio 23.02 with hardspl signed..and the phone are not brick and fastboot mode works fine (before not work and the pc don't detect nothing and now with this the pc detect adb ect.ect.)
but I dont have a rom that work..all the roms I have dont work...is there any rom to work with the radio and spl above?..will be good..any url
dont tell me to flash again newer spl ( the radio I accept but the spl is the preoblems))..
I guess I'm still not following fully, but each ROM has specific requirements, some one radio/SPL and some another. You need to match your ROM or at least kernel to your radio/SPL
If you boot to bootloader and write down everything from that screen I can suggest a ROM or two that will work
Sent from my Nexus 4 using XDA Premium 4 mobile app
Helpppppppp¡¡¡¡¡
I dont know how todo...this phone bkreak my head ...I rty again ,again ..and nohting nhothig work....THE ONLY I WANT IS A CUSTOM FUKER ROM..ESPECIALY IF GINGERBREAD :: but i try the solution here ( hboot partition does'nt exit) but i cant solve too this problem,,I flash the spl 2003 but thy brik my phone
CAN YOU HELP ME
right now I HVE THE ORIGINAL ROM (android 1.0,rooted,I used super one click root and work fine) I gave out the lock screen ´´i dont know the word ,,brig gave ,,cut ,,sorry I dont know....but yes I on android 1.0 stock without the lock screen (stup wizard) -..
this is the info from the recovery-
DREAM100 pvt 32b
HBOOT-0.95.0000
cpld-4
RADIO-1.22.12.29
now I have the 1.5 stock update..and if I flash to this update ,all is the same in fastboot ,the only change is the radio to .261 and I can't find the undate 1.6 stock,,I dowloaded that but the zip is coruupted ..
I like this phone (qwerty,touch,android,and ((old good to hack yea)) and is the first android phone in the world..
the others android phones are the son's from this....
how I can push pictures here of my android from my computer???
and I can create post here??
That info is from bootloader screen, this is good now I know your next steps
Can you boot to recovery and let me know which one you have? The one you want is Amon_ra1.7
After you have this you will need to update your radio then SPL, once done flash a ROM (like cm5) to test. After this you need to flash another radio then SPL and then you can flash a gingerbread ROM.
So first we need to confirmed which recovery you have....
Sent from my Nexus 4 using XDA Premium 4 mobile app
By the way, this link has full instructions
http://forum.xda-developers.com/showthread.php?t=2189589
hboot
I follow that instrucctions but is the same probles...wharever radio work but the spl does'n work..
I dont know what to do...
I can flash any radio and works fine with hard spl...but another spl not work...
I take pictures of the phone..;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when I try to install spl from fastboot or terminal emulator , they say me( error hboot partition doesn't exist) I tryed install teh solution here in this post ( flash 203 spl) but they brick again the phoen
and thas all .whats is tthe real solution for this
Well from your pics I'm guessing you flashed a clockwork recovery, you should try amonra, use the same flash_image method to get this.
Once you have this recovery installed boot to it and there is where you flash the first radio.zip and then the hard/danger SPL.zip
Once this is done you can boot to bootloader to confirm which radio and SPL you are on, if all is good you then can either boot to recovery and flash a compatible ROM (like cm5) or if you want something newer you then need to another radio and SPL with fastboot in order to get an 'updated' ROM
As for fastboot not working, this is either an error in the command (can't say unless you post input/output from cmd/terminal) or you don't have access to fastboot commands with current bootloader.
Sent from my Nexus 4 using XDA Premium 4 mobile app
I HAVE AMOn RA ... I only change but yes i flash to amonra ,,I use amonra ..I used the clock recovery beacuse it have the option to navigate in the sd card..(amno ra does not have that..)
ok look..whaterever radio work..but with the only spl work is te hard spl signed..and when I go into fastboot the screen is white and the fastboot work fine ,the phone not shut down,,that is evidence that work ,,gooodd..
but only that..radio( 23.02,,27.08,) and (hard spl) thast all ,, now i want a rom that work with this ,,there are any rom?? because I can't flash any radio or any spl in .img format BEACUSE I get: hboot partition does not exist ....
roms please
hnote: the cm5 require danger spl,,mmm can cm5 wok with "hard spl signed" ??
Danger SPL is the same as hard SPL, just different words for the .2500 SPL (can't recall the exact # its been a while)
If you want help getting fastboot to work you will need to copy and paste here all input/output from terminal/cmd, the error you are getting is caused by typing in the wrong command or not have elevated privileges, if you want further help just do these quick simple things
Write down everything that is currently on bootloader (yes the white screen with the androids on skateboards, write down word for word)
Then we can make sure which radio and SPL to download through fastboot next, and when you do this copy and paste all input/output here
Sent from my Nexus 4 using XDA Premium 4 mobile app
ok
danger spl is the same as hard spl hee¡¡ good..
well I now about comands, su #
ok I have the radio 22.22.23.02 and hard spl.
this is I have in the fastboot screen:
DREAM100 pvt 32b
HSPLD 10.95.3000
CPLD-4
RADIO-2.22.23.02
oct 20 2008
FASTBOOT or SERIAL 10 and the androis are there in skateboards,,I wana psuh pictures here but the internet is bad..
so...wich is the next step...
OK, current radio is good but you have the old hard SPL, you need the .2003 or .2005
Check the link I sent you earlier for downloads or if you need I can get you a link
So your next step is to change to one of these two SPLs
Sent from my Nexus 4 using XDA Premium 4 mobile app
ok I get it...
I has benn dowloaded..so i goin to try
I wana show you some pictures..this pictures are before..
that dastboot screen is the only boot option i have when the phone be brick....and look the other picture is the error when I try to flash IMG files
ok I'm goin to flash the nwer spl that you gave me previously..
NO WORK:: THE PHONE HAS BRIKED AGAIN::: if I CAn only have the hboot partition..I think thas is the big problem but there is no sulotion anywhere...so what I can do??
You can't use a terminal emulator to flash the bootloader (hboot bootloader and SPL are the same term here) you must flash through fastboot
I don't know what you mean when you say bricked, a bricked phone is one that won't turn on at all, no recovery, no bootloader, no os, no anything, only recoverable by JTAG
With the old hard SPL you need flash the .2003 or 2005 through recovery as you don't have fastboot options
Sent from my Nexus 4 using XDA Premium 4 mobile app
YES that phone has been briked as 7 or 9 or 10 times
but i goin it back wen It briked,,when i try to power up..they only power up and show the white screen and quicly shut down (has millisecons) .thats when I try to enter in recovery they do again the same (white screen and quicly shut down) ..in fastboot again the same too...thats is the brick...but I found a tip I hold the camera button for large time (like 10 minutes or more) and they in rare time get it on fastboot but the other fastboot ( to recovery the phone flashing DREAM.IMG )..
I FOUND A MISTAKES WHEN I have that brik..
.I haved that brick recently ,but I press ( home+menu+power without releasing the buttons ) and from the recovery briked (yes the recovery are briked too) the phone restart and power up without the briked screen ,,it go into g1 logo...so right now I'm goin to try flash the radio,spl,spl again etc,etc.. and if it brick again I now what to do...maybe skip that brick and enter directly to the phone..
Well if you flash the dreaming.nbh and go back to android 1.0 then just use flash_image in a telnet to install amonra
Then flash appropriate radio from recovery
Then flash .2003 SPL or .2005
From here you will have fastboot commands and can upgrade to ezterrys 2708+ update
Sent from my Nexus 4 using XDA Premium 4 mobile app
HEY MEN FINALY I FOUND A SOLUTION::
not ot all but yes it work...
ok look my steps:
from the original rom android 1.0 ( no moded)
1- you need root acces (super one click and bypass google method)
2-install amon RA recovery--is easy
3-from recovery RA flash the radio 23.02
4-now wihtout reset flash the hardspl (the old you say I have)
5-you are into recovery again,so flash the spl 2003....when it finish NOT REBOOT,,DONT GET OUT FROM RECOVERY..sorry the big words
6-now from there flash: update-cm-5.0.8-DS-signed :that is the rom YOU RECOMEND ME::BY THE WAY THANKS
7-when it finish .rebbot..but when I rebbot the phone be briked..I told you remenber (the white screen show only milliseconsd and the phone quicly shutdown..but now I have the solution..
8-with the phone off go into recovery ( there in recovery I see only one option and is clear storage....well DON'T CLEAR) press SEND+MENU+POWER without release the keys..and wait for the phone power up..REMENBER DON'T RELEASE THE KEYS and thats all you will see the G1 BOOT SCREEN logo....at this you can release the kes UFFF ..THIS IS A MISTAKE ..BUT WORK YEA:.
the only problem is when you powerup the phone you neerd to do this method..(send+menu+power at the same time) this is awful but from weeks of battle I think this is the best way I see in this phone..
hey men thanks for your help ...............can I update to cyanogenmod 6 or 7 ? or another from OTA from this phone you know wifi 3g etc..???
here are some pictures from my new phone updated...
hey this rom don't have file manager..

I need a Help for my magic 32b !

hi my phone is htc magic 32 b i have atach two photos, for my information
i have follow this tuto :
CLShortFuse for making super easy Rooting method. Original topic.
SuperOneClickv2.3.3 .... and it says that my phone was done successfully root
and next step i have follow this tuto:
http://forum.xda-developers.com/showthread.php?t=529019
but when i do this:
fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img
i have this result :
C:\Android>fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img
sending 'recovery' (4520 KB)... FAILED (remote: not allow)
finished. total time: 0.001s
and now pls can someone help me wich tuto must follow to install custum rom or what to do
thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not development topic!
Anyway, it's better to upgrade your phone to newest combo
Scenario:
1. in fastboot-mode (like at first screen) run
Code:
fastboot getvar cid
fastboot getvar cidnum
You will get your regional customerid (CID)
2. According CID choose appropriate RUU from library in section "Vodafone Magic / Sapphire 32B: http://forum.xda-developers.com/showthread.php?t=659403
3. Run it. Now you have build number CRC24 (Android 1.5), after RUU you will have build number DRC92 (Android 1.6), but it is not enough.
4. Then you need apply two update files to get hboot 1.33.0013 / radio 2.22.28.25 (VODAFONE OTA UPDATE from DRC92 to FRG83D)
This combo is most used combo for Magic 32B now. You will have Android 2.2 too.
5. At this step you need get root again (cause it will disappear while installing official roms). Run SuperOneClick
6. Even on Android 2.2 you can not run "fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img", cause hboot 1.33.0013 does not allow it too like hboot 1.33.0007
In this case you need follow steps 5, 7, 9 (only these) from manual: http://forum.xda-developers.com/showpost.php?p=7707672&postcount=1
p.s. Sure, you can do step 6 instead to get custom recovery, but your current combo (hboot/radio) is not used in custom roms. So you have to change it in future. It's better to change them first following all steps in this post.
thank you so much now i have 2.2.1 5[Strogino]

Need help recovering TM MyTouch 32A with SPL(old) Radio(new) mismatch

I loaded new Radio, SPL and Recovery on my phone and lost recovery after that. So I decided to load TM 2.10 release and it overwrote SPL and got hung up loading Radio causing SPL Radio mismatch. Long story short, after that I got great help from mumilover to load SPL 1.33.0014G and unlock the bootloader. Loading of 1.33.0014G changed version-main to 3.57. However good news is boot, recovery and system image files can be loaded one by one making seperate ZIP files with custom android-info.txt files.
I tried cwm-carz-v4.0.1.4-0820-recovery, recovery-RA-sapphire-v1.7.0G, recovery-RA-magic+-v2.0.0.1-seo, recovery-RA-hero-v1.6.2, recovery-clockwork-2.5.0.7-sapphire and recovery_patched___ra162_635 recoveries, but none of them starts. Also tried to load boot and system images from various releases but with unsuccessful boot.
I tried to load recovery as boot but gives partion update error.
I am looking for any suggestion or special recovery or boot and system image enabling to give access to android system or recovery.
Phone display following on HBoot screen.
*** UNLOCKED ***
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0014 (SAPP31000)
CPLD-13
RADIO-6.35.16.19
Jan 31 2012, 14:43:52
What's about mumilover? Did he help again? (He is best tech here)
p.s. try
Code:
fastboot flash recovery your_recovery.img
We could make our own recovery image, the source is open on git.
The only thing it has to do, is to flash eng spl on the device!
I have a school project due May 23 and have limited time... but you have me on skype, lets see what we can do :0)
I recovered my phone with XTC Clip
http://forum.xda-developers.com/showthread.php?t=1231297
However my HBOOT is at 1.33.0014, which is different then yours. Do you know XTC clip supports this HBOOT?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[Firmware] HTC ONE M7 | Firmware 5.11.661.8 | No Red Text | Radio 4T.27.3218.14

This is the latest firmware for HTC ONE M7 extracted from official OTA for TELUS, 5.11.661.8
You need unlocked bootloader and S-OFF
I removed Red Warning Text and flashed successfully on my phone.
This build is for
development purposes only
Do not distribute outside of HTC
without HTC's written permission.
Failure to comply may
lead to legal action.
The zip contain:
- firmware 5.11.661.8
- hboot 1.57.0000
- radio 4T.27.3218.14
- the new splash screen "powered by android"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download file and copy to your adb folder:
A - full firmware link removed
MD5 be417a18c76ef0e517f32266e4b5d744
B - hboot only link removed
MD5 4b74f5f8c47bdd6aa2fc20446e5ce743
DON'T REBOOT THE PHONE UNTIL YOU GET A SUCCESS MESSAGE​
1 - Reboot bootloader
Code:
adb reboot-bootloader
2 - Reboot to RUU
Code:
fastboot oem rebootRUU
3 - Flash firmware
Code:
fastboot flash zip firmware_5.11.661.8_noredwarn.zip
Very important!!! One more time
Code:
fastboot flash zip firmware_5.11.661.8_noredwarn.zip
3b - Flash hboot only, if you want
Code:
fastboot flash zip hboot_1.57_no-red-warning.zip
4 - Reboot to bootloader and verify version
Code:
fastboot reboot-bootloader
5 - Reboot to system
Code:
fastboot reboot
6 - Enjoy
WARNING
Flash at your own risk, I can't be held responsible if you brick the phone!!!​
If case you need original firmware for modelid: PN0712000 cidnum: TELUS001
The zip contain:
- firmware 5.11.661.8
- hboot 1.57.0000
- radio 4T.27.3218.14
- the new splash screen "powered by android"
- stock boot
- stock recovery
link removed
MD5 895F3ADD2CCC1DE09F85910DCFE94B99
If flashed successfully please post your modelid and cid here.
Thanks
Flashed succsessfully on PN0710000 with super cid...:good:
I'm looking for the Telus M7 firmware for sense 6 - why were the links removed in this thread?
Sent from my HTC One using Tapatalk
Can you help me? Bricked my phone!
So I did something pretty dumb yesterday. Installed the HTC Sense 6 update on my HTC ONE M7, hated it so decided to root my phone to revert back to Sense 5.0 or 5.5 or potentially try a custom ROM. Downloaded a Tmobile 4.3 JB RUU, downloaded android SDK, HTC sync manager, Fastboot. I unlocked boot loader, installed Wheaton recovery by Koush, installed SU, figured phone was rooted but it wasn't. Now I've somehow succeeded in deleting EVERYTHING. Phone continues booting into recovery. Commands using Fastboot aren't recognized because it cannot find any device. When plugged in via USB, PC recognizes that something is plugged in but that's about it.
M7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4T.27.3218.14
Open DSP-v32.120.274.0909
OS-5.14.531.1
eMMC-boot 2048MB
May 9 2014, 15:00:26.0
HBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
CHECK SMARTSD
IMAGE CRC
SHOW BARCODE
Any help will be greatly appreciated
rodenti said:
I'm looking for the Telus M7 firmware for sense 6 - why were the links removed in this thread?
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Some issues with corrupted zip files.
Download from here
http://forum.xda-developers.com/showthread.php?t=2485651
bonedatt said:
So I did something pretty dumb yesterday. Installed the HTC Sense 6 update on my HTC ONE M7, hated it so decided to root my phone to revert back to Sense 5.0 or 5.5 or potentially try a custom ROM. Downloaded a Tmobile 4.3 JB RUU, downloaded android SDK, HTC sync manager, Fastboot. I unlocked boot loader, installed Wheaton recovery by Koush, installed SU, figured phone was rooted but it wasn't. Now I've somehow succeeded in deleting EVERYTHING. Phone continues booting into recovery. Commands using Fastboot aren't recognized because it cannot find any device. When plugged in via USB, PC recognizes that something is plugged in but that's about it.
M7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4T.27.3218.14
Open DSP-v32.120.274.0909
OS-5.14.531.1
eMMC-boot 2048MB
May 9 2014, 15:00:26.0
HBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
CHECK SMARTSD
IMAGE CRC
SHOW BARCODE
Any help will be greatly appreciated
Click to expand...
Click to collapse
Post questions in Q&A section please
Thread closed at OP's request.

Categories

Resources