I am stuck on the bootloader screen, I can plug in and it changes from Serial to USB, but if I reboot it goes right back to bootloader .. how do I fix this?
I was trying to change to boot logo using THIS method.
I have a Verizon HTC Trophy (Spark_W)
Thanks!
I wound up reflashing my ROM to fix this ... if anyone knows how to fix without reflashing please post, just incase it happens again .. Thanks
W7 64bit didnt allowed me to create file, but I'm unsure if that nbh file will work because it is made for HD2...or maybe you need jut diferent Custom RUU
Yes, HD2 is completely different phone, someone would have to port this tool to work on Trophy.
Tried at weekend optionaly to enter diferent PID or whatewer number... Result 3 restores in 30min
Related
Hi guys!
I've got bricked HTC 4350 from one of our employees - seems it has drowned
But in some way it still works - it boot into bootloader (RGB screen), connects via usb, I can even flash it with official RUU. But after flashing ends it still boots into bootloader. Tryed to fix it using mtty but recieved message that task command is unknown.
Maybe you have any ideas how to unbrick it?
Or it is lost?
Thanks in advance!
Click me
Cheers
Thank for the link, but I've done this several times and PDA still boots only to bootloader. I've tried wm5.1 ruu and wm6.1 ruu. It only changes spl numbers.
I need to boot to windows.
Click2
Cheers
Thanks! I've f**cked with goldcard several hours and nothing worked.
Buut occasionly I've found that I need to hold button on other side to boot to OS. Weird staff I know but that's how the things are.
Anyway thank you for your help!
Hey there, just want to say before I tell you my problems that this forum is cool. I recieved a lot of useful information and tools for my phone here. Thanks.
Onto the problems!
Okay so first of all, I was given an HTC Vogue on the Telus network from a buddy because my previous phone fell in the pool. I was having a blast with this phone, 'twas the best thing that ever happend to me.
Now before I get into specifics, I'd like to mention that I've never been able to connect to activesynce because the computer would not recognize the USB cable. I've never been able to fix that problem.
Recently I've been having problems with my phone. Sometimes it would take a little spill onto the floor from my lap because I'd forget it's there or whatever. The back casing would come off and the battery would come out. No worries, I would just pop it back in and off I go. But this time it would boot up to the Telus screen with the buncha red writing.
Code:
M 03
B 01
P DCAAXOM-4350H
R 3.41.00
D 3.07
After that text disappears, the phone would freeze at the Telus screen and either: a) No LEDs would flash b) a yellow LED would come on c) THe phone would be left on that screen and just shut off after a while.
So i did some research and found that I could preform a hard reset. Voila! It worked like a charm and I was off using my phone again, but it had barely been 24 hours before the phone froze and I had to reset. And the phone would revertback to the previous problem. Hard reset would NOT work. It would reset the phone but still freeze. Sometimes it wouldn't even stay on the hard reset, the phone would shut off as soon as I release the SEND button after holding all fo the hard reset buttons. So i went back here and on Google to look for the fix.
I've done a bit of research on possible fixes to my phone like disassembley of the phone and the placement of plastic sheet over a processor of some sort and flashing the ROM.
So what I did was look up some custom roms and what not. From what I understand you need a CID Unlocker before custom roms can be used. I looked around and found that I need the USB connector to work for the phone to become unlocked. But this conflicts with my current situation and whenever I try to flash with a custom rom from the microSD, it takes me to the Loading... screen and stays there without any mention of flashing a ROM. This is also the case when I try to put the CID Unlocking .nbh on my microSD card.
So I ask what I can do for my phone to revive it. I've done extensive searches on any fix to my phone with little or no result. I need some fixes fast because I have a tonne of important calls coming in that I need to answer. I will not accept that my phone is dead.
Please guide me in the direction on how to unlock the CID with a microSD card. Or just anything that'll enable me to use my phone again. I con't afford ot buy another one.
BTW
The info on my boot loader screen reads.
VOGU100
SPL-2.01.0000
CPLD-11
BTW
The info on my boot loader screen reads.
VOGU100
SPL-2.01.0000
CPLD-11[/QUOTE]
I gather that you can get to the boot loader screen by the above info. While on that screen try pluging you cable into a direct USB port on the computer and then into the phone. If your phone is recognized it will change from serial to USB at the bottom of the multi color screen. If that doesn't work let me know.
Also here is a link for the unlocker for the CDMA Touch on PPC Geeks
http://forum.ppcgeeks.com/showthread.php?t=20370
whitey10tc said:
BTW
The info on my boot loader screen reads.
VOGU100
SPL-2.01.0000
CPLD-11
Click to expand...
Click to collapse
I gather that you can get to the boot loader screen by the above info. While on that screen try pluging you cable into a direct USB port on the computer and then into the phone. If your phone is recognized it will change from serial to USB at the bottom of the multi color screen. If that doesn't work let me know.[/QUOTE]
I've tried that. The phone reads USB but the computer can't recognize the phone. Activesync won't work either.
EDIT
I've tried flashing with a stock rom. Everything runs fine in that screen. I soft resetted the phone and it went to the windows mobile 6.1 screen with an orange LED and just sat there, I wanted to wait but impatience got the best of me and I soft resetted and now it gets stuck on the telus screen again. Sometimes the green LED flashes as if the phone was running normally and the screen dims. I don't know whats going on.
I think I've tried that ppcgeeks thing but I can't be sure. It doesn't work because I can't connect my hpone with the USB cable.
My boot loader screen has changed after flashing the stock rom. It now reads:
Code:
VOGU100
SPL-2.01.0000
CPLD-3
same problem after flashing, just different writing on the boot loader screen.
patience
patience is the key.
patience is the key.
If you go to bootload screen connect cable and it changes to USB you should be connected.
Also here is a link to a tutorial
http://forum.xda-developers.com/showthread.php?p=3680838#post3680838
To be sure that your computer is not connecting to the phone plug usb in go to deivce manager and double check the USB if it is not connected correctly it will have a warning sign by that port. Try reinstalling updating your drivers for the usb.
patience is the key.
patience is the key.
beanage said:
My boot loader screen has changed after flashing the stock rom. It now reads:
Code:
VOGU100
SPL-2.01.0000
CPLD-3
same problem after flashing, just different writing on the boot loader screen.
Click to expand...
Click to collapse
You need to flash the SPL 2.31 bootloader
It appears as if it's fixed for the most part. Some minor problems but that doesn't stop the fucntionality of the phone. But I'm still pretty pissed that no matter what i do, my phone will not be recognized by the computer with the USB cable. i've tried everything and looked everywhere. Does someone want to send me the usb drivers for the Vogue? Please don't tell me that i don't need drivers because activesync won't connect. I've seriously looked all ove rthe internet for fixes and none of them work. Any pointers ro anyone want to send me official HTC drivers? I want to start using cooked ROMS.
here you go HTC windows driver will work for the vogoue
http://www.4shared.com/file/94429326/ffb09a5f/WindowsHTCdrivers.html
But unfortunately won't solve active sync problem. I would uninstall activesync and reinstall on your windows XP computer.
Quote from HTC website
Q.
Activesync is not recognizing my device, what should I do?
Be sure that you have not connected your device to your PC before you installed Activesync. If you did plug in your device before installing, uninstall Activesync and start the process over ensuring that you do not plug your device in until after Activesync has been installed.
Verify that your device is recognized by your PC in the Device Manager; if it is not, resolve that issue first.
Unplug your device from the PC for a few seconds and then plug it back in.
Perform a Soft reset on the device while it is plugged into the PC.
On the device, go to Start>Settings>Connections>USB to PC and check the "Enable advanced network functionality.
crap, my phone just ****ed off again. Same deal as before. Hate being broke.
help with vogue frozen loading screen
i unlocked my vogue and flashed NFSFAN 6.5 ROM and now phone freezes at loading screen and will go no further. i can still pull up bootloader thats all. any help or tips would be appreciated. thank you
what is your bootloader version
htc boot up screen and bootloader
m03
b01
acaaam-4070
r 2.26.00
s 3nfs
vogu100
spl-0.41.coke
cpld-3
are you using a GPS ROM if so you have the wrong bootloader and need the 2.31 from this post http://forum.ppcgeeks.com/showthread.php?t=20370.. Install the 2.31 and give it a try.
tried using 2.31 unlocker, when i run the RUU and says it will take 10 min it accually takes 10 sec and installs fast then after my phone restarts bootloader still says .41
You need that SPL 2.31 for that ROM
http://forum.xda-developers.com/showthread.php?p=3680838#post3680838
This is a quote from the facts thread for your ROM
First go here http://forum.ppcgeeks.com/showthread.php?t=20370 and
READ the hell outta it until you have it step by step.
(BTW use the 2.31 unlocker regardless about the GPS thing)
OK, now that you've read that (happy dance time)
Download the 2.31 Unlocker and NFSFANs WinMO 6.5 ROM.
Here is a good link for the boot loader. unlocker.
ftp://up.ppcgeeks.com/Vogue/Users/ImCoKeMaN/Vogue_unlocker_MFG_2.31.exe
yeah still can't get 2.31 to load on my phone. i tried to flash the stock alltell and sprint roms but at 29% it freezes or has recovery issues and will not go past 29%. flashed dcd 0.2.0 and got it to load! bootloader still shows .41 but now when i boot up phone it says in red at bottom of HCT boot screen.
m 03
b01
No radio
d1.17
Who is the original carrier You will need to get that OEM ROM and flash it. Then run the 2.31 unlocker follow the directions you can use the bootloader on the factory rom I have done it with sprint and alltel Vogues. The OEM ROM will reinstall your radio then you canuse the unlocker. The .41 unlocker is for non GPS radio and ROM combinations.
My friend asked me to try recovering his T-mobile DE Hero, it was bricked while my friend was trying to root it
I tried to flash official rom, but RUU gets error 170...
This what appears on screen when device is on:
error 170... thats the usb connection error right?
this could be because the drivers are not installed properly.
read this thread, then try again
http://forum.xda-developers.com/showthread.php?t=647353
Although error 170 is indeed USB error, (with windows 7 normally) the nasty looking Icon at the bottom of the screen does not look good, never seen that before
Let us know how you get on please
I had the same error with mine.
I ended up in installing a custom ROM, since NOTHING would work. No drivers no nothing. It just refused to read the phone.
I installed VillainROM 12, it has OS 2.1 so it's working perfectly
I had the same problem, but I was trying to flash my German G2 using an HTC Official RUU. I've been able to flash the recovery rom using fastboot and then boot it, but that's where my progress has ended. I'm about to flash VillainROM12.0.0-Full and see what happens. I'll let you know.
EDIT: VillainROM12 installed via AmonRa Recovery menu, but rebooting takes me right back to the RUU screen with an Xed-out EPROM
Nothing helped
I tried everything You said, but device is showing same screen, I also tried using SD card method but when I turn Hero on (while holding Vol-) same screen appears
Does anyone have any other idea what to do?
Its looking like a problem with a radio (drivers etc). Try to update it through recovery if u can enter there.
You can see in my first post the only screen where I can enter...
Well.. This icon with a "chip" probably say a SPL or Radio of phone is just f***ed up.. :/ You can enter to fastboot so drivers of graphics and other modules are in good condition..
wheeeler i think u should find a .zip with a official SPL and radio and update it through recovery like u did it with Villain ROM
I got some idea but I think u tried it before.
iwanrakic U can connect to phone via SDK?
Try this command. It should update it.
C:\sdk\tools>fastboot flash radio radio.img
Of course u need image of official radio.
What driver does Windows report installed when you plug it into your PC in that mode?
Recently flashed to NSFfans 6.5 WM rom. I couldn't activate the phone on my account because it wouldn't take the ##...# codes.
Long story short I attempted flashing Bigstorage_SprintTouchRom.exe to try and get back to sprint software where I could use the ## codes.
Everything went smoothly until first boot when it stopped at the "HTC smart mobility" screen. I then hard reset it (send+end+reset button on bottom) and it is still locking up on that screen.
Did I just break my phone?
Thread moved to General.
No, you didn't brick it. It simply sounds like a bad flash.
Try flashing to another rom and see what happens. Which unlocker did you have on? 2.31 or .41?
BTW, if your ## codes don't work is probably because you are using a themed dialer. NFS' rom has a folder under Start Menu that is called "Phone Codes". In there, you will find the PST shortcut, which will allow you to program your phone.
if you can get into the bootloader (tri-color screen) then you haven't bricked it.
Sorry for posting in the wrong forum.
How can I get to the boot loader if the phone stays at the "HTC smart mobility" boot screen?
I tried using the rom update utility but it's not connected so it won't do anything.
---------------------------------------------
Edit: Okay, I have successfully re-flashed back to 6.5. The bootloader can be accessed by turning on the phone while pressing the camera button.
I am using 2.31 unlocker. When I try and activate the phone again what do I need to change in the phone codes to make it work?
Thanks guys.
Jacob_newton said:
Sorry for posting in the wrong forum.
How can I get to the boot loader if the phone stays at the "HTC smart mobility" boot screen?
I tried using the rom update utility but it's not connected so it won't do anything.
---------------------------------------------
Edit: Okay, I have successfully re-flashed back to 6.5. The bootloader can be accessed by turning on the phone while pressing the camera button.
I am using 2.31 unlocker. When I try and activate the phone again what do I need to change in the phone codes to make it work?
Thanks guys.
Click to expand...
Click to collapse
Under the PST programming, more than likely you will only need to change:
MSID
MIN
HOMESID
username and password (for internet)
You shouldn't need to mess with anything else afaik.
i cant make my phone go up normaly
i have the same problem and i tried to flash with others rom's with no succes ... my phone still locked in start screen . i dont know what to do.. i still can flash normally but i dont know wich rom will get back my phone again.. anyone help me plz!!
Osiii said:
i have the same problem and i tried to flash with others rom's with no succes ... my phone still locked in start screen . i dont know what to do.. i still can flash normally but i dont know wich rom will get back my phone again.. anyone help me plz!!
Click to expand...
Click to collapse
Details, details - how have you flashed? Have you tried flashing from bootloader? Flashing a carrier rom from bootloader should do the trick.
mrkite38 said:
Details, details - how have you flashed? Have you tried flashing from bootloader? Flashing a carrier rom from bootloader should do the trick.
Click to expand...
Click to collapse
Its ok already fix it... =) but i think i need to start over again from unlock to flash it with another rom!
I need help guys. I tried to flash the bootloader and something went wrong. Now it starts up with the three color and have this displayed.
RUUNBH
PANT200
SPL-0.36.0000
CPLD-2
Upgrade ROM code error
Please try again
Serial
It can still detect the USB connection, however it will always timeout. Can anyone help me out with this? I am new to this; So if you can be as detailed as possible it will be great. Thanks in advance.
Update:
So far i've tried loading rom from sdhc card formatted FAT32. With Matbee's version and also Cfays wm6.1. Both however are stuck at Loading after bootloader.
I've tried connecting it to windows but since it won't sync, I can't do anything there. At this point, anything I can do or try is worthwhile.
Thanks.
q+a
id try re flashing to unlock it
prolly by loading it in bootloader mode
if it wont connect during flashing disconnect the usb and reconnect once it starts
lemme kno what u try