My little bro is gonna get a zte blade for His birthday and he don't want 2.1 on it so i wonder if there is an official 2.3 update or i need to root it? And if i need to the how?
Some help would be nice
Try caynogenmod 7,if ur bro want much better performance than use brustlam's ics AOKP MIX CM9 it awesome, better batery life.....
blader95 said:
Try caynogenmod 7,if ur bro want much better performance than use brustlam's ics AOKP MIX CM9 it awesome, better batery life.....
Click to expand...
Click to collapse
Well it will be some months warranty and after that he will update to cm7 or cm9. So is there any official update? And will z4root work?
Sent from a X8 using my thumbs
RomWiz said:
My little bro is gonna get a zte blade for His birthday and he don't want 2.1 on it so i wonder if there is an official 2.3 update or i need to root it? And if i need to the how?
Some help would be nice
Click to expand...
Click to collapse
U need to root it. Use z4root mod (a software widely available) and select permanent root and reboot ur phone. Next flash cyanogenmod. U could go for cm9 but for a new user, a fully stable cm7 is better. Try burgerZ kang found in cm7 kang thread in the blade android development section. Download the rom and the Gapps
Download rom manager and flash clockworkmod recovery. Backup data
Put the rom and gapps in ur sdcard. Reboot into recovery by pressing volume down and power. Wipe data and cache. Select install zip from sdcard and flash both the rom and gapps
Reboot.
See the link in my "cm7 ics" thread in the Blade general for an ics look
QuantumFoam said:
U need to root it. Use z4root mod (a software widely available) and select permanent root and reboot ur phone. Next flash cyanogenmod. U could go for cm9 but for a new user, a fully stable cm7 is better.
Click to expand...
Click to collapse
I'll Try this when he gets it in about 2 weeks :thumbup:
Thanks
I have read that some roms gives you access to all the 512 mb of RAM instead of 256 mb is that possible?
Sent from a X8 using my thumbs
Don't wait for the official updates. You're loosing a lot
Root and custom rom it's a must!!
QuantumFoam said:
U need to root it. Use z4root mod (a software widely available) and select permanent root and reboot ur phone. Next flash cyanogenmod. U could go for cm9 but for a new user, a fully stable cm7 is better. Try burgerZ kang found in cm7 kang thread in the blade android development section. Download the rom and the Gapps
Download rom manager and flash clockworkmod recovery. Backup data
Put the rom and gapps in ur sdcard. Reboot into recovery by pressing volume down and power. Wipe data and cache. Select install zip from sdcard and flash both the rom and gapps
Reboot.
See the link in my "cm7 ics" thread in the Blade general for an ics look
Click to expand...
Click to collapse
A normal z4 root doesn't work google z4root modaco and then first result.
saaransh9 said:
A normal z4 root doesn't work google z4root modaco and then first result.
Click to expand...
Click to collapse
Is it true that cm7 gives you access to all 512 mb Ram?
Sent from a X8 using my thumbs
RomWiz said:
Is it true that cm7 gives you access to all 512 mb Ram?
Sent from a X8 using my thumbs
Click to expand...
Click to collapse
it depends on your phone if u got gen2 and have a european blade then yes else no.
u can convert gen1 to gen2 using a tpt if u have a european blade
saaransh9 said:
it depends on your phone if u got gen2 and have a european blade then yes else no.
u can convert gen1 to gen2 using a tpt if u have a european blade
Click to expand...
Click to collapse
I live in sweden
How Do i se if it is gen1 or gen2?
Sent from a X8 using my thumbs
RomWiz said:
I live in sweden
How Do i se if it is gen1 or gen2?
Sent from a X8 using my thumbs
Click to expand...
Click to collapse
Ask Mr pigfish from play store
saaransh9 said:
Ask Mr pigfish from play store
Click to expand...
Click to collapse
Okey
Thanks
Sent from a X8 using my thumbs
saaransh9 said:
Ask Mr pigfish from play store
Click to expand...
Click to collapse
While Mr. Pigfish is widely preferred, Blade Buddy also tells u the Blade version
QuantumFoam said:
While Mr. Pigfish is widely preferred, Blade Buddy also tells u the Blade version
Click to expand...
Click to collapse
Okey
One last question can z4root make a bootloop or brick?
Sent from a X8 using my thumbs
Everything can happens but with low possibility...
RomWiz said:
Okey
One last question can z4root make a bootloop or brick?
Sent from a X8 using my thumbs
Click to expand...
Click to collapse
no
Gnaver said:
Everything can happens but with low possibility...
Click to expand...
Click to collapse
saaransh9 said:
no
Click to expand...
Click to collapse
Good to know
Sent from a X8 using my thumbs
Related
here ya go
http://download.cyanogenmod.com/?type=RC
we are the second link, fascinatemtd
this is just one more step closer to official cm9. all props go to the cyanogen team for all their hard work
Allright!! Downloading as soon as the site comes back.
CM9 kangs start tonight. .
Sent from my Glitched AOKP Unicorn.
im not sure why they even released a 7.2 this late in the game with cm9 dev in full force, but hey im not complaining.
droidstyle said:
im not sure why they even released a 7.2 this late in the game with cm9 dev in full force, but hey im not complaining.
Click to expand...
Click to collapse
7.1 is buggy for some devices? In my experience, its kind of buggy for the Fascinate.
Foxcow said:
7.1 is buggy for some devices? In my experience, its kind of buggy for the Fascinate.
Click to expand...
Click to collapse
I think you missed the point...
Because some devices that has cm7 won't necessarily get cm9???
Sent from my SCH-I500 using XDA App
yohobojo said:
Because some devices that has cm7 won't necessarily get cm9???
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
yeah. they released a flow chart with percentages a week ago. if i find ill link. but based on the flow chart we have ~66% chance of official cm9 (do we really need it though?) we already have a AOKP, Gummy, MIUI v4, nightly kangs, THS and Codename (most of these roms from Stephen.k.spear thanks btw) so in all reality, would the world end with out offic cm9?
droidstyle said:
I think you missed the point...
Click to expand...
Click to collapse
not really, cm9 is not everyones style. i personally dont really enjoy ICS. what i mean is its not all its cracked up to be. Google hypes the **** out of their software and i dont blame them but i think they did it right with gb and ill probably be running this or the skang nightlies until i upgrade in may
antp121 said:
yeah. they released a flow chart with percentages a week ago. if i find ill link. but based on the flow chart we have ~66% chance of official cm9 (do we really need it though?) we already have a AOKP, Gummy, MIUI v4, nightly kangs, THS and Codename (most of these roms from Stephen.k.spear thanks btw) so in all reality, would the world end with out offic cm9?
Click to expand...
Click to collapse
Not if I have anything to say about it. We'll get added at some point. Enjoy my kangs until then.
Considering sbrissen just added the files needed to builds from CM9 directly I'm guessing he's planing on a merge....
Sent from my Glitched AOKP Unicorn.
yohobojo said:
Because some devices that has cm7 won't necessarily get cm9???
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Exactly what I was going to say. For the devices that won't be moving past CM7, its nice to see some of the bugs addressed.
I just can't believe people are still on GB.
Sent from my Glitched AOKP Unicorn.
Stephen.k.spear said:
I just can't believe people are still on GB.
Sent from my Glitched AOKP Unicorn.
Click to expand...
Click to collapse
this!!!!!!!!!!!!!!!
Eh, lots of people just prefer that version of the OS.
Sent from my SCH-I500 using Tapatalk
so i know you are probably going to beat me up for this but ive already dwonloaded all the files to install the CM7 but ive read thousands of times that i need to do a nand backup of the oiginal OS but when i get into the recovery mode i dont have the backup/restore option.... where is my problem? thanks for your help...
andreshbozo said:
so i know you are probably going to beat me up for this but ive already dwonloaded all the files to install the CM7 but ive read thousands of times that i need to do a nand backup of the oiginal OS but when i get into the recovery mode i dont have the backup/restore option.... where is my problem? thanks for your help...
Click to expand...
Click to collapse
"cwm 2.5.x all" is only recovery that backs up stock rom to my knowledge. You will need to flash it to make your backup then flash "cwm fixed for cm7" to proceed with cyanogenmod.
Sent from my SCH-I500 using xda premium
mezster said:
"cwm 2.5.x all" is only recovery that backs up stock rom to my knowledge. You will need to flash it to make your backup then flash "cwm fixed for cm7" to proceed with cyanogenmod.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
Out of curiosity, can that be flashed from Rom Manager?
Foxcow said:
Out of curiosity, can that be flashed from Rom Manager?
Click to expand...
Click to collapse
run far far away from rom manager!! manually flash the file in cwm recovery.
droidstyle said:
run far far away from rom manager!! manually flash the file in cwm recovery.
Click to expand...
Click to collapse
Thanks! When its too good to be true...
mezster said:
"cwm 2.5.x all" is only recovery that backs up stock rom to my knowledge. You will need to flash it to make your backup then flash "cwm fixed for cm7" to proceed with cyanogenmod.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
i downloaded the cwm 3.0.0.8 zip file and acording a video on youtube all i have to do is to use the root explorer, rename the recovery from the bin folder and copy there the one i downloaded... so far so good but when i go onto the recovery mode y select the backup/restore option it shows me a buch of errors "E: cant mount cache/partition" and cant open the same path... the thing is that the .zip i downloaded with the recovery has like 4 folders "META-inf" "sbin" "res" "etc"... im new in this whole thing :S please be patient with me...
hi,
i have a dell xcd 35 with stock 2.2 gen 2 non rooted.
i want to install custom rom on this device i have read
thread at modaco link below
http://android.modaco.com/topic/3357...r-gen2-device/
but i want to know how to revert back to stock 2.2 with all the things same as when it was out of the box (i.e. non rooted with stock recovery not cwm)
as i want warranty of my handset so it should be same like before.
in the thread at modaco about installing custom rom on gen2 blade there is a topic "reverting back to stock" in this the told to flash the stock rom zip which we have backed up or a fresh stock 2.2 which is in roms section BUT MY QUESTION IS THAT AFTER FLASHING STOCK ROM ALSO WE CANT GET THE STOCK RECOVERY INSTALLED AND IT NOT BECOME LIKE OUT OF BOX.? plzzzz tell me how to get back to the same state when it was out of the box, is there any other method of flashing AND PLZZ TELL ME ABOUT TPT ALSO i am a noob... plzzz help i want how to get back to stock with stock recovery as i need my warranty.
thanks in advance
Like I told you in the pm. Use clockwork mod and flash the file I linked you to in my message. Then use z4root to unroot and uninstall z4root. That's all.
The stock rom I linked you to has stock recovery in it.
Sent from my Blade using XDA app
thnx man for opening the thread i'll really appreciate if u do that always.
its quite simple if u just flash the stock rom then it will be back to stock absolutely stock with stock recovery and boot animation and rom with no root.
---------- Post added at 01:11 PM ---------- Previous post was at 01:09 PM ----------
karthiknr said:
Like I told you in the pm. Use clockwork mod and flash the file I linked you to in my message. Then use z4root to unroot and uninstall z4root. That's all.
The stock rom I linked you to has stock recovery in it.
Sent from my Blade using XDA app
Click to expand...
Click to collapse
the stock rom is already unrooted and has the stock recovery atleast the one i use is so.
saaransh9 said:
thnx man for opening the thread i'll really appreciate if u do that always.
its quite simple if u just flash the stock rom then it will be back to stock absolutely stock with stock recovery and boot animation and rom with no root.
---------- Post added at 01:11 PM ---------- Previous post was at 01:09 PM ----------
the stock rom is already unrooted and has the stock recovery atleast the one i use is so.
Click to expand...
Click to collapse
Weird. When I first installed z4root on my stock dell 2.2,there was an unroot option as well. The links I've posted in my thread about stock roms have stock recoveries in them. Dono bout root though.
Sent from my Blade using XDA app
karthiknr said:
Weird. When I first installed z4root on my stock dell 2.2,there was an unroot option as well. The links I've posted in my thread about stock roms have stock recoveries in them. Dono bout root though.
Sent from my Blade using XDA app
Click to expand...
Click to collapse
no it is unrooted because it doesn't have super user never tried z4root
thanx saaransh9 and karthiknr for your suggestions and clearing my doubt. plzz can you tell me one thing also, i am currently on stock 2.2 and want to install custom rom, plzz tell me which rom is best by performance and stability wise in the development section.
how about cm7 kang rom
and which buuild should be used, or any other rom which has great look also.
nitin kumar said:
thanx saaransh9 and karthiknr for your suggestions and clearing my doubt. plzz can you tell me one thing also, i am currently on stock 2.2 and want to install custom rom, plzz tell me which rom is best by performance and stability wise in the development section.
how about cm7 kang rom
and which buuild should be used, or any other rom which has great look also.
Click to expand...
Click to collapse
i use cm7.2 burgerz 29 feb with beats and new adreno libs and bravia engine.
and its awesome for me and my other rom is cm9 coldfusion which is getting better day by day
i have installed z4root 1.3.0 and doing permanent root but when i install adfree from market and open it it says no root access.
plzz help to resolve this issue
i also tried temporary root but it is also not properly working.
is this ver. correct or some other version should be used. plz give me link of a version.
There have been some people facing issues with z4root.
Guess you'll have to root it via adb
Sent from my Blade using xda premium
now somehow z4root worked and now phone is rooted and apps asking for superuser permission i have used rom manager to flash cwm, is this fine or i have 2 use blade recovery manazer.
nitin kumar said:
now somehow z4root worked and now phone is rooted and apps asking for superuser permission i have used rom manager to flash cwm, is this fine or i have 2 use blade recovery manazer.
Click to expand...
Click to collapse
No its fine now just make a nandroid and flash your favorite ROM don't forget to wipe everything I mean data and cache partition.
saaransh9 said:
No its fine now just make a nandroid and flash your favorite ROM don't forget to wipe everything I mean data and cache partition.
Click to expand...
Click to collapse
thanks mate, I have installed Burgerz 20mar build rom, now i am seeing that rd march update also arrived is it good to update to rd march update and does 20 march update have the 'bravia engine' or i have to flash it manually.
aman.droid said:
thanks mate, I have installed Burgerz 20mar build rom, now i am seeing that rd march update also arrived is it good to update to rd march update and does 20 march update have the 'bravia engine' or i have to flash it manually.
Click to expand...
Click to collapse
it has a bug if u leave your wifi on then the phone doesn't sleep and battery drains.
otherwise its awesome.
or else use 29 feb
take bravia engine from my signature and flash it
@saaransh9
Do u know where to find softbuttons option on 20th March release?
Sent from my Blade using xda premium
QuantumFoam said:
@saaransh9
Do u know where to find softbuttons option on 20th March release?
Sent from my Blade using xda premium
Click to expand...
Click to collapse
i dont use 20 march but they should be under cm settings<tablet settings
something like that
No. Those are the tablet soft buttons. The changelog says he added normal soft buttons
Sent from my Blade using xda premium
which build of kang dev. and wbaw kernal is best plzz provide link here. i m currently on burgerz 20th march build with the default kernal in this rom
plz help
Burgerz kang is supposedly the best. It's available on the burgerz website. Best add ons are wbaws kernel, adreno 200 libs and beats audio. The links are in saaransh9's signature
Sent from my Blade using xda premium
QuantumFoam said:
Burgerz kang is supposedly the best. It's available on the burgerz website. Best add ons are wbaws kernel, adreno 200 libs and beats audio. The links are in saaransh9's signature
Sent from my Blade using xda premium
Click to expand...
Click to collapse
it doesn't have wbaw's kernel link because i find it the reason behind my battery drain
Okay then.
Here's the link for wbaws kernel
https://www.box.com/shared/eb3e2b572c14244dbc84
And its source code
https://github.com/John-Kenney/zte-turies-35
Sent from my Blade using xda premium
Hi all
I have no many experience with this phone. Mine is Gen2, rooted stock GingerBread. I am seeking for an overclockable kernel working with this rom and circle battery mod. I tried some mods, but they stucks this phone
So please post the wanted files or link. Many thanks
Sent from my U8800pro using xda premium
Install CyanogenMod 7 or 9. They are overclockable
QuantumFoam said:
Install CyanogenMod 7 or 9. They are overclockable
Click to expand...
Click to collapse
Sorry, i dont like CM. I prefer stock with basic tweaks.
Sent from my U8800pro using xda premium
U tried wbaws kernel?
QuantumFoam said:
U tried wbaws kernel?
Click to expand...
Click to collapse
No, i dont know which kernels are available for this phone and how to flash them. This zte is phone of my wife. On my personal huawei i only replace the boot.img in root explorer and it is all. In the zte is no such file. So please post the link or file and how to flash. Many thanks.
Sent from my U8800pro using xda premium
On the first page of this thread there are links to two kernels. Just flash from recovery
forum.xda-developers.com/showthread.php?t=1485445
thanks for your help. kernels are not working, but new adreno drivers yes.
linomaniac said:
thanks for your help. kernels are not working, but new adreno drivers yes.
Click to expand...
Click to collapse
because they are meant for cm try ones from swedish snow or the rom itself it is based on stock 2.3.5
Moved to General. Please post in the correct forum.
Cheers.
i installed SwedishSnow RLS7, but there is no sim working. No signal, not connected radio. When i switch to airplane mode ON, it becomes inactive and i cannot swich it off. When i recovered via cwm back to official 2.3.5 and tried to recover the boot from SS (because of unlocked kernel), it freezes at ZTE logo. So the official does not work with SS kernel. I am so unhappy
linomaniac said:
i installed SwedishSnow RLS7, but there is no sim working. No signal, not connected radio. When i switch to airplane mode ON, it becomes inactive and i cannot swich it off. When i recovered via cwm back to official 2.3.5 and tried to recover the boot from SS (because of unlocked kernel), it freezes at ZTE logo. So the official does not work with SS kernel. I am so unhappy
Click to expand...
Click to collapse
u got your blade with gingerbread???
what your gen is it gen??
saaransh9 said:
u got your blade with gingerbread???
what your gen is it gen??
Click to expand...
Click to collapse
Its gen3 Blade
Have you TPTed your phone to gen2? Have you an IMEI? (Look in settings). I have read something on modaco where if a gen3 phone is tpt to other gen, it will loose her network (basebande probleme?) But im not very certain...
Send from my Blade!
Gokh said:
Its gen3 Blade
Have you TPTed your phone to gen2? Have you an IMEI? (Look in settings). I have read something on modaco where if a gen3 phone is tpt to other gen, it will loose her network (basebande probleme?) But im not very certain...
Send from my Blade!
Click to expand...
Click to collapse
Currently in the GB stock rom the IMEI is present. Pigfish says Gen2 - sold with Froyo, thats true. I only want to use an oc kernel, not whole custom rom, because they are not fully localized. This phone uses my wife and she likes our native language. I use a huawei u8800pro and the speed difference is huge. I hope that 100 mhz up helps her a little bit.
Sent from my U8800pro using xda premium
del...
I brought Idea Blade it has 256 MB RAM every ICS Roms require more Ram Can any one suggest a slim ICS Rom which fits for my mobile
Can any one suggest any ROM which fits my IDEA BLADE
You got a T-Mobile device? The original (Gen1) T-ROM is awful, hiding the half of RAM, try to make Gen2 - if you have T dev, use the T's .exe updater. All ZTE Blade have 512MB RAM.
Sent from my ZTE Blade using XDA app
doncortio said:
You got a T-Mobile device? The original (Gen1) T-ROM is awful, hiding the half of RAM, try to make Gen2 - if you have T dev, use the T's .exe updater. All ZTE Blade have 512MB RAM.
Sent from my ZTE Blade using XDA app
Click to expand...
Click to collapse
Dude. Read carefully. Idea Blade. Its not T-Mobile
doncortio said:
You got a T-Mobile device? The original (Gen1) T-ROM is awful, hiding the half of RAM, try to make Gen2 - if you have T dev, use the T's .exe updater. All ZTE Blade have 512MB RAM.
Sent from my ZTE Blade using XDA app
Click to expand...
Click to collapse
And,all Blades don't have 512mb RAM.
Sent from my LT26i using xda premium
Oh... the man studies until his death
The 256 RAM Blade is new for me.
Sent from my ZTE Blade using XDA app
hemanthsai10 said:
I brought Idea Blade it has 256 MB RAM every ICS Roms require more Ram Can any one suggest a slim ICS Rom which fits for my mobile and any other godd roms with best battery Backup
Any one help me by sending suggestions to
Click to expand...
Click to collapse
As Moderator
Word to the wise. Posting your email address on a forum is usually a bad idea. That being said I dislike the "best" idea for a rom/kerne/app and will ask you to not make threads to that regard. I will not lock this thread because the ram inquiry.
As a Android phone user.
It will be hard pressed to get ICS running on 256MB of ram. My i897 runs on total 512MB (~390MB as usable ram) 1Ghz cpu (200mhz bus & GPU) OC'd to 1.392Ghz (232mhz bus&GPU) and its no where as smooth as a dual core phone. I can't imagine how a 256MB and 800mhz cpu would fair with ICS. Like everything it will probably run but how well?
I have tried ics on my Idea Blade (256mb ram). It is smooth but lots of FCs. Not stable at all. The launcher always restarts when i return from an app. Had to revert back to cm7.
Sent from my Blade using XDA
ROM
yash_p90 said:
I have tried ics on my Idea Blade (256mb ram). It is smooth but lots of FCs. Not stable at all. The launcher always restarts when i return from an app. Had to revert back to cm7.
Sent from my Blade using XDA
Click to expand...
Click to collapse
which ROM r u using
hemanthsai10 said:
which ROM r u using
Click to expand...
Click to collapse
CM7 Nightly
yash_p90 said:
I have tried ics on my Idea Blade (256mb ram). It is smooth but lots of FCs. Not stable at all. The launcher always restarts when i return from an app. Had to revert back to cm7.
Sent from my Blade using XDA
Click to expand...
Click to collapse
Dear Sir,
I have an idea blade, rooted, installed clockwordmod. But clockwork recovery fails to backup stock rom, and i cant do factory reset also can u help?
thank you
idea blade
ramubhat said:
Dear Sir,
I have an idea blade, rooted, installed clockwordmod. But clockwork recovery fails to backup stock rom, and i cant do factory reset also can u help?
thank you
Click to expand...
Click to collapse
same happens with me.
Have you tried cm7 then reverted back to origional rom using backup?
ramubhat said:
Dear Sir,
I have an idea blade, rooted, installed clockwordmod. But clockwork recovery fails to backup stock rom, and i cant do factory reset also can u help?
thank you
Click to expand...
Click to collapse
Switch off your mobile. Then press home+volume up+power button combination while restrting the Idea Blade mobile. Then you will be in CWM Recovery screen of Idea Blade. From there you can take backup of your current stock ROM. It worked for me.
Hello, so I am new user of Huawei U8800 and I succeded to install Aurora ICS on it, but now I would like to try CM7. But I don't know how to get back to Froyo and then from Froyo to CM7 (as it says in CM7 install instructions?
Thanks for help.
Just format system and data and install over it.
Sent from my Desire HD using xda premium
SEK610i said:
Hello, so I am new user of Huawei U8800 and I succeded to install Aurora ICS on it, but now I would like to try CM7. But I don't know how to get back to Froyo and then from Froyo to CM7 (as it says in CM7 install instructions?
Thanks for help.
Click to expand...
Click to collapse
If you want to install CM7 (.32) you need to downgrade to froyo but if you want (.35) you can install it over Aurora.
Sorry but can I ask why to revert back to froyo from Aurora?
Somcom3X said:
Just format system and data and install over it.
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
That would not work.
Find official froyo
Unzip it and put into your sdcard like /dload/update.app
Close your phone.
Press vol+ vol- and power and keep until update screen.
After the successful froyo downgrade root it.
Copy cwm
Install cm7.
That simple.
Sent from my U8800
entrapmen said:
That would not work.
Find official froyo
Unzip it and put into your sdcard like /dload/update.app
Close your phone.
Press vol+ vol- and power and keep until update screen.
After the successful froyo downgrade root it.
Copy cwm
Install cm7.
That simple.
Sent from my U8800
Click to expand...
Click to collapse
This only need for Cm7.32
If you want to CM7.35, just install on top aurora with full wipe
Mahdial said:
If you want to install CM7 (.32) you need to downgrade to froyo but if you want (.35) you can install it over Aurora.
Sorry but can I ask why to revert back to froyo from Aurora?
Click to expand...
Click to collapse
I won't downgrade to Froyo, I just wan't to try CM7, and in CM7 install instructions downgrading to Froyo is mentioned, so I tought I will have to downgrade to Froyo and then install Cm7.
Thanks for all answers, will try installing CM7 35 right now.
EDIT:Can someone link me to CM7 .35 thread?
Sent from my U8800 using Tapatalk 2
There are atleast three dev topics in the forum. One from genokolar and if i am not wrong there is a kernel dev for ezet's cm7.2 .32 by Paul*.
But... All of them are onhold or ended dev. And they all have bugs. So. What i am trying to say is if you want bug free cm7 then you should try ezet's .32
Sent from my U8800
entrapmen said:
There are atleast three dev topics in the forum. One from genokolar and if i am not wrong there is a kernel dev for ezet's cm7.2 .32 by Paul*.
But... All of them are onhold or ended dev. And they all have bugs. So. What i am trying to say is if you want bug free cm7 then you should try ezet's .32
Sent from my U8800
Click to expand...
Click to collapse
Installed .32 yesterday, and I am really happy with it. Thanks everone for helping me. :good:
SEK610i said:
Installed .32 yesterday, and I am really happy with it. Thanks everone for helping me. :good:
Click to expand...
Click to collapse
What's the main differences between Aurora and CM7.2 in your opinion?
Cause I want to go to Aurora though.
Mahdial said:
What's the main differences between Aurora and CM7.2 in your opinion?
Cause I want to go to Aurora though.
Click to expand...
Click to collapse
Sorry, for late answer...I didn't see any major differences...actualy I was more pleased with aurora, but I always got atleast 2 reboots a day on Aurora, so thah is the reason I tried CM7.
Now I have one more question...How do I get to stock GB now? I changed recovery.img when I was installing CM7, so do I need to change recovery.img to stock, and then "update" with official GB, or can I just directly "update" to official GB without changing recovery.img to stock before?
Thanks for your help
SEK610i said:
Sorry, for late answer...I didn't see any major differences...actualy I was more pleased with aurora, but I always got atleast 2 reboots a day on Aurora, so thah is the reason I tried CM7.
Now I have one more question...How do I get to stock GB now? I changed recovery.img when I was installing CM7, so do I need to change recovery.img to stock, and then "update" with official GB, or can I just directly "update" to official GB without changing recovery.img to stock before?
Thanks for your help
Click to expand...
Click to collapse
Update with dload folder of the GB, it will give you the stock recovery after completed the update.
Sent from my U8800 using xda app-developers app