[Q] Cant Flash CM9 Nightly??? - Defy Q&A, Help & Troubleshooting

1st of all im from 2.1 eclair.. then i go and flash .sbf for froyo 2.2.2 re-release version
http://forum.xda-developers.com/showthread.php?t=1093352
after that i root it and install cwm then i follow the steps to install nightly
http://forum.xda-developers.com/showthread.php?t=1432100
i dl this http://defy.wdscript.fr/defy-cm9/ [CM9-NIGHTLY-120416-Defy.zip]
m.cfa.aero/misc/CM7_Kernel-signed.zip
and i followed all the steps
How To Flash ICS(Defy Builds)
1:Head Over To Stable recovery
2:Wipe Data
3:Install ZIp from SD Card
4:Select ICS(Defy) .zip
5:Flash
6:Flash CM7 Kernel
7:Clear Cache and Dalvik Cache
then after it reboot, its not CM9 ROM but Froyo ROM 2.2.2..
whats wrong?

Are you sure that you dont do a Wipe Data/chache?

Make sure you are using SndInitDefy_2.3.apk. I used version 1.9 and had the exact same problem you had.
Hope this helps.

Related

[Q] [help]how to flash cm7 kernel(i wanna downgrade from cm9 to cm7 how)?

hi,
can neone temme how to flash a cm7 kernel provide me wid d links and temme which recovery to use(2nd init,goapks or cwm?
d.o.doubleg said:
hi,
can neone temme how to flash a cm7 kernel provide me wid d links and temme which recovery to use(2nd init,goapks or cwm?
Click to expand...
Click to collapse
Is it possible ?
i have not tried installing cm9 yet. but from what i read, you just simply reboot into recovery and do the following to downgrade to cm7:
1. wipe data and cache.
2. go into advanced and wipe dalvik cache.
3. go back, and select install zip from sd.
4. select zip from sd, and choose cm7 stable zip and flash. the full stable rom already contains the cm7 kernel. no need to flash separately.
5. again, select gapps zip and flash.
6. reboot.
if you just want to flash cm7 kernel because you want to install a nightly build (without kernel), just flash cm7-kernel-signed.zip, follow by the nightly zip, in step 4.
Yep thats right
Motorola Defy CM7 RC 1.5 OC 1GHz
You need to flash the froyo kernel first
1) Flash froyo sbf (stock rom)
2) root using superoneclick, install sndinitdefy
Then reboot into custom recovery and follow the below steps
jh20 said:
i have not tried installing cm9 yet. but from what i read, you just simply reboot into recovery and do the following to downgrade to cm7:
1. wipe data and cache.
2. go into advanced and wipe dalvik cache.
3. go back, and select install zip from sd.
4. select zip from sd, and choose cm7 stable zip and flash. the full stable rom already contains the cm7 kernel. no need to flash separately.
5. again, select gapps zip and flash.
6. reboot.
if you just want to flash cm7 kernel because you want to install a nightly build (without kernel), just flash cm7-kernel-signed.zip, follow by the nightly zip, in step 4.
Click to expand...
Click to collapse
Do you really need to flash froyo kernel first?
I have to come back to CM7 and do I really need to flash SBF first? Or can I simply flash CM7 with kernel package?
pravarth said:
You need to flash the froyo kernel first
1) Flash froyo sbf (stock rom)
2) root using superoneclick, install sndinitdefy
Then reboot into custom recovery and follow the below steps
Click to expand...
Click to collapse
Please, if you don't know what you are talking about, don't mislead people. If I only need to change a single broken brick in the wall on the second floor, do I need to ruin the whole house and rebuild it?
No need to flash SBF. Just go into recovery, wipe data/cache and dalvik cache, flash CM7 kernel, flash CM7 build, flash gapps for CM, wipe cache and dalvik cache.
DONE!
As above is the right way I have done it lots of times.
defy cm7

CM7 to CM9

i upgraded my defy (red lens) to froyo. Then I installed CM72-111204.0310-nightly-defy.
Now I want to install CM90-120305-NIGHTLY-Defy.
Also I want to change the card. Should I change before or after the upgrade ?
And how to do the upgrade to cm9 ?
from: http://forum.xda-developers.com/showthread.php?t=1432100
Install guide (courtesy of nogoodusername):
A How to on flashing ICS(Defy Plus Builds)
1:Head over to Stable Recovery from boot menu
2:Wipe Data (Nandroid Backup Before Doing this [optional])
3:Install Zip from SD
4:Select ur ICS(DefyPlus) zip
5:FLash
6:Flash CM9 Kernel
7:Flash Gapps zip(On first page of ICS DeV thread)
8:Clear Cache and Dalvik Cache
How To Flash ICS(Defy Builds)
1:Head Over To Stable recovery
2:Wipe Data
3:Install ZIp from SD Card
4:Select ICS(Defy) .zip
5:Flash
6:Flash CM7 Kernel
7:Clear Cache and Dalvik Cache
FIrst Boot will take some time...
TO CLEAR YOUR CONFUSIONS ABOUT GB KERNEL ICS AND FROYO KERNEL ICS
I have seen lot of confused user out there asking about which kernel to flash and stuff... So here u go read below...
So our beloved Awsome Developers make two types of nightlies
1-For DefyPlus(Can Also be used on Defy(RedLens))
These are the GB/CM9 kernel builds
These are found under /cm9-nightly-defy+/ folder of the servers which we have
To install these you need to follow the TuT to install ICS Defy Plus Above...
Green Lens Camera Wont work on these(Correct me if I and wrong)
2-For Regular Defy(Do not work on Defy plus)
These are Froyo/CM7 kernel Builds
These are found under /CM9-Nightly-Defy/ folder of the servers which we have.
To install these follow the TuT to install CM9 ICS FOR Defy stated above
3-Well there is no 3rd build(There is The MileStone2 Port by Walter79,But now that we have camera on our builds that one is not usefull...)
So for installing ICS (CM9) I have to flash CM7kernel afterwards and I 'm working already with CM7!
That's very confusing for me.So I have to download the CM7 kernel and put it on my card first.
thanks a lot for the help.

[Q] problem with inastall rom

hi
i have motorola defy plus
and i do the "root gudie" and everythink is Ok
but when i do whast said there i "room flash " part
ist write me black screen "BL Err:A5,70,00,00,23"
I was look this guide and its says not install karenel it all
that Not dangerous to skip the part that say install karnel? (cm9 karnel) ?
sorry for my bad eng
http://forum.xda-developers.com/showthread.php?t=1540372
"flash zip (CM9-ICS-MR1-120305-jordan)***** DONT flash Kernel our you'll get Err:A5,70,00,00,23****"
anybody?
you will need to flash a new SBFusing RSD lite.
I used this SBF http://www.multiupload.nl/I52KOPDS8N
It should work unless you have flashed a higher version before hand. If you have installed a higher version then try these SBF and use one the same version you flashed before.
http://sbf.droid-developers.org/umts_jordanplus/list.php
Yes if you are installing ICS and following the defy+ guide dont flash the CM9 kernel.
If you want to install ICS then use this ROM http://defy-cm.net/CM9-NIGHTLY-120417-Defy+.zip Its the new epsylon one as I heard the Quarx has a few more issues not sure if the new build has sorted it out,
You can use the latest version of gapps found here http://goo.im/gapps/gapps-ics-20120422-signed.zip
Follow these instructions using the rom and gapps I linked but skip the flash CM9 kernel
A How to on flashing ICS(Defy Plus Builds)
1:Head over to Stable Recovery from boot menu
2:Wipe Data (Nandroid Backup Before Doing this [optional])
3:Install Zip from SD
4:Select ur ICS(DefyPlus) zip
5:FLash
6:Flash CM9 Kernel (SKiP THIS STEP!)
7:Flash Gapps zip(On first page of ICS DeV thread)
8:Clear Cache and Dalvik Cache

[Q] Motorola defy not booting!

I need help! The phone just doesn't boot up!
The device is with CM7.2 - Kernel 7.1jordan.
So, I tried to install CM10 - JB.
I've download the ROM and GAPS on my sd card, and follow tease instructions:
How To Flash Jelly Bean (Defy Builds)
1:Head Over To Stable recovery
2:Wipe Data
3:Install ZIp from SD Card
4:Select Jelly Bean rom (Defy) .zip
5:Flash
6:Flash JB Gapps zip
7:Clear Cache and Dalvik Cache
When I was done, the phone just doesn't start, my recovery is missing, I just don't have it...., I have just stock recovery witch doesn't work at all...
PLS HELP! TNX!
Just happened to me, easy fix. I'm using a defy for new years so don't mind me posting from a s3.
Just reflash a sbf in download mode (pwr + up)
Then re root using superoneclick.
Install 2ndint again .
Reflash cm10.
Enjoy the asop goodness
Feel free to thank if I helped
Sent from my GT-I9300 using XDA Premium HD app
Don't panic
Here, this should make things easy for you..
Step by step video guide :good:
Press thanks if this helped.

[Q] how do i downgrade from aurora to cm7?

hello everyone,yesterday i restored my phone to original state with this guide http://forum.xda-developers.com/showthread.php?t=1971266 ,then i installed cwm recovery via pink screen,and then through recovery i installed aurora v5,but i dont like it...how can i install cm7?
niggaswitcher said:
hello everyone,yesterday i restored my phone to original state with this guide http://forum.xda-developers.com/showthread.php?t=1971266 ,then i installed cwm recovery via pink screen,and then through recovery i installed aurora v5,but i dont like it...how can i install cm7?
Click to expand...
Click to collapse
If CM7 needs .32 Kernel then:
1. You need to install official 2.x ROM (http://click.xda-developers.com/api...ww.mediafire.com/download.php?0q4r99g2s3r421s)
2. Root and install CWM 5.x.x.x (CWM 5.0.2.7 recommended) via pink screen
3. Download CM7 and put in sd card
4. Wipe cache, data, dalvik cache and format System. (not boot)
5. Install.
Otherwise if CM7 needs .35 Kernel then you can start from step 3
Hope i can help!

Categories

Resources