Hi,
please could anybody help me? I run on Android 4.0.3 (NexusHD2-ICS-CM9 V1.5),
everything worked fine, but now, when I plug the USB cable to the PC, the phone is just charging.. I don´t see the USB notification icon on the top...
Related
helllo every body
i have a problem.i was updating my galaxy s through samsung kies..it got stucked after 30%..i disconnected it n then tried to update through odin multiloader..again it got stuck.i tried twice n it got stuck..now the phone goes to download mode..but cant be detected by computer..can any body help me plz
do you have another PC?
it's your windows + PC problem
best way is on WinXP 32bit on a good PC with working USB ports
some PC have buggy USB ports
unplug everything else from the USB ports except for mouse and keyboard (in case they are USB mouse/keyb)
Hello!
I've bought used Magic few days ago, and last night I wanted to root it, but when I try to connect it with computer - nothing! No USB icon on Magic, no new device on PC, just charging. I have original 1.6 android on it. Tried 4-5 different USB cables.
What can I do? Is there any way to fix it? Can I do rooting and flashin new rom from SD card, without usb?
turn on usb debugging in settings/applications/development
Already tried that. Doesn't help.
BUMP
Anybody?
could be a problem with your usb port on computer, try another port or try the phone on another computer and see what happens. also did you try the usb headphones ? are they working fine?
hello,
mi micro USB is not working propperly right now, for some reason it doesn´t charges correctly, it seems a little... "loose"... im currentl running CM 9 2012/05/26
and when it plugg it in the computer and manage it to start charging, it wont allow me to acces it as a mass storage device, in fact the computer wouldn´t recognize it at all!, any help!?
try another cable, or connecting it to other port after rebooting (usb musnt be connected)
Swyped off my Amazing Defy using ICS
happened with me too, got its motherboard replaced
crap... I`m rooted... so no warranty...
maybe in some repair shop of cellphones the will be able to replace it?
but.. did yours charged at all?
bacause mine does charges when appropietly connected... its just that sometimes it wont nad it will not allow me to get to the mass storage...
If your phone just charge but can't access to masive storage, look in the device manager , if you have a MTP device, your micro ubs port is fine, just try to install some stock rom.
it´s just that some times it doesn´t charges and I need to slowly start trying to adjust the micro USB port so it can charge... that´s why I say that it seems to be a little loose...
As well it will only charge when plugged into my XboX 360 or the computer (and some other devices) but not when plugged into the Stock charger... :S
Jkmoran said:
If your phone just charge but can't access to masive storage, look in the device manager , if you have a MTP device, your micro ubs port is fine, just try to install some stock rom.
Click to expand...
Click to collapse
now, exactly who should I look in the device manager if its MTP?
t
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A
USB not working for flash
Hi everyone, I came with a similar issue.
The massive storage USB connection is not working for me, plus I can't flash a stock rom,
Currently I'm in MIUI for defy (and it's the only option I am able to install), I tried to wipe data cache to install cyanogenmod 7 from recovery but it's not working, it get stuck in the boot logo. I want to install cyanogenmod because it is fast than MIUI jelly bean.
My idea is to flash the device, but with the usb not working Im stuck,
any ideas to solve this? or should i go to have the usb repaired?
GabrielMercado said:
Hi everyone, I came with a similar issue.
The massive storage USB connection is not working for me, plus I can't flash a stock rom,
Currently I'm in MIUI for defy (and it's the only option I am able to install), I tried to wipe data cache to install cyanogenmod 7 from recovery but it's not working, it get stuck in the boot logo. I want to install cyanogenmod because it is fast than MIUI jelly bean.
My idea is to flash the device, but with the usb not working Im stuck,
any ideas to solve this? or should i go to have the usb repaired?
Click to expand...
Click to collapse
If after a boot in bootloader (power+vol-up) and connecting to PC via usb cable nothing appear onto PC display 3 possibilities exist.
1. Usb cable is broken.
2. Pc have no usb driver foryour device (but even in this case a error message appear)
3. Usb connector or circuitry fron Defy is broken.
Search.
Hi mates !
Please have a look to this fix: http://forum.xda-developers.com/showthread.php?t=2516956
I haven't picture posting permissions right now, but should be fixed soon
CJPJ said:
Hi mates !
Please have a look to this fix: http://forum.xda-developers.com/showthread.php?t=2516956
I haven't picture posting permissions right now, but should be fixed soon
Click to expand...
Click to collapse
Yes, is OK your method but is a little dangerous if you not cover the cleaned pins with some resin. More safe is to use a toothbrush soaked in isopropyl alcohol or 98% ethylalcohol to clean the soldered pins.
del//
Hello,
Update: For solution see my last two posts here.
today I installed the current nightly from here: http://defy.wdscript.fr/defy-cm9/
on my red lens defy (standard, not plus) along with the CM7 kernel.
Before I had CM7.1 on it. Now I cannot connect the phone via USB anymore. Nothing does happen. The settings are all correct (usb debugging enabled etc.).
Could someone recommend a CM9 build for the red lens defy which has working usb mass storage/debug ? I would rather not want to test 100 builds for working usb :S
Thanks in advance!
tdlr said:
Hello,
today I installed the current nightly from here: http://defy.wdscript.fr/defy-cm9/
on my red lens defy (standard, not plus) along with the CM7 kernel.
Before I had CM7.1 on it. Now I cannot connect the phone via USB anymore. Nothing does happen. The settings are all correct (usb debugging enabled etc.).
Could someone recommend a CM9 build for the red lens defy which has working usb mass storage/debug ? I would rather not want to test 100 builds for working usb :S
Thanks in advance!
Click to expand...
Click to collapse
The USB has been working fine for me with Epsylon3's builds since.. as long as I can remember...
Does it charge via USB? i.e not in the computer?
pk92 said:
Does it charge via USB? i.e not in the computer?
Click to expand...
Click to collapse
It does charge via USB on PC and via USB on power adapter. This is not the problem. The problem is, that except charging nothing happens when I connect the phone to the PC. No notification where I could choose portals/mass storage etc.
No hardware popup under windows. On the PC I have Motorola drivers which were working fine with CM 7.1 just before.
tdlr said:
It does charge via USB on PC and via USB on power adapter. This is not the problem. The problem is, that except charging nothing happens when I connect the phone to the PC. No notification where I could choose portals/mass storage etc.
No hardware popup under windows. On the PC I have Motorola drivers which were working fine with CM 7.1 just before.
Click to expand...
Click to collapse
check in /system/app if Usb.apk is present or not?
generally its there in all cm9 build. ur case is strange.
brajesh.sharma87 said:
check in /system/app if Usb.apk is present or not?
generally its there in all cm9 build. ur case is strange.
Click to expand...
Click to collapse
Yes it is there.
Should the same usb drivers that worked for 7.1 still work under 9.x?
Edit: I updated the motorola drivers and nothing changed.
Also @pk92:
Which build are you running, maybe USB just doesn't work in the most recent nightlies ?
Edit: Tried 3 nightlies now. Not a single one does work. Tried two different pc's too. Reinstalled motorola drivers on both. I'm clueless.
Edit 2: Also, if I disable USB debug and then reboot, it is enabled again.
Edit 3: I just enabled ADB over network as this is the feature I need the most. I did connect via ADB while the phone was plugged in to USB and right when it connected via wifi windows popped up a hardware dialog along the lines "Unknown device, installation failed."
Edit 19638746278: After reinstalling the motorola drivers once again and reflashing the latest nightly the phone does not even charge anymore via PC USB. Instead, I just get the hardware popup with "unknown device" which reports that it's "not working".
I wonder about the suspicious timing and also I wonder why it says "usb device not recognized" (freely translated from german)
tdlr said:
Also @pk92:
Which build are you running, maybe USB just doesn't work in the most recent nightlies ?
Click to expand...
Click to collapse
I have the same issue - USB is dead (expect for charging)...
BUT: It worked yesterday evening and today morning, no idea what went wrong...
Same problem here.
All of the sudden it tries to install an MTP USB Device.
Which fails here.
For everyone with a RED LENSE defy (DON'T TRY WITH GREEN), here is a workaround:
Install the latest nightly for Defy PLUS along with the CM9 Kernel and reset battery stats. Nothing changes except USB does work again (at least for me).
Edit: see next post for MTP fix.
New post for clarity:
You then can fix the USB mass storage / MTP by following the instructions of the first post here:
http://forum.xda-developers.com/showthread.php?t=1432100&page=429
Hi everyone,
I'm trying to flash my tablet in order to get the calling option; but the problem is that when I turn it off to install its drivers on my pc, and when I connect it to the usb cable and the cable to the pc, the tablet's logo immediately appears and goes to the charging screen and this way I can't install its drivers. Does anyone have any ideas how I can solve this problem?
Many thanks in advance...