Hi Everyone first post since owning my i9000 since it came out and have followed xda since then. I would like to thank all the devs for everything they have done for this phone as the amount of improvements we have seen.. have been nothing short of brilliant... many thanks.
I am currently running aokp and it's excellent and also have cwm backups of other Roms on the phone. These are all Mtd Roms.
I have looked all over xda and it seems to me that we could convert the many good gingerbread roms to run in the new MTD partiton without reverting back to odin and wiping the phone only to have to do it all over again if we want try the many good custom and stock gingerbread Roms.
The flexability we would all gain from being able to flash other Roms without reverting back to odin would be great for everybody ... but there isn't a kernel to do this unfortunately.. I know I've looked back to the begining of all of the threads and can't find one ... or make one.
I have researched how these roms could be converted to run in the MTD partition and have a good idea how to pack them to run, I am not a rom chef or a dev so it would be just a re-pack. But the rom chefs would do this themselves if we had a touchwiz-MTD kernel made for this task.
I will not show how you go about re-packing a rom to run cause everyone would
try it without the necessary kernel and probably mess up their phone .. so best not.
Could we have one last missing -link kernel just to square the circle and run a stock samsung gingerbread rom in the MTD Partition... we would the be able to keep these as cwm backups and switch to any rom we like.
One last plea for the end of life galaxy S . . Great Phone
Related
I've been searching the forums to see if there is a custom kernel that you can flash over the stock rom. My friend did this to his motorola droid so that he could overclock the processor, so I assume someone has developed a similar kernel for the hero. Is this possible/does this kernel exist? I am aware that there are custom roms that allow for overlocking, but all I really want is a custom kernel.
Pick any kernel you want as far as I understand it. Of course, make a Nandroid first, then flash the new kernel. If you have any major problems with it, you can just restore the Nandroid, which will return you back to the stock kernel. I am about to embark on this same journey myself tonight. I'm going to use this one here - http://forum.xda-developers.com/showthread.php?t=705074 . Good luck to you in your endeavors.
you'll have to forgive if this is posted elsewhere but i haven't found it if it is, I'm new to this scene as i used to be used to the old apple stuff where i was quite happy jailbreaking etc. but now i have a nexus s and i'm quite happy with it and i've updated it to 2.3.3 no problems,
but now i'm a little confused/unsure. I am happy with the stock firmware but i'd like diffrent themes having looked around i see that to install them i need to install the CM7 rom but I've seen various roms some that need rooting and some that seem not to.
I've also seen a 2.3.3 rom thats a stock deodexed rom and a deodexed-voodoo-root rom. But whats the diffrence and which do i need etc.
sorry to sound like a complete idiot but this is all new to me and i'm trying to learn and get the best out of my phone, all advice is welcome
First off, all 3rd party ROMs will require root to "flash" (the android term for installing). You'll find a lot of information about all the ROMs, themes and kernels currently available for the NS here but the short answer to your question is that a deodexed rom is one which can be themed. If it has Voodoo, Netarchy, Trinity, or Honity listed what is being referred to is a custom kernel.
I'm also assuming you're not currently rooted and on that previous link you'll find a list of almost all of the rooting methods currently available (save for SuperBoot...I think I omitted that one by accident). Basically, all of the info you need is on that thread and if you have other questions I'm happy to help you but for now I think I've answered most everything.
Hi,
I'm currently using the stock DDJP2 rom in my SG3 (I5801) which sucks a lot (specially freezes a lot & poor battery life) . I've heard that there some stock ROMs which are very good in term of stability & battery performance. Now I want to use those ROMs and shortlisted three ROMS - XXJPM / XXJPN / XWJPF (which are for I5800). My main targets are:
1. Better stability & performance
2. Better battery performance
3. More customization option
4. Dont want to use any custom ROM
Can anyone suggest me a suitable ROM for me out these three mentioned above. Also please let me the know if there is any possibility of loosing my IMEI no after flashing with these roms (have seen that some people complained about problem who uses I5800 ROMs in I5801). If there is any possibility, can you let me know the precautions I should consider. I'm some confusion after going through the various posts and wanted to clear all of these before flashing.
Thanks in advance.
I've used the JPF, JPN and found several bug's in them.
I'm currently using Kyrillos' rom v5.3 (based on XXJPM) and is the best I've used, with all
the bug's I complained solved
to_sukanta said:
Hi,
I'm currently using the stock DDJP2 rom in my SG3 (I5801) which sucks a lot (specially freezes a lot & poor battery life) . I've heard that there some stock ROMs which are very good in term of stability & battery performance. Now I want to use those ROMs and shortlisted three ROMS - XXJPM / XXJPN / XWJPF (which are for I5800). My main targets are:
1. Better stability & performance
2. Better battery performance
3. More customization option
4. Dont want to use any custom ROM
Can anyone suggest me a suitable ROM for me out these three mentioned above. Also please let me the know if there is any possibility of loosing my IMEI no after flashing with these roms (have seen that some people complained about problem who uses I5800 ROMs in I5801). If there is any possibility, can you let me know the precautions I should consider. I'm some confusion after going through the various posts and wanted to clear all of these before flashing.
Thanks in advance.
Click to expand...
Click to collapse
This was my goal too, I flashed Lestatious ROM and I must say it's the most stable and fast ROM. Even without OC it's extremely fast!
Sooo, I suggest you to flash Lestatious!
Sent from my Galaxy 3 using Tapatalk
Lestatious + fugumod kernel without OC
Convert ext442 or ext444
Sent from my GT-I5800 using Tapatalk
I'd like to recommend you JPM. And this will be end if we talk about roms from your list.
But I hope you will consider one from Dharama's roms. I'm sure you will find a rom (from Dharama's roms of course) that fits expectations for a perfect rom. Personally I use Dharama's Clean Performance Rom - fast, light, stable, with easy installation, without useless stock applications.
I've also heard only good things about Dharam's Clean Rom.
I was on DDJP2 and had many probs so switched to XXJPM and I must say I am very satisfied with it. It too has some minor probs and the occassional freezing but it is one of the best among the stock ROMs.
As for losing your IMEI, yes there is a chance so backup your /efs folder and also create a efs.rfs file so that even if you lose your IMEI, you can get it back. You can find the tutorial in the roll up thread.
Another thing when flashing a ROM is remove the boot.bin, sbl.bin and logo.png files and your chances of a hard brick is virtually 0%. You can also download the ROMs without boot loaders from Kyrillos thread.
Cheers and happy flashing
Thanks everybody for your kind help.
As mentioned earlier, I would prefer a stock rom rather than a custom rom and hence decided to go for XXJPM. I've downloaded the stock XXJPM rom from the samfirmware site but I cant see any boot.bin and sbl.bin file though I'm able to see the logo.png file (which I guess the first pic after the phone startup). I can only see the folling files - cache.rfs, datafs.rfs, factoryfs.rfs, logo.png, modem.bin & zImage file.
Can anyone tell me which file should I remove before flashing this I5800 rom in my I5801. I've already copied the /efs folder to my sdcard so I can restore my IMEI no & MAC address if anything goes wrong. Is this enogh before flashing the XXJPM Rom. I dont have extensive knowledge in flashing. Please help.
Thanks in advance.
Jpm does not have the bootloader files so you need not remove any files
as i already said look in the roll up thread to backup imei
Thanks you all for your help.
I'm successfully able to flash the jpm rom in my sg3.
Hello,
I'm too about to do the same thing flashing 5800 Stock ROM on my 5801. So I wanted to know if you had problems with EMI and MAC after your flash.
Thanks
Hi All,
I am a new A500 owner and a long time Viewsonic G Tablet owner; I know why I put a Custom Rom on the G Tablet (Stock Rom Sucked and VS dropped support). However after playing with my new A500 for the last week I really can see no reason so far to put a custom rom on this tablet.
The stock rom rooted and a few extras added/fixed like...
GPS Fix
NTFS Mount
Rooted
CWM Added
have really made this a very stable and very effective rom. I have been reading through the forum and I see a significant number of custom roms out there. I am sure they are there for a reason however for the life of me I can not determine why I would want to install any of them. I do also understand that I am coming late to the game on this tablet as I am sure these were probably developed to fix deficiencies in the stock rom when the tablet was first released.
So can someone explain to me why I would want to switch to a custom rom today given the stability and fixes available for the stock rom?
This is not meant to be a dig on any individual, group or any dev of these roms; I know these folks do an outstanding job and I appreciate every single one of them. However for someone new to this tablet it would be great to know what makes the custom roms better than what I already have with the stock/fixed rom I am running. I am currently running;
Android Version: 3.1
Kernel Version: 2.6.36.3
Build Number: Acer_A500_4.010.11_COM_GEN2
This is a sincere question and I would appreciate not getting flamed or bashed for asking. This is in the Q&A section so I am hoping this is the right place to get the answers I am seeking.
" The only way to learn is to ask... so I am asking "
To me I think everyone installs custom roms for all diffrent reasons. Each rom has its own benefits and restrictions. I have tried a few and always go back to stock.
Good luck and flash with great Caution
erica_renee said:
To me I think everyone installs custom roms for all diffrent reasons. Each rom has its own benefits and restrictions. I have tried a few and always go back to stock.
Good luck and flash with great Caution
Click to expand...
Click to collapse
Hi Erica Renee,
Thank you for the quick reply... I was just not sure if there was a relevant issue that would persuade me to move from my stock rom to a custom one. I very much appreciate your response!!!
Rick
I'm coming from a Viewsonic Gtablet, and with the gtablet a custom rom was a must, here with the iconia I don't see any advantage to use a custom rom, Android 3.1 has everything I wanted. I only rooted it for ad-hoc support, but barely I use the ad-hoc, is only for emergencies, besides that, even rooting is not really necessary. Android OS backups all application settings, so each time I uninstall and reinstall an application, my former settings are there.
Just enjoy your Iconia
Frankly, I haven't felt the need to flash a custom ROM to the A500. I did root it to be able to use certain apps.
I have tried a variety of ROMs and kernels on my HTC EVO 4G, but that's because stock Froyo and even stock Gingerbread is boring. I think stock Honeycomb looks and performs great. It makes me really look forward to Icecream Sandwich.
I did add ADWLauncher to my A500, so maybe that's another reason why I haven't felt the need to flash a custom ROM.
i find myself in the same boat...
Running stock 3.1, rooted, cwm running - quite happy.
If you want to take it a step further, install Richardtrip's custom kernal and SetCPU and you will be amazed.
entropy.of.avarice said:
Running stock 3.1, rooted, cwm running - quite happy.
If you want to take it a step further, install Richardtrip's custom kernal and SetCPU and you will be amazed.
Click to expand...
Click to collapse
Hi entropy.of.avarice,
Thank you for the feedback, it is truly appreciated! I would not mind installing the new kernel as long as I knew for sure it would not break all that works well on my tablet right now.
Still on stock since I got mine - though I have since rooted - I'm not really making any use of it, only for file permissions and dropping boot animations onto the folder directly rather than through ADB.
I shopped around some of the ROM's floating around here and other that a few of the Touchwiz UI functions from Galaxy, [I don't even think it's supported or still available right now] there's nothing out there that would add to my experience in any appreciable way to risk going through all that [and back again] when I want to.
Stock is stable, runs smooth and fast and is supported if something ****s up and that is all I need - my life doesn't live and breath by the tablet so it's perfect for what I need it to be and what I need it to do.
I am using self-cooked official honeycomb 3.2 ROM (rooted, ad-hoc fix, etc)
with self-compiled 3.2 kernel, OC and apply different kind of fixes & patches.
Installing custom ROM & kernel is the act of tailor making your own OS.
It is why android is so attractive and additive.
Whay a non-stock ROM?
There are about as many answers to this as there are ROMs.
I have CWM / Recovery / Taboonay 2.0 w/ richardtrip's OC-able kernel (oc'd to 15000) and the tablet is Super Snappy! It has ad hoc support for tethering to my phone via WiFi, no random wake ups, Netflix with no broken cameras, Good GPS lock (after a bit of futzing...)
I was originally just gonna put 3.2 on there to experiment with and flash back after playing with it, but I got REALLY lucky. Did a FULL CWM backup and just flashed the ROM & Kernel over my existing ROM without wiping and...it just worked without me having to redo everything. So I just kept going..
I'd say at this point on the tablet no one REALLY needs 3.2, but a few of the modded kernels out there fix a number of sore spots that I wish ACER would just take care of...
I love our DEVS!
So...Up to you! But I currently LOVE taboonay 2.0 and the RT kernel...No issues at all for me...
(p.s. I still have two preceding backups of a couple of states of working 3.1 on my SD card that are 3 weeks apart that function wonderfully Just In Case! so, yeah..nothing really to lose by playing and testing...)
Why a non-stock ROM?
There are about as many answers to this as there are ROMs.
I have CWM / Recovery / Taboonay 2.0 w/ richardtrip's OC-able kernel (oc'd to 15000) and the tablet is Super Snappy! It has ad hoc support for tethering to my phone via WiFi, no random wake ups, Netflix with no broken cameras, Good GPS lock (after a bit of futzing...)
I was originally just gonna put 3.2 on there to experiment with and flash back after playing with it, but I got REALLY lucky. Did a FULL CWM backup and just flashed the ROM & Kernel over my existing ROM without wiping and...it just worked without me having to redo everything. So I just kept going..
I'd say at this point on the tablet no one REALLY needs 3.2, but a few of the modded kernels out there fix a number of sore spots that I wish ACER would just take care of...
I love our DEVS!
So...Up to you! But I currently LOVE taboonay 2.0 and the RT kernel...No issues at all for me...
(p.s. I still have two preceding backups of a couple of states of working 3.1 on my SD card that are 3 weeks apart that function wonderfully Just In Case! so, yeah..nothing really to lose by playing and testing...)
I rooted to gain performance. Taboonay and Richards kernel have given me a huge performance increase, no more lag.
Sent from my A500 using XDA Premium App
Don't change unless you don't have a life and you want to spend all your hours figuring out what is wrong, have tried them all and stock is less head ake.
I just bought a new i9000 and I want to upgrade it to the latest OS possible (hope ICS 4.0 is available)..
I am REALLY a beginner in this..so please I need a tutorial from the scratch..
..
Why is so hard to read even the title of the very first thread in the General section? There you will find your answers...
ghenn4 said:
Why is so hard to read even the title of the very first thread in the General section? There you will find your answers...
Click to expand...
Click to collapse
Because you don't get banned for at least 1 week starting thread #143 like this.
Tapatalked - There's a Thanks button somewhere
Lesson n. 1
How not to begin a topic.
welcome to the NIGHTMARE
you should look at S. U. R. F. A. C. E Rom thread. the Rom is very nice and he has very good tutorials for beginners!
Sent from my GT-I9000 using XDA App
Well, first of all, the latest roms are not always the best ones. Since gingerbread 2.3.4, we've had in sequence: JVQ, JVR, JVS, JVT and now JVX, JVW and JVZ.
However, many still consider JVR to be smoother and more stable than the newer ones. Then, there is also the wifi problem on JVS and above.
Similarly, there is the infamous phone.apk force close problem on all these roms, which was not present on gingerbread 2.3.3.
But gingerbread 2.3.3 had serious battery drain issues, which weren't present on Froyo roms.
So, here's what you need to know as a beginner:
-The latest roms and custom roms give you the advantage of theming, modding and tweaking, all of which are very fun and exciting. Seriously. I used to flash my galaxy s multiple times a day.
-But the smoothest, lag free roms are the Froyo 2.2.1 roms. Stick with those if you want stability and speed. After all, gingerbread doesn't have any important extra functionalities. But, froyo roms lack support for latest tweaks and themes.
So, if you're happy with your current rom, there is no actual need to change it.
But, if you are really keen on trying other roms before settling down, you need to be able to flash roms. To do that, you'll need to:
1) Install Samsung Kies to get the samsung usb drivers
2) Download odin 1.3 or above
3) Download the rom of your choice and follow their flashing instructions
4) To be safe, download a froyo stock rom and a gingerbread stock rom with bootloaders just in case you need to revert to stock
5) To be even safer, perform the unbrickable mod on your phone first, though the SGS is pretty hard to hard brick anyway.
thanxxxxxx
..................................