Related
I can't boot my bravo. It Screen freezes at moto logo
help me pls.
I did follow MR. bandroidx Posted
1) take out the battery
2) press and hold down the vol up button
3) w/o releasing rhe vol up button, put the battery in.
4) within 3 seconds a black screen will come up with white text.
and now my screen show a black screen will come up with white text
Bootloader
09.12
battery ok
ok to program
connect USB
data cable
now what's next to do
you have a semi brick just like i did, but dont worry it can be easilly saved.
you need RSD lite version 5.0 or 7.0 i dont remember and the bravo froyo SBF that you can find here on the forums. i forgot the steps and how to recover it but i have em somewhere in my email, can't find em at the moment. If anyone wants to help the kid out while i do that, much a appreciated in advance
slowcurve said:
you have a semi brick just like i did, but dont worry it can be easilly saved.
you need RSD lite version 5.0 or 7.0 i dont remember and the bravo froyo SBF that you can find here on the forums. i forgot the steps and how to recover it but i have em somewhere in my email, can't find em at the moment. If anyone wants to help the kid out while i do that, much a appreciated in advance
Click to expand...
Click to collapse
Thanks. I'll waiting your help
My bravo is recovery by RSD lite version 5.0 and 2.2.1 SBF
Thank a lot for your advice
were you able to fix it?
I cannot get my phone past the initial Motorola screen either. I rooted and flashed bandroidx's rom. When I wipe and recover still nothing.
I downloaded RSDlite version 5.0, hooked up the usb, but it did not recognize it. Is there any hope or do I now own a brick?
Thanks for any and all help!
Oh and when I get to the recovery screen I get this:
E: Can't open /cache/recovery/command
at the bottom of the screen.
Make sure you press and hold the volume up, not down, when turning on the phone. This will bring you to the correct screen to sbf your phone
Sent from my MB520 using XDA App
RSD lite worked for me
slowcurve said:
you have a semi brick just like i did, but dont worry it can be easilly saved.
you need RSD lite version 5.0 or 7.0 i dont remember and the bravo froyo SBF that you can find here on the forums. i forgot the steps and how to recover it but i have em somewhere in my email, can't find em at the moment. If anyone wants to help the kid out while i do that, much a appreciated in advance
Click to expand...
Click to collapse
It worked for my bravo mb520, now my phone is working again. Thanks!!!!
Hi all,
I have a friend's Defy from a French carrier and my friend is with another carrier so I decide to SIM unlock it by installing CM7 and other files.
So I have root it and install the recovery.
In recovery, I have flash CM7 and Gapps.
But I get a boot loop...
So I decided to flash JORDN_U3_97.21.51 SBF and restart from scratch.
But now, the phone wont boot at all.
Nothing on the screen but it's still reconized by RSD (even if nothing is displayed on the screen) I can re-flash SBF files and RSD say "PASS" but doesn't reboot the phone.
So now I have a brick and can't boot vol up + power doesn't display anything.
Dose anyone have an idea for me ?
Thank you.
1st don't loose your battery - when no working system on the device then it is not being charged
You wrote nothing about wipes - have u performed them? If not try to get into any recovery and wipe user data / factory reset, try vol- w/power or vol + & - together, take a battery for some time before doing it etc.
What ROM u had before flashing CM7?
Is it defy or defy+?
And you flashed CG5 sbf
When you give more details maybe I can propose proper solution.
You wrote nothing about wipes - have u performed them? If not try to get into any recovery and wipe user data / factory reset, try vol- w/power or vol + & - together, take a battery for some time before doing it etc.
Click to expand...
Click to collapse
If I understood right, OP's DEFY is completely bricked and he cannot even access recovery.
Anyway, I unfortunately no solution to propose as I have a DEFY in the same situtation and I'm currently unable to revive it. We aren't the only who had DEFY bricked like this and some managed to have it wake up by flashing certain sbf.
You can try searching "bricked defy" on XDA and see what sbf the topic creator used to save his DEFY, if he succeeded to.
dont flash sbf just after the bootloop..!
-JFK- said:
Hi all,
I have a friend's Defy from a French carrier and my friend is with another carrier so I decide to SIM unlock it by installing CM7 and other files.
So I have root it and install the recovery.
In recovery, I have flash CM7 and Gapps.
But I get a boot loop...
So I decided to flash JORDN_U3_97.21.51 SBF and restart from scratch.
But now, the phone wont boot at all.
Nothing on the screen but it's still reconized by RSD (even if nothing is displayed on the screen) I can re-flash SBF files and RSD say "PASS" but doesn't reboot the phone.
So now I have a brick and can't boot vol up + power doesn't display anything.
Dose anyone have an idea for me ?
Thank you.
Click to expand...
Click to collapse
frend i wanna tell u onething.the very first time i did the flashing of cm7.1stable on froyo 2.2.2defy i got a bootloop..since i was in hostel i cudnt afford internet..so i was soo scared and even waited for 15 min..but the cm7 logo with an arrow swirling around didnt stop..i puld the batery out and again inserted and did something stupid like clearing data and got the condition worse
then i flashed sbf using rsd lite ..again rooted and flashed cm7.1 stable and got bootloop..this time i surfed net and found what shud hav been done ..
1)pull out the battery after the boootloop.
2)clear cache
3)reboot
tats it..the welcome window comes in no time..
so coming to the present issue, after flashing the smf did u get bootanimation with light passing over "android" againg and again ??
Check that u r using the latest RSD.
I have a Defy plus but the same thing happened to me before (black screen even no boot with vol up) so I connected my phone to the computer (I can't really remember if I powered with a vol up or not) but I got it recognized by the RSD. try connecting and powering on the the vol up if nothing just connect and see what will happen.
The most important thing is to use the latest version of RSD.
and please tell me if it worked.
I'm not responsible for anything.
Hi.
I was running cm7.1 and flashing to cm9, when the battery fell out (my stupid mistake) when it was installing cm9.
Now all that comes up on the display when I start her up is the Google/cm logo.
Pressing vol down while starting dosent get me in recovery mode, but pressing vol up does get me in bootloader mode. When I plugged the phone to the PC, it downloaded something, so that works...
The problem is that I dont konw what to do from here, I bet the awnser is out here, but I dont konw what to search for.
Anyone got a minute to help, I bet its a simple fix :]
Thanks
I guess the "simple fix" would be using RSD Lite to flash some stock or fixed sfb from Recovery and start over (root, 2nd init..)
Well, thats awsome, installed new stb driver with rds tool, ran the setup, and after a long wait the phone is back in action.
Thanks alot!!
Original message
:I need some serious help.
I tryed to flash custom 2.3.6 fixed sbf.
which didnt end well, after powerup i would go straight to bootloader with err codes.
so tryed to flash another stock SBF, that ended me in inifinte bootloop with android logo. after 20 minutes in bootloop i gave up and flashed another stock SBF this time it was cellcom israel sbf, it finished the flashing succesfully but now the phone wont powerup at all. not bootloader not recovey.
nada...
I really need your help here, any kind of insights will help. please this is urgent.
BTW: this is a red lense defy, last rom was JB 4.1.1 quarx 30.07 build.
the sbf was supposed to have the same rom.
update 1: managed to finally flash stock, cant enable 3g. phone is still rooted, installing superuser is succesfuly but doesnt control attributes. so 2ndinit currently does not work,
issue solved
Click to expand...
Click to collapse
UPDATE 16/11/2012: links check and updated everything should work.
Solution:
1. first get these files as we'll need all of them: Rsd lite (download and install that),
Motorola drivers (download and install: Here)
JORDN_U3_97.21.51.rar(contains sbf file): http://www.4shared.com/get/xzT3dMXv/JORDN_U3_972151.html
firmware.rar(contains another sbf file): http://www.4shared.com/rar/Ytt5O6--/firmware.html
2ndinit 1.4.2, and 2ndinit 2.3 (can be found here: http://forum.xda-developers.com/showthread.php?t=1032212).
also need the nandroid backup: http://www.4shared.com/file/pVQfB4bF/2011-06-11141427.html
[Optional]
superuser.zip file installing from recovery: http://downloads.androidsu.com/superuser/Superuser-3.2-arm-signed.zip
2. [Optional] I didn't have a router at my house and no signal at my phone and i needed internet for 2ndinit, so i installed a program that turns my wifi on the computer into a hotspot, it can be found here: http://www.connectify.me/
3.First shutdown your phone, hold the Vol down and boot the phone up keeping the volume down pressed. you should come up to a triangle android logo, press the vol up and down key and then tap the screen ( this is a touch screen gui), choose the wipe data/cache and press ok, this should take up to 5 minutes.
4. Now, shut down the phone (pull the battery out and return it back in), Hold the Vol Up button and power up your phone.
you will enter the Bootloader (or BL as its called in the forums) and you should see the phone stating that (usually 9.10 version)
5. after installing Rsd lite, launch it, extract the JORDN_U3_97.21.51.rar and firmware.rar files into root directory (C:\ or D:\ or whatever).
in rsdlite press the
...
Click to expand...
Click to collapse
button and choose the JORDN_U3_97.21.51.sbf file.
connect your phone via a usb cable to your computer, the phone should state its connected. and you should see on the rsdlite window that a device is connected, click on it and press the button :"start".
let it finish and boot on itself (it should do that).
6. [Optional] if you started with low battery now is a good time to charge your phone.
7. transfer the 2ndinit 1.4.2 apk and the 2ndinit 2.3 apk into a folder in your sd card (name it "A" for ease of use).
also extract the 2011-06-11.14.14.27.zip into this folder on your sd card "/clockworkmod/backup/"
8. extract the superoneclick on your computer and launch it, while the phone is connected (should also be in usb debugging mode), press the root button in the superoneclick window and watch the magic, make sure you also install busybox (should be installed automatically when pressing the ROOT button).
9. disconnect your phone, use the file explorer provided with this rom and make sure you check with a "V" to "allow 3rd party apps" in the settings. install the 2ndinit1.4.2.apk file.
open the app after installation and make sure you have internet connectivity, press the install bootmenu option.(now pop-ups should appear regarding permissions, choose "allow" for all of them).
after the green led has turned on, go to settings menu under application/development and turn off the "usb debugging mode".
10. restart your phone and make sure you press the vol down button when the led turns blue during the bootup.
when in bootmenu, choose recovery-> custom recovery.
when in recovery, choose "wipe data/factory reset", "wipe cache", "advanced-> wipe dalvik".
now return to recovery menu and choose "backup/restore"->"restore->2011-06-11.14.14.27".
this should take a couple of minutes.
when its done, go back again to recovery menu, and choose again "wipe cache", "advanced-> wipe dalvik".
power off the phone.
11. hold the vol up button once again and power up the phone to go into bootloader screen.
connect your phone once again to your computer and on the rsdlite window choose the "firmware.sbf" file.
press start and flash it.
12. let the phone boot up, congrats you just revived your phone, root it once again using super one click (if needed), install the 2ndinit2.3.apk.
transfer whatever rom you like (dont try sbf's cause that's how I first got in this mess), reboot phone, go into stock recovery and install that zip after wiping data/factory reset. and ohh well you know the rest.
Good luck.
P.S if you can't or dont know where to find the files take a quick search in the forums and youll find most of them.
Reserved
reserved
when i flash firmware.sbs it takes me back to Android Bootmenu when it reboots please help. thanks
Shouldnt happen, make sure you Wipe Data, and cache, before the nandroid backup and after the nandroid backup.
only then u can flash the firmware.sbf
if the bootmenu still comes up simply choose "Boot-> set default-> normal". and reboot.
if still comes back to bootmenu (and i hope you are talking about bootmenu and not bootloader). install through custom recovery your favorite ROM and don't forget the corresponding Kernel.
good luck!
Is that work with bl7 ???
I've been trying to restore my phone for weeks, up until this thread, I started to think the internet couldn't help me. You are a god amongst men.
OK, banging my head against a wall here; I have 2 defy's. Mine has been to a war zone 4 times, I've replaced the screen (and the waterproof gasket) once, It's broken (the case) but still works except for the fact that the last time I had to flash an sbf I messed up the charging ability with the "macguyver" method.
Now I recently got a pristine looking red lens defy from a friend who said it wasn't booting...It "tried" but never stayed booted long. I tried immediately flashing one of the fixed sbf's with CM10 on it, and ever since I get the bootloader 09.10 code corrupt message.
I've tried the method listed here (by the way the first firmware in OP won't download for me, something about violating some terms of agreement?) the one labeled simply "firmware" downloaded.
Still no joy. Every flash I get all the way through code group 32 checksums match. Everything after that fails. Have tried multiple CEE, Nordic, Chinese, even Defy+ sbf (the new defy has red lens) with no luck.
Likewise when I tried flashing via linux (sbf_flash). The other night after battery out for quite awhile it led me to believe it had started working, and allowed me to get into recovery and wipe everything, but it was all false hope. It still did not boot (motorola M boot loop) and likewise, it still did not flash.
Anyone have any ideas how I can proceed to fix this thing?
I thought I had this thing figured out but obviously I was mistaken.
thanks in advance
I just unbricked my phone again yesterday after trying the latest cm10 sbf with no luck, so i can guarantee this method still works, however the firmware.sbf file is really needed and also the nandroid backup, so here's what i'll do:
1. i'll check what links are broken and reupload the necassery files.
2. I'll clean the the first message and update the links
so check back in about an hour
Thanks a lot for posting this. Tried to restore my phone using lot of other posts since the last 3 to 4 days days, but all in vain.
Was anybody able to install CM10 over this? After the installation, the phone is going into boot loop.
Thanks rtk217 for starting this guide very useful for noobs...
I've made some video tutorials using a few of the guides in the forums here...
hope it helps someone...
Its a complete step by step.
Part 1 of 4. This part deals with preparation of all the required files to successfully complete the custom rom installation.
http://youtu.be/jMAlys2_KG4
Part 2 of 4. How to restore Defy to default
http://youtu.be/6SUysKZ2E5Y
Part 3 of 4. How to root using SuperOneClick and install clockworkmod.
http://youtu.be/hd3_SRbkUWw
Part 4 of 4. How to install 2ndinit recovery and install CyanogenMod 10 Jelly Bean 4.1.2
http://youtu.be/gNPacGesWOI
I am still not able to install CM10. I had bricked my phone a week ago, so I followed this post using the below steps:
1. Flashed with JORDN_U3_97.21.51.sbf.
2. Installed 1.4.2 Sndinit..
3. restored the nandroid backup 2011-06-11.14.14.27
I am able to restore Froyo...
Now I am trying to install CM10 using the following steps:
1. Install 2.3 Sndinit
2. do a full wipe
3. install CM10-20121205-NIGHTLY-mb526.zip
4. Install Defy-Gapps-CM10-20121109-without-Voice.zip
once rebooted moto logo appears.. the LED turns red and again tries to reboot.. again reboots to moto logo and the same thing happens!
Can somebody help me?
k.manojraja said:
I am still not able to install CM10. I had bricked my phone a week ago, so I followed this post using the below steps:
1. Flashed with JORDN_U3_97.21.51.sbf.
2. Installed 1.4.2 Sndinit..
3. restored the nandroid backup 2011-06-11.14.14.27
I am able to restore Froyo...
Now I am trying to install CM10 using the following steps:
1. Install 2.3 Sndinit
2. do a full wipe
3. install CM10-20121205-NIGHTLY-mb526.zip
4. Install Defy-Gapps-CM10-20121109-without-Voice.zip
once rebooted moto logo appears.. the LED turns red and again tries to reboot.. again reboots to moto logo and the same thing happens!
Can somebody help me?
Click to expand...
Click to collapse
Have you got a Defy or Defy+ as you are trying to install the cm10 zip for MB526 (Defy+)
I have a defy mb525.. The one i tried to install is a 2nd boot build that is common for both mb525 and mb526
k.manojraja said:
...
Now I am trying to install CM10 using the following steps:
1. Install 2.3 Sndinit
2. do a full wipe
3. install CM10-20121205-NIGHTLY-mb526.zip
4. Install Defy-Gapps-CM10-20121109-without-Voice.zip
once rebooted moto logo appears.. the LED turns red and again tries to reboot.. again reboots to moto logo and the same thing happens!
Can somebody help me?
Click to expand...
Click to collapse
Why are you using 2ndInit 2.3???
All the guides and FAQs will tell you to use 2ndInit 1.4.2
hey i have the same problem did you fix it?
k.manojraja said:
I have a defy mb525.. The one i tried to install is a 2nd boot build that is common for both mb525 and mb526
Click to expand...
Click to collapse
hey i have the same problem did you fix it?
Thanks ...
Hay, Ur are a genie to me.. I tried so many mods after my imei no is gone. Wifi not working, issues with signal catching.. Now with your step by step guide i was able to overcome all of those... Thank you very much.
cmcooper123 said:
hey i have the same problem did you fix it?
Click to expand...
Click to collapse
Yep... Please see the thread http://forum.xda-developers.com/showthread.php?t=1618718&page=32
Look at pages 31 and 32...
k.manojraja said:
Yep... Please see the thread http://forum.xda-developers.com/showthread.php?t=1618718&page=32
Look at pages 31 and 32...
Click to expand...
Click to collapse
but if i flash defy plus firmware on a defy mb525 wont that brick it?
---------- Post added at 12:05 PM ---------- Previous post was at 11:24 AM ----------
cmcooper123 said:
but if i flash defy plus firmware on a defy mb525 wont that brick it?
Click to expand...
Click to collapse
lol my bad it did brick it kind of
flashed DEFYPLUS_U3_4.5.1-134_DFP-137_ND_SIGN_SIGNED_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTNORD_P009_A011_HWp3_Service1FF
then JORDN_U3_97.21.51.sbf
now it has a black screen but in boot loader mode sigh
any way this is were i am at:
http://forum.xda-developers.com/showthread.php?t=2032711
SIGH
cmcooper123 said:
bwithut if i flash defy plus firmware on a defy mb525 wont that brick it?
---------- Post added at 12:05 PM ---------- Previous post was at 11:24 AM ----------
lol my bad it did brick it kind of
flashed DEFYPLUS_U3_4.5.1-134_DFP-137_ND_SIGN_SIGNED_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTNORD_P009_A011_HWp3_Service1FF
then JORDN_U3_97.21.51.sbf
now it has a black screen but in boot loader mode sigh
any way this is were i am at:
http://forum.xda-developers.com/showthread.php?t=2032711
SIGH
Click to expand...
Click to collapse
I am really not sure if you have read the posts properly. I had no problems in flashing the defy plus sbf. The defy plus sbf that I gave you was a bl6 version and you can never downgrade to froyo.
97.21.51 is a Chinese éclair with bl5. 2nd boot builds were not working on bl5.
About a month ago I installed a clockwork based recovery app from the market. I tried restoring and this failed leaving the phone unbootable.
Since then I have tried flashing MANY other sbf`s using rsd lite but this has made the situation worse. I think that I even flashed one for the defy+
Now all I get is either a blank screen or a M logo when I switch on.
Pressing power & volume down doesn`t work so I can`t access the stock recovery menu
I can access the bootloader using power & volume up so i can flash more sbf`s but I`ve tried most of them but none will boot.
BTW the phone was running cm7.1 before I had all this trouble and the battery has been fully charged (in another defy)
Is there any way I can clear off all the stuff I`ve been installing and start from fresh? or can anyone tell me how to get the phone to boot?
I have searched for a solution in the forums but most of the replies involve clearing the cache which I cant do as I cant get to the recovery menu.
Any helpful comments will be gratefully received
many thanks
Jeff H
Your flashs complete with Finish/Pass, or just "please manually power up this phone"?
If it's the later, read this http://forum.xda-developers.com/showpost.php?p=38187413&postcount=2
Just stick to the most highest Defy+ sbf build, or just use DFP-231 build to be sure.
intemptesta said:
Your flashs complete with Finish/Pass, or just "please manually power up this phone"?
If it's the later, read this http://forum.xda-developers.com/showpost.php?p=38187413&postcount=2
Just stick to the most highest Defy+ sbf build, or just use DFP-231 build to be sure.
Click to expand...
Click to collapse
Thanks for the reply
I flashed the DFP-231 sbf file as you suggested but it wouldn`t boot any further than the M logo.
I did get the "please manually power up this phone" message and followed the procedure from the link you gave
I can`t wipe the as I cannot get to the recovery menu.
Is there any other way to wipe the cache?
JeffH
Nah, no other way than stock recovery for stock rom.
Just make sure your flash finished with Finish/pass, that'll make your stock recovery working again.
Wish you a best luck.
i flashed with this:
DEFYPLUS_U3_4.5.1-134_DFP-231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf
but still no boot
Is this the correct rom?
cheers
JeffH
I wonder if the following might give someone a clue about whats wrong with my defy
If I flash gingerbread rom either defy or defy+ then rsd completes with PASS, and phone will boot as far as the M logo and I can access the menu with power+volume UP
If I flash below gingerbread then rsd doesnt complete but gives `manually reboot` message. If I then power off and plug in again then rsd completes with PASS but when I reboot there is NO M logo and no menu on power and volume up.
I`m keeping my fingers crossed that I will be able to revive my phone.
JeffH
With DFP-231 rom, how about power+volume down to boot into stock recovery? I think you're just one step away from reviving defy.
intemptesta said:
With DFP-231 rom, how about power+volume down to boot into stock recovery? I think you're just one step away from reviving defy.
Click to expand...
Click to collapse
No, Power + volume down doesn`t work, (ie nothing happens). Only power + volume up works.
Try this http://forum.xda-developers.com/showthread.php?t=1595013
Vicsa said:
Try this http://forum.xda-developers.com/showthread.php?t=1595013
Click to expand...
Click to collapse
Thanks, but it didn`t work. Still stuck at M logo. Obviously I couldn`t clear the cache before and between flashing
JeffH
Thank you all for your helpful advice.
I have now sent the phone away for repair.
I spoke to the technician on the phone and she reckons it needs dismantling and a jtag repair (whatever that is).
But beware an app on the market, I think it is called orange backup, as it was after installing this and trying to restore the backup that I screwed up my phone!
JeffH