So.. I flashed new rom and my battery is 0%. But its working i can use it. But how i fix that? When i installed new rom my battery was 100%.
You didn't update to official GB before flashing .35 or 3.08 kernel rom
Sent from my GT-P1000 using Tapatalk 2
Pitäiskö siis asentaa eka 2.3 offical ja sitten Roottaa se ja CWM asentaa ja sitten asentaa uus rommi?
Should i flash 2.3 offical and then root and install CWM? And then new rom.
Cacceli said:
Pitäiskö siis asentaa eka 2.3 offical ja sitten Roottaa se ja CWM asentaa ja sitten asentaa uus rommi?
Should i flash 2.3 offical and then root and install CWM? And then new rom.
Click to expand...
Click to collapse
What ROM are you trying to use? If it's a .35 kernel based ROM, you must install stock 2.3.5, it's mandatory.
Sent from my U8800
you must install official 2.3.5 . if you still have this problem, go to cwm and try to reset indicator battery.. hope this problem solved
Sent from my U8800 using XDA
harry051289 said:
you must install official 2.3.5 . if you still have this problem, go to cwm and try to reset indicator battery.. hope this problem solved
Sent from my U8800 using XDA
Click to expand...
Click to collapse
Now its working i installed offical 2.3.5.
Related
Hi friends,
i have one doubt..
is it important to flash the sbf file what quarx is using or is it ok to install CM7 on any stock ROM?
one more question...shall i go for CM7 beta 6 or shall i wait for next upcoming version?
Thank you
You can flash any Froyo Rom ....I am using Indian Froyo and MIUI Rom and CM7 BETA 6 is good according to everyday use...
Sent from my MB525 using XDA App
Thanks for replying
quarx once said he thought it didn't matters.
yup, I think so too. I used French 2.2.2 blur official. SO far everything is working OK
arpith.fbi said:
Thanks for replying
Click to expand...
Click to collapse
There is button for saying THANKS.....LOL
Thanks guys...i installed CM7 Beta 6 last nite..faced all kind of prob one could face..but it was worth it..i learnnt many things..practical is always btr than theory .
CM7 is awesome..battery backup is also very good.3% battery down overnite (i slept for around 7hrs )
Does anyone know, when beta 7 comes out?
RexXxuS said:
Does anyone know, when beta 7 comes out?
Click to expand...
Click to collapse
Yes, Quarx know.....
ifu said:
You can flash any Froyo Rom ....I am using Indian Froyo and MIUI Rom and CM7 BETA 6 is good according to everyday use...
Sent from my MB525 using XDA App
Click to expand...
Click to collapse
I have updated my phone through the motorola software updater (official way)..is it necessary to flash the Nordic SBF or the UK one before installing the CM7 or i can go ahead with the present stock rom..
u can go ahead with ur present stock rom..
heyy guyz
i have cwm installed(NOT XRECOVERY)
plzz suggest me a rom which i can install using CWM
GingerDX, GingerXperia, xGin, kuYadroid and others.... just search forum
Sent from my X8 using XDA App
all these are for xrecovery....i need for cwm...
nd plz provide me with links.....btw i would like to know how can i get "floyo" rom for cwm....
There is no floyo for cwm but you always can install dual boot. All if this roms are for cwm!!!! Dont say something you dont know!!
Sent from my E15i using XDA App
http://forum.xda-developers.com/showthread.php?t=1109563
dis thread of kayaDROID shows that the requirements are xrecovery and cwm...
does this mean that it needs BOTH???
plzz help....m new to installing Roms
Old versions required xrecovery but all new cwm.. read it all explained, new version of kuya is not on first page its somewear in thread so search for it
Sent from my X8 using XDA App
dhruvdangi said:
http://forum.xda-developers.com/showthread.php?t=1109563
dis thread of kayaDROID shows that the requirements are xrecovery and cwm...
does this mean that it needs BOTH???
plzz help....m new to installing Roms
Click to expand...
Click to collapse
Install kuya with xrecovery, its a very good rom, I am running it and I installed it with xrecovery. GingerDX is cwm, some older versions are xrecovery. It should state in rom thread how to install. You dont need both installed but if you want to try different roms then download x8toolbox by puppet13th and you can install dualboot which will give you both xrecovery and cwm, or search for multhboot thread and download dualrecovery.zip, same result as using x8toolbox. Cant post links because im on mobile, hope this helps.
Sent from my E15 using XDA App
U ARE SINFUL FOR NOT INSTALL GINGERDX hahahaha
Install the newest GingerDX, it´s just great!
And don´t forget to flash the LinuxDX too, as it´s pretty cool.
GCR81 + Alfs kernel
rav3n_pl said:
GCR81 + Alfs kernel
Click to expand...
Click to collapse
Hey today i flashed alfs kernel on FXP 8 and it success , but in phone the name of the kernel is still : Semc user bla bla bla ... It should be like this ? Cuz I dont know now if its installed or not dD
Sent from my E15i using Tapatalk
I am using the rom Brazil retail2.3.6 have d2 and recovery boot menu working, my question: Can I install roms and miui CM7 normally?
Thanks
Sorry for my google translante
Sent from my A953 using xda premium
no you cant install rom with kernel of this 2.3.6 rom BR
but some day it will change.
ps.: Before ask, search at forum
As far as I know, you can still use Argen2Stone, the Cyanogenmod 7 from Endless7 and Cyanogenmod 9. There's no MIUI for GB kernel, so you can't install it.
Bricked
MaxK47 said:
As far as I know, you can still use Argen2Stone, the Cyanogenmod 7 from Endless7 and Cyanogenmod 9. There's no MIUI for GB kernel, so you can't install it.
Click to expand...
Click to collapse
Endless CM7 ROM installed, did all the procedure correctly but when the recovery Reinier it simply appears the Endless logo Rom and is fully off, the boot menu also does not start
D2Recovery boot menu and I was working properly
WHAT can be?
Which EndlessCM7 ROM you install? I think the only newest ones are compatible with GB kernel.
You have to flash the sbf 2.3.6 again and later try to install the latest rom available.
EndlessCM7 can be used.
What is the best way and how to go back from cm9 to cm7 on my defy red lens ?
I think I still have the nandroid BU on my card. Or flash cm7 over CM9 ?
I have no idea what to do .
If you are on froyo kernel, just restore the nand.
Otherwise, first flash the froyo kernel.
Sent from my MB525 using XDA
I did the official upgrade from eclair so i think I'm on the froyo kernel ?
Did you flash a kernel zip? If not then yes.
You can always try and if it didn't work, flash any froyo ROM and restore the nand from there.
Sent from my MB525 using XDA
OK it went fine! thnx for the help!
Only some widgets don't work anymore like 3 D digital wheather clock ! Any idea ?
kernel nandroid?
zaiko2000 said:
OK it went fine! thnx for the help!
Only some widgets don't work anymore like 3 D digital wheather clock ! Any idea ?
Click to expand...
Click to collapse
Hi - thanks for the interesting post.
- why did you choose to go back from cm9 to cm7 ?
On another note:
- in what cases does the kernel get upgraded? when going from 2.1 to 2.2 to 2.3?
- does the cm7.1 to 7.2 upgrade also change the kernel?
Thanks!
there were too many bugs in the CM9 . Now I installed the MIUI rom and this is the best I used until now ! Fast, nice and no bugs ! Everything works fine!
For the kernel until now I didn't change or upgrade any kernel .
Recently I installed a custom rom (oxygen) on my Huawei X5 (U8800H) for first time and it was so easy therefore I have some questions before flashing another rom:
1. What is the difference between installing rom and force upgrade? (not in the method)
2. If I make a force upgrade (official GB for example) why I can't return to the stock rom simply by formatting the system and restore the backup rom?
3. Does the rom I want to install depend on the stock rom? If yes, How?
4. What is the best JB rom for IDEOS X5 that it is suitable for daily usage? (I have searched JB roms but I didn't find any stable rom)
5. If I flashed a rom customized for another phone on my U8800, does this brick it?(whether it is working or not)
6. If I flashed a kernel customized for another phone on my U8800 or a kernel with a version dosen't customized for the rom, does this brick the phone? Or can I change the kernel if it didn't work?
7. What is the directory of kernal's files? and dose it came with some roms? (zip rom)
In the stock rom the kernel version is 2.6.32.9-perf [email protected] #1 but in oxygen it is 2.6.32.9-perf [email protected] #221 dose this mean there is something changed in the kernal?
8. Roms like ICS dzo's Aurora require official update to GB , is it necessary if I flashed official GB kernal or any same version kernel?
If you can answer any question of those above, I'll be very grateful. Thanks.
Ill answer the questions i can:
3: it depends on the kernel. Froyo(2.2?) have 3.0 and gingerbread have 3.5, so you can only install 3.0 roms on a froyo phone and 3.5 roms on a gingerbread phone.
4: It isnt any stable JB roms yet but for ICS dzo's Aurora is very stable and mosterras Elora is said to be very stable to even tho i havent tryed it yet.
5: yes, it will brick if you flash a rom for another phone.
It also depends on the flavor of U8800 (plain, Pro or -51). We really need a sticky post about this at the top of this forum.
Yeah, I totally agree with you there. It's something its really easy to get wrong.
Sent from my U8800 using Tapatalk 2
theminikiller said:
3: it depends on the kernel. Froyo(2.2?) have 3.0 and gingerbread have 3.5, so you can only install 3.0 roms on a froyo phone and 3.5 roms on a gingerbread phone.
4: It isnt any stable JB roms yet but for ICS dzo's Aurora is very stable and mosterras Elora is said to be very stable to even tho i havent tryed it yet.
Click to expand...
Click to collapse
See Q.8 and the others if you can.
Thanks a lot.
custom rom
The best is custom rom not official roms
In the official CWM 5.0.2.6 recovery I installed oxygen rom and every thing was normal but their is a problem with the official CWM recovery. When I want to restore a previous backup for the same rom or the sock one, this appears:
Code:
Checking MD5 sums...
MD5 mismatch!
1.Must I change the recovery?if yes,which one must be installed?
2.Is every rom have its customized recovery?
Mahdial said:
In the official CWM 5.0.2.6 recovery I installed oxygen rom and every thing was normal but their is a problem with the official CWM recovery. When I want to restore a previous backup for the same rom or the sock one, this appears:
Code:
Checking MD5 sums...
MD5 mismatch!
1.Must I change the recovery?if yes,which one must be installed?
2.Is every rom have its customized recovery?
Click to expand...
Click to collapse
2. Gingerbread roms use 5.0.2.6 recovery and ICS roms use 5.5 (and 2 more numbers) recovery. So it only depends on the base of the rom you are flashing.
theminikiller said:
2. Gingerbread roms use 5.0.2.6 recovery and ICS roms use 5.5 (and 2 more numbers) recovery. So it only depends on the base of the rom you are flashing.
Click to expand...
Click to collapse
Can I try different recoveries (.img) to see which one would work? or it may harm the device?
Thanks
Sent from my u8800 using xda app-developers app
I don't think it will help changing the recovery if you are you using the same recovery for r restoring as you did when you made it, but I don't think it will harm you're device.
Sent from my U8800 using Tapatalk 2
Take a look on this http://forum.xda-developers.com/showthread.php?t=1802198
And see if it has a relation with my problem.
Thank you.
Sent from my u8800 using xda app-developers app
Hi
Is it possible to install the official gingerbread kernel on a gingerbread ROM like CM7.2 or OXYGEN? Can this speed up the phone?
♥♡♥♡♥♡♥♡♥♡♥♡♥♡
★HUAWEI IDEOS X5 U8800H★
♥♡♥♡♥♡♥♡♥♡♥♡♥♡
Mahdial said:
Hi
Is it possible to install the official gingerbread kernel on a gingerbread ROM like CM7.2 or OXYGEN? Can this speed up the phone?
♥♡♥♡♥♡♥♡♥♡♥♡♥♡
★HUAWEI IDEOS X5 U8800H★
♥♡♥♡♥♡♥♡♥♡♥♡♥♡
Click to expand...
Click to collapse
Any answer?!!!!
★HUAWEI IDEOS X5 U8800H★