Hi friends,
i have one doubt..
is it important to flash the sbf file what quarx is using or is it ok to install CM7 on any stock ROM?
one more question...shall i go for CM7 beta 6 or shall i wait for next upcoming version?
Thank you
You can flash any Froyo Rom ....I am using Indian Froyo and MIUI Rom and CM7 BETA 6 is good according to everyday use...
Sent from my MB525 using XDA App
Thanks for replying
quarx once said he thought it didn't matters.
yup, I think so too. I used French 2.2.2 blur official. SO far everything is working OK
arpith.fbi said:
Thanks for replying
Click to expand...
Click to collapse
There is button for saying THANKS.....LOL
Thanks guys...i installed CM7 Beta 6 last nite..faced all kind of prob one could face..but it was worth it..i learnnt many things..practical is always btr than theory .
CM7 is awesome..battery backup is also very good.3% battery down overnite (i slept for around 7hrs )
Does anyone know, when beta 7 comes out?
RexXxuS said:
Does anyone know, when beta 7 comes out?
Click to expand...
Click to collapse
Yes, Quarx know.....
ifu said:
You can flash any Froyo Rom ....I am using Indian Froyo and MIUI Rom and CM7 BETA 6 is good according to everyday use...
Sent from my MB525 using XDA App
Click to expand...
Click to collapse
I have updated my phone through the motorola software updater (official way)..is it necessary to flash the Nordic SBF or the UK one before installing the CM7 or i can go ahead with the present stock rom..
u can go ahead with ur present stock rom..
Related
So, which ROM is better for GT540??
2.3.5 is best in my opinion I tried the 2.2 roms didn't like them tried mur4iks work loved it never looked back
Sent from my GT540 RSpec using XDA App
Wonder when there'll be Android 4.0 for the LG GT540. Will it be even compatible?
Guys, author wrote question of comparision between two froyo roms, so why you recommend gb roms ?
Sent from my GT540 using Tapatalk
lol i think utopia is better
Danzano said:
2.3.5 is best in my opinion I tried the 2.2 roms didn't like them tried mur4iks work loved it never looked back
Sent from my GT540 RSpec using XDA App
Click to expand...
Click to collapse
GB has bad battery life.. and Mur4ik is not updating it..
droid000 said:
GB has bad battery life.. and Mur4ik is not updating it..
Click to expand...
Click to collapse
mur4ik cant do anything about the battery. that is why our phone is never officially updated to 2.3 cus 2.3 is power hungry and so using alot of battery
bs828 said:
mur4ik cant do anything about the battery. that is why our phone is never officially updated to 2.3 cus 2.3 is power hungry and so using alot of battery
Click to expand...
Click to collapse
I know, and that is why I ask about Froyo ROMs..
Well, if you just want a stock looking, fast ROM, then go for AOSP, but if you want more themes, and other mods then go for Utopia.
I'm staying on Utopia.. and I will make MIUI theme for it when I get my phone back..
droid000 said:
I'm staying on Utopia.. and I will make MIUI theme for it when I get my phone back..
Click to expand...
Click to collapse
i would love a miui theme for utopia
Market is not working on 2.2.1 utopia...unable to download apps from market....if i click download the apps are being shown as downloading but are not completed downloading what to do
PavanR said:
Market is not working on 2.2.1 utopia...unable to download apps from market....if i click download the apps are being shown as downloading but are not completed downloading what to do
Click to expand...
Click to collapse
Works fine for me, try flashing gapps. Download this, put it on the SDCard and flash it using Clockwork Recovery.
Utopia anytime, miroslav_mm is working really hard on it. It's a lot more 'complete' than AOSP
tejasdj12 said:
Utopia anytime, miroslav_mm is working really hard on it. It's a lot more 'complete' than AOSP
Click to expand...
Click to collapse
Than why are you using EleganceSwift 5.0??
droid000 said:
Than why are you using EleganceSwift 5.0??
Click to expand...
Click to collapse
Oops! I completely forgot my signature. As I'm always between ROMs! Thanks for pointing out!!
HAHAHAA
Utopia was my favorite until the RC3 version came out. I had a lot of trouble trying to make Link2SD work (I experimented with different versions of Busybox and finally I got it to recognize the second partition) but today I had another problem with WiFi, which suddenly stopped seeing my WPA2 home network. I had to go back to my previous version, where everything works...
I'm really intrigued about Utopia. I've read that it's fast yet it doesn't eat up battery like other roms. I'm just wondering how do I upgrade to that. I currently have stock eclair and somewhat of a noob when it comes to rom upgrading. Thanks
rekcah_ogami said:
I'm really intrigued about Utopia. I've read that it's fast yet it doesn't eat up battery like other roms. I'm just wondering how do I upgrade to that. I currently have stock eclair and somewhat of a noob when it comes to rom upgrading. Thanks
Click to expand...
Click to collapse
You could flash a Fastboot ROM vis KDZ. It could be one of the many ways.
is there any hope to return camera to work ?
What return?
There was no camera in CM9...
Just wait....It'll be soon working.
It's like drivers for Windows, except this is Android.
is known about possible date?
emel-iine-6z said:
is there any hope to return camera to work ?
Click to expand...
Click to collapse
Quarx still work to fix the camera and radio for Defy
In the last build of Quarx ICS adi4motion said he is close to getting
i have just installed CM9 on my defy but i restored my apps with Titanium Backup and my phone restarted....and now it keeps bootlooping...what should i do?
roocko.o said:
is known about possible date?
Click to expand...
Click to collapse
Don't ask for ETA it's just "close to get working".
tashu_cristy said:
i have just installed CM9 on my defy but i restored my apps with Titanium Backup and my phone restarted....and now it keeps bootlooping...what should i do?
Click to expand...
Click to collapse
you could try clearing dalvic cache and cache...
have you restored any "system" files? that could also cause some problems. if you don't get it running again, i would flash again. Then try to only restore user apps. I think then you will be all right.
thank you
it works now
Sent from my MB526 using XDA App
Is it possible to use quarx release of cm9 on a defy+ that had been flashed with the new sbf from Motorola?
Sent from my MB526 using XDA App
edephant said:
Is it possible to use quarx release of cm9 on a defy+ that had been flashed with the new sbf from Motorola?
Sent from my MB526 using XDA App
Click to expand...
Click to collapse
Quarx has been building ROMs for the Froyo based kernel defys .. you can try the ICS builds of epsylon3 which has been developed for GB kernal based defys. If u have rooted ur mobile then u can try epsylon3 builds instantly or if u want to use Quarx builds then u need to flash Froyo kernal after flashing the ROM...
How can i flash a new kernel. Is there a .zip file for download?
There are two versions of cm9,one with froyo(uses cm7 kernel) and the other with ginger bread(uses cm9kernel).
You can see these threads for the same. The kernel zips are also there to download.
forum.xda-developers.com/showthread.php?t=1432100
forum.xda-developers.com/showthread.php?t=1353003
Sent from my MB526 using XDA App
[edited] moved question about CM7&9 Froyo vs GingerBread on devices with 2.3.4 Kernel/Build 4.5.1-134_DFP-74 to new thread http://forum.xda-developers.com/showthread.php?t=1477554
Anyone who can help me to go back to Stock rom for Defy Green lens... i have 2.3.6 now but my camera not working I just seen DARK, also when i charge my defy it says your device battery is invalid and cannot be charged...
plss help me to go back froyo so i can proceed to other ROMs like CM9 or any ICS cause i nid to fix Battery problem and camera...
i appreciate anyone help
dadschrom said:
Anyone who can help me to go back to Stock rom for Defy Green lens... i have 2.3.6 now but my camera not working I just seen DARK, also when i charge my defy it says your device battery is invalid and cannot be charged...
plss help me to go back froyo so i can proceed to other ROMs like CM9 or any ICS cause i nid to fix Battery problem and camera...
i appreciate anyone help
Click to expand...
Click to collapse
What's the build number of your current ROM?
Doesn't matter from where I send it, what matters is written above
neo.ank said:
What's the build number of your current ROM?
Doesn't matter from where I send it, what matters is written above
Click to expand...
Click to collapse
Sir I use this full sbf file Blur_Version.45.0.2310.MB526.NonEFIGSRetail.en.EU (2012/01/12)...
here is the link of roms information http://forum.xda-developers.com/showthread.php?t=1540633
hi.
i have same problem.
now no way to fix battery and camera.
u must charge with wall charger.
wait for froyo kernel port for BL7.
maybe this work for u!
refer to downgrade part
http://forum.xda-developers.com/showthread.php?t=1216982
dadschrom said:
Sir I use this full sbf file Blur_Version.45.0.2310.MB526.NonEFIGSRetail.en.EU (2012/01/12)...
here is the link of roms information http://forum.xda-developers.com/showthread.php?t=1540633
Click to expand...
Click to collapse
Unfortunately, you flashed a Defy+ full SBF, you CANNOT downgrade it..
Try flashing the GB kernel, there's a rare chance it might wrk..
Doesn't matter from where I send it, what matters is written above
neo.ank said:
Unfortunately, you flashed a Defy+ full SBF, you CANNOT downgrade it..
Try flashing the GB kernel, there's a rare chance it might wrk..
Doesn't matter from where I send it, what matters is written above
Click to expand...
Click to collapse
so i cant downgrade... omg
i will flash it again on 2.3.6 so i can use it even it doesn't have camera and battery
Unfortunately you have to...
You should've paid attention to the SBF before flashing..
dadschrom said:
Anyone who can help me to go back to Stock rom for Defy Green lens... i have 2.3.6 now but my camera not working I just seen DARK, also when i charge my defy it says your device battery is invalid and cannot be charged...
plss help me to go back froyo so i can proceed to other ROMs like CM9 or any ICS cause i nid to fix Battery problem and camera...
i appreciate anyone help
Click to expand...
Click to collapse
Dude the same problem happen with me and i am also searching how to downgrade 2.3.6 to froyo...but i think it's not possible...only hope on cm9 which have camera fix...
Sent from my MB526 using xda premium
shaGGy5678 said:
Dude the same problem happen with me and i am also searching how to downgrade 2.3.6 to froyo...but i think it's not possible...only hope on cm9 which have camera fix...
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
hei u got CM9? from 2.3.6?? how can u show me so i can try it
neo.ank said:
Unfortunately you have to...
You should've paid attention to the SBF before flashing..
Click to expand...
Click to collapse
can i use this on 2.3.6 http://forum.xda-developers.com/showpost.php?p=15341774&postcount=8 ?
dadschrom said:
hei u got CM9? from 2.3.6?? how can u show me so i can try it
Click to expand...
Click to collapse
I found cm9 but its not stable and still have camera problem when the stable version or camera bugs are fix then we will try it and i will PM you...
Sent from my MB526 using xda premium
shaGGy5678 said:
I found cm9 but its not stable and still have camera problem when the stable version or camera bugs are fix then we will try it and i will PM you...
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
okay sir thanks a lot
Already fixed the battery problem?
You can root using the method from dev section (the bl7 method, use only then). Afterwards instal 2nt Init. Now you can instal custom ROMs again (only the defy+ ones). After that you might also have to flash a battery fix.
But camera will most likely never work for you without a new defy sbf released.
Sent from my MB525 using XDA
labsin said:
Already fixed the battery problem?
You can root using the method from dev section (the bl7 method, use only then). Afterwards instal 2nt Init. Now you can instal custom ROMs again (only the defy+ ones). After that you might also have to flash a battery fix.
But camera will most likely never work for you without a new defy sbf released.
Sent from my MB525 using XDA
Click to expand...
Click to collapse
okay sir ill try... thanks thanks
Any solutions to this problem in 2015?
dadschrom said:
okay sir ill try... thanks thanks
Click to expand...
Click to collapse
Hello...Please help! I had an old green lens motorola defy mb 525 that I wanted to upgrade for my 12 year old son (he lost his old phone ). Now I have the same problem stated above... Is there anyway to fix it nowadays? I had the mb525 running froyo and now I have the gingerbread 2.3.6 but the camera is not working at all.
Hey everyone,
I have been searching all over the web for the best kernel but am yet to find one, so i am after your opinions. What do you believe is the best froyo kernel for Wiui v4 (ICS) that has great performance.
Thanks in advance
There is only on Froyo kernal and other is Gingerbread kernal. Almost all ROM threads have froyo kernal links available. Download and flash.
Sent from my MB525 using XDA
nidhish91 said:
There is only on Froyo kernal and other is Gingerbread kernal. Almost all ROM threads have froyo kernal links available. Download and flash.
Sent from my MB525 using XDA
Click to expand...
Click to collapse
Yeah i know that theres like the normal kernels but i was just wondering if there was a custom one like SiyahKernels or something that worked great on the defy with wiui
tryordie said:
Yeah i know that theres like the normal kernels but i was just wondering if there was a custom one like SiyahKernels or something that worked great on the defy with wiui
Click to expand...
Click to collapse
Nope none of that kind. Thanks to the locked bootloader of Defy.
ALL HAIL MOTO
Sent from my MB525 using XDA
wajk wrote he uses the cee froyo (3.4.2-179_002) sbf as a base, but you can also use nordic. no further kernel flashing is needed.
sent from my cm9 defy...
Hello, so I am new user of Huawei U8800 and I succeded to install Aurora ICS on it, but now I would like to try CM7. But I don't know how to get back to Froyo and then from Froyo to CM7 (as it says in CM7 install instructions?
Thanks for help.
Just format system and data and install over it.
Sent from my Desire HD using xda premium
SEK610i said:
Hello, so I am new user of Huawei U8800 and I succeded to install Aurora ICS on it, but now I would like to try CM7. But I don't know how to get back to Froyo and then from Froyo to CM7 (as it says in CM7 install instructions?
Thanks for help.
Click to expand...
Click to collapse
If you want to install CM7 (.32) you need to downgrade to froyo but if you want (.35) you can install it over Aurora.
Sorry but can I ask why to revert back to froyo from Aurora?
Somcom3X said:
Just format system and data and install over it.
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
That would not work.
Find official froyo
Unzip it and put into your sdcard like /dload/update.app
Close your phone.
Press vol+ vol- and power and keep until update screen.
After the successful froyo downgrade root it.
Copy cwm
Install cm7.
That simple.
Sent from my U8800
entrapmen said:
That would not work.
Find official froyo
Unzip it and put into your sdcard like /dload/update.app
Close your phone.
Press vol+ vol- and power and keep until update screen.
After the successful froyo downgrade root it.
Copy cwm
Install cm7.
That simple.
Sent from my U8800
Click to expand...
Click to collapse
This only need for Cm7.32
If you want to CM7.35, just install on top aurora with full wipe
Mahdial said:
If you want to install CM7 (.32) you need to downgrade to froyo but if you want (.35) you can install it over Aurora.
Sorry but can I ask why to revert back to froyo from Aurora?
Click to expand...
Click to collapse
I won't downgrade to Froyo, I just wan't to try CM7, and in CM7 install instructions downgrading to Froyo is mentioned, so I tought I will have to downgrade to Froyo and then install Cm7.
Thanks for all answers, will try installing CM7 35 right now.
EDIT:Can someone link me to CM7 .35 thread?
Sent from my U8800 using Tapatalk 2
There are atleast three dev topics in the forum. One from genokolar and if i am not wrong there is a kernel dev for ezet's cm7.2 .32 by Paul*.
But... All of them are onhold or ended dev. And they all have bugs. So. What i am trying to say is if you want bug free cm7 then you should try ezet's .32
Sent from my U8800
entrapmen said:
There are atleast three dev topics in the forum. One from genokolar and if i am not wrong there is a kernel dev for ezet's cm7.2 .32 by Paul*.
But... All of them are onhold or ended dev. And they all have bugs. So. What i am trying to say is if you want bug free cm7 then you should try ezet's .32
Sent from my U8800
Click to expand...
Click to collapse
Installed .32 yesterday, and I am really happy with it. Thanks everone for helping me. :good:
SEK610i said:
Installed .32 yesterday, and I am really happy with it. Thanks everone for helping me. :good:
Click to expand...
Click to collapse
What's the main differences between Aurora and CM7.2 in your opinion?
Cause I want to go to Aurora though.
Mahdial said:
What's the main differences between Aurora and CM7.2 in your opinion?
Cause I want to go to Aurora though.
Click to expand...
Click to collapse
Sorry, for late answer...I didn't see any major differences...actualy I was more pleased with aurora, but I always got atleast 2 reboots a day on Aurora, so thah is the reason I tried CM7.
Now I have one more question...How do I get to stock GB now? I changed recovery.img when I was installing CM7, so do I need to change recovery.img to stock, and then "update" with official GB, or can I just directly "update" to official GB without changing recovery.img to stock before?
Thanks for your help
SEK610i said:
Sorry, for late answer...I didn't see any major differences...actualy I was more pleased with aurora, but I always got atleast 2 reboots a day on Aurora, so thah is the reason I tried CM7.
Now I have one more question...How do I get to stock GB now? I changed recovery.img when I was installing CM7, so do I need to change recovery.img to stock, and then "update" with official GB, or can I just directly "update" to official GB without changing recovery.img to stock before?
Thanks for your help
Click to expand...
Click to collapse
Update with dload folder of the GB, it will give you the stock recovery after completed the update.
Sent from my U8800 using xda app-developers app