[Q] need your help: mytouch 1.2 problem! - myTouch 3G, Magic General

Hi all.
I had a problem with my Mytouch 3g 1.2, its from Tmobile but i put a wrong system on it the roger which main ver is 3.05.631.7. Now i can't put any rom into my phone because the tmobile 1.2 stock rom is lower than 3. I dont know what should i do now, i need some suggestion. Here are some detail of my phone:
SPL/hboot version: 1.76.0008.
Radio version: 6.35.08.29.
Main software version: 3.05.631.7.
cid: t-mob010.
cpld: 13.
product: sapphire.
mid: sapp31000.
security: on.
build-mode: ship.
-----------------------------------.
Print of device info SUCCESSFUL.
This device does not have s-off nor eng hboot.
Best Regard.
Thanh
p/s Sorry about my English!

Read this: http://forum.xda-developers.com/showthread.php?t=1545935
He has similar problem.
p.s. The better way: go to repair-shop and ask master for restore SPL via JTAG.

5[Strogino] said:
Read this: http://forum.xda-developers.com/showthread.php?t=1545935
He has similar problem.
p.s. The better way: go to repair-shop and ask master for restore SPL via JTAG.
Click to expand...
Click to collapse
Thank you. I will try one more week if nothing happen .. repair shop is the best way.

Is this still a problem?

Related

how to start unlocking xda 1

pls help me unlock my xda1. what tools will i use?
here's the device information:
ROM VERSION: 3.14.40ENG
ROM DATE: 11/26/02
RADIO VERSION: 6.18
MODEL NO. PW10B1
PLATFORM: POCKET PC
tnx.
www.xda-developers.com/XDAunlock/
tnx for the reply!. does my xda specification qualify to be unlocked using xdaunlock? i haven't tried unlocking some smart phones, its my first try. does it involve any reprogramming the bios or something? thnx!
Just go to
http://wiki.xda-developers.com/wiki/UnlockWiz
and follow the steps.
Thats all.
Greetings, Kaputter :shock:
i tried xda unlock, but it says error getting unlock code... what will i do now... im badly in need of some expert help here...
then you need to flash your ROM with SER v 1.2 which will unlock your device with the first boot
I'm trying to unlock my old XDA, I have foolwed the instructions given on this site but nothing seems to work......HELP!!!!!
The device information is as follows:
ROM version: 3.17.03 ENG
ROM date: 05/15/03
Radio version: 4.20.00
Protocol version: 32554
Trying it via the USB sync.
Any suggestions??
Unlocking XDA 1
I have read and read and read the forum on how to unlock my XDA 1 (XDA II was a sinch!) but the XDA 1 is causing problems. I started with the error below and tried upgrading my ROM - getting error messages on not being able to unlock and that I needed W Modem.
Can upgrade using SER 1.2 without a unix box, then unlock all using the USB cradle?
Hope someone can explain in even more simple terms
Appreciate it!
I notice that ser 1.2 works with TMobile in the USA but doesnt say anything about ATT Wireless.
Should I infer that the ser 1.2 isnt a good idea then?
My PocketPCPE is :
ROM:A.30.09
Rom Date: 01/01/04
Radio version: A.33.02
Protocol version: 1.3.3
Unit is a wallaby PW10B1
Thanks for any advice you can give.
Flash your xda using ser 1.2, this will unlock the xda, I suggest backing up your existing rom to sd card or using xdatools, once you have flashed the xda you can then restore your original rom using the sd card method. Using sd card method overcomes any country id/incompatible rom errors.
A Unix box is not needed, just a standard pc.
Flashing with SE1.2 isn't always enough. I've got an XDA-1 from T-Mobile that shipped with the following:
ROM 4.01.16ENG
RS 6.25.02
Flashing it to SE1.2 worked fine, but the XDAUnlock gave same "Error...unlock code" msg others have seen.
I'm very hesitant to get into RS flashing (for obvious reasons) but there really doesn't seem to be any other way around it in this case. Then again, I worry even that won't really solve the problem (e.g. if I go back to 6.25.02 RS won't the problem potentially just return?).
Hoping for some help unlocking it without RS flashing.
You could try xda manipulator and a serial cable, otherwise I think radio stack will need to be changed, before doing ANYTHING with the radio stack please read on this forum all the problems you may encounter, hopefully there will be a solution for you among these pages.

Problems with my p3600

--------------------------------------------------------------------------------
Hi guys!!
my uncle came from europe and left his p3600 with me, here in Brazil, i tryed the unlock solution from pof but it still locked..
first i use the unlock tool, with AUTO_Unlock_v1.bat, then i flashed a new room(3.1.2c.AX3L), then turn it off, 10 seconds, turn on and nothing, i notice that when i start my p3600 it gives me this information:
M:05
B:05
D:3.00
R:NONE
G:NONE
And i notice this too:
Settings>System>Device Information>Version:
ROM version: 3.1.2c.AX3L
ROM date: 07/24/07
Radio version: NONE
Protocol version: NONE
Settings>System>Device Information>Identity:
Model No:TRIN100
Platform: PocketPC
IMEI: (blank)
Can you guys help me unlock my "new" p3600
thanks a lot!!
PS: sorry if i post this in the wrong place, im new here
and i tried flash from minisd all of them (hardspl,radio,cooked rom, unlock) but still same thing: radio version NONE protocol version NONE please some one help me..

radio version none

guys!!
my uncle came from europe and left his p3600 with me, here in Brazil, i tryed the unlock solution from pof (xda-developers) but it still locked..
i tried flash several radio roms and roms, hardspl etc.., i notice that when i start my p3600 it gives me this information:
M:05
B:05
D:3.00
R:NONE
G:NONE
And i notice this too:
Settings>System>Device Information>Version:
ROM version: 3.1.2c.AX3L
ROM date: 07/24/07
Radio version: NONE
Protocol version: NONE
Settings>System>Device Information>Identity:
Model No:TRIN100
Platform: PocketPC
IMEI: (blank)
After flash several radio roms and rom still same thing: IMEI blank, protocol version NONE and radio version NONE
Can you guys help me unlock my p3600
thanks a lot!!
The problem started this rom P3600_WM6_1[1].1_WWE_ADW_incl_RADIO
After passing both rom hardspl now this with the same issue of a topic appears on the fast him "no gsm" I will try to resolve some three more days if not dead and PocketPC

[Q] Mytouch 3G. Need assistance with Root.

Here's the info from my information page on the phone:
Model: T-Mobile myTouch 3G
Firmware version: 1.6
Baseband version: 62.50sc.20.17U_2.22.23.02
Kernel version: 2.6.29-g023e5c9, [email protected] #3
Build number: 2.10.531.4 CL119339 release-keys
Also, it has the jack on the top of the phone.
I'm having trouble finding a How-To for this phone. Some sites say
don't do this on 1.6, others say don't do this if you have the jack.
McCordRM said:
Here's the info from my information page on the phone:
Model: T-Mobile myTouch 3G
Firmware version: 1.6
Baseband version: 62.50sc.20.17U_2.22.23.02
Kernel version: 2.6.29-g023e5c9, [email protected] #3
Build number: 2.10.531.4 CL119339 release-keys
Also, it has the jack on the top of the phone.
I'm having trouble finding a How-To for this phone. Some sites say
don't do this on 1.6, others say don't do this if you have the jack.
Click to expand...
Click to collapse
What spl and radio do you have?
Power off your phone.
Hold volume down + power button while starting.
You should see a white screen.
Type out everything on that screen here.
Wait for a reply.
One thing I can tell you its probably a 32a phone if it has the 3.5mm jack on top of the phone.
heres a link to help you out. otherwise there is turn of info on ROM and rooting the 32a
http://wiki.cyanogenmod.com/index.php?title=HTC_Magic_(32A):_Rooting
Universal Androot is probably your best option, install the app, root/unroot with the click of a button.
Sapphire PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
Radio-2.22.23.02
Oct 21 2009,22:33:27
HBOOT
<BACK> FastBoot Mode
rrrichw said:
Universal Androot is probably your best option, install the app, root/unroot with the click of a button.
Click to expand...
Click to collapse
Agreed.
McCordRM said:
Sapphire PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
Radio-2.22.23.02
Oct 21 2009,22:33:27
HBOOT
<BACK> FastBoot Mode
Click to expand...
Click to collapse
Try this.
http://forum.xda-developers.com/showthread.php?t=764530 EASY
Or this...
http://wiki.cyanogenmod.com/index.php?title=Full_Update_Guide_-_Fender/1.2 Advanced (old fashioned way)
Also... just FYI, you have a MyTouch 1.2, which requires 32B radios and roms and your stock spl (s-on). As of today December 29, 2010, you must have this. An Eng SPL (s-off) will not work and other radios are too risky and offer nothing different performance or reception wise. Always treat your phone as a 32B or you might break your phone.
Er... even though the phone says 32A on that screen you sent me to?
EDIT
Also, what ROM do I use? I went here: http://forum.cyanogenmod.com/files/category/1-stable-mod/
and I don't see my Mytouch 1.2 in the list.
McCordRM said:
Er... even though the phone says 32A on that screen you sent me to?
EDIT
Also, what ROM do I use? I went here: http://forum.cyanogenmod.com/files/category/1-stable-mod/
and I don't see my Mytouch 1.2 in the list.
Click to expand...
Click to collapse
Trust me. I have the same device. It says 32A but it's a 32A/32B hybrid. The only thing that is 32A is the RAM.
Use roms made for G1/MyTouch 32B devices.
Google G1 isn't in that MOD list, either.
McCordRM said:
Google G1 isn't in that MOD list, either.
Click to expand...
Click to collapse
(Facepalm)
http://forum.xda-developers.com/forumdisplay.php?f=448
The G1 = HTC Dream.
Like MyTouch 3G = HTC Sapphire.

stock rom for htc __622

hi
please help me
i need stock rom link for htc m9 plus
CID : HTC __622
htc_hiau_ml_tuhl pvt S-ON
LK-1.01.0000
OpenDSP-Unknown
os-1.84.708.10
Aug 12 2015, 16:47:53(573107)
Hi,
I have been looking for the same for a while now.
Want to flash my phone back to stock but can't find anything for the CID: HTC__622
Me either
GuillenR said:
Hi,
I have been looking for the same for a while now.
Want to flash my phone back to stock but can't find anything for the CID: HTC__622
Click to expand...
Click to collapse
Me either.
Im using CID: HTC__622.
I was S-off. So, I flashed with Taiwanese HIAUR_ML_THUL_XXXX_signed.zip with CID - 111111. This was works excepet No sim card problem (cannot recognize sim card) and finger print is dead.
So, right now there's no solution but waiting for New HongKong RUU.

Categories

Resources