Related
Hi,
Have next problems. After every power-on:
1. opens outlook mail;
2. have keyboard and main buttons locked. Stilus-screen is OK.
after pressing e (internet explorer)button or comm.manager buttons everything is OK;
3. pressing center button in d-pad opens ScreenAlign (as after hardreset), and after completing this continues normally as expexted;
4. cann't hard reset, because Send button don't operates as p.2 above.
It is Qtek 9100 orign.
Have flashed Qtec, T-mobile and Jam latest roms, exact same behavior
Can anybody help?
And sorry my poor english language.
Tiit
Damn...
My wizard acts exactly the same..... I've spent couple of hours to see if there is any solution of this problem on the forum... Well, there isn't.....:/ NOONE wrote a single word.... Even something like "there is no way to fix it, flush your wizard in the toilet"... Experts...
I'm sorry for being so annoyed, anyway i still request for help and I would be grateful if someone could give a tip
try to flash one of the 6 or 6.1 ROMS perhaps? If that doesnt fix it, then I dont know what to tell you!
I have this issue too. The only thing that works is to keep pushing on, under and around the Lock button on-screen. It will eventually unlock itself but it takes quite a lot of tapping
Hi,
I've managed to kill my Orbit 2! Everytime it starts up it gets as far as the Windows Mobile splash screen then shows the volumn control (both levels turned down) but goes no further. The power button still turns the screen on and off and the screen still dims after a while with any key bringing it back to full brightness, but nothing happens!
Has anyone else had this problem?
Also, I've looked in the forums, but can't find details anywhere of how to hard reset this phone! The only instructions I've found relate to non-existent buttons!
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
Can anyone shed any light on why this is happening or how to hard reset!
Thanks in advance,
Nick
it is the bottom two buttons (below the answer & hang up) and the stylus for a soft reset.
When it asks for a confirmation hit the green answer button
Hope this helps
Thanks NC35 - that did the trick!
Luckily I backed it up on Sunday so shouldn't have lost too much!
Thanks
Having tried ( now three times with no help ever) to speak to O2 and ask how to hard reset following the start menu completely failing..... I was told it was "impossible" you will need to return it and use the "28 day" repair service.....
I have at last managed to restore - thanks to this posting!!
No comes the reseting process - which is a bit of a bore!!
O2 seem to have dispensed with any actual tech support at all!!
Dave
The procedure of performing hard reset is perfectly explained in the manual that comes with the phone. "hard reset" is included in the index of this manual, so it takes only a couple of minutes to find out what you have to do.
After all, RTFM ;-)
bizon said:
The procedure of performing hard reset is perfectly explained in the manual that comes with the phone. "hard reset" is included in the index of this manual, so it takes only a couple of minutes to find out what you have to do.
After all, RTFM ;-)
Click to expand...
Click to collapse
Now, thats not very hepful is it, especially when you're away on business for a few weeks and don't happen to carry the manual with you everywhere you go...
nid
i killed my o2 xda orbit II as well, but unable to hard reset
sorry guys. I vae the same porblem as nick666 with my xda orbit II. however, hard reset failed!! the window splash screen came back after I hit the green button & it becomes static. I am really worried now. I have done so many paperworks with that xda..anybody please help!!
honeyyati said:
sorry guys. I vae the same porblem as nick666 with my xda orbit II. however, hard reset failed!! the window splash screen came back after I hit the green button & it becomes static. I am really worried now. I have done so many paperworks with that xda..anybody please help!!
Click to expand...
Click to collapse
calm down. read this: http://forum.xda-developers.com/showthread.php?t=381600
most likely flashing another rom will fix your problem
I have downloaded the hard-spl. I'm completely stuck. I can't connect my pda to activesync. activesync didn't detect my pda. by the way, when I reset the pda, screen that asked to press SEND for restore to factory setting turn up few minutes after resetting. press green button, screen automatically shows windows mobile startup screen. I'm still stress, |I'm sorry but I can't helped it..
sorry guys. I have read the instruction wrongly. now it works fine.
many thanks cr1960 who has kindly response to my silly worries
thnaks again.
honeyyati said:
sorry guys. I have read the instruction wrongly. now it works fine.
many thanks cr1960 who has kindly response to my silly worries
thnaks again.
Click to expand...
Click to collapse
NP. Glad you got your problem sorted
I have an 8125 Wizard with WM6 RC5.
The phone was working fine until about a week ago.
Now the smart keys do not work but randomly start working after I press the key on the left above the volume control...as if it activates them. The messaging and internet keys never work anymore.
On the keyboard. it works sometimes and sometimes it doesnt. When it does not all the keys work...a few letters do not respond.
When the phone screen is activated by pressing power button when phone is on "hibernating mode" the today screen opens...then after about 1 second the software configered to the Email softkey opens and then closes.
Can anyone help...I have reset the device using clear storage...would I need to Hard reset, will that help. I had battery status installed and it also overclocked to 247....could that be a reason. I have now removed battery status. PLS HELP
the problem is very similar to this:
http://forum.xda-developers.com/showthread.php?p=2018535
the problem is very similar to this:
http://forum.xda-developers.com/showthread.php?p=2018535
so pls does any1 have a solution
Two things:
First, remember this is a bulletin board. Sometimes it takes time for people to get around to reading your post. Sometimes, 50 people will read your post before someone will bother to answer, and even then, the answer may not be a solution to your particular problem.
Second, as you saw on the other threads, I recommend opening and cleaning your button contacts. People are constantly surprised by the need for this, but if you have anything resembling an active life, you probably need to do this about once every six months.
hello all, today it was the first time i leave my hd2 screen off for more than 3 hours, and when i want to turn on the screen after that, it wont and it stay black, no touch and no hardkey will turn on the screen, any solution for that?
vuedesprit said:
hello all, today it was the first time i leave my hd2 screen off for more than 3 hours, and when i want to turn on the screen after that, it wont and it stay black, no touch and no hardkey will turn on the screen, any solution for that?
Click to expand...
Click to collapse
It's a known issue. Sometimes a long press of the end-call button will bring up the display, but that's rare. It normally needs a soft-reset/battery out to reboot the phone.
It's obviously a software issue as the buttons light up when you press them, then turn off when they time-out, and then light up when pressed again, so the OS is still running happily in the background.
during my search and tries for applications and tweaks for the device, i remember i saw something that assign a display wake up on the long end press, and something that wake up on shaking the device, is there any confirmation if these tools solve this issue?
vuedesprit said:
during my search and tries for applications and tweaks for the device, i remember i saw something that assign a display wake up on the long end press, and something that wake up on shaking the device, is there any confirmation if these tools solve this issue?
Click to expand...
Click to collapse
Nope - try them. You could be the hero that confirms it
johncmolyneux said:
It's a known issue. Sometimes a long press of the end-call button will bring up the display, but that's rare. It normally needs a soft-reset/battery out to reboot the phone.
It's obviously a software issue as the buttons light up when you press them, then turn off when they time-out, and then light up when pressed again, so the OS is still running happily in the background.
Click to expand...
Click to collapse
Today was my turn to have that issue. Unfortunately :-(
I 've been looking for an answer, but there is no solution. Just a thread that talk about that the issue is caused by SD-card, corrupt files, formatting issue...
Please, do we have any solution for that issue? it started this morning and I have it 4 times today.
cybermo said:
Today was my turn to have that issue. Unfortunately :-(
I 've been looking for an answer, but there is no solution. Just a thread that talk about that the issue is caused by SD-card, corrupt files, formatting issue...
Please, do we have any solution for that issue? it started this morning and I have it 4 times today.
Click to expand...
Click to collapse
hmm. happened to me today. don't know what caused it.
I had this problem today as well for the first time. I thought it was to do with having the animated weather wallpaper and having rain. Today for the first time I had it predicting rain and my Leo kept saying "Loading touch sense" when coming out of lock. It's never done that before.
Then after an hour of lock it refused to wake, despite the physical keys lighting up.
I had this problem also today as well for the first time! But twice, so basically the first time and second time
First time phone wouldn't go on, touching the screen, hitting the spot where the lockslider was (in the dark), pressing short or pressing long on hard-buttons. The phone didn't respond at all.
Second time the hard-keys would light up, but phone refused to wake.
I had this problem.
Solution: Download an app called MemMaid and use the settings in post #75:
forum.xda-developers.com/showthread.php?t=596484&highlight=settings&page=8
For me it was the Disable Auto Device Lock.cab (in combination with windows exchange server) that caused the frequent HD2-doesn't-wake-up problem.
I uninstalled it and it is working fine again.
Have a look here, the exact same problem was discussed :
http://forum.xda-developers.com/showthread.php?p=5386344#post5386344
Aaargh. Just happened to me again. So that's twice today.Locked it with Opera open. Went to toilet. Came back and Leo wouldn't come back. Again the physical keys were lighting, but the screen stayed dark.
I'm running standard ROM that came with phone, 1.48.405.2 and then official hot fixes on top. Only using apps that came with the phone too.
Not done any tweaking besides cosmetic through the standard phone options.
guys let's try to focus here, we all have/had this issue. So let's try to remember what's the last things we dis so we can find the common cause so we can identify it.
Well I said in my post above, I read (don't remember where! ) that the problem is related to the microSD card.
Was logical for me, because I kept copying, deleting, copying tow large files large files in parallel, I mean I stressed my microSD. By the way it's the one provided by HD2 with the copilot in it.
What I've done, is that removed the microSD for a while and there were no freeing again for like 4 hours, and it was with screen off for like 1 hour and half, come back from the fitness, and it's ok.
Once back home, I backed up all my MicroSD to my computer, then formatted it with HD2. After that I copied back all my data to my micrSD. So far so good.
hint: what's the official SD Card Storage Cards hotfix from HTC for?
I was running an older Paramid version of dunphp's ROM, and right before swtching the ROM my touch screen start to not function. I could not pull the ring up to unlock the screen. I rebooted multiple times. Cleared Dalvik and fixed permissions. It finally worked after attemptiing to unlock it for what seem like abother 500 times.
I was going to change over to his latest Deisre HD ROM anyway. So I did a Task 29, and cleaned and reinstalled everything from scratch. It worked perfectly for about 5 days. Now I am getting the same issue with my touch screen. It just seems to go out. Is this typically what happens when it's about to die?
Never mind. I Task29, and flashed a Windows Mobile ROM just to see, and yeah...it's dead...
cmajewsk said:
Never mind. I Task29, and flashed a Windows Mobile ROM just to see, and yeah...it's dead...
Click to expand...
Click to collapse
You have semi-dead digitizer. But it is nothing you can't temporarily fix every time it happens. Just push red (end call) button really hard for a while and it will get fixed for a while. I recommend you using button savior and lock screen with it and unlock with any other button than red one, it should be permanently fixed then. Please hit the thanks button if I helped you.
lolkoz said:
You have semi-dead digitizer. But it is nothing you can't temporarily fix every time it happens. Just push red (end call) button really hard for a while and it will get fixed for a while. I recommend you using button savior and lock screen with it and unlock with any other button than red one, it should be permanently fixed then. Please hit the thanks button if I helped you.
Click to expand...
Click to collapse
I hit the thanks button as you gave me hope. I am currently using my old TouchPro 2 with an old NRG Titanium Rom on it for the time being, but will try this today. I’ll install “button savior”, but what am I supposed to do with the app? What settings do I run? I think you are totally right about this, as I noticed when I was unlocking my phone, using the green call button worked most often, but now that’s not even working.
cmajewsk said:
I hit the thanks button as you gave me hope. I am currently using my old TouchPro 2 with an old NRG Titanium Rom on it for the time being, but will try this today. I’ll install “button savior”, but what am I supposed to do with the app? What settings do I run? I think you are totally right about this, as I noticed when I was unlocking my phone, using the green call button worked most often, but now that’s not even working.
Click to expand...
Click to collapse
Yes, I have exactly the same problem as you have. My phone was working flawlessly for like a year and a half, but last week all of a sudden the touchscreen sometimes didn't work and sometimes it did. So I tried literally everything, I was fixing my permisions all the time, wiping dalvik, task29, remaking parrtitions, even bought a new sd card. But few days ago I found a solution, by pushing red button really hard (because the digitizer is right behind it) and not using it after. The Button Savior app is a simple app that makes a very little transparent icon on your screen and when you tap it, the menu of buttons will come up (with the same buttons as your hard buttons on your device) so every time you will want to lock the device you will do it on your screen, and won't have to push the hard button and come through all the hassle of pushing the digitizer. I really hope I helped you, as this very same problem was driving my crazy for the past few days.
lolkoz said:
Yes, I have exactly the same problem as you have. My phone was working flawlessly for like a year and a half, but last week all of a sudden the touchscreen sometimes didn't work and sometimes it did. So I tried literally everything, I was fixing my permisions all the time, wiping dalvik, task29, remaking parrtitions, even bought a new sd card. But few days ago I found a solution, by pushing red button really hard (because the digitizer is right behind it) and not using it after. The Button Savior app is a simple app that makes a very little transparent icon on your screen and when you tap it, the menu of buttons will come up (with the same buttons as your hard buttons on your device) so every time you will want to lock the device you will do it on your screen, and won't have to push the hard button and come through all the hassle of pushing the digitizer. I really hope I helped you, as this very same problem was driving my crazy for the past few days.
Click to expand...
Click to collapse
Nah, that didn't work...my digitizer must be completely dead. I held the Red Button for a while and holding it down really hard...made no difference..oh well guess a dumb phone until the Prime comes out....thanks anyway.
cmajewsk said:
Nah, that didn't work...my digitizer must be completely dead. I held the Red Button for a while and holding it down really hard...made no difference..oh well guess a dumb phone until the Prime comes out....thanks anyway.
Click to expand...
Click to collapse
Aww, that's a shame. I really tought it would help. It doesn't work every time, maybe you can try it few more times. If it's not even then going to work, then maybe you should get your digitizer replaced.
Cheers
lolkoz said:
Aww, that's a shame. I really tought it would help. It doesn't work every time, maybe you can try it few more times. If it's not even then going to work, then maybe you should get your digitizer replaced.
Cheers
Click to expand...
Click to collapse
How long do you hold the red button? Also, I am pushing down really hard. I didn't know you could get the digitizer replaced...I wonder who would do that (no way would I send it to HTC and wait a month), and how much that costs...?
HTC sends phones back crazy quick. Atleast that's how it was for me. They actually sent it back the day they got it from what I remember. It did take a while though for the phone to arrive to HTC (this depend who and from where you send it though) If your phone still has warranty I seriously recommended you send it yo HTC. Just remember to flash it 100% stock before sending it.
Sent from my HD2 using XDA App
Well believe it or not, after pressing the Red phone off button for an eternity and applying a ton of pressure, it's working. I am sure it won't be for long. I have a shortcut to lock the phone on the screen. So basically your saying I should stay away from hitting the Red phone off button, or else that will kill it again? What about the other hard buttons?
I am in the UAE at present, so it might be better for me to just order a digitizer and do the repair myself. I see there are a lot of YouTube videos on the subject.
Thanks everyone for your help!