speed and response on vista at shift is really slow.
any chance to install xp on it?
This is something I am interested in as well.
I am ordering a HTC shift today when it arrives I try and will make a image of the hardrive/vista and then try loading XP to see.
Just go ahead and load XP, you can always restore Vista from the hidden backup partition on the drive.
Bear in mind that HTC are unwilling to release the needed drivers for Vista, let alone XP.
XP Tablet Edition
I have already done this and it's a breeze.
However you have no functionality for touch as the drivers are not there.
But on XP you have 800MB RAM free and it's like lightening...
Let's hope we can get XP drivers for the touch screen, i can live without the snapvue and control etc and without the origami thing, but i have gone back to vista due to the lack of touch ability.
Regards
Blitz
Was the touch pad working in xp? as that might be livable. It should be possible to sort out a dual boot then we can have the three operating systems on the one device, vista, winxp and windows mobile.
dual boot
tried that by partitioning drive in two but it breaks vista,you need to install xp then vista but you can't do that either as you miss the builtin drivers for vista.
the mousepad worked fine
besides the touch screen, is there any other hardware component that does NOT work under XP? i was under the impression that lacking XP drivers, a bunch of stuff did not work.
blitzspear said:
tried that by partitioning drive in two but it breaks vista,you need to install xp then vista but you can't do that either as you miss the builtin drivers for vista.
the mousepad worked fine
Click to expand...
Click to collapse
Hey blitzspear, I have managed to get XP working alongside the HTC vista oem install. First you boot into in to vista and shrink the current drive c using disk management mmc, then reboot into xp install using usb cd. After XP completes Copy bootsect.exe from the boot folder of a Windows Vista DVD and paste it into your Windows XP Windows\system32 folder. Then in XP CMD issue the following command bootsect /NT60 ALL. Ok now the only issue I have is getting all the drivers, where did you get the drivers from? I have downloaded the XP drivers for the graphics card ironically the file is called winvista_1523.exe althoughintel webpage assures that this driver covers vista xp 2k etc. but it dont work! So just wondering if you could point me in the right direction
Drivers
Sadly I didn't find them all...
Only ones are the intel VGA (which disables some of the resolutions)
A usb network and sound and the synaptics mousepad.
The rest were missing which is why i'm back on vista.
Regards
Blitz
PS - I think if we get SD / wifi / GPS / in WM6 this will do what i need it to do and then i'll keep vista when plugged in so i can have it on best performance instead of balanced mode. This may be the best compromise for many people.
But in my opinion HTC could have made this SOOOO much better if they'd put Tablet XP on it... or gave us 2GB of RAM in VISTA...
Device Manager?
Can you guys post a list of devices that were not installed correctly when in XP? I see that the touch screen doesn't work...do we have other devices that were not identified or functioning properly in the device manager?
If we can identify the devices maybe the chipset manufacturer can supply drivers, etc.
ltxda said:
Can you guys post a list of devices that were not installed correctly when in XP? I see that the touch screen doesn't work...do we have other devices that were not identified or functioning properly in the device manager?
If we can identify the devices maybe the chipset manufacturer can supply drivers, etc.
Click to expand...
Click to collapse
I actually got most of the devices working (HTC ones)by searching the inf directory of the original Vista installer. However touchscreen is not identified or does not work, the SDIO Wifi card is not seen by XP at all, although BT works
hi. i have connect my blackstone with a usb to the printer but is not working. what i have to do?
to connect to usb devices require 2
things
1. the pda have to support usbHost pretty sure that blackstone don't
2. all the correct windows mobile drivers for the printer very very few printer makers make windows mobile drivers at all
Ok, not what you've asked for but there are some solutions for printing from Windows Mobile devices, mostly these are not free, and as having no need to print I have not tested these:
Westtek Jetprint $9.95
http://www.westtek.com/pocketpc/jetcet/
Bachmann Software Printboy $49.99
http://www.bachmannsoftware.com/pbce.htm
PrintPocketCE $39.95 ("Prints in Color" lol)
http://www.fieldsoftware.com/PrintPocketCE.htm
Cortado Print & Fax (Ca$h per month I think)
http://www.cortado.com/euen/OnlineServices/PremiumServices/forWindowsMobile.aspx
HP mobile printing for pocket pc
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=242184&prodNameId=235049&swEnvOID=2008&swLang=8&mode=3&taskId=135&swLang=8&swItem=ja-36647-1 but they have stopped letting people download, so I found a mirror here: http://handheld.softpedia.com/get/System-Utilities/Printing/HP-Mobile-Printing-8678.shtml OK just tried this one and while it did work on my Dell Axim x30 (about 4 years ago) it doesn't work on my TD2, installs but bring up an error.
Most of these seem to have been designed for versions of WM prior to WM5, so actually I think that means PPC2003 !?!
Also keep an eye out for these guys, http://printershare.com/mobile.sdf they have iphone & Android versions (bit of a bandwagon jumping on there I think!), would assume WM version wouldn't be too far behind?
I thought our Touch HD comes with "Jetcet Print 5"
With that software you can print via WiFi or bluetooth.
What you need is a pure network printer or a PC which shares the printer you want to use.
Works like a charm on my Touch HD
greetz
playdo
playdo said:
I thought our Touch HD comes with "Jetcet Print 5"
With that software you can print via WiFi or bluetooth.
Click to expand...
Click to collapse
I thought it doesn't support wifi..
thanks guys
I read good review about Acer W500 and people installing Windows 8 on it. I just bought a used Iconia W500 with the attention to tryout W8. However the tablet package I got does not have any document or CD (restoration CD I assume) with it.
When power up, Win 7 show up, I tested a little bit and quite disappointed with the performance on both the Acer tablet and Windows 7 on it. It is far down away company to Dell Streak 5 and Samsung Galaxy S II.
Questions to the experts:
1. Should I upgrade the tablet (hardware perspective) so that it can run faster? Or just exchange with other brand name tablets, which has more power?
2. I still want to stick with Windows 7 or 8, because of the nature of my works. I need windows. What other android tablet which allow me to install windows 8 on it?
3. As for the Iconia W500 I have right now, please guide me how to back up Windows 7 first? What software do I need to make the back up the entire OS? I do have portable USB external drive about 500 GB. I also have USB portable DVD drive.
Thanks
Alpharetta
1. Should I upgrade the tablet (hardware perspective) so that it can run faster? Or just exchange with other brand name tablets, which has more power?
Upgrade
Hi, keep in mind that windows 7 and the windows 8 developer edition does not support ARM processors (windows 8 will, soon). The processor in the tablet you have now must be a x86 processor for it to be running windows 7.
Also, check the start menu for restoration media creator or something of the like. Machines nowadays do not come with restore media. But they do come with a program to create that restore media.
Sent from my SAMSUNG-SGH-I777 using xda premium
I installed Win8 on my HP Mini 500 and there is a performance increase across the board.
Boot up is faster
Ribbon explorer makes it really easy for touch
Win8 has a dedicated keyboard for tablets
Less system resources used by junk processes
alpharetta said:
I read good review about Acer W500 and people installing Windows 8 on it. I just bought a used Iconia W500 with the attention to tryout W8. However the tablet package I got does not have any document or CD (restoration CD I assume) with it.
When power up, Win 7 show up, I tested a little bit and quite disappointed with the performance on both the Acer tablet and Windows 7 on it. It is far down away company to Dell Streak 5 and Samsung Galaxy S II.
Questions to the experts:
1. Should I upgrade the tablet (hardware perspective) so that it can run faster? Or just exchange with other brand name tablets, which has more power?
2. I still want to stick with Windows 7 or 8, because of the nature of my works. I need windows. What other android tablet which allow me to install windows 8 on it?
3. As for the Iconia W500 I have right now, please guide me how to back up Windows 7 first? What software do I need to make the back up the entire OS? I do have portable USB external drive about 500 GB. I also have USB portable DVD drive.
Thanks
Alpharetta
Click to expand...
Click to collapse
I got a W500 for Christmas and a 64gb hard drive. I immediately swapped out hard drives before the first boot and put Windows 8 on it. I love this machine with Windows 8. I didn't load any of the Acer bloatware and only loaded what I had to have. It is speedy and very responsive. Windows 8 dp has a lot of room for improvement, but is better than Windows 7 for this machine. Everything works as it should and I don't see any reason to put Windows 7 on it.
beartrap said:
I got a W500 for Christmas and a 64gb hard drive. I immediately swapped out hard drives before the first boot and put Windows 8 on it. I love this machine with Windows 8. I didn't load any of the Acer bloatware and only loaded what I had to have. It is speedy and very responsive. Windows 8 dp has a lot of room for improvement, but is better than Windows 7 for this machine. Everything works as it should and I don't see any reason to put Windows 7 on it.
Click to expand...
Click to collapse
Is socialite working?
sruthika said:
Is socialite working?
Click to expand...
Click to collapse
I hadn't tried until I read your post. No, it is not.
I've just finished swapping to windows8 on my iconia w500
the first thing is It was not so easy.....I've made it from USB drive and swapped for 64bit one.
System is more responsive
Ease of use comparing to Win7 much better
I see that I need bigger HDD the 32 Giga one that it came with was already on 23.7 from 29.8 avaliable in just 3days of use!!! That was on win7
now on win8 and it is on 17.9 after updates.. so not to good not to bad.
i've already found mSATA 64gb for 83£ wich is the cheapest here in Uk
AFAIK thais the only update You can do to your Iconia W500
my opinion swap ssd and go for win8 you will like it more
Regards
I bought a refurbed W500 cheap the other day. I had W8 up and running within about an hour. I didn't bother backing it up first.
Since then, I've done lots of monkey and have learned a great deal.
W8 32 bit seems to be the best way to go. The drivers from Acers site work to get the g sensor and screen rotation stuff working. The only thing that doesn't work correctly is Firefox. You can't click on bookmarks from the touch screen.
W8 64 works but the drivers don't work. There's also no reason to have 64 bit windows running with so little ram.
BTW I installed from an external DVD. The USB method appears to work, but is seems to be more of a pain. I had to buy an external DVD drive and got a writer for $32.
I'm very impressed with the performance. W8 runs great. Almost was recognized by the OS and all I had to do was install drivers for the G Sensor etc.
The Metro stuff is silky smooth.
After an install and a fairly judicious disk cleanup, I have about 20 gb of space remaining. I disabled hibernation to get rid of the enormous hybernation file.
There are still little quirks in W8 but it's not even a beta. I have high hopes for newer builds.
This thing is the tablet I've wanted for a long time. For $368 and the cost of the external drive, I couldn't be happier.
FYI, I also have Ubuntu running on it now and still have 12 GB free.
Greg
FYI, to get the thing to boot to the dvd: Shut down, hold Windows Button and Volume Up and press Power. Took me a while to find that.
geebake said:
I bought a refurbed W500 cheap the other day. I had W8 up and running within about an hour. I didn't bother backing it up first.
Since then, I've done lots of monkey and have learned a great deal.
W8 32 bit seems to be the best way to go. The drivers from Acers site work to get the g sensor and screen rotation stuff working. The only thing that doesn't work correctly is Firefox. You can't click on bookmarks from the touch screen.
W8 64 works but the drivers don't work. There's also no reason to have 64 bit windows running with so little ram.
BTW I installed from an external DVD. The USB method appears to work, but is seems to be more of a pain. I had to buy an external DVD drive and got a writer for $32.
I'm very impressed with the performance. W8 runs great. Almost was recognized by the OS and all I had to do was install drivers for the G Sensor etc.
The Metro stuff is silky smooth.
After an install and a fairly judicious disk cleanup, I have about 20 gb of space remaining. I disabled hibernation to get rid of the enormous hybernation file.
There are still little quirks in W8 but it's not even a beta. I have high hopes for newer builds.
This thing is the tablet I've wanted for a long time. For $368 and the cost of the external drive, I couldn't be happier.
FYI, I also have Ubuntu running on it now and still have 12 GB free.
Greg
FYI, to get the thing to boot to the dvd: Shut down, hold Windows Button and Volume Up and press Power. Took me a while to find that.
Click to expand...
Click to collapse
Hey when you say the drivers for 64 bit do not work can you be more specific about what drivers? I installed 64 bit on my touch screen ASUS all in one desktop and it worked, but the touch screen drivers did not work. So it was a very poor experience for me...I mean the whole point is to be more touchscreen friendly....I have not found any solution yet to this issue for my computer and I Was surprised the drivers were not easily identified and working with such a new computer....let me know what you all think. Thanks!
rockhumper said:
Hey when you say the drivers for 64 bit do not work can you be more specific about what drivers? I installed 64 bit on my touch screen ASUS all in one desktop and it worked, but the touch screen drivers did not work. So it was a very poor experience for me...I mean the whole point is to be more touchscreen friendly....I have not found any solution yet to this issue for my computer and I Was surprised the drivers were not easily identified and working with such a new computer....let me know what you all think. Thanks!
Click to expand...
Click to collapse
In the case of the W500, the G-Sensor driver is where the problem lies. It only means that the screen won't auto rotate when you flip it around. I'm sure you don't do that with your all in one desktop so it's probably not an issue common to both models.
The touch screen on the W500 works perfectly out of the box. In fact, the only driver I had to install to make it work was the G-Sensor driver.
Interestingly, I found another issue. In 32 bit W8, Firefox doesn't work completely correctly. When you open a menu (ie bookmarks) you can't use the touch screen to select anything in the menu. Works fine if you use a mouse. However, in 64 bit W8, Firefox works perfectly. So you're left with a choice. Proper screen rotation or correctly working Firefox. I'm sure this will get resolved with either a Firefox update or perhaps the full beta of W8.
I have Iconia W500 for a month now.
If you would like to keep Win7 (for any reason), connect an ext hdd and create a windows image on it, you can restore it later any time.
I installed Win8 32 bit, you will have a completely different experience - Win7 is a S##t on W500.
Installing Win8 is pretty easy --> http://www.microsoftnow.com/2011/09/how-to-install-windows-8-on-acer-iconia-tab-w500.html
BTW: I faced some minor bugs in W8 but on the other hand, you have a decent windows tablet.
Go for Win8 and you will like it
Good luck.
alpharetta said:
I read good review about Acer W500 and people installing Windows 8 on it. I just bought a used Iconia W500 with the attention to tryout W8. However the tablet package I got does not have any document or CD (restoration CD I assume) with it.
When power up, Win 7 show up, I tested a little bit and quite disappointed with the performance on both the Acer tablet and Windows 7 on it. It is far down away company to Dell Streak 5 and Samsung Galaxy S II.
Questions to the experts:
1. Should I upgrade the tablet (hardware perspective) so that it can run faster? Or just exchange with other brand name tablets, which has more power?
2. I still want to stick with Windows 7 or 8, because of the nature of my works. I need windows. What other android tablet which allow me to install windows 8 on it?
3. As for the Iconia W500 I have right now, please guide me how to back up Windows 7 first? What software do I need to make the back up the entire OS? I do have portable USB external drive about 500 GB. I also have USB portable DVD drive.
Thanks
Alpharetta
Click to expand...
Click to collapse
like yourself I also got an acer w500 tablet because I have been reading good reviews about this tablet with windows 8. I bought mine brand new because any tablet after dec 2011 was upgraded to the amd c60 processor, tbh I love it, it is the definition of mobile computing
So to answers your questions
1 only upgrade if you want to spend 1000+ for a tablet as good as the w500
2 stick with windows 8 once you get used to it, its much faster than windows 7 in terms of productivity. And no android tablet will allow the installation of windows.
3 Google will be your best bet for that, because I got mine new, I have all the recovery disks.
Got the W500 less than 2 weeks ago and first thing I did was install Win8RP on it.
Easy as pie. Just extract the Win8ISO directly onto a fresh USB drive and boot off that.
Once Win8 is installed, you will need to install the Gsensor driver from acers site, and the Device Control app to turn on Bluetooth for the first time. (Windows will install the generic BT drivers but they are sorta wonky)
You will want to get the latest ATI Beta drivers (I like them at least) from guru3d.com (The 9.0.0 JUNE base drivers, not to be confused with the 12.X version naming), also the official Realtek drivers from their site (not the Acer ones) and the Atheros Bluetooth drivers from http://www.atheros.cz/ (Just get the DRIVER FILES ONLY download for your OS (x86/64). No need for anything outside of that. To install the BT drivers, just extract the files to a folder, and go into device manager and update all the bluetooth devices it shows by point them to the folder that has the extracted drivers. Once you do that you should be able to turn on and off the Bluetooth from the Wireless tab in Windows 8 Settings and you can delete the device control app from the system.
The Bluetooth remains a bit wonky, My guess because it isnt an official Win8 driver, but it does work for the most part. It may say it cannot turn off the BT on occasion but do it twice and then wait a second, it usually will get the radio disabled on the 2nd try lol.
IM0001 said:
Got the W500 less than 2 weeks ago and first thing I did was install Win8RP on it.
Easy as pie. Just extract the Win8ISO directly onto a fresh USB drive and boot off that.
Once Win8 is installed, you will need to install the Gsensor driver from acers site, and the Device Control app to turn on Bluetooth for the first time. (Windows will install the generic BT drivers but they are sorta wonky)
You will want to get the latest ATI Beta drivers (I like them at least) from guru3d.com (The 9.0.0 JUNE base drivers, not to be confused with the 12.X version naming), also the official Realtek drivers from their site (not the Acer ones) and the Atheros Bluetooth drivers from http://www.atheros.cz/ (Just get the DRIVER FILES ONLY download for your OS (x86/64). No need for anything outside of that. To install the BT drivers, just extract the files to a folder, and go into device manager and update all the bluetooth devices it shows by point them to the folder that has the extracted drivers. Once you do that you should be able to turn on and off the Bluetooth from the Wireless tab in Windows 8 Settings and you can delete the device control app from the system.
The Bluetooth remains a bit wonky, My guess because it isnt an official Win8 driver, but it does work for the most part. It may say it cannot turn off the BT on occasion but do it twice and then wait a second, it usually will get the radio disabled on the 2nd try lol.
Click to expand...
Click to collapse
i just installed the acer drivers for this tablet from acer's website, no issues with Bluetooth, rotation, graphics, audio ect. i think you just downloaded the wrong Bluetooth driver, just get the one from acer along with the device control app, it makes everything a whole lot simpler and it works like a charm, no hangs, drops, ect.
geebake said:
In the case of the W500, the G-Sensor driver is where the problem lies. It only means that the screen won't auto rotate when you flip it around. I'm sure you don't do that with your all in one desktop so it's probably not an issue common to both models.
The touch screen on the W500 works perfectly out of the box. In fact, the only driver I had to install to make it work was the G-Sensor driver.
Interestingly, I found another issue. In 32 bit W8, Firefox doesn't work completely correctly. When you open a menu (ie bookmarks) you can't use the touch screen to select anything in the menu. Works fine if you use a mouse. However, in 64 bit W8, Firefox works perfectly. So you're left with a choice. Proper screen rotation or correctly working Firefox. I'm sure this will get resolved with either a Firefox update or perhaps the full beta of W8.
Click to expand...
Click to collapse
Hey dude. I had a W500 for some time, but sold it, but that's not my point.
Regarding the G-sensor fix, i figured out how to fix it.
What you need to install is:
G Sensor Driver
Auto Screen Rotation Blocker
HID Monitor for acer Ring
(From http://support.acer.com/product/default.aspx?modelId=3853)
If it doesn't rotate after this, try and find the HIDmonitor.exe file on your computer, then run it and try again.
I put the file in startup to make sure it always worked. And it did
Hey guys,
I want to buy one for desktop replace. Is it good for cheap price? How's performance for browsing? Sometimes I need to open few heavy websites.
arpu26 said:
Hey guys,
I want to buy one for desktop replace. Is it good for cheap price? How's performance for browsing? Sometimes I need to open few heavy websites.
Click to expand...
Click to collapse
Depends what you use it for really..I haven't used my desktop since I bought this. Love it. Side note, my keyboard only pops up when I use the metro IE and touch a input box but not with the desktop IE. I have to press the keyboard icon on the taskbar for desktop browsing. Any one have any ideas why that'd be?
arpu26 said:
I need to open few heavy websites.
Click to expand...
Click to collapse
the-wrangler said:
Depends what you use it for really..
Click to expand...
Click to collapse
My work is testing websites. So I will plug with hdmi to my monitor. Can it handle with second monitor with extended desktop? What max resolution can it have? Also I need to have opened 3-4 heavy websites. Have it enougt power for that?
Now I'm working with very old and laggy Athlon XP 2500+ 1,8 Ghz 512 GB RAM PC.
What is program compatability on Win8?
I wish any guy could help with windows 8 pro full edition Wifi and card reader drivers not work, I tried all things here in xda windows 8 guide but doesn’t work is there any solution for this?!
or can I change the wifi adaptor to another one?
Really this device working very smooth with windows 8 but the only problem drivers issue therefore I wish some one could help:crying:
badawy85 said:
I wish any guy could help with windows 8 pro full edition Wifi and card reader drivers not work, I tried all things here in xda windows 8 guide but doesn’t work is there any solution for this?!
or can I change the wifi adaptor to another one?
Really this device working very smooth with windows 8 but the only problem drivers issue therefore I wish some one could help:crying:
Click to expand...
Click to collapse
Same deal here. Everything works except wifi and sd. which makes it kinda useless
Same problem here
Installed Win8 32bit from MSDN, and can not get the wifi working.
Tried everything posted in the Win8 guide, but do not even get Windows 8 to see the wireless adapter at all, let alone be able to install drivers,
Tried replacing the dll's, tried wififix, .... nothing
Hope someone has the solution
Hi
Take a look here: http://answers.microsoft.com/en-us/...p/f17cc8b5-9e7d-480a-aa06-777bf9687227?page=2
Well finally got my tablet that was stuck at 64 up and running. But its a pc version and there's no touch or tablet view. Volume buttons don't work ect. Is there a tablet version windows iso or a way to make this for the tablet?
You need to make sure you have all the drivers installed because there are sensors that control which way the screen is flipped depending on the orientation of the device, there is not a pc or tablet version of windows 10 its just windows 10 it works on both provided you have the drivers
i used to have CHUWI hi10 plus tablet. it runs on windows 10
I didn't think it was even possible.
I think the problem is driver. the windows 10 version on tablet or normol laptop, PC is as the same. you need to have touch driver
It is possible to Installed pc version of windows 10 on tablet. I use samsung tablet. I will try to Installed pc version of windows 10 on my samsung tablet.
Thanks & Regards,
shaan
thankss