Hi
An FAQ thread for Blade users.
Credits to StevenHarperUK
This is a guide to cover most of the common problems.
It contains some words like ROM and Build.props and RECOVERY. PM me if u can't understand anything
----------------------------------------------------------------------------
--I want to know whet generation of phone I have
[GEN1] or [GEN2]
There are now 2 Generations of the ZTE-BLADE device.Each have a different style memory
layout.[GEN1] BLADES use the baseband of 0x02A00000 and can use all of the ROMS made [GEN2]
BLADES use the baseband of 0x02600000 Trying to install a GEN1 ROM onto a GEN2 device will
brick it. GEN1 devices can be recovered and converted with a TPT
--How to find out what BLADE you have (GEN1 or GEN2)
You need to install this app Ask Mr Pigfish When you run the APP the first line will be
Mr.Pigfish says you have a Gen1 model
--How do i root my phone
ZTE Blades with Android 2.2 or lower can be rooted using z4root mod. If it doesnt work, or you have 2.3
blade there is a How to root thread in the Blade Android Development section
--How do i install a rom
-Download the Rom
-Download GoogleAps (CyanogenMod only)
-Backup your data using software like Titanium Backup
-Install clockworkmod recovery from Rom manager
-Boot into recovery (Power + volume down)
-wipe data/factory reset
-wipe cache
-install zip from sdcard option ---> select your rom
-do the same for GoogleApps
-reboot (first boot takes a while)
--The Custom ROM wont Boot Properly. Gets Stuck at the Animated/non-animated boot
screen.
This can be because of a few things You have installed a new ROM and need to clear you cache
and factory reset You installed a Theme or patch without letting the new Custom ROM boot
first The ROM you flashed was damaged when downloading - check with md4sum - re-download and
re-flash. Your SD card is in a very bad state Your SIM has a pin card (effects some of the
early 2.2)
--I want to change my partition sizes
Doing this will require a TPT. These can be made or downloaded using the App TPT helper from
the Play Store ( as of now, there is NO TPT for Chinese Blades )
--I Want to send my Phone back to the Operator - how do I make it back to stock?
The best way to do this is to run a TPT which has been made for your operator's original
ROM. A TPT that is built to do this restores the phone to exactly as it comes out of the
factory. This includes BOOT, RECOVERY and SYSTEM partitions. The DATA and CACHE are also
wiped.
--I can not get into Recovery (clockworkmod)
Make sure you are pressing (and holding) the Volume Down button (-). If you Just see some
large text of FTM then you have not installed a Custom Recovery Image yet
--Phone cannot READ/Mount SD Card
1)SD Card is Damaged
2)Card is not formatted correctly. Download - MiniTool Partition Wizard
3)Card not Seated correctly in Holder
4)The Card needs cleaning : take it out and carefully clean it with alcohol (and a
cottonbud)
--Fastboot can not Install ClockworkMod
If you get waiting for device Check USB debugging is on.On windows check drivers. On others,
check your running as root and try other USB ports/ cables. Try using ADB Wireless from the
market. If you get "writing 'recovery': FAILED (status read failed (Protocol error))
android" change the usb cable, and try another USB port.
--I want to get rid of the inbuilt apps but don't feel comfortable installing a ROM
This is possible, you gain root on the device,then use tools to remove the apps. Eg: Root Uninstaller or Titanium Backup
--Have I got TFT or OLED?
Well if you have a UK device you may have OLED If you purcashed it in 2011 you almost
certainly have TFT Both are good- but having a TFT device means that you must avoid non-TFT
compatibe ROMS (All new ROMs are TFT friendly)On some ROMS you can use the Dialer to find
out. Dial *983*24474636# in the dialer. On the Stock Orange ROM Devices that have TFT
Screens have the build Number OUK_P729BV1.0.0B08 (OLED can have this buid also - but rarely)
Devices that have OLED Screens have the build Number OUK_P729BV1.0.0B0. The build Number can
be found in - Settings | About Phone | Build Number
--How can I keep my apps and settings when I install a new ROM?
Before installing a new ROM you can use Titanium Backup to backup all apps you have
installed. After the new ROM has been installed you can restore the apps plus their data (to
keep your Angry Birds progress and scores, for example). The paid-for version of Titanium
Backup allows you backup and then restore many/all apps with the batch command to save time
reinstalling each app individually.
In general, system settings should not be restored on a new ROM. Restoring them can undo the
effect of wiping data/restoring to factory settings before you flashed the new ROM and you
run the risk of incompatible settings causing forced closure of system apps or, even worse,
random reboots of the phone. Contacts can be restored automatically (and safely) by syncing
with your gmail account(settings->accounts & sync and turn on both sync options) - you need
to do this in your old ROM so the data is in place before you install the new ROM. Many
people have reported that SMSs can be restored safely between most ROMs with Titanium
Backup, but other system settings, e.g. wireless access points, may cause problems that may
require the ROM to be reflashed. In all cases you should always use Nandroid backup in
Clockwork to save the state and settings of your previous ROM which will easily allow you to
return to a working state of your previous ROM in case things go wrong.
--How do I remove a custom theme I installed on any ROM, without factory reset?
Simply Re-flash the original ROM over the top in Clockwork. You'll get the original theme
back.
--I want to install a ROM, but remove some of the
included APPs
Simply open the ZIP file you downloaded and browse to /system/app Then remove the APPS you
don't want - be careful, you don't want to remove apps like mms.apk (SMS) and Phone.apk
--Orange SIM card will not make calls, other networks SIM cards work
The phone, as delivered by Courier is barred from OrangeUK's own network until "activated"
If you buy your phone from an Orange shop they are activated (unbarred from the Orange
network) and handed to the purchaser.
--Phone won't boot - only vibrates when I press power
When you try to turn the phone on with the power button you just feeling a quick succession
of vibrations. This means there is not enough power in the battery to boot. Make sure your
phone is plugged into the Adapter and is using the supplied USB cable.
--Wifi Keeps dropping
On 2.1 and leaked 2.2 ROMS - wifi is a real problem. There are many different work-rounds;
however now the kernel source for 2.2 is released - new ROMs don't gave it. Alternatively
there's a Blade wifi fix app available
--Phone wont turn on. It just Buzzes and red light is on back button
Try charging with another cable - your phone is out of battery
--The phone is Not connecting to 3G/ Cant get Data/ Cant send MMS, etc.
If you cannot get data over 2g/3g then your APN setting may be wrong You edit the APN's in
Setting / Wireless & Network Settings / Mobile Network settings / GSM/UMTS Options / Access
Point Names / then click the phones MENU button (hard button) then choose Add APN.
Also check your SIM is 3G
--I am trying to unlock the phone, how do I get to the enter code screen
You can only see this screen by putting in a SIM that is not the same as the ROM you have
expects So if you have a Orange TFT device that is on the standard (stock) ROM, you will
need a SIM that is not Orange (Virgin/TMobile) Once you insert a SIM that is not unlocked
you get the ENTER code screen
--The Phone Wont Read Any SIM Cards
Thickening the SIM with layers of tape (on the non useful side) has proven to work
--Cant make outgoing calls when Wifi is ON
The icon on the the top bar shows 4 reception bars gets a small x on it, the red led flashes
and outgoing calls cannot be made. Switched to airplane mode and back returns the signal -
it only ever does it when wifi is on. This is probably because you are running one
of the leaked Chinese beta kernels. Running a ROM that has a new 2.2 source
Kernel will fix this.
--What is an MD5hecksum
MD5 is a way of checking that the file you have downloaded has not been corrupted in any
way. when you run the MD5sum command against a files the response is the files
"fingerprint". If this differs from the expected MD5, then you need to re-download the file.
MD5 can be checked directly on the device by using a file manager like astro - if you look
at the details of a file an MD5 is generated Windows
Get your md5sum utility from:
http://www.md5summer.org/md5sum.zip
Extract this Zip file contents and put them into the folder you want to run the command in.
--I want to change the files in the system partition
To do this you can use ADB to modify files or Root Explorer
--I Used Factory Reset now my Phone wont boot
Custom ROM resets are best done in clockwork. However you may have problems with
Unsigned Themes. If you have a theme Installed, you may need to re-install the Original ROM
over the top to get it to boot.
--I want to change how my phone's screen looks like / Theme my phone
In any ROM you can change your background(click the MENU hard button when in the home
screen). However some custom ROMs have themes
made for them. There is a whole section on themes and Apps for the ZTE Blade - However the
most themes are specifically matched to a single or a few ROM's. Some themes are simply
applied to launchers that support them - i.e. launcher pro.
Other need to be installed via Clockwork just like a normal ROM - for these you should
always boot the ROM before applying the theme. Also you should always do a clockwork
(nandroid) backup before applying a theme.
--I dont like the keyboard I have
Keyboards on Android can be swapped. To change a keyboard - Activate it in Settings >
Language and Keboard Then in ANY app do a long hold in any text areas wich wold normall show
the keybaord - then choose Input Method
--Bluetooth file Transfer doesn't work properly
Plain vanilla Android has seemingly limited general file transfer capabilities. You can
download market APPS that are far superior. Bluetooth File Transfer (free) Astro File
Manager (free) add the Astro Bluetooth module (free)
--I want to use A2SD but what do I do
Firstly you need a ROM that supports A2SD, next you need to know if it support EXT2/3/4. Now
you need to change the way your SDCard is Partitioned. In Ubuntu use GParted - in Windows
get the home version of partition wizard. Now Copy EVERYTHING off the SD Card. Make the
FIRST partition the FAT32 one (primary partition) - leave 512MB or more for the EXT2/3/4
(where apps will be installed) Now Make Another partition (must be the SECOND) as EXT2/3/4 -
also make this primary. Now mount the Card and copy all your data back to the FAT32 Part -
assuming it fits. When you install/next boot you ROM, the EXT2/3/4 partition will be mounted
as DATA / this is where your apps go from now on.
--I have bought a bigger SD Card and want to swap it into my Phone
If your just using FAT32 (no app2sd) this will be easy. Right Simple - mount the current one
over USB on your Computer (you can do this in Android - or in Clockwork) Copy everything off
onto your computer. Unmount and Swap new card into phone. Remount over USB. Copy everything
back on
--I am upgrading my ROM and don't want to lose my contacts
If you sync your contacts via Google (gmail account), then the contact will be re-
downloaded when you re-enter your Google Account after flashing. You can see your accounts
in Menu > Settings > Account & Sync Otherwise you can go into the Contacts App and choose
Menu > Import Export. The Export will made a new large file with all your contacts in. This
will be written to the root of your SD Card. Import will scan your SD Card and look for any
files that are contact backups.
--I set a BAD SSID in the Wifi Hotspot - now I cannot start Tethering
If you set a SSID on your hotspot to be too long (over 32 characters) or with non valid
characters - then you make it impossible to start the Hotspot. You MUST use ADB to edit the
hotspot name manually
: adb -d shell
: sqlite3 /data/data/com.android.provid
If sqlite3 is not installed on your ROM you can download titanium backup from the market
then use the alternate command
:adb -d shell
:/data/data/com.keramidas.TitaniumBack
--I want to import all my contacts into Gmail - so they can sync with my phone
Google dont tell you anywhere what the Magic format is of their CSV. Copy the first line
from below, then simply add all the contacts you need into the format of the
2nd line Most Spreadsheet programs will let you open the CSV and edit it. Then just import
the file into Google Contacts (selecting a group when you do it) - I suggest a new group.
--How do i get ICS on my phone
There is no official ics for the blade, however, There are several ics roms to choose from. However there is no perfect release and all of them have certain bugs and issues.
--Can I boot more than one rom on a ZTE Blade
Thanks to [email protected], Snap.IT and Jinxxed, this is now possible. Head over to the Blade Android Development subforum to see the threas
September 21st : ZTE BLADE DAY
Guys feel free to reply with corrections and suggestions so that I can add then to the OP
Thanks to yash_p90 and karthiknr for assistance
good job is helpfull
Nice.
Good job. You should probably do some formatting. I can help you with that if you want!
Please note that there is no method available to change the partition size on the Chinese Blades. Thus the TPT method won't work. You must mention this in your question "I have changed my partition sizes to have a 128MB system, I want to change it back"
/Sticked. I hope this and the Faq thread I stickied yesterday will offer easy accessible information and resources to the ZTE Blade users. I hope you guys appreciate QuantumFoam and karthiknr effort.
Quantum add the question "Is multiboot possible on Blade?"
The answer should be there in that old multiboot thread.. Wbaw answered I suppose..
Sent from my LT26i using xda premium
karthiknr said:
Quantum add the question "Is multiboot possible on Blade?"
The answer should be there in that old multiboot thread.. Wbaw answered I suppose..
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
K.....ill add it.
Added multiboot question on karthiknrs suggestion
I think you should add in how instal custom rom an how keep safe personal data the nandroid backup ( via the recovery), its better than titanium backup and very easy, otherwise its very good :thumbup:
Envoyé depuis mon Blade
Gokh said:
I think you should add in how instal custom rom an how keep safe personal data the nandroid backup ( via the recovery), its better than titanium backup and very easy, otherwise its very good :thumbup:
Envoyé depuis mon Blade
Click to expand...
Click to collapse
Thanks.
I'll add it
total internal memory issue
i got two dell xcd35 (zte blade) phones.... one of them is gen1 and other is gen 2... i installed rom manager and then installed cynogen mod 7 on the gen 2 device and i got 160MB total internal memory... for the second phone i firstly converted gen 1 to gen 2 and then installed cynogenmod 7 and i got 294 MB as total internal memory! please help me out to get 294MB as total internal memory on the other device too
I already replied to ur thread in the General Forum
very helpful,
thanks ∩__∩
I've a ZTE V889D bought from China. Is this Blade version? When I run Mr Pigfish, it says unknown model. It has similar spec:
http://www.zte.com.cn/cndata/mobile/mobileinfo/201203/t20120329_298335.html
No, that's not a blade. It uses MSM7227A as CPU, that is an ARMv7 (blade uses MSM7227 that is ARMv6). Blade in China is called V880 and that version has only 256mb RAM ( http://www.dealextreme.com/p/zte-v8...dma-3g-single-sim-w-wifi-white-101744?item=24 )
Your phone should be the ZTE Skate Acqua: http://pdadb.net/index.php?m=specs&id=3403&c=zte_skate_acqua or something very close to it (looks like that V889D has dual sim support, but official Skate Acqua shouldn't have it).
CTRL+ALT+DEL said:
No, that's not a blade. It uses MSM7227A as CPU, that is an ARMv7 (blade uses MSM7227 that is ARMv6). Blade in China is called V880 and that version has only 256mb RAM ( http://www.dealextreme.com/p/zte-v8...dma-3g-single-sim-w-wifi-white-101744?item=24 )
Your phone should be the ZTE Skate Acqua: http://pdadb.net/index.php?m=specs&id=3403&c=zte_skate_acqua or something very close to it (looks like that V889D has dual sim support, but official Skate Acqua shouldn't have it).
Click to expand...
Click to collapse
Is there forum ZTE Skate Acqua or a custom firmware?
Thanks Quantum !
Few things were total new. Like bluetooth file transfer capability, I thought it's only Blade that is having limited bluetooth profile.
Also can you add a question about swap. I know only poor (256MB RAM) fellows like myself are going to benefit. No issues for me for one plus week of usage without a reboot.
Sent from my Idea Blade
rahulsa said:
Thanks Quantum !
Few things were total new. Like bluetooth file transfer capability, I thought it's only Blade that is having limited bluetooth profile.
Also can you add a question about swap. I know only poor (256MB RAM) fellows like myself are going to benefit. No issues for me for one plus week of usage without a reboot.
Sent from my Idea Blade
Click to expand...
Click to collapse
Your welcome.
I'll add swap, though I can tell you that's only if you use your phone for HD gaming
Quantum! Looks like you'll have to edit the MultiBoot part in the first post.. Was going through modaco just now.. [email protected] just made it work.. Hell Yeah!!xD
Sent from my LT26i using xda premium
karthiknr said:
Quantum! Looks like you'll have to edit the MultiBoot part in the first post.. Was going through modaco just now.. [email protected] just made it work.. Hell Yeah!!xD
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Yeah I pmed you about it. That guy is a genius if he manages to pull it off
Related
Hello,
I have been trying to root my friends HTC Magic following instructions I have found on this and other forums and having no luck.
The phone in question is a vodafone htc magic.
My problem is that the computer does'nt recognise the phone as the drivers don't seem to work for it!
Could somebody please post a step by step guide for Noobs so I can see where I am going wrong!
I rooted my Hero no problems, but the Magic is proving a bit more of a challange!!!!!!
Many thanks,
Iain
You could do what I did which I've summarised below. There's probably more backup steps than is necessary, but you can never be too careful.
There's loads of guides out there with the guides and detail, e.g. http://forum.xda-developers.com/showthread.php?t=519523
but they seem to branch in and out of methods quite a bit. I've added a few links to the pages I used for the detail.
The method I used is the 1 click backdoor, which also disables OTA updates to stop it being closed in the future I think.
First off, I'm a Linux noob and managed okay because the apps are so well thought out, but this is all done at your own risk.
Secondly, your uk Magic Vodafone prob has 32b board, not 32a.
(There's plenty on this forum. Or the Cyanogen one on the Dream forum works for 32b too.)
You can check with extra step by powering off, then on power again while holding back button. Last digits at top tell you the board details. Menu button gets you back.
0) Install the Android USB driver, connect, mount, then disconnect, etc.
http://dl.google.com/android/android_usb_windows.zip
1) Use google to sync all your contacts, etc. to google account so restore is automatic.
2) Use Astro to Backup your apps etc to the sd card
3) Goto wireless settings, mobile networks, apn, select and make note of your vodafone UK APN details (so you can type your 3g settings back)
4) Use USB to copy your SD card to your PC
5) From your phone, Download Cyanogen recovery. Don't run yet.
http://www.ryebrye.com/blog/2009/08/16/android-rooting-in-1-click-in-progress/
( This basically automates the rooting and booting to this recovery image : http://forum.xda-developers.com/showthread.php?t=523558 )
6) From your phone, Download a rom image; the 32b board you prob have in your UK Magic allows you to use 32b ones, I used the Cyanogen one here.
http://forum.xda-developers.com/showthread.php?t=537204
7) Use Astro to move the rom file from \sdcard\download to root of \sdcard
8) Run Cyanogen recovery 1.4 1-click root installed in 5.
Use Backup recovery image
Use Flash recovery
9) Poweroff, home + power to get into the custom recovery image
10) Select Nandroid backup to create new backup (this copies your phone to your SD card)
11) Reboot. Repeat 3 to get the backup of the nandroid folder, and the recovery image created in 7 and 9 onto your PC
12) Run Cyanogen recovery 1.4 1-click root installed in 5 again.
Flash recovery (this makes next boot 'special')
13) Reboot. Poweroff, hold home + power on again.
14) Select WIPE (You did backup your apps and SD card data right?).
15) Then select apply any zip from sd.
Follow instructions to install the Cyanogen rom image you moved to the root of your SD Card in 6 and 7
16) Wait 10 mins or so. The last message about writing root or whatever doesn't explicitly say finished.
17) Reboot.
If you have reboot hang, most people report is because missed WIPE step. Otherwise consult the relevant forum for the Rom you downloaded.
18) Do the new user settings thing. The activation and sync will fail cos you've not got 3G yet.
19) Goto network settings, advanced, APN, type in your vodafone UK APN details (so you can type your 3g settings back)
20) Done
21) If you've got Cyanogen Install the updater from marketplace (search for Cyanogen), or here...
http://forum.xda-developers.com/showthread.php?t=544663
I also installed:
Audio resources unzipped to your SD Card root from the Cyanogen rom pages, this reinstates notifications and ringtones I guess were removed to allow the memory obsessives to keep their phones clean.
SetCPU from this site, to override the default Cyanogen high overclock settings when phone is sleeping.
Cheers
Chris
Hi Chris,
Thanks alot for that, my friend is coming over after the F1 so will give it a go and let you know how we get on!!!!!
Thanks alot for your help!
iain
Hi!
Did you solved the problem, I seem to have the very same problem as you
trying to get cyanogen on my uk htc magic
Hi,
I have been trying to get cyanogen on my vodafone uk htc magic for a few hours now, not even getting close though!
The problem is, i already have the proper 1.6 update which vodafone pushed out a couple weeks back, and now want to root my phone and get cyanogens 1.6 on it. The flashrec application only runs on early versions of cupcake i believe, so my first step was to get that on my phone. (I have been following this: http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod aswell as trying the guide on this forum thread)
When i quickboot the phone and try to install the 1.5 update, it goes all the way through with the progress bar in the top right, then fails right at the end on 'Model ID Incorrect! Update Fail!'. When i reboot the phone it is just as it was before.
I have also tried putting the cm-recovery-1.4.img file on the memory card and installing that from flashboot but that also fails.
Do you have any ideas / recommendations for getting cyanogen on there?
Thanks,
Aaron
[email protected]
Skype: atrout1991
aaron465 said:
Hi,
I have been trying to get cyanogen on my vodafone uk htc magic for a few hours now, not even getting close though!
The problem is, i already have the proper 1.6 update which vodafone pushed out a couple weeks back, and now want to root my phone and get cyanogens 1.6 on it. The flashrec application only runs on early versions of cupcake i believe, so my first step was to get that on my phone. (I have been following this: http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod aswell as trying the guide on this forum thread)
When i quickboot the phone and try to install the 1.5 update, it goes all the way through with the progress bar in the top right, then fails right at the end on 'Model ID Incorrect! Update Fail!'. When i reboot the phone it is just as it was before.
I have also tried putting the cm-recovery-1.4.img file on the memory card and installing that from flashboot but that also fails.
Do you have any ideas / recommendations for getting cyanogen on there?
Thanks,
Aaron
[email protected]
Skype: atrout1991
Click to expand...
Click to collapse
Is there a solution for this?
I did get this working in the end, was quite a while ago now though...
I am pretty sure that I used the relentless rooter program to get it working in the end, details/download are here:
http://forum.xda-developers.com/showthread.php?t=556200
Aaron
The Motorola Flipout is fairly easy to root, at least now. Universal Androot (get it here) works.
I am thinking about moving apps to the sd card. However, since I haven't reflashed the phone, and I don't have a ROM for it, I'd like to do it without reflashing. Is that possible?
If I partition an SD card correctly (ext3), copy all of /data onto that partition, and then mount that partition over /data, will that work? Or do I have to mount the card before the phone boots?
Or is it better to just copy /data/data, and mount the partition over /data/data?
It seems to me that mounting over a directory, as opposed to creating a link is least invasive, because on reboot the phone is as it was before. Is this right?
If I have to mount the sdcard before the phone boots, can I just edit one of the init scripts, or is that more complicated? I read about editing init.rc and repacking boot.img
Oh, HOWTO unpack edit and repack boot images seems to give good instructions. On the Flipout, boot is mtd4, and recovery is mtd5.
If I only modify boot, I can't brick my phone too badly? Since I haven't changed recovery, I should be able to recover (?). Can I create an update.zip that flashes the old boot.img and undoes my changes in case something goes wrong?
I just got the flipout from rogers.. Is there anyplace that has a development forum for it? And does it have the efuse ? If it does, is it possible to do what was done with the droid X to it?
How did go so far ghostwheel? I'm eager to hear what else you have figured out.
You use App2Card.apk at below for app2sd without flash:
http://www.tinhte.vn/f280/app2card-2-4-4-20-9-cai-dat-ung-dung-len-nho-phan-vung-456586/
Requires: just a rooted phone
Steps:
- install app
- click Menu / Partition button then use slide bars to create ext2 for your sd card if it hasn't been splited yet
- click Install App2card button
- phone will be rebooted and you just taste app on sd after then
Note: above page has further instruction but it is vietnamese, you must use google translate to get it. This app runs perfectly on my Milestone.
Sent from my Milestone using XDA App
ghostwheel said:
The Motorola Flipout is fairly easy to root, at least now. Universal Androot (get it here) works.
I am thinking about moving apps to the sd card. However, since I haven't reflashed the phone, and I don't have a ROM for it, I'd like to do it without reflashing. Is that possible?
If I partition an SD card correctly (ext3), copy all of /data onto that partition, and then mount that partition over /data, will that work? Or do I have to mount the card before the phone boots?
Or is it better to just copy /data/data, and mount the partition over /data/data?
It seems to me that mounting over a directory, as opposed to creating a link is least invasive, because on reboot the phone is as it was before. Is this right?
If I have to mount the sdcard before the phone boots, can I just edit one of the init scripts, or is that more complicated? I read about editing init.rc and repacking boot.img
Oh, HOWTO unpack edit and repack boot images seems to give good instructions. On the Flipout, boot is mtd4, and recovery is mtd5.
If I only modify boot, I can't brick my phone too badly? Since I haven't changed recovery, I should be able to recover (?). Can I create an update.zip that flashes the old boot.img and undoes my changes in case something goes wrong?
Click to expand...
Click to collapse
Hi,
I'd really like to help with that (I'm a confirm dev. for Cliq and CliqXT phones).
Hopefully we can do great things like we did for Cliq and CLiqXT (upgrade to 2.1!). (check my work at http://bit.ly/adlxmod).
First thing would be to generate a system dump (a dump of all the files in the /system partition). Hopefully we then could generate a custom recovery to flash on the phone, and then custom roms, either base on the dump you provide or other roms from other files. Contact me on twitter @adumont (say it's for Flipout) and I'll guide you to generate the dump!
Looking forward to do great things for that litle phone!
I'm in touch with adlxdum to give him my dump but I think we should start a separated thread like "Custom rom, modding (work in progress)" so that we can follow adlxdum work.
And...thx in advance ;-)
flusshd said:
You use App2Card.apk at below for app2sd without flash:
http://www.tinhte.vn/f280/app2card-2-4-4-20-9-cai-dat-ung-dung-len-nho-phan-vung-456586/
Requires: just a rooted phone
Steps:
- install app
- click Menu / Partition button then use slide bars to create ext2 for your sd card if it hasn't been splited yet
- click Install App2card button
- phone will be rebooted and you just taste app on sd after then
Note: above page has further instruction but it is vietnamese, you must use google translate to get it. This app runs perfectly on my Milestone.
Sent from my Milestone using XDA App
Click to expand...
Click to collapse
Worked!
I couldn't repartition the SD card with the program, so I had to partition it myself. But once that was done, thing seem to work well. A bit slower...
I'm not totally sure how to use the app. Internal seems to still be full, but ext2 on the SD is quite empty. I can't seem to be able to tell if an app is installed to internal or external.
I have to try and install some more apps to see if I run out of memory.
Thanks!!
I'm guessing the flipout and charm are almost identical phones?
My wife has a charm and i'm one of those "i'm not a developer, but I'd like to help" guys.
MrShides said:
I'm guessing the flipout and charm are almost identical phones?
My wife has a charm and i'm one of those "i'm not a developer, but I'd like to help" guys.
Click to expand...
Click to collapse
Yes, I think they are very similar.
One thing that I'm interested in is the accelerometer. On the Flipout, most apps that use it are twisted - for example wikitude, and many games (labyrinth lite works!) I wonder if things work on the charm...
the charm has the same issue.
MrShides said:
the charm has the same issue.
Click to expand...
Click to collapse
thanks! Too bad....
Hi ghostwheel
I've tried installing app2card, but I'm having some problems. I got the new version 2.7.2.
As you said, the partition doesnt work. For me it says sd card is full but its empty...
How did you manually partition it?
I've found some tutorials but it was for other phones and they required a custom rom...
I partitioned the card using a linux computer, with the program fdisk.
I allocated 2GB to a partition of type ext2. But, I think there are many alternatives for partitioning a disk, see this page:
http://androidcommunity.com/forums/f9/how-to-create-ext2-partition-14232/
Wow great link! Many different options! Will try this as soon as I get a micro sd card adapter. Thanks!
You mentioned in your old post that you were having problems using app2card, That you weren't sure if it was working. Have you been able to use it since? Is it working well? and if not have you found an alternative?
I just started using this phone and I'm almost running out of memory... this is quite annoying!
longlife_01 said:
You mentioned in your old post that you were having problems using app2card, That you weren't sure if it was working. Have you been able to use it since? Is it working well? and if not have you found an alternative?
!
Click to expand...
Click to collapse
Yes, I was having problems. Mainly when restarting the phone, sometimes oodles of apps don't work, including launcher pro, and app2card. You have to remember that when the phone reboots and seems to have FC problems, don't chose any home screen as the default, in case it crashes, and keep a spare app2card to reinstall on the sdcard. I think "severe" problems I had only twice, or so.
So, I have almost no problems. Most of the time it works really well. So well, in fact, that I'm a bit afraid to upgrade it, in case something breaks. And, I totally forgot what it is like to have to delete apps to install another one.
I have more of the opposite problem - finding an app among all those installed takes a realllly long time if you forgot its name. Apps organizer helps.
hello, i am new and i have flipout to test in poland orange network, i just root him using 1st post in this forum, great job! thanks
OK, I am having some problems with the current version of app2card. As I said, sometimes when I turn the device off and back on, app2card fails, and many apps give a FC which starting. Then one needs to fix the apps from app2card. It seems that once that is done, some apps lose some of their data. So, for example, droidwall (excellent program!!), lost all firewall data. I'll have to check if newer versions of app2card don't have this problem. It doesn't happen very often.
Instructions to root Flipout
Hi - I'd consider myself a newbie regarding rooting. I just got the AT&T Flipout - I really like the form factor. I just tried running the Universal Androot from my phone but got the security warning message about only being able to install from trusted sources.
Can someone point me in the right direction please?
Many thanks!
it says that with a lot of apps installed like that, including gmote that I downloaded from the developers site. Just look at what you're downloading like you would on any machine
go to settings > Application and tick on unknown sources to be able to install it.
Guide(/essay) removed as I don't have this phone anymore, so can't update or change the guide with accurate information, which I haven't tested on my own device first Thanks for all the help from others.
..
..
Restoring tpt functionality
..
These are good explanations, very thorough.
I've picked up on a few things that could be added/edited.
1.) Gen 2 is a newer version of the radio firmware, as well as the different memory map
2.) Add Amon Ra Recovery as an alternative to CWM, I know it's not very popular but I find it good for partitioning.
3.) Add link to Mr Pigfish, https://market.android.com/details?id=com.apedroid.pigfish&feature=search_result
4.) On the Flashing ROM's section, I'd also add 'Go into Mounts and Storage and Select Format System'. Not needed, but recommended for the cleanest installation and hopefully fewer problems down the line.
5.) There's the CM7 Converter thing for people to use CM7 on a Gen 1 phone. It can be flashed via recovery.
6.) Add TPT link for Ginger Stir Fry (Over on MoDaCo) since it's popular.
7.) Remove or clarify 'Gen does not matter' under the TPT section, a few may take this that Gen 1 ROM's can be flashed on a Gen 2 device :/
8.) Put warnings/important things in big scary red writing.
9.) Bold and underline the headings e.g. Gen 1/Gen 2, TPT, Root etc.
10.) Personally, I'd say that the Firmware is more similar to the BIOS than Recovery. Recovery is probably most similar to Windows Recovery Environment.
I'm glad you explained what recovery is since it's a bit annoying when people don't know and don't bother to Google it, hopefully they'll read this and understand. I hope you find my comments constructive.
Partitioning your SD Card.
Why?
To create an EXT Partition for A2SD (Not to be confused with the Froyo Apps2SD).
Why do I want this?
For more space on the phone's internal memory and to allow certain apps like widget's to reside on 'internal' memory which may not be available if they were on the FAT32 Partition used by the Froyo Apps2SD method.
How do I do this?
There are a few ways to do this, I found this method the best. I'd recommend doing this before flashing a ROM with a full wipe to avoid issues.
1.) Create a full Backup in Recovery in case something goes wrong
2.) Mount the SD Card on Windows/Linux/Mac
3.) Copy the contents of the SD card into a folder on Windows/Linux/Mac
4.) Download Amon Ra Recovery - Gen 1 Gen 2 Ensure you download and verify you download the correct version. Flashing the wrong version i.e. Gen 1 on a Gen 2 will cause a lot of problems.
5.) Flash it with your existing recovery e.g. Clockworkmod
6.) Go back to Advanced > Reboot Recovery
7.) Scroll down to Partition SD Card
8.) Select Partition SD
9.) Swap Size 0 MB EXT Partition Size 512 MB/1024 MB - depends on the size of your SD card and the number of apps you have.
10.) Press Home to Confirm. ALL Data on your SD will be erased.
11.) Press back and select EXT2 to EXT3 for the best compatibility with A2SD scripts.
12.) Select USB-MS toggle
13.) Drag and drop the ROM you want to flash on your SD
14.) Disable USB-MS toggle.
15.) Flash .zip from SD Card.
16.) If you intend to use CM7 download S2E from the Market to enable A2SD. Tick the first two boxes in the app. Alternatively, if you want to ensure you have enough space for when the Google Backup & Restore happens I've uploaded the APK of S2E to install BEFORE you flash Gapps.
Enjoy.
BTW are you going to post the guide that you wrote in the first post on MoDaCo? It'll get more views there and subsequently be of more use.
If you have any further questions you can find me on MoDaCo with the same username, I'll do my best to help. I'm not a developer either for that matter.
Hello, hedgepigdaniel from modaco here.
Nice guide, I have a couple of suggestions/comments
I don't know if you are aware, but Gen2 blades do have TPT, they just use a different file format (image.bin rather than the .img and .mbn files). There are not as many custom layourts and such around, but I have just put one up for the purposes of unbricking. For that reason, I don't think its a good idea to recommend flashing via windows as protection from a brick anymore (especially because windows flashing goes horribly wrong every so often).
In the rooting section, why don't you link to kalt kaffes modified z4root instead - since it can root Gen2 blades aswell. For Gen2 blades, ROM manager from market is the the easiest way to install recovery.
I've written an unbricking guide in the last few days (that's where the Gen2 TPT is). You are welcome to make use of that if you like.
Glad I finally got enough posts to post in the development section...
..
TPT is not able to change the lowest level firmware file - partition.mbn. If you try to flash a TPT with a different partition.mbn then it just wont flash. You need windows to change the entire firmware. What wbaw has done (and I just repackaged his work as "custom") is create a mixture of files from Gen1 and Gen2, partition.mbn and the few files that have to match from Gen1, and the rest from Gen2. This makes it possible to TPT a Gen1 phone to a mixture that for all intents and purposes is Gen2. wbaw's TPTs can't be flashed to a real Gen2 phone because they have a Gen1 partition.mbn, but It would be equally possible for someone to make the opposite of what wbaw has made - a image.bin TPT with a Gen2 partition.mbn and co and Gen1 everything else (or just with a different partition layout), but no one has yet done so (and I haven't taken the time to work out how). So right now windows is the only way to go back to Gen1 from Gen2, but it doesn't have to be. More to the point, it isn't the only way to re-flash real Gen2 firmware, because I've now put a Gen2 image.bin in my unbricking guide. That's why I wouldn't recommend that people flash anything via windows with the aim of avoiding a brick.
You can use this tool by fonix232 to convert between multi-image TPTs and image.bin TPTs. If you start out with the multi image files from stock Gen2 firmware then you can create a image.bin that will flash on stock Gen2 phones as I have done.
EDIT: jsut to clarify, It's still fine to flash via windows as per my guide if you want to be able to flash all the TPTs that are out there on forums now, or to repartition or enable fastboot, its just not necessary as a safety measure.
Not sure if this is the best idea for 'n00bs' but there's an excellent partition tool for custom partitions.
http://android.modaco.com/topic/337...ol-windows-only/page__p__1672185#entry1672185
By Ricardopvz
It works with the Windows Flasher and the TPT's.
Instructions for use:
1.) Open the program
2.) Drag the sliders or enter values for the partition layout you want
3.) Press Create files
4.) Open the TPT .zip
5.) Navigate to the directory with "partition_zte.mbn" and "appsboot.mbn"
6.) Replace the existing "partition_zte.mbn" and "appsboot.mbn" with the new ones.
Done.
Also, add How to flash the Gapps package/Where's my Market gone and difference between Stable, Nightlies etc. under the CM section since some people can't be bothered to Google it.
1.) Place the gapps file that you downloaded on the root of your SD Card
2.) Reboot into recovery
3.) Select Flash .zip from SD Card
4.) Confirm
5.) Reboot
6.) Done
What's the difference between Stable, Nightlies, Experimental and Alpha?
Stable versions are those where all known issues have been addressed and resolved. This version is for everyday use.
Test / RC versions are similar to the experimental versions, but are in the final stages of testing before being "stable". There may be a few bugs left, but this version is usually stable enough for everyday use.
Experimental / Alpha versions are those where new features are being added, modified, and tweaked, and there are known bugs that are being worked on. This version is for beta / alpha testers.
Nightly builds are daily compiled builds from source. This version therefore has the latest bleeding edge features & tweaks, but it is also the mostly likely to have bugs and issues.
Click to expand...
Click to collapse
CyanogenMod Tips/Solutions, some from the CyanogenMod Wiki here.
It's slow!
Remove stock launcher "ADW". It slows down the homescreen badly.
Recommended: "Launcher Pro" or "Gingerbread Launcher" from Market.
Omg I flashed CM7 and now I don't have Market!
You need to install the Gapps zip. Sign into your account on the First Time Setup screen and Market will activate
My Wi-Fi doesn't turn off/it's draining my battery!
The workaround for Wi-Fi sleep policy that doesn't seem work is download Green Power from the Market if you want your Wi-Fi off when your screen turns off.
Help, Nightly 1xx doesn't work properly/There's a bug!
They're nightlies, sometimes they don't work properly. Use the recommended Nightly from the Wiki Page or another ROM. Also, refer to the CM7 thread on MoDaCo linked below for possible fixes/workarounds.
I don't know what nightly to choose!
First check the CyanogenMod Wiki listed above the CM7 thread on MoDaCo here.
Read the last five pages on that thread for up to date info and feedback on the latest nightlies.
If you still don't know then post in the CM7 thread. Don't create an entire new thread to ask that question please.
Hi im trying to root my friend's blade. I cant find the file to root. Could you be kind to show the link please?
Guide to Rooting:
Enable USB Debugging:
Settings-->Applications-->Development-->USB Debugging (tick)
Install this Apk:
Install Astro File Browser from the market. https://market.android.com/details?id=com.metago.astro
Download the file on your computer, then copy it across to somewhere on your phone
Browse to that somewhere and click on the file. Open app manager and click install.
After installation, click open.
Tell it to do Permanent Root
Wait for it to reboot
Done.
Sent from my X10i using XDA App
teddymild said:
Hi im trying to root my friend's blade. I cant find the file to root. Could you be kind to show the link please?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I'd suggest you use the TPT method here since the process would be quicker than rooting it manually etc.: http://android.modaco.com/topic/337798-gen1-to-gen2-tpt-upgrade/
This will root the phone, install Clockworkmod recovery and put on a new 2.3 ROM as well. I'd suggest you use the Ginger Stir Fry one on that page.
I think z4root would work as well if you don't want to carry out the TPT method.
How's the guide going?
Thank you. I'll try it.
k0zmic said:
I'd suggest you use the TPT method here since the process would be quicker than rooting it manually etc.: http://android.modaco.com/topic/337798-gen1-to-gen2-tpt-upgrade/
This will root the phone, install Clockworkmod recovery and put on a new 2.3 ROM as well. I'd suggest you use the Ginger Stir Fry one on that page.
I think z4root would work as well if you don't want to carry out the TPT method.
Click to expand...
Click to collapse
Sent from my X10i using XDA App
This thread dead?
..
It would be nice to take this thread further.
Hello,
I just bought a Red Lens (Tested with Catlog method suggested in the Beginner Guide) Defy while i was at China.
I find there are a lot of Stuff ( Application & icons named in Chinese characters) on my phone that I do not want/can't use. (and can't uninstall)
So i would like some instructions or a link to, that would help me 'format' my phone to:
1.not only upgrade it from it's existing 2.2.1 version to a potentially less power consuming & better performing OS version
2. And also clearing out and keeping only the necessary applications of the phone.
I hope i kept the question easy to understand my situation.
Thanks.
after you root the phone you should be able to uninstall some aps you can't uninstall otherwise.
but if you go to the trouble of rooting your phone than you should try CM7 (with go launcher ex):
I didn't quite understand what you meant by '(with go launcher ex)'.
No.3 on the Instructions in 'Connect your phone to PC'. Do we disconnect it at any stage within the process?
No. 8 of the Instructions, asks to 'copy the Gapps zip and cm7 stable or nightly zip file to root of your SD card'. Does this mean copy these files to just inside my Micro-SD card and not into any other folder.?
The Gapps zip file is from the //goo-inside me/ gapps/ site? I found many files there, which one do i need?
No. 12. 'select the appropriate baseband to achieve optimal reception'. I assume the appropriate baseband should be my current base band. How do i find out which it is?
The backup mentioned after the instructions is a backup of the newly installed OS? Is it necessary/Advisable to backup my current OS and at which stage is it necessary?
Thanks
with go launcher ex i was referring to install it from the market after you finish. (it works way better than CM7s' ADW)
nr3 no, you don't need to disconnect. that's how it was written by stewi21 (after his tutorial I installed CM7 also)
nr8 it's just so that you can find it more easily. you navigate a little slower using the volume keys.
nr12 applies if you don't have signal after install. you'll see by region if it's the case in baseband switcher...I didn't have to go through this stage. if you can't find it try them all until you'll have signal...
the backup is from nr10 you can skip it if you want..
also it may stuck at the boot animation...you should leave it about 2-5 minutes and if it's still stuck just take out the battery and plug it back in
Aight ill try it then.
Much appreciated
No.8. The Gapps zip file. Which one is it that i need?
The one for CM7.
edit:
here's a link
I believe you can actually delete apps without rooting your phone with titanium backup.. However, i suggest rooting and flashing cm7, its much faster!
Here's a simple noob-proof TPT Guide for repartioning/upgrading your ZTE Blade/Orange San Francisco in order to run Android 4.0 (ColdfusionX or AOKP)
I'm assuming that you're running on a rooted system, if not, check the forum to know how to root your rom.
Step A - DownloadDownload TPT Helper from Google Play. You can find it HERE or open the Play Store on your device and search for TPT Helper.
Grab your rom
CFX: http://www.modaco.co...m-updated-1505/
AOKP: http://www.modaco.co...9-remix-rc-652/
MIUI: http://www.modaco.co...m-updated-3003/
KonstaKANG: http://www.modaco.com/topic/355059-romgen2276-cyanogenmod-9-konstakang-android-404/
and Google Apps
FULL: http://goo.im/gapps/...0429-signed.zip
Medium: http://www.mediafire.com/?lgq5h4r12ca7n52
Mini: http://blade.windows98.co.uk/ (scroll down).
The main difference between the two packages is that FULL doesn't have Google Talk (but you can install it later copying Talk.apk to /system) ).
Put both ZIPs on your SD Card WITHOUT UNPACKING THEM.
If you plan to use KonstaKANG, download Konstat's custom TPT ( GEN1 PHONE - GEN2 PHONE Download GEN2 version ONLY IF YOUR PHONE WAS SOLD WITH GEN2. If you upgraded it with some old TPTs, you still have to use GEN1 ), extract it to the root of your SD Card and proceed to step D.
Step B - Set up TPT HelperPress Accept at the first warning
If your phone type is detected correctly, press yes (otherwise, press no, but it shouldn't fail)
If your phone region is detected correctly, press yes (otherwise, press no, but it shouldn't fail)
Choose your GEN version.
WARNING: If your phone was upgraded with TPTs or Windows, choose Other. You should choose GEN2 only if your phone has been SOLD with GEN2, not upgraded.
If you noticed you made a mistake, press the MENU key, Other -> Options and fix your errors.
Step C - Create your TPTPress Create your TPT.
Choose your splash image
Choose your CWM version (I suggest CWM 5.0.2.0)
Enter the Cache size (20MB is suggested, but if you plan to use CFX you can lower it, since it's only needed to store temp files from Play Store (and CFX has a redirect to /data for them)), then press OK.
Enter System size (180MB is the minimum size if you remove Bootanimation and use Mini Gapps, for a full experience choose a 200MB layout (I use a 196mb, CFX + MiniGAPPS and everything is working)), then press OK.
Warning: If you'll use KonstaKANG, /system partition's size can be trimmed down to 138mb without any issues.
Data partition size will be self calculated (should be around 235MB). Press Yes if you like this layout, No to change sizes.
TPT Helper will download some files and make the TPT. Simply wait untill it has finished.
Step D - Flash the TPTWhen TPT Helper has finished to download, shut down your phone and remove the battery for 30 secs. Then insert the battery, keep pressed VOL+ and Menu keys, then press the power button. Some green text should appear on your screen. In about 1 minute the TPT process should be over and your phone will reboot to CWM.
Step E - Flash your ROMIn CWM choose:
- Mounts and Storage -> Format /system
- Wipe Data/Factory Reset
- Wipe Cache
- Advanced -> Wipe Dalvik Cache
- Install Zip from SD Card -> Choose Zip from SD Card -> Choose your ROM zip file
- Wipe AGAIN Data/Factory Reset
- Reboot System Now
Then reboot and wait for some minutes, untill the rom full boots and let it sit on the launcher for ~ 5 minutes then reboot into recovery again (Power button, Reboot, Recovery)
Now choose:
- Install Zip from SD Card -> Choose Zip from SD Card -> Choose your GAPPS zip file
- Reboot System Now
Step F - Extra (Suggested only to Advanced Users)If /data is too small, you can both:
- Flash S2EXT from CWM - http://www.modaco.co...coldfusion-ics/
- Install Link2SD from Google Play - https://play.google....om.buak.Link2SD
I prefer the second option, since it has more functionality, like moving system app's upgrade to /system, use internal App2SD script for application that has A2SD support etc. In order to use those scripts you need to repartition your SD Card through CWM (Reboot to CWM, )
If you need Google Talk, simple download full GAPPS, extract Talk.apk from that package and copy it to your SD Card. Then with a Root-enabled file explorer, copy to /system. Here are 2 File Explorer with Root permissions that you can use:
Root Explorer: https://play.google....re.rootexplorer
Solid Explorer Beta: https://play.google.....solid.explorer
I made this guide some weeks ago in order to help people at modaco, hope someone will found it usefull even here on XDA.
I left modaco's link, since every ICS rom is hosted there (with changelogs and buglists), hope anyone won't mind.
Very helpful guide.
You should also add an optional "step g" about reverting back to previous re-partitions just in case.
And, so sorry for Italia tonight. I really wanted them to win!
a big error in step D manytimes. So this method is really not working for me. So I will repartition my Blade by an old way using WIN program
EDIT:
sbd who can help me? Because I did't find any good TPT partition for ICS (need 20/200/242MB) - so I need my own made by TPT helper.
my problem is, that MD5 doesn't match: 11/13 match, but the two of them not (espetialy appsboot.mdn and partition_zte.mbn). And after restarting to service mode it write only 4x error instead of partitioning. Thanks very much for help.
Majkl007 said:
a big error in step D manytimes. So this method is really not working for me. So I will repartition my Blade by an old way using WIN program
EDIT:
sbd who can help me? Because I did't find any good TPT partition for ICS (need 20/200/242MB) - so I need my own made by TPT helper.
my problem is, that MD5 doesn't match: 11/13 match, but the two of them not (espetialy appsboot.mdn and partition_zte.mbn). And after restarting to service mode it write only 4x error instead of partitioning. Thanks very much for help.
Click to expand...
Click to collapse
Try the one made by Konstat and use KonstaKANG instead of CFX. Since it's only a slimmed down version of CFX, you won't lose any ICS experience.
Then how to go back my stock layout if warranty claims,can I backup my current tpt.
Sent from my Blade using xda premium
rohitzz said:
Then how to go back my stock layout if warranty claims,can I backup my current tpt.
Sent from my Blade using xda premium
Click to expand...
Click to collapse
Wbaw long time ago posted GEN1 stock TPT here (bot repartition and downgrade the Blade to GEN1): http://forum.xda-developers.com/showthread.php?t=1258855
You can use it, then reflash your stock rom from here: http://forum.xda-developers.com/showthread.php?t=1353526
Idk for GEN2/3
I'm having a Gen 2 blade then why to downgrade it..
Sent from my Blade using xda premium
What is md5sum and how to check it.???
Sent from my Blade using xda premium
rohitzz said:
I'm having a Gen 2 blade then why to downgrade it..
Sent from my Blade using xda premium
Click to expand...
Click to collapse
Original TPT was made in order to upgrade the phone to GEN2, since most of the roms runs only on GEN2. So if you have to send the phone back for RMA, you have to "downgrade" it since TPT/Root/Custom Roms broke the warranty (flashing GEN2toGEN1 TPT + Stock roms take your phone to the original status, so no one will notice that you did nasty things to it ).
If you have a phone sold with GEN2, you have to find the stock GEN2 TPT, i don't really know if there's one available and if there's any stock GEN2 rom somewhere.
What is md5sum and how to check it.???
Click to expand...
Click to collapse
Any MD5 calculator or sfv/md5 verification program can be used. MD5 is an hash that you can use to check if the downloaded/extracted/copied file is corrupted.
I checked md5sum of stock gen2.zip with an option in tpt helper ,it tells 12/12 matches what does it mean ,can I flash stock tpt afterwards..???
Sent from my Blade using xda premium
rohitzz said:
Then how to go back my stock layout if warranty claims,can I backup my current tpt.
Sent from my Blade using xda premium
Click to expand...
Click to collapse
Didn't they stop selling Gen1 phones nearly a year ago? Only had 6 month warranty on mine I think.
---------- Post added at 10:35 PM ---------- Previous post was at 10:32 PM ----------
CTRL+ALT+DEL: You probably just want 2mb cache, no idea where you got 20 from, setting it to that size means it's either totally wasted or you can't install large apps from Play Store. You want either 2mb (for any custom rom) or 35-50mb cache (if you want an unmodified stock rom to work), it doesn't make any sense to pick a value in the middle. Apart from that, nice guide.
wbaw said:
Didn't they stop selling Gen1 phones nearly a year ago? Only had 6 month warranty on mine I think
Click to expand...
Click to collapse
One of my friends bought a OSF in UK in December and got a GEN1 one.. idk if they are still selling GEN1 phone right now or they switched to GEN2 (are they still selling OSF in UK? In Switzerland they removed it from the Orange website and put the Orange Dublin instead)
wbaw said:
CTRL+ALT+DEL: You probably just want 2mb cache, no idea where you got 20 from, setting it to that size means it's either totally wasted or you can't install large apps from Play Store. You want either 2mb (for any custom rom) or 35-50mb cache (if you want an unmodified stock rom to work), it doesn't make any sense to pick a value in the middle. Apart from that, nice guide.
Click to expand...
Click to collapse
Yeah, I really need to change that part (my actual layout has a 2mb /cache).
When CFX first came out, Tilal said that 20mb of cache was needed, but don't remeber why.
Will upgrade my guide in the next days, adding "How to go back to stock layout" and the 2mb cache part. Can someone provide me stock GEN2 partition size (I've never found a stock GEN2 TPT like the one wbaw did for GEN2toGEN1).
@rohitzz:
If your phone was sold with GEN1 you can go back with wbaw's TPT.
If your phone was sold with GEN2 idk if there's a GEN2 stock TPT somewhere (but I think you can make one using stock partition size when you use TPT Helper)
Does TPT Helper support Idea (Chienese) Blade ?
CTRL+ALT+DEL said:
Here's a simple noob-proof TPT Guide for repartioning/upgrading your ZTE Blade/Orange San Francisco in order to run Android 4.0 (ColdfusionX or AOKP)
I'm assuming that you're running on a rooted system, if not, check the forum to know how to root your rom.
Click to expand...
Click to collapse
Thanks for a very good guide.
I have a Idea (Chinese) ZTE Blade with 256 MB RAM.
Blade Checker 2.1 reports it's a stock Gen 2 phone.
It is with stock partition sizes as below.
/system 220MB
/data 162MB
/cache 37MB
Now my question is does TPT Helper 2.0.3 (or other) supports this phone for making custom sized partitions.
Thanks in advance.
Thank you.
I have been trying to flash a colleague's Blade with CM10 (from CM7) for a few days, and just could not get it to TPT at all, despite following other guides.
Your thread unlocked the problem, which was that Gen1 upgraded to Gen2 is not the same as Gen2 when it comes to flashing TPTs. We built a custom TPT after getting TPT helper set up properly and lo and behold, it worked first time.