Database Users

[Q] BIg problem

I tried to instal new room when i finised i have bootlop an i try to go to recovery but not working,then i tried seus but teling me that i have latest software and no repair buton instal anyway this buton is gone what to do .I am on stock kernel so wat to do is ther any way to instal stock room or whatt help meee

Repair with PC Companion
http://www.sonyericsson.com/cws/sup...oads/subject/pccompanion/xperiax8?cc=gb&lc=en

I cant pc companon want to turn the phone but i cant turn the phone becouse wont bot only sony ericson leters

Go to PC Companion > Click on Support Zone > Click on Repair.
Click on a blue link "repair your phone" (or something like that)
It will download all the necessary stuff and ask you to put you phone in flash mode.
Flash mode: turn off your phone, press back button while you plug the USB cable. The green led will turn on.
Just wait until the process finish. Unplug the USB and your phone will be rebooted.

help i cant repair seus no pc compainon no its said ,seus you have latest software, pc companion ther is no new software yet for your phone

Haha I was about to help then somebody else did.
Just note, afted this you have to root your phone all over again. Back at where you started. Remember to fully understand things before doing it, or it could cause a lot of troubles and time wasting!
Hit the THANKS button if I helped you!
This mail was delivered from my W8 using Tapatalk!!

no it wont i click repair evrithing is starte preparing hold back key an then ther is no software upate ,i tried to flash this room [X8] Achotjan Semc Debrand Engine | V1.0_Beta1 | FreeXperia Project and now i am stuck please help

When you run PCC, left your phone unplugged. The software will not identify the phone, so you have to click on this link as I show in screen below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

yes i did an then this after prepering to repair this room is messed my phone http://img11.imageshack.us/img11/7344/capturexti.png

hunn.. for me always work... it download software, prepare, then you plug phone, it install and finish.
i dont know about/why this error, sorry

yes for mee to always worked but now stuck after this room

wotanclient 350 save my ass
this app flashed me new firmware you have to register and you have one poen to do firmware on the phone.Atlast my phone is working again

Relax that is a soft brick and very simple to fix.
PCC and sues won't work for most people. You will need to download and repair with flashtool. Download the x8 ftf file and flash. Just Google xperia x8 softbrick to find the thread with the downloads, I would do it for you but I'm on my phone.
Sent from my XPERIA X8 using xda premium

How to relock your bootloader [tut]

Aslaam Alaikom.."Hi"
I tried this way and it work 100%
and I get my stock phone 100%
and locked bootloader
YOU NEED..
1) Flashtool last verson LINK
2) File FTF Which acceptable to you
THEN..
install flashtool then open it
copy your ftf file into smething like this "by default installing" C:\Flashtool\firmwares
turn off your device then hold volume down while connect USB to your device
flashtool will tell you if it know your device
then press in flashtool first button seems like lightning
select flashmode then select from a device column "c6903"
then press flash..
it may take sometime
after finishing
click on BLU button then click on relock
then
just unplug your device and turn it on
your device is 100% stock..:good::good:

This does NOT relock the bootloader!
Dial *#*#7378423#*#*
Goto software info and configuration.
The last line will still say
Bootloader unlocked: yes

gregbradley said:
This does NOT relock the bootloader!
Dial *#*#7378423#*#*
Goto software info and configuration.
The last line will still say
Bootloader unlocked: yes
Click to expand...
Click to collapse
sorry..
I just forget on more step which is BLU button

But if you want to do that, you do not need to do any of the previous stuff,
Just clicking on the BLU and choosing relock is enough....
If you have a stock kernel there is no need to do all the previous stuff
If you are on a custom kernel, then you need to flash a stock FTF to get stock kernel and stock system back, otherwise, just clicking the button is enough..
Too much...

gregbradley said:
But if you want to do that, you do not need to do any of the previous stuff,
Just clicking on the BLU and choosing relock is enough....
If you have a stock kernel there is no need to do all the previous stuff
If you are on a custom kernel, then you need to flash a stock FTF to get stock kernel and stock system back, otherwise, just clicking the button is enough..
Too much...
Click to expand...
Click to collapse
Immmm actually I tried what you said but my phone couldn't boot even I had stock kernel
After trying this way everything is ok

How do you know if your bootloader is unlocked,does it show some kind of logo or text.I can remember on Motorola it would say bootloader is unlocked on start up.

adamo86 said:
How do you know if your bootloader is unlocked,does it show some kind of logo or text.I can remember on Motorola it would say bootloader is unlocked on start up.
Click to expand...
Click to collapse
Actually there is no blue light when you boot your device and you can check as this pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
^^^
This is my device after relocked

musab said:
Actually there is no blue light when you boot your device and you can check as this pic
^^^
This is my device after relocked
Click to expand...
Click to collapse
I don't see blue light.and I haven't unlocked the bootloader on this phone.

Reset to factory stock XNPH38R

Hi All,
if you want an easy way to reset to stock, this is it. Works like a dream, for that squeeky clean, out of the packet install feeling.
This method uses a full 38R factory image from cyanogenmod.
I take no glory for this as our hero @MooDeeY has done the hard work.
You can find the original cyanogenmod files here
http://builds.cyngn.com/factory/bacon/cm-11.0-XNPH38R-bacon-signed-fastboot.zip
MD5: 01e7fc376c13614d38f5c4201310a1bb
http://builds.cyngn.com/factory/bacon/cm-11.0-XNPH38R-bacon-boot-debuggable.img
MD5: 88209189b99ffb7a6bf2534c3b03ab80
No ota baggage here!
"Step 1: Download full XNPH38R rom from here, with adb files & extract it.
https://mega.co.nz/#!NtUxwbBQ!YyOIreiqfJKCC6ZKNwlxi5ubskTLSGKH-DwR39hF_IM
Step 2: Make sure that your phone isn't connected to your PC via USB, because its some times prevent phone from entering fastboot mode correctly.
Step 3: Press VOL+ & Power Button. until you see Fastboot logo. it should be like this picture.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: Some times it ask to confirm if it's your first time to unlock it if you came from Color OS version.
you can use volume buttons to choose between menus and choose yes & Power button for confirm.
Step 4: Connect your phone to pc.
Step 5: In folder that you downloaded in first step you will find a file called Bootloader Unlock just press it & press any key on your keyboard to begin unlock your boot loader.
Step 6: Your phone will restart after unlock. Power it off again & Do Steps 2,3,4 again.
WHY I SHOULD USE THIS WAY !!
- if you have chinese version (Color OS) & want to make it 100% Original cyanogen.
- if you device is bricked or boot loop and can't make it work again.
- if you facing errors after OTA update.
- if your version is too old & want to install latest one without install any previous update.
- if you facing wi-fi issue or connection problem.
** this way install a complete rom from A-Z including stock recovery, modem, boot image, etc.....
Step 7: You will Notice that there is others two files in folder:
Install Rom 16GB = for 16gb phone.
Install Rom 64GB = for 64gb phone.
just open it, press any key, it will start installing new rom for you & lock your bootloader again.
Notice: When downloading using google chrome, maybe a warning message appears to you, this because folder contain .bat files. it's completely safe."
I have been running this since about 10:30 ths morning and it has been problem free. I also got the best antutu score I ever got for this rom on the oneplus with this method, so its cool in my book. I also noticed a big reduction in battery usage, but theres no stats behind this claim.
One last point, this does use the latest images. Its just that cyanogenmod have not updated their website yet.

Why lock the bootloader on the end?

Finally, there's some legit 38R factory images! Why do they still have 33R on https://cyngn.com/products/oneplusone? Thanks for the link! :laugh: :good:

Schrotty35 said:
Why lock the bootloader on the end?
Click to expand...
Click to collapse
Because it returns to stock. You can edit this out in the script if you want it left unlocked.

There's no need to relock the bootloader. In fact, in several cases locking the bootloader has resulted in not being able to unlock it again.
Transmitted via Bacon

the link in step one dosent work, could u put up the link again
thanks, i bricked my phone

Nooblet - Need help with my 1+2

Hi,
I bought my phone from Aliexpress. I am very happy with it, but I am facing some issues:
It was pre installed with some diffrent kinds of bloatware.
- Baidu Browser
- DU Battery Saver
- DU Speed Booster
And more see picture -
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
From time to time it tries to download some kinds of files. Seems to be Bloatware aswell. See picture -
In addition to this, the phone also fails to install update: OxygenOS 2.1.1.
I get a message after the reboot, that the install failed, click to reboot.
I've tried to follow this guide "youtube . com/watch?v=-IGDZxeFHAc" with out hope. Most likely something that I am doing wrong.
I have managed to:
Click the RunMe bat file
Install USB drivers
Unlock bootloader
When I try step 4 Flash TWRP Recovery I get to the following message: " Did you see the "okay", then congratulations you have flashed in the recovery "
I did not see the Okay message, and when I press THE any key to quit and boot to recovery, nothing happend its just stuck on Fastboot mode.
Please if anyone could help me I would be very greatful!
Kind regards ..
Kissfiss

kissfiss said:
Hi,
I bought my phone from Aliexpress. I am very happy with it, but I am facing some issues:
It was pre installed with some diffrent kinds of bloatware.
- Baidu Browser
- DU Battery Saver
- DU Speed Booster
And more see picture -
From time to time it tries to download some kinds of files. Seems to be Bloatware aswell. See picture -
In addition to this, the phone also fails to install update: OxygenOS 2.1.1.
I get a message after the reboot, that the install failed, click to reboot.
I've tried to follow this guide "youtube . com/watch?v=-IGDZxeFHAc" with out hope. Most likely something that I am doing wrong.
I have managed to:
Click the RunMe bat file
Install USB drivers
Unlock bootloader
When I try step 4 Flash TWRP Recovery I get to the following message: " Did you see the "okay", then congratulations you have flashed in the recovery "
I did not see the Okay message, and when I press THE any key to quit and boot to recovery, nothing happend its just stuck on Fastboot mode.
Please if anyone could help me I would be very greatful!
Kind regards ..
Kissfiss
Click to expand...
Click to collapse
Download the latest stock firmware from http://forum.xda-developers.com/one...rs-official-oxygen-os-roms-ota-t3209863/page9 and flash that using TWRP. Accessing TWRP after flashing it using fastboot is volume down and power. There flash the stock rom, and it should give you a fresh new OP2

[Redmi Note 3 [Mediatek] - Dead Phone - Solved - Guide]

Hi,
For all those who have a dead Redmi Note 3 and not beed able to recover it yet, here is a simple guide which I have tried many times to bring life back to my RN3. Well, the solution is simple. I am using Win 7 64 bit edition.
First, use the SP-Flash-Tool-v5.1532.00 and install the latest stable fastboot ROM, but remember to "ENABLE" the first preloader option in SP Flash tool. When it is finished and you seen GREEN Mark in the end, Try to boot your phone by pressing power button for 10 seconds. If it boots, no need to go to next step. But if nothing happens, go to Next step.
Now download SP_Flash_Tool_exe_Windows_v5.1516.00 and install the same fastboot ROM, but remember, this time "DISABLE" the first preloader option in SP Flash tool. When it is finished and you seen GREEN Mark in the end, Try to boot your phone by pressing power button for 10 seconds. Your phone must vibrate and power ON after some seconds. Thats it. Here are some imp links if needed.
1. Install drivers and restart PC
https://mega.nz/#!DtIhzSiD!qLmplkvEQ-ZSegaGbpyMuzH198b90joNhkPkJa6hzWg
2. Download or use a OFFICIAL AND STABLE FASTBOOT ROM
http://bigota.d.miui.com/V7.1.6.0.L...HNCNCK_20160107.0000.12_5.0_cn_434e06a8a9.tgz
http://www.mediafire.com/download/zcc0vzca9o1xt5d/SP_Flash_Tool_v5.1532.zip
https://www.mediafire.com/?tpjg4jtdf7sj40t (SP_Flash_Tool_exe_Windows_v5.1516.00)
Thanks and courtesy of jamflux
http://en.miui.com/thread-221115-1-1.html

will this work dead phone bricked because of official update MIUI 7.1.13.0 LHOCNCL

vkeymi3 said:
will this work dead phone bricked because of official update MIUI 7.1.13.0 LHOCNCL
Click to expand...
Click to collapse
I hope it will work on any RN3.

Can I do the same for Redmi Note 3G?

Broken Link
Hello
The mega link doens´t work
Thanks

Leyrio said:
Hello
The mega link doens´t work
Thanks
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24052804347767433

redmi note 3 dead
My Redmi Note 3 (Mediatek), by mistake I erased completely using SPflash tool in "format all" mode.
now its not turning on (DEAD).
Symptoms:
1. Red light for first few minutes while charging after that red light goes off.
2. when red light turns off, my PC detects phone for a second.
3. Mediatek COM port goes on and off for few seconds.
Whats next?
can I recover my phone in this condition?
if yes then how?
how to deploy bootloader/Fastboot?
how to deploy ROM on this device?
are hennesey correct ROM for mediate device?
can I do the above procedure with my phone?

Thanx Dear
Its Working ..Lots Of Thanx:good:

use SP flash tool SP_Flash_Tool_v5.1728_Win
check preloarder
WORKK 100000%

woprex said:
use SP flash tool SP_Flash_Tool_v5.1728_Win
check preloarder
WORKK 100000%
Click to expand...
Click to collapse
its work.. thanx a lot.. :good::good::good::good::

May I know how long is the process? I waited for 15 mins and nothing happen, no "green" bar..

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​

Allah Apnake er chay uttom bodla dan koruk vai