have been running cm9 for a couple days and not quite sure how to boot back to stock gingerblur. I did not flash cm9 with fastboot but with rom manager. Since i did not have an SD card during the process can i get back to motoblur? Nothing comes up in recovery to restore so i'm kinda confused. If i cannot can i wipe everything and start out fresh with an sd card properly and backup?
Is it possible that i backed up on internal storage? When surfing through the recovery options i found through install zip-internal sd-cwm/restore a file dated the same day. Nothing comes up in backup/restore.
I appreciate the help, bit of a noob
Did you back up your rom which you want to restore?
Sent from my MB860 running Jokersax's CM9
If you did do a back up and then wiped everything it sounds to me like it wiped that back up off as well no you can get back to the stock rom by flashing a fuit cake i belive but i would suggest flashing CM7 or neutrino you will be much happier on one of those
Related
Ok apparently in my futile attempts to OC the Pure Hero 1.0 Rom I've totaly got something hosed up. The phone works but features that others have working flake out on me. Is there a way to wipe fully the whole thing and reset back to the rooted 2.1 Rom as we did before the Recovery image.
If it is as simple as just flashing the original developers Rom please don't flame me..I did search.
I do a factory wipe then Dalvik Wipe then Ext Partition wipe before flashing an image.
I currently can't get Wifi to work on Punk.Kaos Rom nor on the Pure Hero (I think that was an issues though)..
Thanks for all the hard work you guys do....
copy a rom you want to use to your sdcard. then go into recovery, wipe the phone, then flash zip from sdcard. done!
That is what I have been doing and some of the settings are still flaking out and the Kaos rom is V15 he fixed wifi in v2. I can't even get Jamezelle's sensable rom to even flash with out a boot loop at animation.
Thanks for the help.
No nandroid backup?? I know before flashing the first Rom on the phone I made a nandroid back up on my wifes and pretty much do everytime before flashing a new rom. These things are priceless
Follow the the original root procedure.
*Suggestion*, when phone boots.... open setcpu and adjust the CPU OC setting.... maybe...
id say go to the downgrade to 1.5 from 2.1 root thread and do that and then re upgrade and reinstall the recovery image.
I agree with doing a full downgrade to 1.5 and rooting again. I had problems similar to yours and this solved the problem. Good luck.
-------------------------------------
Sent via the XDA Tapatalk App
Thanks I just wanted to confirm that should be the process of going to 1.5 thne to 2.1 and restoring the Recovery. One last question and then a Mod can close this thread. The Rom Manager in the Market will that work for us or is that a Droid only thing?
Thanks for the great advice.
Forgot to answer the nandroid backup yes did it before every new flash of a Rom they would come back weird also. Secondly how do I get my SD card back to full Fat32 and not the ext+Fat partition for A2SD mode? I never could get the A2SD to work fully.
Hi everyone. I had a few questions about flashing new roms on my kindle and was hoping to get some help
1. If I flash a new rom, like cm7, will i need to use titanium back up to save my apps and data. I remember doing this when i flashed a rom for my phone.
2. will flashing to cm7 prevent me from receiving OTA updates that amazon sends out. They just recently sent one a few days ago and the update unrooted the kindle. I wanted to see if I this is something I would have to worry about if i flash to cm7
3. once i do flash to cm7 and say another rom comes out, can i flash straight to the new rom or do i need to flash back to stock then perform the flash for the new rom.. again i remember having to do this when i was changing roms with my phone.
4. does the battery need to be fully charged before flashing
5. If i flash to cm7 then want to go back to back up (amazon stock software with root and gapps) will this make me loose my root access and twrp 2.0
Thanks
babbabooey97 said:
Hi everyone. I had a few questions about flashing new roms on my kindle and was hoping to get some help
1. If I flash a new rom, like cm7, will i need to use titanium back up to save my apps and data. I remember doing this when i flashed a rom for my phone.
2. will flashing to cm7 prevent me from receiving OTA updates that amazon sends out. They just recently sent one a few days ago and the update unrooted the kindle. I wanted to see if I this is something I would have to worry about if i flash to cm7
3. once i do flash to cm7 and say another rom comes out, can i flash straight to the new rom or do i need to flash back to stock then perform the flash for the new rom.. again i remember having to do this when i was changing roms with my phone.
4. does the battery need to be fully charged before flashing
5. If i flash to cm7 then want to go back to back up (amazon stock software with root and gapps) will this make me loose my root access and twrp 2.0
Thanks
Click to expand...
Click to collapse
1. If you are coming from another rom, then yes. But if you are updating your CM7, then you should probably backup your apps
2. I have had CM7 on my Kindle for like 2 weeks, and have not received an update. So I don't think so.
3. Like I said above in number 1. For example: If you are coming from Cm7 and want to try to flash ICS, then you would first backup your system, then wipe system, data, cache and Dalvik-cache, just to make sure. But if whistlestop releases a new version of Cm7 that fixes the MAC adress, then you would boot into recovery, A backup is optional but is recommended., then wipe cache and Dalvik-cache only, then flash the updated rom on top of it.
4. It says that it is recommended to have a full battery, but I have not yet flashed a rom with a full battery, and I have not occured problems.
5. I think if you get an OTA update after flashing back to stock, then you will probably loose root access again and TWRP. But don't worry, after you get TWRP back, you will still have all your backups.
AWESOME! Thanks for all your help.
one more for you. so i just rooted and installed twrp and did a system back up. then i want to flash cm7. now i am running cm7 and decide to try ics so i do another back up before i flash to ics, will the cm7 override the original back up that i did before flashing cm7 or will i now have 2 different back ups i can restore if i wanted too.
babbabooey97 said:
AWESOME! Thanks for all your help.
one more for you. so i just rooted and installed twrp and did a system back up. then i want to flash cm7. now i am running cm7 and decide to try ics so i do another back up before i flash to ics, will the cm7 override the original back up that i did before flashing cm7 or will i now have 2 different back ups i can restore if i wanted too.
Click to expand...
Click to collapse
There will be 2 different choices when you go to restore. But the problem is that when you make 2 backups the same day, its hard to tell which is which. So when I make a backup I mount USB with the option and rename the 12-27-11... file to something like CM7-12-27 or something of the sort.
Sent from my LG-VM670 using Tapatalk
Thank you sir
So.. After owning this phone for a year, I still love it to death..
But after many roms and such its been kinda slowing down on me..
what I would like to do, because I heard it helps a lot, is to revert back to the original software, then put a rom on fresh..
I'm running Synergy Rom now.. And it just locked on me.. It keeps rebooting, so I figure now is the time I do this..
Questions..
I will no have to lose my root? right?
How do I do this now? I'm using clockwork and assume I put the original rom(or zip?) on my sdcard, then go into recovery, and run it?
Correct?
I also ran a script file (v6supercharged)
I assume I will have to redo that as well?
Thanks guys!!
Have no phone right now, so would like to get started asap..
Again!! MUCH THANKS!!
As long as you fully wipe using Amon Ra, you should be able to make most updated ROMs run fast on your phone. Perhaps try reflashing Synergy. I also recommend flashing a new ROM, but reinstalling apps without data. Perhaps that is contributing to the sluggishness.
Sent from my PC36100 using XDA App
Thanks.. But I've been told over and over, its sometimes good to revert back to stock..
Wipe/clear, Install stock rom (or its an .exe. or something?) then wipe/clear again, and put the rom on..
Anyone have the stock file??
Do I let it update or no ??
fastfed said:
Wipe/clear, Install stock rom (or its an .exe. or something?) then wipe/clear again, and put the rom on..
Click to expand...
Click to collapse
That's ridiculous. A wipe is a wipe.
In fact, using the RUU (.exe) is riskier since it flashes radios and such, and if something goes wrong during, you have a bricked phone. Just do a full wipe including cache/dalvik cache and install your ROM of choice, along with a good kernel.
fastfed said:
So.. After owning this phone for a year, I still love it to death..
But after many roms and such its been kinda slowing down on me..
what I would like to do, because I heard it helps a lot, is to revert back to the original software, then put a rom on fresh..
I'm running Synergy Rom now.. And it just locked on me.. It keeps rebooting, so I figure now is the time I do this..
Questions..
I will no have to lose my root? right?
How do I do this now? I'm using clockwork and assume I put the original rom(or zip?) on my sdcard, then go into recovery, and run it?
Correct?
I also ran a script file (v6supercharged)
I assume I will have to redo that as well?
Thanks guys!!
Have no phone right now, so would like to get started asap..
Again!! MUCH THANKS!!
Click to expand...
Click to collapse
If you rooted with unrevoked or revolutionary, you will need this file to return to stock, and yes, you will temporarily lose root.
http://dl.dropbox.com/u/38127313/Un....15.00.0808_NV_2.15_release_220182_signed.zip
Change the name to PC36IMG and run it from the root of your SD card through the bootloader. You will lose your root, but your security flag should still be off (S-OFF) so that you can quickly regain root after running this file, after changing it to PC36IMG in place of the first one. (It is Amon-RA and not clockwork. You can reflash clockwork later if you want, which I don't recommend.
http://dl.dropbox.com/u/38127313/Root 2.3.3/PC36IMG3.08.zip
Also, you might need to flash a superuser app, in case you need root inside the stock ROM. Here is an old one, but it should still work for you.
http://dl.dropbox.com/u/38127313/Root 2.3.3/su-2.3.6.2-efgh-signed.zip
Like the previous users said, it's probably not necessary, but I'm just giving you what you asked for.
hmmm.. so now its not necessary ? I was always under that impression..
Ok..
Anyone know what the new HOT rom is ??
Gigerbread please ?
Like I said I was using Synergy..
Used Fresh before and a couple others..
whats the hot rom ??
FYI I also partitioned my SD card, or whatever its called.. For the gigerbread thing..
Put MikG 3.0 on it and call it done. Rock solid ROM, great battery life, and awesome tweaks built in. It will be like an all new phone. Enjoy
Sent from my PC36100 using xda premium
This is why I stress making a nandroid of your stock/rooted immediately after Rooting.
You may want to simply reformat your SD Card. I've been having a few issues and realized it's been months since I cleaned up and reformatted/repartitioned my SD Card, so I plan on doing that tomorrow and flashing a new ROM
Use "Best Method" for Cleanest way (Wiping)
OLDER: Froyo v2.2 (3.70.651.1) http://keetsa.com/files/RUU_SuperSo...15.00.11.19_NV_1.90_release_161482_signed.exe
Most Current version is "Gingerbread v2.3.3 (4.54.651.1).EXE" http://www.multiupload.com/LLV12N2WU8
with "xxx.EXE file", You'll need to Run it on Widows and install on Phone thru Micro USB plug.
BEST Method to install Most Current STOCK ROM:
1. Download + Rename to "PC36IMG.zip" on SDCARD + (Boot into Recovery +Install) "AmonRa Recovery v3.11-gnm" http://dl.dropbox.com/u/34586908/PC36IMG-ra-supersonic-3.11-gnm.zip
2. (Boot into Recovery), WIPE these 8 lines (All data/factory Reset, /data, /cache, /sdcard/.android_secure, /system, Dalvik-cache, battery stats, rotate settings)
3. Download + Rename to "PC36IMG.zip" on SDCARD + (Boot into Recovery +Install) "GB v4.54.651.1.ZIP" http://db.tt/Ck6AB18E
If you want non Stock Recovery + Rooted:
1. Rename your "(AmonRa Recovery v3.11-gnm) PC36IMG.zip" to "PC36IMG.zip" again. (Boot into Recovery +Install). (cus Stock Rom changed you to STOCK Recovery)
2. (Boot into Recovery + Install) "Root (Superuser-3.0.7-efghi-signed).zip" www.mediafire.com/?16a07x3800wvak6
No need to revert to stock.
Use vr superwipe
Save the contents of your sd card to a computer, then reformat the sd card
Wipe everything on the wipe menu, then flash a new ROM.
copy the titanium backup directory back to your sd card and restore apps without data first, then restore data of any games or what not.
Problems should be fixed.
Sent from my PC36100 using Tapatalk
You have a lot of options here. As the preceding posts may have eluded to. Depending on how consistent and deep your issues are, there are different steps that need to be taken.
You can always wipe the ROM and reflash. Do a dirty flash, by just wiping cache and dalvik, then reflashing. That tends to be my temp work around sometimes.
Worst case I've seen is reverting to stock. Unrooting. And starting back over.
With any new ROM you'll need to reflash your mods. Becareful tho of what mods you're using. Not all are compatible across the board.
HipKat said:
This is why I stress making a nandroid of your stock/rooted immediately after Rooting.
You may want to simply reformat your SD Card. I've been having a few issues and realized it's been months since I cleaned up and reformatted/repartitioned my SD Card, so I plan on doing that tomorrow and flashing a new ROM
Click to expand...
Click to collapse
Did reformatting the SD card help? I just realized and did the same thing. It had been a good 3-4 from changes and about a year since I formatted my card.
It helps a lot. I reformat mine about every 3-6 months
Swyped From The Hippest MIUI'd phone Using XDA Premium
I am used to rooting and nandroiding ROMs, at least on my phones: Hero, OG Evo and 3D Evo, but at this point I'm not rooting my NC. I want to back up my stock NC, which presumably has 1.3 on it, as I got it for Christmas. I ran roustabout's script to stop OTA updates. I might want to try the update, eventually. Hence I'd like to back up the stock ROM I have now, and be able to restore it, in case I don't like 1.4.1. Thanks for any help in advance. I did search, but since I'm not rooting, wasn't sure how to do it.
BTW, using Racks' multi-boot from SD card, I can boot into either CM 7.2 (Kang) or ICS. It does what I want, and runs pretty fast from my SD card. And, if I'm at B & N, I can remove my SD card, boot into the stock ROM and still read for free!
Just make a bootable clockwork card and use the backup option and you will get a nandroid of your current set up.
Sent from space
Hi,
So I got my girlfriend this gift basically right when it came out. I rooted it, and flashed CM 7.1 RC1 (literally came out that day) a long time ago.
She gave it to me yesterday to get her PDF's on there. I opened the market and nothing would pop up except for the like 5 total apps, while the Browser was working 100% fine. I go to my apps in the market and try downloading updates and they kept failing. I was frustrated, so I downloaded the latest Cyanogen Nightly and Gapps. I updated CWM to 6.0.3.1, then made a backup of the existing ROM. I went into recovery, and tried finding the Nightly and Gapps I downloaded, but the SD Card would never mount. I'm not sure how I can fix this.
Please help, thanks a ton!
Jimmy
hmmm what about putting the stuff in the phone memory and flash there
Jimmy058910 said:
Hi,
So I got my girlfriend this gift basically right when it came out. I rooted it, and flashed CM 7.1 RC1 (literally came out that day) a long time ago.
She gave it to me yesterday to get her PDF's on there. I opened the market and nothing would pop up except for the like 5 total apps, while the Browser was working 100% fine. I go to my apps in the market and try downloading updates and they kept failing. I was frustrated, so I downloaded the latest Cyanogen Nightly and Gapps. I updated CWM to 6.0.3.1, then made a backup of the existing ROM. I went into recovery, and tried finding the Nightly and Gapps I downloaded, but the SD Card would never mount. I'm not sure how I can fix this.
Please help, thanks a ton!
Jimmy
Click to expand...
Click to collapse
Since you did it so long ago, do you remember if you installed the CM7 to emmc or SD? That may be your issue.
And how did you get 6.0.3.1? Rom Manager? That may be your issue too.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
Since you did it so long ago, do you remember if you installed the CM7 to emmc or SD? That may be your issue.
And how did you get 6.0.3.1? Rom Manager? That may be your issue too.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Thanks for the responses! To be 100% honest, I don't remember how I rooted/flashed. I know I had to buy an SD card for it though, and the SD card is labeled BOOT
I did get 6.0.3.1 through ROM Manager.
Jimmy058910 said:
Thanks for the responses! To be 100% honest, I don't remember how I rooted/flashed. I know I had to buy an SD card for it though, and the SD card is labeled BOOT
I did get 6.0.3.1 through ROM Manager.
Click to expand...
Click to collapse
Do you need the SD inserted for it to boot to your CM7? If so, you installed to SD and with an SD installation, you do not use CWM to install upgrades. That is why you cannot see the zip you downloaded. If you want to upgrade a CM7 SD install to CM10, you need to start over with a newly burned SD. The old SD setup is not compatible with CM10. Use my guide linked in my signature.
You might just want to put CM10 on internal memory, replacing whatever is there. Just download the new CM zip to emmc with CM7, boot to emmc CWM, remove the SD, wipe data/factory reset and flash the new CM zip using the "install from SD/choose from internal memory" option. Then you need to flash the right gapps to match. Then reboot. Once you are sure everything is working, you can format your old SD with SDFormatter so it can be used as a normal data SD. Get it free on the web.
Sent from my Nook HD+ running CM10 on Hybrid SD