Hello there, i'm new in the forum, so please say me if i do something wrong.
I bough my huawei u8800 yesterday and i've tested ICS Aurora, but i think it's not smooth like the gingerbread stock rom. So i've installed the OC kernel for gingerbread, but it has a little problem: low in call volume. I searched and there is no way to fix it.
So i'm here to ask you if there is a kernel for stock gingerbread that supports overclocking. Please feel free to suggest me any other rom.
If you don't go with aurora, I strongly suggest you go for EZET cyanogen 7.2 ROM (you'll have to revert to Stock Froyo first, or it won't work). All other .35 kernel based ROMs have bugs on top of bugs on top of instability...
EZET cm7 has very high volume in call, and you can even raise it more with x5settings app.
fjsferreira said:
If you don't go with aurora, I strongly suggest you go for EZET cyanogen 7.2 ROM (you'll have to revert to Stock Froyo first, or it won't work). All other .35 kernel based ROMs have bugs on top of bugs on top of instability...
EZET cm7 has very high volume in call, and you can even raise it more with x5settings app.
Click to expand...
Click to collapse
Hum... I think i'm going to test ICS again. Wifi bug is fixed? When i tested 2.05 yesterday, i couldn´t connect to network...
Related
...if so, let's do it
http://www.addictivetips.com/mobile/what-is-miui-rom-for-android-miui-port-complete-guide/
what's MIUI mean lmfao
El_Nino9 said:
what's MIUI mean lmfao
Click to expand...
Click to collapse
Come on... You could have at least googled it.
That aside, I think that once we get a working AOSP build, then a MIUI build should be possible. Up to now, RIL has not been working on AOSP builds.
That would be awsome, but in english
addictivetips.com/mobile/what-is-miui-rom-for-android-miui-port-complete-guide
So what u gonna do about the battery drain? I've heard that miui drain battery much faster than the stock rom.
None of it matters until we get kernel source for 2.2 we won't get anything near working. And FROYO isn't even out for blade yet.
Eph.
Couldn't we just take the launcher, dialer, browser, music player, fonts and lockscreen from the MIUI rom and add them to a standard rom?
ephumuris said:
None of it matters until we get kernel source for 2.2 we won't get anything near working. And FROYO isn't even out for blade yet.
Eph.
Click to expand...
Click to collapse
Why? Froyo and Gingerbread work fine with older kernels. As far as I know there are no kernel customisations needed for MIUI so it should be possible to run it without building a kernel from source, but the 2G VM split in the ZTE roms will cause problems.
I did try to boot MIUI once, it didn't work, but I didn't try very hard. It should be possible.
If source was available it would be a lot easier. The messed up RIL setup on the blade will probably make it very hard to get RIL working without source.
amazing, don't we have a 2.2 kernel from the chineese which people at Modaco are already using?
Great News everyone. It is being worked on
http://android.modaco.com/content/zte-blade-blade-modaco-com/327783/wip-miui-porting/
Hi all
I see genokolar's latest cm7 rom for u8800 can't be used with franco's kernel. I use this combo now, on the v11118 rom. No doubt this'll get sorted soon, but...
If I want to update to 111128 now, or if this incompatible issue happens again, what can I do?
Does the geno cm7 rom include a "default" kernel?
If not, what other kernel options are there? Seems to be very few in the u8800 dev forums, and nothing seems to be actively maintained (note, not u8800pro!). Should I return to the stock kernel? And if so, how?
Thanks to all for the great work going on here, my u8800 would have been swapped for something else if it hadn't been for the awesome dev work being done.
every rom has its kernel...
thanks mate
Along time ago I used a MIUI rom, and it was awesome. Rock solid stable and easy to use. I think it was MIUI.us 1.11.18, or at least that is the rom I found in my U8800 folder.
I want to go back to MIUI again, but stability is of the utmost importance. I tried Miui V3 2.4.20 [2.6.35 & 2.6.32] [U8800], the .35 version, over in developer forum. I've had a lot of task bar crashes, and a couple of other weird things happen. I'm downloading the .32 version now to try, and I also went to MIUI.us and downloaded the latest version there (1.12.9).
I see there are a lot MIUI roms in the forums. Does anyone know of any other ones that near perfection in their stability. I don't need the latest and greatest updates, I need stability. I use my phone for work related stuff a lot, and a crash can cause some problems.
Thanks for the help.
EDIT: Just realized this isn't the Q&A section. If a mod wants to move it, please do.
Very strange things about notify bar you say. I've using sbasil's miui v3 and it's very stable for me. No reboots, no crashes, everything working. Maybe you just didn't updated to 35kernel (installed official 2.3) and that's why this happens. If did, try to do 3 wipes, flash rom, 3 wipes and install it again.
yeah, I thought it pretty strange too. I'm on B136, which is 2.3, so I'll try wiping/flashing it again.
typci said:
yeah, I thought it pretty strange too. I'm on B136, which is 2.3, so I'll try wiping/flashing it again.
Click to expand...
Click to collapse
fyi b136 is not 2.3. you have to use a 2.6.32.9 kernel based rom.
Moved To Q&A
Please post questions in the Q&A section
ezet said:
fyi b136 is not 2.3. you have to use a 2.6.32.9 kernel based rom.
Click to expand...
Click to collapse
Typo, sorry. I'm on B526. not sure why I typed b136.
Hey folks!
I'm back on stock after CM10 and wanna go CM7.
I was on CM7.1 long back and then was on TweetyPeety's excellent MIUI Pikachu Edition.
Then I was on CM10-2012-11-18 build, but was having problems answering calls which was unacceptable to me, so I tried to flash MIUI back but it was a bit off, so I decided to start from scratch and flashed FroYo 2.2.2 SEA SBF (My default stock FroYo which I love and trust)
But it all slows down after a few months and now am looking for CM7 based ROMS, and wanna know which one's better:
1) [ROM][CM7] WhiteRabbitNextGen Edition 2.1.1 *END OF THE WORLD RABBIT*
and
2) [DEV][ROM] CyanogenMod 7.2.0 (Android 2.3.7)
I am putting CM7.2 because I think it has smart dialing which I remember I sorely missed in CM7.1
But are there any good and latest CM7.2 or higher (but CM7 based only) ROMS?
Krusadr said:
Hey folks!
I'm back on stock after CM10 and wanna go CM7.
I was on CM7.1 long back and then was on TweetyPeety's excellent MIUI Pikachu Edition.
Then I was on CM10-2012-11-18 build, but was having problems answering calls which was unacceptable to me, so I tried to flash MIUI back but it was a bit off, so I decided to start from scratch and flashed FroYo 2.2.2 SEA SBF (My default stock FroYo which I love and trust)
But it all slows down after a few months and now am looking for CM7 based ROMS, and wanna know which one's better:
1) [ROM][CM7] WhiteRabbitNextGen Edition 2.1.1 *END OF THE WORLD RABBIT*
and
2) [DEV][ROM] CyanogenMod 7.2.0 (Android 2.3.7)
I am putting CM7.2 because I think it has smart dialing which I remember I sorely missed in CM7.1
But are there any good and latest CM7.2 or higher (but CM7 based only) ROMS?
Click to expand...
Click to collapse
My advice use mookee by stefan braun its the fastest rom on here and u wont be disapointed
Sent from my MB525 using xda app-developers app
Haven't tried the WhiteRabbit ROM. I gave Quarx's CM10 a chance over several months and decided to find something stable. WajkIUI based on MIUI and CM (stable GB version 3.1.27.) works great for me. Battery lasts up to 2 days even with a couple of 5% drops over that time. Its fast and smooth.
i like most mokee by euro_rules (modified version for defy+)! it's perfect! it looks great and no bugs at all
right now i'm using wiui gb and it's fine too but i think mokee is a bit better.. but miui looks prettier
the last whiterabbit is good and it looks like cm10
Thanks for the replies guys!
As I said, I have flashed CM 7.2 Official stable and am loving it!
The only problem I ever had with CM 7.x ROMS was the crappy ADW Launcher jitters in animations like swipe homescreen and open / close appdrawer.
I do believe its a problem with ADW itself because LauncherPRO works flawlessly giving as smooth animations (if not better) as the stock ROM.
The stock VSels are quite a bit high and I have notched it all down and undervolted to 300/25; 600/33; 1000/53.
Will also run V6 Supercharger and maybe even install latest CM 7 nightly which was recently updated: http://forum.xda-developers.com/showthread.php?t=1458729
Have also installed Swype which I just can't live without!
Now, As I see from the replies, there seem to be different variations for mokee OS for DEFY? which one should I try on my MB525 Red lense?
a) mookee by stefan braun
b) mokee by euro_rules (modified version for defy+)
BTW have to mention here something which I had to search and could not find readily:
The baseband for Indian users to select in CM7.x in built baseband switcher is: South East Asia 3.4.3-331
Krusadr said:
Thanks for the replies guys!
As I said, I have flashed CM 7.2 Official stable and am loving it!
The only problem I ever had with CM 7.x ROMS was the crappy ADW Launcher jitters in animations like swipe homescreen and open / close appdrawer.
I do believe its a problem with ADW itself because LauncherPRO works flawlessly giving as smooth animations (if not better) as the stock ROM.
The stock VSels are quite a bit high and I have notched it all down and undervolted to 300/25; 600/33; 1000/53.
Will also run V6 Supercharger and maybe even install latest CM 7 nightly which was recently updated: http://forum.xda-developers.com/showthread.php?t=1458729
Have also installed Swype which I just can't live without!
Now, As I see from the replies, there seem to be different variations for mokee OS for DEFY? which one should I try on my MB525 Red lense?
a) mookee by stefan braun
b) mokee by euro_rules (modified version for defy+)
BTW have to mention here something which I had to search and could not find readily:
The baseband for Indian users to select in CM7.x in built baseband switcher is: South East Asia 3.4.3-331
Click to expand...
Click to collapse
Answer a by stefan braun set it up rite and its the quickest youll get for gingerbread:thumbup:
Sent from my MB525 using xda app-developers app
i've found euro_rules version a bit better i think you'll have to try yourself..
the only thing i don't like is that you can't access cpu settings in boot menu.. you have to use app like rom toolbox! everything else is perefct!
which is the stable ROM for defy+ for Daily usage....plz do rply
thanks in Advance
coolshahabaz said:
which is the stable ROM for defy+ for Daily usage....plz do rply
thanks in Advance
Click to expand...
Click to collapse
Didint test CM 9s myself , coz i jumped from Stock to 2ndboot immediately CM 10 Cyanogen, but from what i can read - mostly all 4.0.4 are stable now.
CM 10s are also stable enough, used all versions of Cyanogen by Quarx from 2013 - suggest , if you decide to go that way to start with 0409 ROM. It has pretty good battery management, and no WiFI dropouts..All in all good choice..And no ringtone bug too.
If you get no WiFI and or no mobile signal - check FIRST aeroplane mode - it tends to boot with it on.
Just turn it off - and all works.
Cheerz
raven34 said:
Didint test CM 9s myself , coz i jumped from Stock to 2ndboot immediately CM 10 Cyanogen, but from what i can read - mostly all 4.0.4 are stable now.
CM 10s are also stable enough, used all versions of Cyanogen by Quarx from 2013 - suggest , if you decide to go that way to start with 0409 ROM. It has pretty good battery management, and no WiFI dropouts..All in all good choice..And no ringtone bug too.
If you get no WiFI and or no mobile signal - check FIRST aeroplane mode - it tends to boot with it on.
Just turn it off - and all works.
Cheerz
Click to expand...
Click to collapse
thx buddy i've installed latest CM10 and running well too....
at the start i got wi-fi problem, wi-fi is not starting but after tweaking the baseband all started well....
now the thing is that I can not overclock my cell stcuk on 1GHz stcok frequency....
anyone here plz suggest me what should i do to get overclocked CPU...
FURTHER
is that franco kernel updater will able to update the kernel???
coolshahabaz said:
thx buddy i've installed latest CM10 and running well too....
at the start i got wi-fi problem, wi-fi is not starting but after tweaking the baseband all started well....
now the thing is that I can not overclock my cell stcuk on 1GHz stcok frequency....
anyone here plz suggest me what should i do to get overclocked CPU...
FURTHER
is that franco kernel updater will able to update the kernel???
Click to expand...
Click to collapse
Think that read here on forums that SetVsel won't work well with CM10s..and tends to crash the thing ...look it up, not sure about it where i read it. If ur using it - try with something else. Also , read about developers pages - they are doing something wtih 3+ kernel but still very experimental.. check Quarx pages ull find all kinds of it there.
wajkiui 3.1.27 (gb) seems very stable, more than any other rom i tried including stock. second best would be stock (imo)
gsd99mg1 said:
wajkiui 3.1.27 (gb) seems very stable, more than any other rom i tried including stock. second best would be stock (imo)
Click to expand...
Click to collapse
But, its based on 2.3.7 , isn't it? My guess was we are talking about CM10 4.1.2...All 4.0.4 are fully stable and thats CM9. Your talking about CM7 if im not mistaken, and that's way old. For that to put on defy plus - you can leave stock..
raven34 said:
But, its based on 2.3.7 , isn't it? My guess was we are talking about CM10 4.1.2...All 4.0.4 are fully stable and thats CM9. Your talking about CM7 if im not mistaken, and that's way old. For that to put on defy plus - you can leave stock..
Click to expand...
Click to collapse
cm9/10 seemed too slow to me. stock is somewhat better but nowhere near gb-based miui. and the subject thread does not mention cm10. to me, the improvements of cm10 in terms of features do not make up for the loss in speed.