Related
I have screwed with my G2 a bit too much...
I bought it 2nd hand with CM7, then I screwed with it a bit, loading different ROMs, trying (and failing) to put the DZ Hboot on it, and other things.
Now, I have CM7 back on it but with the wallpaper that has carried over from BlissSense and the USB connectivity that wont work, nor will Settings open.
Could anyone tell me how to COMPLETELY wipe my phone and start again?
ROM manager isn't working well either, when I try to install a new ROM it reboots but just freezes on the HTC splash screen and doesnt make it into recovery.
Well 2 options:
1) COMPLETELY unroot and start over with the wiki/gfree method to get a good root etc.
2) Simply run ROM manager, flash an older recovery (I'm assuming it wont boot into recovery because its on a 5.x.x.x bad flash). I recommend just flashing the 3.0.2.4 version. After that, download a new ROM .zip (CM7 or whatever you want), put it on your SDcard. Enter recovery, do a COMPLETE wipe, clear everything, and flash the new ROM.
Don't backup any apps or anything. Just start over from scratch with this new ROM flash.
are you able to get into recovery at all though? if you can, search up SuperwipeG2+ in the dev forum and run that. that should wipe your phone 110% so you can install CM7 again.
martonikaj said:
Well 2 options:
1) COMPLETELY unroot and start over with the wiki/gfree method to get a good root etc.
2) Simply run ROM manager, flash an older recovery (I'm assuming it wont boot into recovery because its on a 5.x.x.x bad flash). I recommend just flashing the 3.0.2.4 version. After that, download a new ROM .zip (CM7 or whatever you want), put it on your SDcard. Enter recovery, do a COMPLETE wipe, clear everything, and flash the new ROM.
Don't backup any apps or anything. Just start over from scratch with this new ROM flash.
Click to expand...
Click to collapse
Thanks,
1) - I will try that after I try 2, but I will have to look it up cause I have no idea how to unroot.
2) Ok, I went into ROM manager and flashed 3.0.2.4, then i entered recovery, these are my options:
-reboot system now
-apply update from sdcard
-wipe data/factory reset
-wipe cache partition
-install zip from sdcard
-backup and restore
-mounts and storage
-advanced
-power off
What do I do now?
1. wipe data/factory reset
2. wipe cache partition
3. install zip from sdcard > seect ROM that I want
Ok, well I did this:
-Downloaded and put SuperwipeG2 on my sdcard (not SuperwipeG2+ cause I dont have GPS issues)
-Flashed Recovery 3.0.2.4 (Which was a downgrade)
-Rebooted to recovery
-installed from zip > superwipeG2
-wipe data/factory reset
-wipe cache partition
-install zip from sdcard > CM7.0.3.zip
Now it is a real nice fresh CM7!
Thanks GUYS!
Can I ask one more question?
I ran the PC10IMG.zip update to give my G2 a Desire Z HBoot (which was sucessful, vr no. is now .84 where as the old G2 was .76).
But when I go to System > about phone > system memory = 370MB
And data mem = 1.05GB
So I lost the usual 300MB from data mem but didnt make the 200MB gain in system mem!!! what happened?
Siddy1200 said:
Ok, well I did this:
-Downloaded and put SuperwipeG2 on my sdcard (not SuperwipeG2+ cause I dont have GPS issues)
-Flashed Recovery 3.0.2.4 (Which was a downgrade)
-Rebooted to recovery
-installed from zip > superwipeG2
-wipe data/factory reset
-wipe cache partition
-install zip from sdcard > CM7.0.3.zip
Now it is a real nice fresh CM7!
Thanks GUYS!
Click to expand...
Click to collapse
glad it worked out for you.
Can I ask one more question?
I ran the PC10IMG.zip update to give my G2 a Desire Z HBoot (which was sucessful, vr no. is now .84 where as the old G2 was .76).
But when I go to System > about phone > system memory = 370MB
And data mem = 1.05GB
So I lost the usual 300MB from data mem but didnt make the 200MB gain in system mem!!! what happened?
Click to expand...
Click to collapse
it just reports it improperly because some RAM is reserved. dont worry about it.
Today I rooted my U8800, I installed Clockworkmod, made a backup, and tried installing a Honeycomb ROM, I put the zip file in my SD card, and booted in recovery mode.
I did the following things: wipe data/factory reset; wipe cache partition, wipe dalvik cache, and tried installing the rom from my SD card, however clockworkmod didn't see the .zip file in my SD card, so I rebooted my phone and it didn't start. Then I chose recovery (from my backup) in Clockworkmod, still didn't work.
I can see the booting screen (it says IDEOS), it stays there for a while and then it just goes black and boots itself again.
Is there any way to fix this issue?
What do you mean by a honeycomb rom? You need CM7, MIUI or Oxygen for your phone which are all gingerbread based and available in the development section of this forum. Honeycomb is for tablets only.
What phone do you have? a regular u8800 or a u8800pro?
Which recovery do you have?
What does the recovery do when you select restore from backup?
Lastly, does the recovery see anything else on the sd card?
PaulMilbank said:
What do you mean by a honeycomb rom? You need CM7, MIUI or Oxygen for your phone which are all gingerbread based and available in the development section of this forum. Honeycomb is for tablets only.
What phone do you have? a regular u8800 or a u8800pro?
Which recovery do you have?
What does the recovery do when you select restore from backup?
Lastly, does the recovery see anything else on the sd card?
Click to expand...
Click to collapse
Right, I thought I could get Honeycomb, I completely screwed up...
I have a regular u8800, Clockworkmod Recovery 4
When I select restore from backup, it just does exactly what it's supposed to do, at the end it says that the recovery was succesful, but I'm still stuck in bootloop.
Yes, the recovery can see different things on my SD card.
If I downloaded CM7, put it on my SD card, and then installed it via CWM, would it work?
Oh and is there a way to access my SD card without my phone actually being turned on?
If it is an external card, use a sd card reader to put files onto it. If not, get an external card and card reader!
You can try wipe userdata, cache and dalvic cache then restore backup, otherwise I would definitely get hold of CM7 from here:
http://forum.xda-developers.com/showthread.php?t=1068766
Oxygen from here:
http://forum.xda-developers.com/showthread.php?t=1149150
MIUI:
http://forum.xda-developers.com/showthread.php?t=1354680
http://forum.xda-developers.com/showthread.php?t=1362963
Install one of them and hopefully you should be back up and working.
I did try wiping userdata, cache, and dalvik cache, however it still doesn't boot...
I'm going to get an SD card reader later today, but I'm not very optimistic since it doesn't boot even with the backup I had from CWM, so I don't think it'll bot with CM7 or something..
So I figured out what my problem was, I didn't put the .zip file in my phone memory, I put it in an external micro-SD card, because I thought that's what I was supposed to do.. so now I'm pretty much screwed.
Is there any way to make CWM search for the .zip on my external SD, or is there any way to access my phone memory without actually booting it?
Vertikal307 said:
Is there any way to make CWM search for the .zip on my external SD, or is there any way to access my phone memory without actually booting it?
Click to expand...
Click to collapse
Since you have ClockworkMod Recovery, I'll assume your bootloader isn't useless: Download {L,X}Ubuntu and burn it on a CD or make a bootable USB. Boot it and put your phone into the pink screen mode: you'll be able to mount the internal SD card. For me, I find Genokolar's CWM to be weird with the external card: the only time I can get it to see the card is if I boot into Android, unmount the card and then do an "adb reboot bootloader" from my computer
qwerty12 said:
Since you have ClockworkMod Recovery, I'll assume your bootloader isn't useless: Download (L/X)Ubuntu and burn it on a CD or make a bootable USB. Boot it and put your phone into the pink screen mode: you'll be able to mount the internal SD card. For me, I find Genokolar's CWM to be weird with the external card: the only time I can get it to see the card is if I boot into Android, unmount the card and then do a "adb reboot bootloader" from my computer
Click to expand...
Click to collapse
I'm going to try this, currently downloading Ubuntu, although I've never used it before, so I'm really scared of just messing everything up.
Thank you SO much guys, especially qwerty12.
I installed Ubuntu and put the CM7 .zip file on my internal memory, and succesfully installed CM7, now my phone booted normally, and I have CM7 installed!
Great stuff,glad you got it sorted
After a battery empty, I restarted my Defy+. But now it got stuck on "Starting apps." at the end of the boot.
I have to wipe data to make my phone ending the boot.
If I restore data which I previously backup in recovery mode, I'm still stucked with "Starting apps."
How can I debug the settings or data that avoid that? I really want to restore my data.
ronpub said:
After a battery empty, I restarted my Defy+. But now it got stuck on "Starting apps." at the end of the boot.
I have to wipe data to make my phone ending the boot.
If I restore data which I previously backup in recovery mode, I'm still stucked with "Starting apps."
How can I debug the settings or data that avoid that? I really want to restore my data.
Click to expand...
Click to collapse
Are you using the new Teamwin recvoery to flash?
Ive had the same issue ( and many more besides that) for me, to fix the problem i did this:
Go back to recovery (Teamwin) and wipe everything
re-boot, go back to recovery (team win) and flash an older rom with clock work mod recovery, and let it boot.
re- start the phone and then go back to recovery ( clockwork mod) and flash the newer CM10 rom from clcokwork mod (First wipe everything /data/dalvik/cache/factory re-set)
2Pints said:
Are you using the new Teamwin recvoery to flash?
Ive had the same issue ( and many more besides that) for me, to fix the problem i did this:
Go back to recovery (Teamwin) and wipe everything
re-boot, go back to recovery (team win) and flash an older rom with clock work mod recovery, and let it boot.
re- start the phone and then go back to recovery ( clockwork mod) and flash the newer CM10 rom from clcokwork mod (First wipe everything /data/dalvik/cache/factory re-set)
Click to expand...
Click to collapse
Thanx,
Yes Teamwin delivered with cm-10-20130527.
What I done without success:
*Flash older ROM and restore more older data with CWM
*Push with adb unzipped
I should have flashed 10 to 20 times changing some steps each time. Each time I done wipe cache, dalvik and sometimes a data format and a wipe system.
I abandoned the idea to restore my data. Have to reenter all settings manually (find and enter account settings for CSip or some solooong preshared key for Vpncilla and so on).
Then what is positive: I format my data partition to ext4. I learnt a lot from very fragmented information for all those steps. I have a fresh new install.
ronpub said:
Thanx,
Yes Teamwin delivered with cm-10-20130527.
What I done without success:
*Flash older ROM and restore more older data with CWM
*Push with adb unzipped
I should have flashed 10 to 20 times changing some steps each time. Each time I done wipe cache, dalvik and sometimes a data format and a wipe system.
I abandoned the idea to restore my data. Have to reenter all settings manually (find and enter account settings for CSip or some solooong preshared key for Vpncilla and so on).
Then what is positive: I format my data partition to ext4. I learnt a lot from very fragmented information for all those steps. I have a fresh new install.
Click to expand...
Click to collapse
You can use Nandroid Manager to use ur data while the phone is booted, so install it, it will find ur backup, and the u can do a restore of ur apps, with data.
hackergnome said:
You can use Nandroid Manager to use ur data while the phone is booted, so install it, it will find ur backup, and the u can do a restore of ur apps, with data.
Click to expand...
Click to collapse
"Nandroid Manager currently supports nandroid backups created by TWRP and Clockworkmod (v5.xx and v6.xx) based recoveries! ".
Very nice app then. Thank you too late. I immediately install it.
My friend has a Defy, and I have tried to install Kitkat to it. I was almost successful, but gapps dont go it, and booting is very-very slow.
I figured it out that there is a recovery error: cant mount /cache, and cant format is. I think cache is needed to boot faster.
And I cant to install any aps because "no internal memory space available"
I made a full wipe before install, format sd, system, data... etc.
When kitkat boots, statusbar is OK, quickbar OK, so i can enter Settings, do connect wifi, bluetooth, etc, but I have no launcher. Internal memory seems to be 68MB (defy has 2GB i think).
After restart, all changes lost.
Do u have any idea to re-create /cache partition (i have TWRP) and make internal SD visible to OS?
Thank u in advance
Which gapps did you install? You need the minimal version of BaNkS gapps.
I installed the minimal.
Did you try to wipe, install only ROM first, boot the device, and then reboot in TWRP and install lastest minimal Gapps?
Sure.
I installed back CM 7.2, it works perfectly
Hi,
I have installed Ultra Gb revolutionary 1.6 Rom and have been using it for a while. I wanted to remove all content on phone..so i tried to wipe data and reinstall the rom again. Rom flashed correctly and i rebooted the phone..but user apps were not removed, they are still on the phone.
I tried changing kernel, flash another rom, flashed utra gb again, the apps are still there, why?
You can try to conenct your sdcard to your PC and delete .android_secure, it contains sd apps that don't get deleted with /data
If it doesn't work you can use Wipe data option in settings :good:
Killnolife said:
You can try to conenct your sdcard to your PC and delete .android_secure, it contains sd apps that don't get deleted with /data
If it doesn't work you can use Wipe data option in settings :good:
Click to expand...
Click to collapse
Thanks for your reply, i tried all of those, but its still there
marcusflint said:
Hi,
I have installed Ultra Gb revolutionary 1.6 Rom and have been using it for a while. I wanted to remove all content on phone..so i tried to wipe data and reinstall the rom again. Rom flashed correctly and i rebooted the phone..but user apps were not removed, they are still on the phone.
I tried changing kernel, flash another rom, flashed utra gb again, the apps are still there, why?
Click to expand...
Click to collapse
Well, that may be a kernel issue! Try to install stock kernel/ROM via odin and get it all clean!
lionelsuyog said:
Well, that may be a kernel issue! Try to install stock kernel/ROM via odin and get it all clean!
Click to expand...
Click to collapse
I think that's not the kernel, he said he tried to change it, i think he haves a problem because /data is not mounted,
OP use CWM and mount /data, then do wipe data & cache
Killnolife said:
I think that's not the kernel, he said he tried to change it, i think he haves a problem because /data is not mounted,
OP use CWM and mount /data, then do wipe data & cache
Click to expand...
Click to collapse
While selecting Factory reset on cwm, data & cache are automatically mounted and both data, cache and .andtoid_secure is wiped! I'm jst sharing my experience, it happened with me few times while using percy_g2 kernel! The best option for me was odin!
In CWM in general partition is mounted when wiped, I think switching kernel and try again
Flash another CM kernel and wipe data then return to your kernel, or do a factory reset from setting in phone
Try to use odin. Your userdata.img may be Corrupted
Press Thanks if Helped
Well a simple solution to the problem :
1.Go to CWM,mount all the partitions and flash percy's kernel (CyanogenMod #2)
2.Go back and then go to advanced > reboot recovery
3.Now you'll be in Percy's recovery and from there,under mounts and storage,format data and format cache.
4.Go back and then go to mounts and storage and mount all the partitions.
5.Flash back to bieltv.3's kernel and reboot.
Finally, i had to flash flash stock Rom via Odin and go back to ultra gb.. Thanks for all the help guys