Hi everyone I am very new at all of this, but I have a problem. I was updating my xv 6800 titan with the windows mobile 6.1 update from verizon and i accidentally unplugged the usb cable and now i have the rgb screen that says TITA100
SPL-2.07.008
CPLD-9
and ruunbh in the top right hand corner and it does not connect to active sync or anything is there anyway i can fix my phone? thank you very much
Have you tried to run the update again with it connected? That screen is the bootloader screen. You might check to see if someone made a NBH file for the VZW update. You can usually put that on a SD card and if it is named correctly the bootloader will install that ROM file.
i have a file called RUU_TITAN_VZW_WWE_3.57.605.1_RS_TITAN_3.37.75_OM_VZW_Ship is that the file i need?
U can take that file, extracts the contents to a folder using WinRAR, and then run the Rom Update utility. It'll be an exe, maybe RUU.exe. I forget right now. But If you're phone is in the tri-color screen and connected to your PC it should work.
I have a HTC ELF 0300 it is stucking in the tri colour screen with the following
IPL: 2.26.0002
SPL:2.28.0000
i have followed the advice i found on this forum of flashing the ROM but when i try the rom update utility it comes up with error 270 about the image also i tried the mtty process but it wont open the usb port
i tried flashing the SD Card but it then says "Invalid Certificate"
i'm a total loss and totally stuck..
any help appricated
Have you really read this sticky thread http://forum.xda-developers.com/showthread.php?t=406721 before flashing ?
Have you used "search" function with f.e. "stuck in bootloader" before posting ?
If not, please do and you'll find very useful solutions
i have read the theads over and over again and finally worked out mtty and worked out my phone is
elf0300
tmob050
it's still in tri colour mode yet i cant find a rom for it...
i tried the nbh file flashing to the memory card
but no luck....
heelllp
Do you know if you have Elf or Elfin?
It is essential for flashing original Rom Elf: http://forum.xda-developers.com/showpost.php?p=2045325&postcount=2
Elfin: http://forum.xda-developers.com/showpost.php?p=2045051&postcount=1
i haave an elf (p3450) well thats what it says on my box
i cant find the orginal rom for this and i'm totally stuck
any help is greatrully recived
also i have tried CID unlocking it so i can put custom roms on it but my computer wont active sync when the phone is connected through the USB port...
Also, what did you do to get your phone stuck in bootloader in the first place?
my brother did it to my phone before i'd even had chance to use it , and i don't know what he did.....sorry x
Try this and follow the instructions exactly http://forum.xda-developers.com/showthread.php?t=347700 and report pls
i tried this yesterday at first when i pressed enter i didnt get >cmd (which is what happening now)
then when i do get it eventually after many tries it sasys
cmd55 or something failed
and stays on 0% on a gray screen
sorry if i sound stupiud.
Ok
First you connect your device, then right click on active sync icon on your computer, chose connection settings and change according to the instructions then continue with mtty.exe
i have done this
when i press enter i dont get anything come up....
yesterday i managed to get it up though and just stayed gray screen at 0%
Try again a few times making sure you didn't overlook any detail.
I just found this http://forum.xda-developers.com/showpost.php?p=3395787&postcount=155 possibly mtty version doesn't work
2- Another possibility is unbricker rom http://forum.xda-developers.com/showthread.php?t=446242
3- gold card method (the links are dead so you should pm Dsixda)
Flash from the SD card:
ELF0IMG.nbh on a FAT32 filesystem, complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
1. Format microSD card from your computer.
2. Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.
3. Rename the .NBH file to ELF0IMG.nbh and copy it to the root folder of your microSD card.
4. With microSD card inserted in the phone, start the bootloader (the bootloader is invoked by hold down the camera button and reset device with the stylus).
5. Confirm flashing on screen by pressing the power button (or the volume slider down).
6. Flashing might hang after some time but this is normal. Just wait.
Will try now and keep u updated
manny thanks x
Follow the instructions until you get cmd only, then return to the tutorial to continue
Good luck
Just an update
i downloaded the nbh file you sugested and tried both
1) flashing from the SD card by renaming file - when i do this is says checking sd contents then goes back to my bootlooder screen
2) running the romupdateutility.exe with the nbh file in the same folder it goes through then i get error 294 incorrect vender
i am unable to pm Dsixda about the gold card
i have no idea what else to try
ps: when running mtty i still get a gray screen then the bootloader screen.
Sorry to hear this, I'm out of ideas. Just some details not to miss:
try a hard reset
writing "ELF0IMG.nbh" (elf zero img and not elf o img)
google for mtty and download a few versions
Wait for an answer from Dsixda for gold card if you can't find your original rom
Creating your GoldCard
I don't remember well the procedure but you can try the following:
If you have access to a working pda or a working GPS device - PNA which is powered by WM (even modified) then you have to follow these steps:
Download this package and save it in your C:\ drive.
Run it.
(it will extract all the necessary files in C:\itsutilsbin (folder) and it will start the setup of Perl)
When the Perl - installation is finished run Perl Package Manager from Windows Start Menu.
Add repositories.
Name: itsme
Location: http://www.xs4all.nl/~itsme/projects/perl/ppm
Name: theoryx
Location: http://theoryx5.uwinnipeg.ca/ppms/package.xml
(HowTo: run Preferences from the Perl Package Manager menu and switch to the repository tab)
After database synchronization install these packages:
Crypt-DES
XdaDevelopers-NbfUtils
(HowTo: at the main window of Perl Package manager find those packages, mark them for install (the icon with green plus, next to the search bar) and run marked action(green arrow icon))
Format the sd card(FAT32) and insert it in a working pda.
Connect the working pda to the pc , wait to sync and run psdread.bat from C:\itsutilsbin.
Find an official rom from here with a ModelID which matches your device's one
Example: If your pda is an Elfin and you have ModelID ELF030000 then get the below rom from that thread.
RUU_Elfin_TMO_NL_2.26.114.52_4.1.13.52_03.08.90_BL UE_Ship.exe (T-MOBILE)
Device: ELF030000
CID: T-MOB003
Version: 2.26.114.3
Language: NLD
Click to expand...
Click to collapse
Extract the RUU_Signed.nbh, rename it to ELF0IMG.nbh and copy it to the sd card.
Fully charge your battery, insert the sd card to your pda, enter bootloader and flash from memory card
(Confirm flashing on screen by pressing the power button (or the volume down button)).
If everything went ok then you can use a HardSPL or a USPL to CID Unlock your phone and update the rom with one of your choice.
If you don't have a working pda use a card reader - Ubuntu (even from a LiveCD) and QMAT are required
Regards!
i don't have a working pda to use :-( the only pda i have is my bricked one :-(
buncie2010 said:
i don't have a working pda to use :-( the only pda i have is my bricked one :-(
Click to expand...
Click to collapse
There is a way to use a card reader instead.
Using Ubuntu LiveCD and QMAT
ps:I wonder how did the wiki entry got erased?
Dsixda and all the members who worked on this had done a great job and it's really annoying that all their work was lost.
I downloaded the android build [BUILD]UPD(27.11.2010)MCCM SE V3.4(FroyoStone Sense)[kernel hastarin r8.5] I just wanted to know how to get this thing to dualboot up? Any help would be appreciated?
search for JMZ dual boot. install it to the phone in windows, its a cab file. reset the HD2 and it should boot to an option screen saying Android on top and windows on bottom.
Cheers...
OK, I downloaded that file to my computer, but I need help with getting it on my phone from windows mode??? Can someone help me with that plz?
Ok got the files on my phones HD still wont dual boot? Do I need to put the files in a certain folder?
Just download one of the roms from the android developement thread, copy the android to the root of the sd card.
Then use jmz dual boot,should work
You have copied the JMZ cab file to your phone , but have you installe it? just use file explorer to file cab file and click on it to install. then reboot.
Ok so I got the boot loader installed, I get the dual boot screen but cant do anything with it and it ends up loading windows. I am a noob ath this, can someone help me with the issue?
ok I got it but now when the screen comes up with android and windows the time out runs backwords -1, -2, -3 and so on...... What is up?
Hey People,
some Informations about the Phone:
HTC HD2 T-Mobile
ROM : 3.14.111.1
Radio : 2.15.50.14
WM 6.5
And here what I've done:
I started with installing HSPL 2.08 ->success (checked it in Bootloader)
Next I installed Exceller Bootloader, seems to work also fine.
Then I unpacked the ICS data to an new Folder named ICS and copied this to the root of my SD-Card.
After that I unplugged the HD2 from PC and restarted it. I moved to the ICS folder in explorer, started CLRCAD, waited a moment and started then haret.exe.
The Problem:
HTC Screen appeared and after 5-10 seconds the phone reboots and Windows starts again. It's the same if I'd try with Exceller Bootloader.
I already tried to find a solution in the Forum and in some Guides but I didn't...
So has anyone an Idea what to do to start Android?
Btw: The data.img size in the File startup text changed after first try of starting android from 512 to 256.
I used this guide to install: http://forum.xda-developers.com/showthread.php?t=881958
Thanks, Novarto
....................................
Hi, I can't post directly into the existing thread (Noob), but I've tried Android Flasher 2.2.0.5 and it gives the old "Android Flasher has encountered a problem and needs to close" Microsoft warning. I'm happy to pay for the Pro version, but need to know it will run first.
I'm running WinXP SP3, and have a HTC Desire, rooted with Unrevoked 3. FYI, I could get Android AIO Flasher to start, and communicate with the phone, but it crashes when I try and convert pics to IMG. As I only want to change the splash screen, I thought AF would be the solution.
Anyone else hit this snag?
It'd be nice if I could just message the author
Thanks, Rod. ..... Nope, no quotes here.....
http://forum.xda-developers.com/showthread.php?t=405118
u could try this for changing splash screens. basicaly it converts bmp files to nb. and once its converted u just rename nb to .img and u can flash via fastboot commands.
http://androidforums.com/desire-all...under-rooting-android-errata.html#post2991455
thats a wee TUT on how to use it.
also u can use almost any free online image editor to convert jpg, png files etc etc to bmp format. this is just another way around changing splash screens
thanks handy5876 for this
Sent from my HTC Desire