Wifi not offered during initial phone setup

Wifi not offered during initial phone setup - Nexus S General

Hi,
what made me happy after I first installed 4.0.3 was that before first login (you know, the part after flash/factory reset when android wants to know your language, username, password and stuff) I was offered to set up a wireless connection to run the setup process through. It happened couple of times after several flashes and then it stopped. Now not even the new 4.0.4 offers me to setup wifi at the beginning. As I have spent my FUP its kinda PITA to wait some 10-15 minutes after flash. And when I choose the option to skip username/password and enter that later, it wont sync my apps ...
Any hints pleas?

Tried pressing menu button?
Sent from my ice cream powered Nexus S

DarkhShadow said:
Tried pressing menu button?
Sent from my ice cream powered Nexus S
Click to expand...
Click to collapse
Nope, as this "wifi request" used to start up by itself in ICS ... if it works also this way, then thank you! Will try during next reinstall ...

Pull the sim card prior. Or go somewhere that you get no service.
I find that if I do a fresh install/wipe and I am in a area where my cell service sucks(no signal) it will ask for wifi. If there is cell service it does not and uses cellular.

It will only automatically give you the option if you don't have a signal. So if you go through the setup real quick before it gets a signal you would get the wifi setup. But if you have a newer radio it probably is getting the signal faster.

Related

android market terms of service problem

Hello, i finally got my Hero. loaded a new ROM onto it and rooted it, but i´m having some trouble with the market app. whenever i try to open it it just says loading "android market terms of service" and stays there forever, the only choice is to wait longer og choose decline.
I´ve triyed both on wifi and gprs connection, and every other application on the phone can use both connections to browse and so on.just not android market..
Here is a little infor about the phone to help you figur my problem out.
ROM: update-hero-modacocustomrom-1.1-signed
Firmware version: 1.5
Baseband Version: 63.18.55.06U_6.35.04.25
Kernel version: 2.6.27-a550404199 [email protected] #521
Build number: 1.79.482.3 14733 CL#49365 release keys
Software version 1.0.0.A6288
Hope some kind soul is willing to help me out, thank you in advance.

I just put 1.1 on my Hero a few hours ago, and Market is still working fine for me. i did update the radio first though; you might want to try that.
otherwise, it could just be Market playing up, not at all unusual in my experience...

Updated the radio to this version, "update-hero-radio-63.18.55.06_6.35.05.15-signed" still no luck getting allowed to accept the terms of service, but i seems that the phone now has better signal strenght to the phone net.
After apoximitly 5 minutes i get a window instead of the loading screen where is says "Attention. An error has occured. Please try again later."

this sounds similar to teh connection errors that people are experiencing when they skip the sign in process during the initial set up. In general,m the only solution to that is to hard reset and sign in to google at the very first opportunity, during the set up screens and before you ever see the touchflo homescreen.
of course, it could just be a proxy in the APN settings.....

Year, i had that problem on the first time i changed the ROM, on that occasion i skipped the google account setup, and couldn´t use any program the used the internet.
But on this install i did do the sign in on first boot, and every program other that market that uses the internet or GPRS is working (weather, browser, mail, stock´s and so on)
Only thing that won´t start is the market tearms of service.

I had the exact same problem.
You need to contact your service provider and get the APN settings for your provider. After you have entered them in connect to marketplace over 3G and you should be fine.
My problem was caused by my phone company, Chess.no, shipping the unit with APN settings for Netcom! Obviously with a Chess sim inside the phone had some connectivity problems. Once the Chess APN settings were in I got connected straight away.

are you using wifi or 3g? I heard that market likes to make it's initial connection over 3G....
sadly i have a locked t-mobile G2 so i don't have any of these problems, i just sign in and it is automatically set up for me over 3G.

Arctic Matt was spot on, there was no APN profile in the phone, just made one with a name. after that it worked instantly.
Thanks alot.

Thanks for listening
I cannot believe that Scandinavian mobile providers, with their lazy ass coffee drinking cake eating lifestyle, have failed to notice this problem. If you look around on other forums (Google, Chess, Netcom) there are tons of people with this shortfall. I am so sick of this constant crap in Norway that I am moving my entire family over to Canada! In Norway, the technology is there and people want it but the companies providing it are infested by tech thick 50 year old management morons who are incapable of overseeing projects.
Just imagine if you were not a member of xda devs and have just got this phone as an average Joe. No apps! No help! ...and they wonder why people hack the phones to hell.
Glad I could help.

Sorry to dig up an old thread but I've got the exact same problem and have tried everything listed here. I had this issue on my LG Optimus One running Froyo, I flashed with a new ROM and still have the same problem.
I tried:
1. Master Reset through the phone (3 times!)
2. Entering APN and connecting via the mobile network before using WiFi (also tried WiFi first before using mobile network, no difference).
3. Signing in through the YouTube App and ensuring sync was on, yes that works, and I can see my Gmail, but still can't sign into the Market.
After (3), each time I try to open the Market I get " An error has occurred. Please try again later." and the Market just exits.
Anyone have any other solutions which might work??

cyberdog100 said:
Sorry to dig up an old thread but I've got the exact same problem and have tried everything listed here. I had this issue on my LG Optimus One running Froyo, I flashed with a new ROM and still have the same problem.
I tried:
1. Master Reset through the phone (3 times!)
2. Entering APN and connecting via the mobile network before using WiFi (also tried WiFi first before using mobile network, no difference).
3. Signing in through the YouTube App and ensuring sync was on, yes that works, and I can see my Gmail, but still can't sign into the Market.
After (3), each time I try to open the Market I get " An error has occurred. Please try again later." and the Market just exits.
Anyone have any other solutions which might work??
Click to expand...
Click to collapse
Sometimes your provider will block your connection to market, until you verify that you are over 18 (as a child proofing method) etc.. (even on wifi, somehow)
at least that was a problem with someone I knew.. .. I assume master reset would clear market data and cache?

nijnvy said:
Sometimes your provider will block your connection to market, until you verify that you are over 18 (as a child proofing method) etc.. (even on wifi, somehow)
at least that was a problem with someone I knew.. .. I assume master reset would clear market data and cache?
Click to expand...
Click to collapse
I don't think that's my issue, I've used my SIM as well as many other SIMs in other Android phones to access the market, it just seems to be an issue with this particular handset, oh well its weird!

Did you find a solution to your problem? I just flashed Android 2.2 to my HD2 and have a similar problem, only android market wont work.
Thanks!

pogoetic said:
Did you find a solution to your problem? I just flashed Android 2.2 to my HD2 and have a similar problem, only android market wont work.
Thanks!
Click to expand...
Click to collapse
I am having this same error as well.

Okay so i had to download an app called MoreLocale2 and force the locale to English(United States) and hard reset the phone. Worked fine after that. Hope it helps!

Android market just works here if google talks is enabled and connected...

Problem =[

Ok, so I un-rooted my phone yesterday, and now I'm stuck. Before I go on I haven't paid my bill this month, and T-Mobile disconnected my 3G connection onto I pay my bill, but I'm stuck on my "Google Start-up", and every time I put my email and password in it doesn't connect.
Is there a way to skip this setup so I can use my WiFi connection on the phone?
Thank you.

Jay_8698 said:
Ok, so I un-rooted my phone yesterday, and now I'm stuck. Before I go on I haven't paid my bill this month, and T-Mobile disconnected my 3G connection onto I pay my bill, but I'm stuck on my "Google Start-up", and every time I put my email and password in it doesn't connect.
Is there a way to skip this setup so I can use my WiFi connection on the phone?
Thank you.
Click to expand...
Click to collapse
just press the Skip button at every screen till u get the normal homescreen, then go to settings and enable your WiFi and connect ur WiFI and try to start up Market then it will ask u to sign in your google Account and your done

That's the problem. I can't skip at the "Create Account"/"Sign in" page.

Jay_8698 said:
That's the problem. I can't skip at the "Create Account"/"Sign in" page.
Click to expand...
Click to collapse
thats because you unrooted, only the dev builds and custom builds allow you to skip google sign in. you will need to borrow a sim card that has android feature.

sell, if you have a myTouch, than the answer is here:
http://forum.xda-developers.com/showthread.php?t=588017
Checked it on my phone, it works.

I do have a myTouch, but I just tried it on MT3G and it doesn't seem to work for me. I'll keep checking though. Thanks for the link.

WARNING! Do not update to 8.1 if your phone is CDMA

HTC 8X/8S
HUAWEI W1
Confirmed brick after 8.1 developer update with CDMA network.
Lumia 822 Verizon
Confirmed no problem if you use GSM/WCDMA.
If you have already bricked your phone, try this:
1.Power down phone by pressing Power button.
2.Press Power button and Volume +/- button at the same time, phone will go to flash mode.
3.Press Camera button for 5 seconds to power off your phone.
4.insert a GSM/WCDMA SIM card in your phone and turn on phone.
It seems that 8.1 not compatible with CDMA SIM card.

reker said:
HTC 8X/8S
HUAWEI W1
Confirmed brick after 8.1 developer update with CDMA network.
Lumia 822 Verizon
Confirmed no problem if you use GSM/WCDMA.
If you have already bricked your phone, try this:
1.Power down phone by pressing Power button.
2.Press Power button and Volume +/- button at the same time, phone will go to flash mode.
3.Press Camera button for 5 seconds to power off your phone.
4.insert a GSM/WCDMA SIM card in your phone and turn on phone.
It seems that 8.1 not compatible with CDMA SIM card.
Click to expand...
Click to collapse
I have it on my htc 8xt and its working fine. Well I am having lockscreen issues but the network is working fine for me on sprint.

starsoccer9 said:
I have it on my htc 8xt and its working fine. Well I am having lockscreen issues but the network is working fine for me on sprint.
Click to expand...
Click to collapse
the problem with me no wifi
no mobile data

That is so far from something you could call a "brick" it's not funny. "Brick" means un-recoverable. If you can "un-brick" something without diassembling it or at least using hardware a normal user couldn't have access to, it's not a brick!
Also, has anybody else actually had this problem? A few people seem to indicate that they have *not*...

No problems what-so-ever updating and running on my Odyssey...other than taking forever to download and install.

Working fine in my Lumia Icon from Verizon.

No cellular data after hard reset
I by no means have a brick, but I do now have an issue. Here’s what happened.
I have a Sprint ATIV S Neo, GDR3, Interop-unlock, the whole deal.
Installed the 8.1 update yesterday, and everything was working. I have been playing with all kinds of “stuff” in the registry and such, so I decided that since I had just installed 8.1 I would start fresh and do a hard reset. I don’t really care about keeping interop-unlock at this point. Even with it, so much is still locked down. I’m sure in the future someone will get this cracked and we can really have fun, but until then, just being developer unlocked is good enough.
So, when I got home I reset the phone (power+volume down, exclamation point, then the remaining sequence).
Phone boots back up, and I connect to my WiFi and set everything back up. I think life is wonderful at this point. Then decide to test my 4G download speed so I turn off wifi.
Oops, no cellular data, phone calls and text are fine (didn’t try mms, but probably doesn’t work, blank url in the provisioning). Tried all the usual tricks (##72786# and such). I have my msl, so I go into the provisioning, and things look messed up. My MDN and MSID are 000003872. That makes no sense, so I set them back to the correct values and still no go.
Called Sprint. They ran me through all the usual things that I had already done (hour on the phone with them).
Long story short: The activation program seems to be missing from my phone. Hands free activation never tries to start, in fact, after hard resetting again and watching closely, during setup it says “Activate your device can’t be opened”. And the network settings are missing from the settings menu.
So after work I’m going to take it to Sprint and hopefully they have a factory image they can flash (hopefully an older version so I can update things myself).
My thinking is that the 8.1 update is basically the new rom, but during install doesn't delete the existing carrier programs. When I hard reset, all that got re-installed was the strictly Microsoft stuff, not the carrier specific items i.e. hands free activation.
PS Sorry about the novel...

GoodDayToDie said:
That is so far from something you could call a "brick" it's not funny. "Brick" means un-recoverable. If you can "un-brick" something without diassembling it or at least using hardware a normal user couldn't have access to, it's not a brick!
Also, has anybody else actually had this problem? A few people seem to indicate that they have *not*...
Click to expand...
Click to collapse
HTC confirmed this yesterday, they awared the problem and contacting with MS. Announcement by HTC China
The problem covered both HTC 8s(A620D) and 8x(C620d)
8X/8S have similar but more serious problem with gdr1 - gdr2 upgrade last year, even can't boot into SPL.
By the way, to normal users, if their phone turn into black screen and can't boot, it's a brick. No one will care about if it's a real brick, what they know is: I can't use my phone, it's not working, just like a brick.

fgr said:
I by no means have a brick, but I do now have an issue. Here’s what happened.
I have a Sprint ATIV S Neo, GDR3, Interop-unlock, the whole deal.
Installed the 8.1 update yesterday, and everything was working. I have been playing with all kinds of “stuff” in the registry and such, so I decided that since I had just installed 8.1 I would start fresh and do a hard reset. I don’t really care about keeping interop-unlock at this point. Even with it, so much is still locked down. I’m sure in the future someone will get this cracked and we can really have fun, but until then, just being developer unlocked is good enough.
So, when I got home I reset the phone (power+volume down, exclamation point, then the remaining sequence).
Phone boots back up, and I connect to my WiFi and set everything back up. I think life is wonderful at this point. Then decide to test my 4G download speed so I turn off wifi.
Oops, no cellular data, phone calls and text are fine (didn’t try mms, but probably doesn’t work, blank url in the provisioning). Tried all the usual tricks (##72786# and such). I have my msl, so I go into the provisioning, and things look messed up. My MDN and MSID are 000003872. That makes no sense, so I set them back to the correct values and still no go.
Called Sprint. They ran me through all the usual things that I had already done (hour on the phone with them).
Long story short: The activation program seems to be missing from my phone. Hands free activation never tries to start, in fact, after hard resetting again and watching closely, during setup it says “Activate your device can’t be opened”. And the network settings are missing from the settings menu.
So after work I’m going to take it to Sprint and hopefully they have a factory image they can flash (hopefully an older version so I can update things myself).
My thinking is that the 8.1 update is basically the new rom, but during install doesn't delete the existing carrier programs. When I hard reset, all that got re-installed was the strictly Microsoft stuff, not the carrier specific items i.e. hands free activation.
PS Sorry about the novel...
Click to expand...
Click to collapse
No need to apologize for the novel! I did the SAME exact thing as you (except I hard resetted via settings > about > more info > reset your phone). Luckily I know my MSL, and have my MSID handy. I wiped my settings by doing ##72786# and selecting ok twice. I rebooted my phone manually and then went to the 'activate my device' app in settings. It did what looked like a profile update and it said my phone was successfully activated with my phone number listed.
I can browse the web on Sprint's network, make/receive calls and send/receive texts. The only thing I can't figure out to fix is MMS. I can't get or send picture mail, group texts or any kind of MMS at all.
I've managed to get my coworkers settings from his ATIV S Neo but I can't figure out how to edit them on my phone. Going into ##3282# doesn't let me edit things that deeply.
From what I've heard on other forums is that we're basically SOL unless Sprint releases their firmware updates and their release of 8.1 soon (which they have confirmed they will do this summer).
I figured from the get go when this started yesterday that this 8.1 release doesn't seem to properly support CDMA and judging by how many people have this issue, I was correct. Microsoft really needs to work better on the CDMA side of things.

fgr said:
I by no means have a brick, but I do now have an issue. Here’s what happened.
I have a Sprint ATIV S Neo, GDR3, Interop-unlock, the whole deal.
Installed the 8.1 update yesterday, and everything was working. I have been playing with all kinds of “stuff” in the registry and such, so I decided that since I had just installed 8.1 I would start fresh and do a hard reset. I don’t really care about keeping interop-unlock at this point. Even with it, so much is still locked down. I’m sure in the future someone will get this cracked and we can really have fun, but until then, just being developer unlocked is good enough.
So, when I got home I reset the phone (power+volume down, exclamation point, then the remaining sequence).
Phone boots back up, and I connect to my WiFi and set everything back up. I think life is wonderful at this point. Then decide to test my 4G download speed so I turn off wifi.
Oops, no cellular data, phone calls and text are fine (didn’t try mms, but probably doesn’t work, blank url in the provisioning). Tried all the usual tricks (##72786# and such). I have my msl, so I go into the provisioning, and things look messed up. My MDN and MSID are 000003872. That makes no sense, so I set them back to the correct values and still no go.
Called Sprint. They ran me through all the usual things that I had already done (hour on the phone with them).
Long story short: The activation program seems to be missing from my phone. Hands free activation never tries to start, in fact, after hard resetting again and watching closely, during setup it says “Activate your device can’t be opened”. And the network settings are missing from the settings menu.
So after work I’m going to take it to Sprint and hopefully they have a factory image they can flash (hopefully an older version so I can update things myself).
My thinking is that the 8.1 update is basically the new rom, but during install doesn't delete the existing carrier programs. When I hard reset, all that got re-installed was the strictly Microsoft stuff, not the carrier specific items i.e. hands free activation.
PS Sorry about the novel...
Click to expand...
Click to collapse
I saw your reply to my thread for the same issue. I did some research on WP Central and found another thread where someone was having the same issue with an Ativ S and the solution was to manually enter the APN information. I don't know what the APN info is for Sprint, but when I checked it on my phone it was blank. It seems like a safe bet that updating that info would fix the issue.
---------- Post added at 04:01 PM ---------- Previous post was at 03:40 PM ----------
iknowsingh said:
No need to apologize for the novel! I did the SAME exact thing as you (except I hard resetted via settings > about > more info > reset your phone). Luckily I know my MSL, and have my MSID handy. I wiped my settings by doing ##72786# and selecting ok twice. I rebooted my phone manually and then went to the 'activate my device' app in settings. It did what looked like a profile update and it said my phone was successfully activated with my phone number listed.
I can browse the web on Sprint's network, make/receive calls and send/receive texts. The only thing I can't figure out to fix is MMS. I can't get or send picture mail, group texts or any kind of MMS at all.
I've managed to get my coworkers settings from his ATIV S Neo but I can't figure out how to edit them on my phone. Going into ##3282# doesn't let me edit things that deeply.
From what I've heard on other forums is that we're basically SOL unless Sprint releases their firmware updates and their release of 8.1 soon (which they have confirmed they will do this summer).
I figured from the get go when this started yesterday that this 8.1 release doesn't seem to properly support CDMA and judging by how many people have this issue, I was correct. Microsoft really needs to work better on the CDMA side of things.
Click to expand...
Click to collapse
Would you be willing to post the settings? I am guessing that the issue may be partially related to APN settings being missing under Settings, Cellular+SIM, SIM settings. I read a post by someone on another forum who had the same data issues but fixed them by entering the APN information for his carrier. I've tried a couple of different APN settings that I've found out on the web for Sprint, but I'm not sure they are accurate. All I know is that they were missing when I checked them on my phone.

i have fixed my issue with some internet research.
adding manually the APN of the provider in the APN settings solved the issue for me.
hope i helped.

Would you be willing to post the settings? I am guessing that the issue may be partially related to APN settings being missing under Settings, Cellular+SIM, SIM settings. I read a post by someone on another forum who had the same data issues but fixed them by entering the APN information for his carrier. I've tried a couple of different APN settings that I've found out on the web for Sprint, but I'm not sure they are accurate. All I know is that they were missing when I checked them on my phone.
Click to expand...
Click to collapse
I would not mind at all! I went into ##3282# on his phone, selected 'view' then 'others' then 'MMSC URL' . The two pictures are attached, the order of the settings begins with the picture that says '[email protected]'. The second pic is literally a continuation as it starts right where the first picture ends (I scrolled neatly!)
I've been trying to find the correct Sprint APN settings around the web, and a lot of sites have similar settings as options but either Windows Phone doesn't have enough fields for the settings, and the fact that in the APN settings on 8.1, it doesn't let me change the authentication type.
I noted on my coworker's ATIV S Neo that in his 'cellular+SIM' section, he doesn't have options to input APN like I do... the hard reset must've kicked the CDMA stuff in our phones to the curb.

fatdata said:
i have fixed my issue with some internet research.
adding manually the APN of the provider in the APN settings solved the issue for me.
hope i helped.
Click to expand...
Click to collapse
Would you mind posting the APN settings you used? That would be appreciated... I've tried going to various sites but wasn't sure what was the correct ones.

iknowsingh said:
Would you mind posting the APN settings you used? That would be appreciated... I've tried going to various sites but wasn't sure what was the correct ones.
Click to expand...
Click to collapse
they are for greek providrs though... I think you need to find the ones for your provider.
note: i just used the GPRS APN address for wind (my provider) and it worked the rest seemed to not make any diference
VODAFONE
GPRS APN: - internet.vodafone.gr ή webonly.vodafone.gr
Username: - {κενό}
Password: - {κενό}
MCC=202
MNC=05
APN type=default
DNS: - 213.249.17.10, 213.249.17.11
WIND
GPRS APN: - gnet.b-online.gr ή gint.b-online.gr
Username: - {κενό}
Password: - {κενό}
MCC=202
MNC=10
APN type=default
DNS: - 212.152.79.19, 212.152.79.20

fatdata said:
they are for greek providrs though... I think you need to find the ones for your provider.
note: i just used the GPRS APN address and it worked the rest seemed to not make any diference
Click to expand...
Click to collapse
Ahhhh, Vodafone... I assumed you were a Sprint brethren... I appreciate your post nonetheless! Thank you, sir. Now to continue the hunt for correct Sprint settings -_-

Just got back from two Sprint stores and a Best Buy with Samsung reps on hand. None of them had access to any means of reflashing to stock, and really had no useful information. I was surprised by how little they knew about any Windows phones.
I do have TEP though, and they ordered me a new phone. I should have it in a few days. Costing me nothing
Wish I had something useful to tell you folks...

fgr said:
Just got back from two Sprint stores and a Best Buy with Samsung reps on hand. None of them had access to any means of reflashing to stock, and really had no useful information. I was surprised by how little they knew about any Windows phones.
I do have TEP though, and they ordered me a new phone. I should have it in a few days. Costing me nothing
Wish I had something useful to tell you folks...
Click to expand...
Click to collapse
I actually work for a Sprint store (non service/repair location) and I don't have TEP. I actually DO have an upgrade available since I bought the ATIV S Neo off-contract. I wouldn't mind using my upgrade on another ATIV S Neo... and whatever Windows Phones Sprint gets in the future, I'll have to buy off contract (which is nothing new to me lol).
I could technically add TEP to my line and wait a few days then do an advanced exchange at a local repair center but I'll most likely get a refurb as most of them are. I'd rather a brand new device
So I'm currently debating using my upgrade...

fgr said:
Just got back from two Sprint stores and a Best Buy with Samsung reps on hand. None of them had access to any means of reflashing to stock, and really had no useful information. I was surprised by how little they knew about any Windows phones.
I do have TEP though, and they ordered me a new phone. I should have it in a few days. Costing me nothing
Wish I had something useful to tell you folks...
Click to expand...
Click to collapse
Did you mention the update to 8.1 or did you just play dumb? I am thinking I am going to have to do the same thing as you but I don't want to walk in there and tell them that I did the update and have them tell me I'm SOL.

ZogJones said:
Did you mention the update to 8.1 or did you just play dumb? I am thinking I am going to have to do the same thing as you but I don't want to walk in there and tell them that I did the update and have them tell me I'm SOL.
Click to expand...
Click to collapse
I was completely honest, gave them the whole story from start to finish. Even pointed out some of the cool features of 8.1 :laugh:
If this was the new Galaxy they might have given me a hard time, who knows.

[Q] WiFi Troubles?

Ok before I begin with this thread I'd like to say although I'm a new user, I have been on XDA for quite some time. My old account information has been lost.
Basically, my WiFi on my SGS4 I9505 is working when I'm at home, but I can't connect to the one at work. It used to work flawlessly, connected without me clicking the buttons, but now it says "Connecting" then straight back to "Saved"
What have I tried?
- New roms, different Android releases
- Searching forums
- Completely re-flashing the stock firmware via Odin
- Multiple modems via Odin
No matter what I do, I can connect at my home modem but not my work one, all of my work colleges are connected, I've had my friend try connect it (he was the man who introduced me to flashing ect) and he hasn't a clue.
Any advice would be appreciated & the reason I'm creating an entirely new thread is due to the fact my WiFi works at home so it's not just a bug there. Thanks.

irscotty said:
Ok before I begin with this thread I'd like to say although I'm a new user, I have been on XDA for quite some time. My old account information has been lost.
Basically, my WiFi on my SGS4 I9505 is working when I'm at home, but I can't connect to the one at work. It used to work flawlessly, connected without me clicking the buttons, but now it says "Connecting" then straight back to "Saved"
What have I tried?
- New roms, different Android releases
- Searching forums
- Completely re-flashing the stock firmware via Odin
- Multiple modems via Odin
No matter what I do, I can connect at my home modem but not my work one, all of my work colleges are connected, I've had my friend try connect it (he was the man who introduced me to flashing ect) and he hasn't a clue.
Any advice would be appreciated & the reason I'm creating an entirely new thread is due to the fact my WiFi works at home so it's not just a bug there. Thanks.
Click to expand...
Click to collapse
Same exact thing happening to my S4 SPH-L720 (Sprint). Using NegaliteROM 4.4
Tried:
-Re-flashing ROM
-Updating PRL & Profile
-"Forget Network" and re-typed password (confirmed with IT dept password hasn't changed)
- Cleared google account ("Backup and reset" portion) then re-synced after failed login.
And as irscotty stated, wifi works EVERYWHERE else and it just goes straight to "Saved Secured"
Is there a way to reflash the Wifi card to an older Firmware? I don't recall updating it manually, and I believe that is the only way to update it (correct me if i'm wrong). If so, is this even advisable....
Thanks

The only other thing I can think is perhaps the contract provider has cut down the WiFi limitations?
Not sure if that's even possible but every other modem I connect to is just a few feet away, the one at work is perhaps 5-8 metres. But was working 100% prior to this, and the signal strength is saying "Strong" just wont connect

irscotty said:
The only other thing I can think is perhaps the contract provider has cut down the WiFi limitations?
Not sure if that's even possible but every other modem I connect to is just a few feet away, the one at work is perhaps 5-8 metres. But was working 100% prior to this, and the signal strength is saying "Strong" just wont connect
Click to expand...
Click to collapse
Yeah I'm literally 1 yard away from the router. What do you mean by cutting down on limitations? Blocking the amount of mac id's from the router homepage ?

No it has been known in the past for your data providers to cut down your WiFi range to force you into using their data, as opposed to WiFi.
Although to my knowledge, this can only be done through an OTA update on the original software (not custom)

My current solution to this is by changing my Mac address and have successfully logged back in. Seems like was I indeed being blocked. But have no confirmation yet. I use a program called MacChanger (requires root) and hard change my ID when I'm at work. Has been working for a few days now.
Good luck
irscotty said:
No it has been known in the past for your data providers to cut down your WiFi range to force you into using their data, as opposed to WiFi.
Although to my knowledge, this can only be done through an OTA update on the original software (not custom)
Click to expand...
Click to collapse

dis666 said:
My current solution to this is by changing my Mac address and have successfully logged back in. Seems like was I indeed being blocked. But have no confirmation yet. I use a program called MacChanger (requires root) and hard change my ID when I'm at work. Has been working for a few days now.
Good luck
Click to expand...
Click to collapse
Going to try this when I'm at work next, will let you know. Thanks

Wifi, time and root

Hi there,
I'm using CM 12.1, 20150817 version. It's working well, apart from one really annoying thing:
My wifi will not reconnect to networks. Or at least most of the time.
If I set up a new network, it all goes very well, but as soon as I'm out of reach and come back in reach, something goes wrong. My phone sees the wifi network, but doesn't connect. It's in the list of available networks, but just doesn't connect at all. If I manually tell it to connect, nothing happens. The only way to get wifi data again is to tell my phone to forget the network and hook up to it again.
It's not just my home network. It also happens with the work network.
I told it to not avoid bad connections, so that can't be it, besides, the connection is typically very good. Other devices hook up without problems.
Any clues as to what could be going wrong here and how to fix it? My mobile data is going through the roof because of this.
Another thing, less annoying, but probably quite important to the developers is this odd phenomenon:
I traveled to China recently (from Holland) and after I arrived, I set the timezone manually to Chinese time zone. After doing that, time is in sync with local time.
After I did a reset, the phone's clock had shifted on hour back. The local time was off by one hour, and so was the time my phone showed for my home timezone.
I had to manually set the time to the right time, for things to be normal again.
Same happened on the way back, but the other way around. After a reset, the phone's clock was suddenly an hour ahead.
One other thing; somewhere in the last update I managed to loose root privileges. How do I get it back? I would like to give some apps root access.
Cheers,
Menno

Mainow said:
One other thing; somewhere in the last update I managed to loose root privileges. How do I get it back? I would like to give some apps root access.
Cheers,
Menno
Click to expand...
Click to collapse
Hey, Im not too sure about the Time changing problem, but I've found on CM12 that Root Access is disabled by default.
You need to open Developer Settings, Root Access; then change the setting accordingly.
Hope that helps

Mainow said:
Hi there,
I'm using CM 12.1, 20150817 version. It's working well, apart from one really annoying thing:
My wifi will not reconnect to networks. Or at least most of the time.
If I set up a new network, it all goes very well, but as soon as I'm out of reach and come back in reach, something goes wrong. My phone sees the wifi network, but doesn't connect. It's in the list of available networks, but just doesn't connect at all. If I manually tell it to connect, nothing happens. The only way to get wifi data again is to tell my phone to forget the network and hook up to it again.
It's not just my home network. It also happens with the work network.
I told it to not avoid bad connections, so that can't be it, besides, the connection is typically very good. Other devices hook up without problems.
Any clues as to what could be going wrong here and how to fix it? My mobile data is going through the roof because of this.
Another thing, less annoying, but probably quite important to the developers is this odd phenomenon:
I traveled to China recently (from Holland) and after I arrived, I set the timezone manually to Chinese time zone. After doing that, time is in sync with local time.
After I did a reset, the phone's clock had shifted on hour back. The local time was off by one hour, and so was the time my phone showed for my home timezone.
I had to manually set the time to the right time, for things to be normal again.
Same happened on the way back, but the other way around. After a reset, the phone's clock was suddenly an hour ahead.
One other thing; somewhere in the last update I managed to loose root privileges. How do I get it back? I would like to give some apps root access.
Cheers,
Menno
Click to expand...
Click to collapse
Are you running a Lollipop modem? If not, flash a Lollipop modem.

LogicalJunkie549 said:
Hey, Im not too sure about the Time changing problem, but I've found on CM12 that Root Access is disabled by default.
You need to open Developer Settings, Root Access; then change the setting accordingly.
Hope that helps
Click to expand...
Click to collapse
Thanks, but how do I find "Developer Settings"?
I went through the system settings and couldn't find it.
Cheers,
Menno

Lennyz1988 said:
Are you running a Lollipop modem? If not, flash a Lollipop modem.
Click to expand...
Click to collapse
Hi Lenny,
OK, thanks, but how do I find out if I'm running the right modem?
Or where does one find the right modem? I just flashed the files from this thread: http://forum.xda-developers.com/gal...lop/exclusive-antaresone-alucard24-s-t3066696 , using TWRP. I came from the previous version 12.0, but my OTA update had failed, so I did a clean install.
I'm assuming the correct modem would be in the zips?
If not, where can I find it?
Menno

Mainow said:
Thanks, but how do I find "Developer Settings"?
I went through the system settings and couldn't find it.
Cheers,
Menno
Click to expand...
Click to collapse
Oh, go into About Phone, then find Build Number.
You have to tap at this button 7 times in quick succession and it should enable the Developer Settings back in the settings menu.
Be careful messing around in Developer Settings though, some options in here are harmless, but others can really screw with your Android

Database Users

welcome