Database Users

[Q] cm7 question

i just installed cm7 (Mills00013's cdma version) and was wondering if i go to the clockwork mod recovery app that was installed with it, would flashing clockworkmod recovery mess up my phone, or would it work because i heard that cm7 for xplay can use cmw recovery?
thanks in advance

bump
10 chars blah

loismustdie555 said:
i just installed cm7 (Mills00013's cdma version) and was wondering if i go to the clockwork mod recovery app that was installed with it, would flashing clockworkmod recovery mess up my phone, or would it work because i heard that cm7 for xplay can use cmw recovery?
thanks in advance
Click to expand...
Click to collapse
Old thread, but Clockwork red is normally needed to get CM7 or MIUI started, then Clockwork Blue is installed, and you re-install the ZIP for CM7/MIUI full functional. Clockwork just replaces the stock recovery files.

You can't flash clockworkmod recovery. When you open rom manager, you'll notice that there is no available recoveries for our phones. In addition to that, there is no way for the system to flash a recovery if it wanted to because there is no actual recovery partition to overwrite for our devices. The recoveries we are blessed with using now use a kernel modification to allow recovery to boot from the boot partition, which cannot be touched except with fastboot.
Sent from my R800x using XDA App

how to get CWM for Ideapad k1

I've seen some roms posting about cwm but I don't have it. I am rooted running khanning's AOSP rom but i wan to flash the cm10 port. When I go into rom manager it recognizes my ideapad as a Transformer so I can't flash clockworkmod recovery there. Is there another place to download it?

If you're using khanning's AOSP rooted rom you already have cwm recovery.
Read 1st post on that thread and he has explained how to get to cwm recovery.
Don't install any other cwm recovery unless you know and are sure about what you're doing. You might brick your device.

install cwm recovery image for IdeaPad K1
Hetalk said:
If you're using khanning's AOSP rooted rom you already have cwm recovery.
Read 1st post on that thread and he has explained how to get to cwm recovery.
Don't install any other cwm recovery unless you know and are sure about what you're doing. You might brick your device.
Click to expand...
Click to collapse
I think you need to nvflash to install cwm recovery image first, then use khanning's AOSP CMW Rom.
the link posted by khanning for K1_CWM_120109_Rooted_nvflash_R2.zip is no longer working. does anyone have a refresh link?
http://forum.xda-developers.com/showthread.php?t=1564002

heyis4horses said:
I've seen some roms posting about cwm but I don't have it. I am rooted running khanning's AOSP rom but i wan to flash the cm10 port. When I go into rom manager it recognizes my ideapad as a Transformer so I can't flash clockworkmod recovery there. Is there another place to download it?
Click to expand...
Click to collapse
From a terminal session:
su
k1recovery
The K1 will will reboot in recovery with CWM running.

CWM through ROM manager

Hi all,
I saw somewhere that lfashing CWM through ROM manager is unstable.
is this still the case? or can I safely flash CWM from ROM manager and have it stick through reboots?
also, do I need to factory reset when flashing custom recovery for good measure?
(currently I'm rooted with busybox only, stock ROM)
thanks

I'm not sure if it still does a "fake flash" of recovery through Rom Manager (?) The best way to install a recovery is through fastboot.
You could also install TWRP just as easily with the Goo Manager app as an alternative.

ap1618 said:
Hi all,
I saw somewhere that lfashing CWM through ROM manager is unstable.
is this still the case? or can I safely flash CWM from ROM manager and have it stick through reboots?
also, do I need to factory reset when flashing custom recovery for good measure?
(currently I'm rooted with busybox only, stock ROM)
thanks
Click to expand...
Click to collapse
I haven't had any problems installing it through ROM Manager. Installed an update to CWM about a month ago this way and it works fine. Also just reinstalled CWM this way last night after messing around going back to stock and it boots into recovery just fine. I don't flash custom ROM's just do backups and installed su so haven't thoroughly tested it out.

If I have CWM flashed, if I do an OTA update, would I lose recovery? or worse does it cause any conflicts?
thanks

ap1618 said:
If I have CWM flashed, if I do an OTA update, would I lose recovery? or worse does it cause any conflicts?
thanks
Click to expand...
Click to collapse
You won't lose recovery. an ota will not complete without the stock recovery. You'd have to reinstall your stock recovery for an ota to be successful
Sent from my Nexus 4 using xda premium

ap1618 said:
If I have CWM flashed, if I do an OTA update, would I lose recovery? or worse does it cause any conflicts?
thanks
Click to expand...
Click to collapse
It's easy enough to adb sideload an OTA zip via CWM and you have the option to retain root IIRC.
Just search for adb+sideload+OTA.

[Q] Recovery Stock motorola not work

Hi, so i have latest miui V4 2ndboot on my defy. First i have latest CM10 Quarx.
When I change Rom all perfect
but when I try enter to stock recovery my phone stay on moto logo and i pull out battery fot boot phone
For other i can enter to cwm recovery and phone work,
For restore motorola recovery? I flash any zip?
this can cause problems?
Thanks for all
P.S. I have motorola defy MB525 red lense

up

Why you need stock recovery, if you have included 2ndinit in custom roms. 2nd: if you want to restore stock recovery, you'll need to start from scratch...

Gianluca85 said:
Hi, so i have latest miui V4 2ndboot on my defy. First i have latest CM10 Quarx.
When I change Rom all perfect
but when I try enter to stock recovery my phone stay on moto logo and i pull out battery fot boot phone
For other i can enter to cwm recovery and phone work,
For restore motorola recovery? I flash any zip?
this can cause problems?
Thanks for all
P.S. I have motorola defy MB525 red lense
Click to expand...
Click to collapse
stock recovery is available through bootmenu (2nd or 3rd option). So reboot in bootmenu.

pgreed said:
stock recovery is available through bootmenu (2nd or 3rd option). So reboot in bootmenu.
Click to expand...
Click to collapse
when I try, bootmenu -> recovery -> stock recovery stay on motorola logo and i pull off battery

turffe said:
Why you need stock recovery, if you have included 2ndinit in custom roms. 2nd: if you want to restore stock recovery, you'll need to start from scratch...
Click to expand...
Click to collapse
Because when i have cm 10 (2nd-boo) stock recovery work , I try install cm7 official (2nd-init) but i can enter to cwm but stock recovery don't work.
If this not cause problem, I stay whit this rom and work whit cwm recovery
If I want restore recovery? I flash sbf file whit ROM stock?

Gianluca85 said:
when I try, bootmenu -> recovery -> stock recovery stay on motorola logo and i pull off battery
Click to expand...
Click to collapse
In that case you need to start from begining: flash sbf. etc. because I dunno if you find a bootloader.img to flash.

pgreed said:
In that case you need to start from begining: flash sbf. etc. because I dunno if you find a bootloader.img to flash.
Click to expand...
Click to collapse
I have found my bachup of original rom and on this file i find boot img and recovery img?
If I restore this?
I restore original stock recovery?
the cwm recovery remaning?
thanks for all.

you can reinstall custom recovery (which contain stable recovery) through terminal emulator (with an sh script) or restore a img.

pgreed said:
you can reinstall custom recovery (which contain stable recovery) through terminal emulator (with an sh script) or restore a img.
Click to expand...
Click to collapse
if I use 2ndinit.apk and install cwm this restore the stock recovery?
if no i have download sbf rsd lite and ready for all
Thanks for all

Stock recovery disappeared, it's happen sometimes when using custom roms. No clue too.
But it's not even a problem, you don't need stock recovery if you're using custom roms. Custom/stable recovery work it all.
You only need Stock recovery once you want to revert back to stock roms.
When you flash stock SBF successfully Stock recovery will work again! (and let you wipe to gracefully boot into rom.)
So, you plan to return to stock? If not, stop this worries until you planned to.

intemptesta said:
Stock recovery disappeared, it's happen sometimes when using custom roms. No clue too.
But it's not even a problem, you don't need stock recovery if you're using custom roms. Custom/stable recovery work it all.
You only need Stock recovery once you want to revert back to stock roms.
When you flash stock SBF successfully Stock recovery will work again! (and let you wipe to gracefully boot into rom.)
So, you plan to return to stock? If not, stop this worries until you planned to.
Click to expand...
Click to collapse
thanks for all, i asked if this is a problem. only you say me this not a problem. Now I Know the procedure and that happen when flash rom.
For me the tread closed

Help change stock recovery / revert to stock recovery (CWM based recovery) [SOLVED]

Hello friends,
I have rooted Galaxy i9505 international. Installed CWM based recovery 6.0.3.2(0611), and flashed last stable CM (cm-10.2.1-jfltexx).
Boot time have become longer (way longer) since installing CWM based recovery.
Couldn't find a decent post about how to:
1) Revert back to stock recovery.
or
2) Change the CWM based recovery to official CWM.
Anyone know how to do either?
Or maybe had the same problem with CWM based recovery?

Pogromonolith said:
Hello friends,
I have rooted Galaxy i9505 international. Installed CWM based recovery 6.0.3.2(0611), and flashed last stable CM (cm-10.2.1-jfltexx).
Boot time have become longer (way longer) since installing CWM based recovery.
Couldn't find a decent post about how to:
1) Revert back to stock recovery.
or
2) Change the CWM based recovery to official CWM.
Anyone know how to do either?
Or maybe had the same problem with CWM based recovery?
Click to expand...
Click to collapse
Did you consider trying a different recovery (PhilZ) or a different ROM?

Look for a recovery you want to try if its a zip file flash it with CWM and if its odin file flash it with odin.
Pogromonolith said:
Hello friends,
I have rooted Galaxy i9505 international. Installed CWM based recovery 6.0.3.2(0611), and flashed last stable CM (cm-10.2.1-jfltexx).
Boot time have become longer (way longer) since installing CWM based recovery.
Couldn't find a decent post about how to:
1) Revert back to stock recovery.
or
2) Change the CWM based recovery to official CWM.
Anyone know how to do either?
Or maybe had the same problem with CWM based recovery?
Click to expand...
Click to collapse

malybru said:
Did you consider trying a different recovery (PhilZ) or a different ROM?
Click to expand...
Click to collapse
Here's a copy of 1 of philz recoveries you could flash in cwm

malybru said:
Did you consider trying a different recovery (PhilZ) or a different ROM?
Click to expand...
Click to collapse
The latest CM snapshot booted a bit faster.
Actually after all those attempts I can't really remember how long did it take to boot before installing CWM..
But it does seems slower.
terminator1983 said:
Look for a recovery you want to try if its a zip file flash it with CWM and if its odin file flash it with odin.
Click to expand...
Click to collapse
I prefer to flash the original CWM.
How can I flash it on top of the CWM based recovery?
Files there are img files.

Look in xda development section you will find it zip format or i think you can download a zip file of another recovery and the replace the recovery within the zip file with the one you want to flash.
If you want to flash it in .img format you can do that with heimdall but you will need the pit file of 19505 too.
Pogromonolith said:
The latest CM snapshot booted a bit faster.
Actually after all those attempts I can't really remember how long did it take to boot before installing CWM..
But it does seems slower.
I prefer to flash the original CWM.
How can I flash it on top of the CWM based recovery?
Files there are img files.
Click to expand...
Click to collapse

Could not find any ZIP of the official Clockworkmod Recovery.
Is there any other way to install it?
Or better yet, a way to revert to stock recovery (from there I can install as in the beginning)?
Btw, is it ok to just replace recovery? Or should I "uninstall" my old recovery before installing the new one?

Pogromonolith said:
Could not find any ZIP of the official Clockworkmod Recovery.
Is there any other way to install it?
Or better yet, a way to revert to stock recovery (from there I can install as in the beginning)?
Btw, is it ok to just replace recovery? Or should I "uninstall" my old recovery before installing the new one?
Click to expand...
Click to collapse
Here's a Link for either a zip or Odin cwm & just flash it over previous version or flash philz I gave earlier ?

11calcal said:
Here's a Link for either a zip or Odin cwm & just flash it over previous version or flash philz I gave earlier ?
Click to expand...
Click to collapse
Downloaded, flashed and now have ClockworkMod 6.0.4.7
Thank you.
Just for future knowledge, does anyone knows how to revert to stock recovery?

Pogromonolith said:
Downloaded, flashed and now have ClockworkMod 6.0.4.7
Thank you.
Just for future knowledge, does anyone knows how to revert to stock recovery?
Click to expand...
Click to collapse
Hi,
You will get stock recovery if you flash a stock firmware.
There are also some stock recoveries listed HERE

malybru said:
Hi,
You will get stock recovery if you flash a stock firmware.
There are also some stock recoveries listed HERE
Click to expand...
Click to collapse
Stock recoveries and firmwares.
Cheers!