Related
Is it possible to go from Stock ROM to CyanogenMod via this path:
1. Using Universial Androot to root
2. Install RomManager from the market
3. Install Clockworkmod recovery 3.0.6 from Rom Manager
4. Install CyanogenMod from RomManager
That would be very easy compared to using adb. And it does not require a PC like the various one click root methods.
It should work?
I am asking because these optiions are already in the cyanogenmod wiki (some of them put there by me)
And if it works without problems, it should probably be the recommended update path.
I might try it out myself, but it requires me to go back to stock rom, which I haven't done before. If I understand correctly, it is not possible to flash a 1.6 ROM from a new Clockworkmod recovery, I would have to go back to maverick or amon ra recevery?
I am running Cyanogenmod nb 12, and clockworkmod recovery 3.0.6 at the moment.
to get back to stock rom, you just have to connect your phone to the PC, and double click the .exe of the ROM
I am not using windows, and do not have a rom exe file. I rooted and flashed my phone via adb on linux. I do have a nandroid backup of my stock room after it was rooted though.
Then flash back the old amonra recovery, before restoring your backup because it won t work with the latest clockworkmod
christick said:
Then flash back the old amonra recovery, before restoring your backup because it won t work with the latest clockworkmod
Click to expand...
Click to collapse
Ok thanks, I just heard from some one at cyanogen that using RomManager to flash the recorvery on a rooted stock rom won't work. So I guess the update path in the first post is not valid...
finnk said:
It should work?
Click to expand...
Click to collapse
Uhm... I think not: is missing the "insmod tattoo-hack.ko" and it will fail the "remount" operation (and then the flash).
IMHO.
Bye
Diego
diego72 said:
Uhm... I think not: is missing the "insmod tattoo-hack.ko" and it will fail the "remount" operation (and then the flash).
IMHO.
Bye
Diego
Click to expand...
Click to collapse
Yes, I think you are right. Stock rom needs the tattohack loaded before flashing a recovery.
finnk said:
Yes, I think you are right. Stock rom needs the tattohack loaded before flashing a recovery.
Click to expand...
Click to collapse
Well, i had a CyanogenMod "installed" on my tatto, and i flashed it back to the stock 1.6 rom without installing anything, without problem.
i guess that's the question, isn't it?
I used the method you're saying, Androot+Flash Recovery from Rom Manager to the latest ClockworkMod and unfortunately it's not working.
I don't know if it is because the new clockworkmod but my advice is don't use this method. I posted some questions in other threads but nobody could help me.
I reflashed Clockwork several times even to 3.0.6, but the startup recovery menu still the same.
What's the deal? I'm rooted on the stock ROM. I rooted with the toolkit. I'm using ROM Manager to reboot into recovery.
did you install a custom recovery? rooting does not install a custom recovery
munchy_cool said:
did you install a custom recovery? rooting does not install a custom recovery
Click to expand...
Click to collapse
Yes I did. I just used CWM to run a nanroid. Interestingly, I just reflashed through ROM Manager and now I'm in!
resrevni said:
Yes I did. I just used CWM to run a nanroid. Interestingly, I just reflashed through ROM Manager and now I'm in!
Click to expand...
Click to collapse
cool...enjoy the n4 then buddy.
munchy_cool said:
cool...enjoy the n4 then buddy.
Click to expand...
Click to collapse
Thanks. So is there a way to have CWM survive reboots? Or does it have to be reflashed all the time?
^ This must've been a problem when running stock I seem to be able to reboot to CWM with no problem that I'm running a custom ROM.
All is well in the world.
Sometimes you may need to delete or rename the stock recovery first. Use a file explorer with root access and rename /system/etc/install-recovery.sh to /system/etc/install-recovery.bak
Once this is done, you can use ROM Manager or TWRP to reflash your custom recovery and it will survive a reboot without problem.
resrevni said:
Thanks. So is there a way to have CWM survive reboots? Or does it have to be reflashed all the time?
^ This must've been a problem when running stock I seem to be able to reboot to CWM with no problem that I'm running a custom ROM.
All is well in the world.
Click to expand...
Click to collapse
there is a revert recovery disabler in the dev forum. here http://forum.xda-developers.com/showthread.php?t=1995440
I had this exact problem earlier too. After you have re-flashed CWM recovery, boot into CWM and then pick the option it gives you to make the custom recovery survive and not get replaced by stock recovery.
Sent from my Nexus 4 using xda premium
just flash TWRP better than CWM. flashed TWRP and never had this problem of recovery not sticking but do what
rod said,
Sometimes you may need to delete or rename the stock recovery first. Use a file explorer with root access and rename /system/etc/install-recovery.sh to /system/etc/install-recovery.bak
Click to expand...
Click to collapse
Hello. I just received my OTA notification, but when I clicked it, it rebooted and landed my on the TWRP recovery screen. Not knowing what to do, I just told it to reboot to the system.
Once rebooted, I was still on 4.2.1, and there was no update.
Any ideas why it booted to TWRP?
The OTA update requires stock recovery in order to be flashed. I recommend you just flash the update manually using fastboot, and you won't lose data.
MacHackz said:
The OTA update requires stock recovery in order to be flashed. I recommend you just flash the update manually using fastboot, and you won't lose data.
Click to expand...
Click to collapse
Maybe before you even answer, I'm sure I'll find a link on here to show me how?
One issue I have though, is that when I manually updated to 4.2.1 on my Nexus 7, I still got an OTA update a few days later, that actually ran.
I don't ever plan on flashing roms to any of my devices. Do I need to keep a custom recovery on my Nexus 4 or 7? If not, how to I revert back to the stock recovery?
If you saved the offical stock 4.2.1 images, to revert back to stock recovery, just use the 'fastboot flash recovery recovery.**************.img' command. If you haven't, you might have to flash the whole 4.2.2 rom which you can find on the google dev website. After this, if you only want to root then you don't need to flash a custom recovery, just use the 'boot' command instead of the 'flash' one.
MacHackz said:
The OTA update requires stock recovery in order to be flashed. I recommend you just flash the update manually using fastboot, and you won't lose data.
Click to expand...
Click to collapse
I flashed the OTA sideload file through TWRP and it installed succesfully.
jvbferrer said:
I flashed the OTA sideload file through TWRP and it installed succesfully.
Click to expand...
Click to collapse
How did you do that? Did you sideload wrinkle's file from this thread: http://forum.xda-developers.com/showthread.php?t=2145848?
I should let you know, that while I'm not afraid to install via the custom recovery, it doesn't mean I've done it via commands. I've always used toolkits, or one click methods of rooting and installing custom recoveries.
Well, this is crazy (weird?). I tried to flash it via TWRP by downloading the zip file in the thread referenced above, and it failed. By flashing, I mean, I chose 'Install' and pointed to the zip after moving it to my phone. After failing, I wiped the Dalvik cache and rebooted, and it's telling me 'Android is upgrading'. If it means it updated, so be it. But can anyone explain? Feeling a little confused here.
Edit: Ok, so it said it was upgrading, but it's still 4.2.1.
wvcadle said:
Well, this is crazy (weird?). I tried to flash it via TWRP by downloading the zip file in the thread referenced above, and it failed. By flashing, I mean, I chose 'Install' and pointed to the zip after moving it to my phone. After failing, I wiped the Dalvik cache and rebooted, and it's telling me 'Android is upgrading'. If it means it updated, so be it. But can anyone explain? Feeling a little confused here.
Edit: Ok, so it said it was upgrading, but it's still 4.2.1.
Click to expand...
Click to collapse
It 'upgrades' when you wipe the cache. It just means it's rebuilding the cache. Are you running an unmodified stock rom? Custom kernel?
MacHackz said:
It 'upgrades' when you wipe the cache. It just means it's rebuilding the cache. Are you running an unmodified stock rom? Custom kernel?
Click to expand...
Click to collapse
Yes, stock rom, rooted and unlocked. I did install Beats today. Could this be the problem? If so, I found a revert zip that I'm assuming is supposed to revert me back to stock audio codecs.
I don't think added files matter, but I'm guessing the Beats mod has overwritten something in system, so flash the revert zip, then try again.
MacHackz said:
I don't think added files matter, but I'm guessing the Beats mod has overwritten something in system, so flash the revert zip, then try again.
Click to expand...
Click to collapse
Flashing the revert zip failed. I'm starting to think that flashing anything with TWRP will fail.
How about this. I made a backup of all system data + apps with Titanium earlier today. Could I just reset my phone back to factory defaults, restore my apps + some system data, then re-root (*without a custom recovery*) and wait for the update again? Or will it come again?
Also, I've used Wugfresh's Nexus Toolkit. I don't remember checking the custom recovery button, but ended up with TWRP anyway. What's the easiest way to root without installing a custom recovery?
You could try that, and the update will come straiht away. You can root without flashing a custom recovery, just use the 'boot recovery' instead of 'flash recovery'
MacHackz said:
flash cwm and see if there's any difference
Click to expand...
Click to collapse
How do I do that with TWRP? Can I do it with Wug's Nexus toolkit?
wvcadle said:
How do I do that with TWRP? Can I do it with Wug's Nexus toolkit?
Click to expand...
Click to collapse
I'm not familiar with any toolkits, I would recommend flashing cwm using fast boot
MacHackz said:
I'm not familiar with any toolkits, I would recommend flashing cwm using fast boot
Click to expand...
Click to collapse
Ok, I'm surely not afraid to use the command prompt. Any tutorials you can point me to? I probably already have all of the drivers I need, as the toolkit had to download install them.
wvcadle said:
Ok, I'm surely not afraid to use the command prompt. Any tutorials you can point me to? I probably already have all of the drivers I need, as the toolkit had to download install them.
Click to expand...
Click to collapse
Check out this thread. Use flash to flash and overwrite TWRP, or boot just to test. http://forum.xda-developers.com/showthread.php?t=1995440
MacHackz said:
Check out this thread. Use flash to flash and overwrite TWRP, or boot just to test. http://forum.xda-developers.com/showthread.php?t=1995440
Click to expand...
Click to collapse
Where in that thread does it show me how to flash the stock recovery back onto my device?
wvcadle said:
Hello. I just received my OTA notification, but when I clicked it, it rebooted and landed my on the TWRP recovery screen. Not knowing what to do, I just told it to reboot to the system.
Once rebooted, I was still on 4.2.1, and there was no update.
Any ideas why it booted to TWRP?
Click to expand...
Click to collapse
The same thing happened to me. I was rooted running stock ROM with TWRP recovery (used wugfresh toolkit). The problem was I forgot I was using a modified kernel (for color correction) by molesarecoming. I flashed the stock kernel back, downloaded and flashed the OTA file from the help desk thread (http://forum.xda-developers.com/showthread.php?t=2145848&highlight=beats), and it worked. Oh, and I flashed the Superuser file immediately after the OTA did it's thing (while still in TWRP) to regain root. I didn't really like how after the initial failed install of the OTA, it took my into TWRP with no error message showing or anything.
I don't think TWRP is your problem -- I think beats is your problem. It may have modified something. Try searching the above-linked thread for answers. Honestly, there's no rush to get 4.2.2, so take your time finding the answer. It's better than wiping the phone just to install a small android update and having to redo everything on your phone again.
Ok, it must have been the Beats audio drivers. I restored a Nandroid backup from right before installing the beats audio drivers, then flashed the zip and it worked. Now running 4.2.2.
I would like to know, however, how to use fastboot via commands, so that I can learn how to flash TWRP, CWM, Stock recovery, etc.
wvcadle said:
Ok, it must have been the Beats audio drivers. I restored a Nandroid backup from right before installing the beats audio drivers, then flashed the zip and it worked. Now running 4.2.2.
I would like to know, however, how to use fastboot via commands, so that I can learn how to flash TWRP, CWM, Stock recovery, etc.
Click to expand...
Click to collapse
I need some help here - I have nexus 7 with 3G and Google (takju) with 4.2.1 installed.
I had it 'rooted" and installed TWRP .
AT the time I followed instructions to chand extension of some file to .bak - to prevent 'unrooting"
I do not remember which file I unfortunately changed.
Now I cannot install the 4.2.2 upgrade - the OTA fails because it boots into TWRP and after that I rrid several selections from TWRP screen (flash, reboot, etc) - but all attempts failed.
I have the upgrade files (bot .tar and .zip) on /sdcard directory but have no idea how to update to 4.2.2.
Tried manual flashing using adb command - all fails.
I do not have beats drivers installed
Can someone tell me how to uninstall TWRP? If the CWM recovery works with this upgrade, I would like to change from TWRP to CWM.
Or any other suggestion wold be appreciated.
I am really struggling with Android operating system the way it configured on Nexus 7 by Google - any simplest is a major pain!
Hope I can get out of this and operate the device instead of continuously meddling with operating system.
Thanks in advance
[email protected]
Hi,
It seems that I have CWM and recovery installed on my Nexus 4. I was on TWRP previously and switched to CWM, now it seems that it is stucked.
I erased recovery in command prompt and flash it with CWM after installing stock ROM but ROM Manager still detected TWRP. How do I get rid of TWRP?
Zouk18 said:
Hi,
It seems that I have CWM and recovery installed on my Nexus 4. I was on TWRP previously and switched to CWM, now it seems that it is stucked.
I erased recovery in command prompt and flash it with CWM after installing stock ROM but ROM Manager still detected TWRP. How do I get rid of TWRP?
Click to expand...
Click to collapse
try flashing stock recovery via adb
If you reboot into recovery does CWM come up or TWRP? If it's CWM then ignore ROM Manager and continue as normal
ijustzeke said:
try flashing stock recovery via adb
Click to expand...
Click to collapse
So you are suggesting that I erase and flash to stock recovery via adb and then flash custom recovery again?
EddyOS said:
If you reboot into recovery does CWM come up or TWRP? If it's CWM then ignore ROM Manager and continue as normal
Click to expand...
Click to collapse
CWM comes up as the recovery because it's the latest one I flash. I know it might now matter but this really bugs me.
Dunno why you're using ROM Manager anyway, pointless piece of software IMO. Just flash everything manually
Mine was gone when i unrooting the device
Sent from my Nexus 4
EddyOS said:
Dunno why you're using ROM Manager anyway, pointless piece of software IMO. Just flash everything manually
Click to expand...
Click to collapse
I was just checking out the app, don't really use it. That was when I saw two recoveries. I erased and flashed everything via adb previously. Just really wanna know the cause and how to get rid of it.
curtzxion said:
Mine was gone when i unrooting the device
Sent from my Nexus 4
Click to expand...
Click to collapse
Is there a way just to unroot but keep my ROM, kernel and data intact?
Zouk18 said:
I was just checking out the app, don't really use it. That was when I saw two recoveries. I erased and flashed everything via adb previously. Just really wanna know the cause and how to get rid of it.
Is there a way just to unroot but keep my ROM, kernel and data intact?
Click to expand...
Click to collapse
My rom, kernel, and data doesn't change, when i was unrooting the device(as i remember)
Sent from my Nexus 4
That's normal. I have it too. Just choose cwm on recovery already installed and leave it like that.
Sent from my Nexus 4 using xda premium
Hey all,
I RSD'd the other day and then re-rooted and re-unlocked the bootloader (yes, I now know it stays unlocked) and flashed CWM v6.0.1.4 recovery.
Now none of the custom ROMs will boot, though they install correctly in recovery. From CyanogenMod to Carbon to AOSP, it just sits on the boot animation... I've let it sit for up to half an hour.
I'm wiping data and cache, though CWM says E:Can't mount /cache/recovery/pretty-much every subfolder, but that doesn't seem like a big deal...
So what am I doing wrong, here, any ideas? It doesn't matter if I install the ROMs and GAPPS from external SD, right?
I RSD'd to 96.15.66, the one where I can unlock the bootloader, and the only ROM I can get to boot is Clean Rom (basically stock with tweaks of course).
jimmyco2008 said:
Hey all,
I RSD'd the other day and then re-rooted and re-unlocked the bootloader (yes, I now know it stays unlocked) and flashed CWM v6.0.1.4 recovery.
Now none of the custom ROMs will boot, though they install correctly in recovery. From CyanogenMod to Carbon to AOSP, it just sits on the boot animation... I've let it sit for up to half an hour.
I'm wiping data and cache, though CWM says E:Can't mount /cache/recovery/pretty-much every subfolder, but that doesn't seem like a big deal...
So what am I doing wrong, here, any ideas? It doesn't matter if I install the ROMs and GAPPS from external SD, right?
I RSD'd to 96.15.66, the one where I can unlock the bootloader, and the only ROM I can get to boot is Clean Rom (basically stock with tweaks of course).
Click to expand...
Click to collapse
are you mounting system first? never used CWM on this device, but in TWRP, they install just fine. I believe that most devs use TWRP (although, it should not make a difference).
Thanks for the reply, actually I have two cwm recovery images, and after the RSD I flashed the "wrong" one... After flashing the other, I was able to flash and boot just fine.
jimmyco2008 said:
Thanks for the reply, actually I have two cwm recovery images, and after the RSD I flashed the "wrong" one... After flashing the other, I was able to flash and boot just fine.
Click to expand...
Click to collapse
Hi Im not sure if Im having this exact issue but I have been having problem since I used Utility 1.20 and re-rooted and re-unlocked my phone. Every ROM I have tried has random reboot issue. Can you tell me exactly how you did it correctly?
Also I didnt understand the two recovery image concept. I was having safe strap before and had issue with stock partition and was using slot1 partition as daily rom. And I couldnt flash any other ROM. So I had to go back to stock with Utility 1.2 and start over. Right now Im having liquidsmooth ROM with CWM recovery. Still having those reboots.
jcxmej said:
Hi Im not sure if Im having this exact issue but I have been having problem since I used Utility 1.20 and re-rooted and re-unlocked my phone. Every ROM I have tried has random reboot issue. Can you tell me exactly how you did it correctly?
Also I didnt understand the two recovery image concept. I was having safe strap before and had issue with stock partition and was using slot1 partition as daily rom. And I couldnt flash any other ROM. So I had to go back to stock with Utility 1.2 and start over. Right now Im having liquidsmooth ROM with CWM recovery. Still having those reboots.
Click to expand...
Click to collapse
are you sure you uninstalled SS via the app (and not via the android system)?
jco23 said:
are you sure you uninstalled SS via the app (and not via the android system)?
Click to expand...
Click to collapse
I dont think I have uninstalled safestrap with an app. I followed the instruction in this thread.
http://forum.xda-developers.com/showthread.php?t=2238341
This thread was started by me when I had problem with flashing ROMs in the stock slot using safestrap. Rikrong suggested I use Utility so that I go back to stock and start all over again. So I did. I guess thats how it should have been done?
jcxmej said:
I dont think I have uninstalled safestrap with an app. I followed the instruction in this thread.
http://forum.xda-developers.com/showthread.php?t=2238341
This thread was started by me when I had problem with flashing ROMs in the stock slot using safestrap. Rikrong suggested I use Utility so that I go back to stock and start all over again. So I did. I guess thats how it should have been done?
Click to expand...
Click to collapse
what I would suggest doing is going into SS via the app (not via recovery once the phone boots up) and click the uninstall button.
then, return to stock as rik suggested.... then root, then install TWRP, then you'll be able to slap on whatever ROM you like.
jco23 said:
what I would suggest doing is going into SS via the app (not via recovery once the phone boots up) and click the uninstall button.
then, return to stock as rik suggested.... then root, then install TWRP, then you'll be able to slap on whatever ROM you like.
Click to expand...
Click to collapse
Actually I did all that already just not by uninstalling SS. Now Im on CWM recovery. I was on SS one week back and then i followed the instructions by rik. I m having reboots ever since.
jcxmej said:
Actually I did all that already just not by uninstalling SS. Now Im on CWM recovery. I was on SS one week back and then i followed the instructions by rik. I m having reboots ever since.
Click to expand...
Click to collapse
I'm thinking the combination of SS and CWM could be the issue.... try to get a clean fresh start would be best....
jco23 said:
I'm thinking the combination of SS and CWM could be the issue.... try to get a clean fresh start would be best....
Click to expand...
Click to collapse
Thats interesting. I dont see safe strap or the rom i was using with SS (energy rom). So then how can i erase SS and get a fresh start? I was assuming Matts Utility already did that for me and I was on a fresh start.
jcxmej said:
Thats interesting. I dont see safe strap or the rom i was using with SS (energy rom). So then how can i erase SS and get a fresh start? I was assuming Matts Utility already did that for me and I was on a fresh start.
Click to expand...
Click to collapse
safestrap could still be there if uninstalled incorrectly. trying re-installing it, then uninstall it within its own app. this worked for me.
jco23 said:
safestrap could still be there if uninstalled incorrectly. trying re-installing it, then uninstall it within its own app. this worked for me.
Click to expand...
Click to collapse
Just installed SS and unnistalled it thru the app. I ll wait for any reboots before I reflash the ROM. Hope this works. (finger crossed)