[Q] Boot Formated, and i don't have pink screen - Huawei Ideos X5 U8800

hey guys,
I formatted the bootloader, now the phone won't boot, even on recovery... For the worse i don't even have access to pink screen (as i already had upgraded to the latest stock rom) . Is there a way to fix this? How can i recover my boot partition without pinkscren?
Sad for this to be my first post here, but i would pretty much appreciate some help on this matter. Thanks in advance guys..

Ok guys, i figured it out. I kinda stressed out in first place.
If you have a similiar situation all you have to do is reinstall your phone with the official stock rom, to recover the boot partition.
http://forum.xda-developers.com/showthread.php?p=24060585#post24060585
Like on that link

Related

Complicated Droid 2 Boot Look Issue

Hey guys let me start by saying I have done quite a bit of searching and im not a total noob when it comes to this stuff. I have still been unable to find an answer to my questions...
So basically I have a Droid 2 and I flashed the CM9 ICS Alpha onto it had it running great (Cant wait to get past alpha ) But due to the fact that its an alpha and really nothing works I wanted to go back to my librity rom... I tried to boot into recovery and that caused a boot loop instead of booting into recovery.
So from there I went to flash the stock SBF onto the phone and it keeps just getting stuck in a boot loop even when flashing the stock SBF. What have I done! lol How do I get this thing back to a factory setup?
I would really like to figure this out but if I cant I will be putting another mobo in it as that may be the easier solution haha
Thanks for taking the time to help me with this and if you know somewhere this has already been discussed please direct me to it as I could not find it...
Nevermind lol
I was able to get it to boot by booting into recovery and running the factory reset. But I had already tried that once before posting this and it had not worked...
Well anyway all is good for me now maybe this will help someone eventually have a great day.

Hard bricked. Please help.

Hello guys, it's time to post new thread. I bricked my G2 really hard. And I'm very pissed of TWRP. So lets explain i was on stock lollipop (pretty nice seen it for last time)... When i decided to go back to CM12 . I had root and twrp and a nice backup of my CM12 system. Everything cool... I started restoring my system again everything was fine until i booted. It showed secure booting error. However i followed this giude. I fond the needed files from Lollipop. All 4 files and TWRP. I installed ubuntu and started doing the job. After flashing everything was looking good until i started the device it showed this white screen giving this errors. On PC it's recognized as LG Modem... I can realize it's really fuc*ed up, but i would like any help. I don't find necessary to say that i need help very fast because you know the battery is going to drain soon. So please help me. Thanks.

PROBLEM Initializing the device

Hi everyone...
I have an awkward issue here with my Nexus 4...
It is in an eternal loop in bootlogo 5.1.1
I already did anything I found in Google search
Flashed ALL firmwares stock, tried some Cyanogenmod and nothing!
I already used simple .bat/.sh in stock folder, used Nexus Toolkit with bricked/bootloop ticked, SkipSoft Tookit and even a tutorial saying to use LGNPST to flash a developer version... this last one worked... but like said in tutorial, the rom is encrypted and the user can do nothing! After that, flashed stock rom and still got stucked in logo!
I did not say, but yes.. I always run ALL wipes
I do not know what else I can do! The phone seems to work normally. I can entry,
download mode, fastboot, recovery but system..
Any ideas?
Thanks for now and sorry about english!
Are you flashing the userdata.img file?
yes and no!
The same result... =/
After flashing userdata.img in fastboot, are you going into recovery using the power and volume buttons to perform a factory wipe?
yes... I already did that too!
Today in the morning, I installed a developer version 4.2 through LGNPST... The phone worked, but it is a old version, I want the last one 5.1.1 and I got the problem that internal memory shows 8GB instead of 16GB...
And I could not resolv this, even reading tutorials from xda forum
If anyone could give me a BIN file of 5.1.1 to use in LGNPST...
no one???
I'm facing the exact same issue, here my post
http://forum.xda-developers.com/nexus-4/help/nexus-4-stuck-animation-android-t3419997
Did u solved it?
No man...
unfortunately I ditched the device!
I've installed Android 4.2.2 and block OTA updates rooting the device, the problem is internally in the device, maybe is a hardware problem, I already made a test of the sensors and none works, for know I'm gonna use it just for phone calls and wapp...
thanks for answer....

LG G2 bricked or not bricked??? how do i fix the problem?

hey everyone,
today i was bored so i took my sisters phone and tried to install a rom on it but i didnt go through the tutorials. I wiped the data, installed the kernel and rom then soon after that the phone would only boot into recovery and download mode. I then read that the phone needed a kitkat bootloader so i downloaded one and installed it. Now my sisters phone wont go into recovery nor will it open as it loops over the boot animation. It can only go into download mode. I dont think it is bricked but i havent seen anyone else with this problem. If it is bricked then how do i find out which kdz file to flash and could someone put up a really easy tutorial for me as I dont find the others to be straightforward. I need urgent help before my sister kills me Thank you
this is the fix, apparently it was a soft brick
http://androidcure.com/unbrick-lg-g2-stock-firmware/

Deleted Bootloader on LeEco S3 X626

A couple weeks back I deleted the OS off of my phone while messing with TWRP recovery trying to install a custom ROM. I looked around the forums and i got my phone to the point where It booted into a stripped down version of android with stock recovery on it, although everything was mirriored and backwards. But when i tried to install the stock rom for my LeEco S3 with stock recovery it got stuck i a boot loop and I couldn't turn off the phone or boot into recovery or anything. So i let it keep booting until it ran out of battery and died. So then i decided i would put the stripped down version back on and start again.
So I went back to my sp flash tool and reinstalled all the partions except the boot and recovery partitions (according to the steps on the forum) but my phone still wont boot into anything, it is completely black and wont boot into recovery or fastboot, and im running out of ideas on how to fix this phone :crying:
After pretty much giving up all hope of fixing my phone, i figured i would try the format option in the flash tool and then reinstall all of the pattitions. I selected format all flash, not doing proper research first, and now i cant even reinstall partions, I get a STATUS_BROM_CMD_SEND_DA_FAIL error anytime i try to flash the partitions.
can you at least get the phone to fastboot mode?
microMXL said:
can you at least get the phone to fastboot mode?
Click to expand...
Click to collapse
No I cannot, The screen is completely black and nothing comes on at all if I hold down the power button.
well damn, looks like a soft brick, it can be repaired but not gonna lie, it is a pain in the butt...
https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937
the guys have made an awesome guide on that thread.
microMXL said:
well damn, looks like a soft brick, it can be repaired but not gonna lie, it is a pain in the butt...
https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937
the guys have made an awesome guide on that thread.
Click to expand...
Click to collapse
I have already looked through that thread, and i have done everything up to the flashing process, and then I get a STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003) Error. I looked it up but the only option I haven't tried to solve the issue is to remove the battery, which i cannot do currently because to remove the battery you need a heat gun to remove the screen to get to the rest of the phone. I think I've given up all hope on fixing this phone and may just begin saving for a new one.
Sgt.Collywobbles said:
A couple weeks back I deleted the OS off of my phone while messing with TWRP recovery trying to install a custom ROM. I looked around the forums and i got my phone to the point where It booted into a stripped down version of android with stock recovery on it, although everything was mirriored and backwards. But when i tried to install the stock rom for my LeEco S3 with stock recovery it got stuck i a boot loop and I couldn't turn off the phone or boot into recovery or anything. So i let it keep booting until it ran out of battery and died. So then i decided i would put the stripped down version back on and start again.
So I went back to my sp flash tool and reinstalled all the partions except the boot and recovery partitions (according to the steps on the forum) but my phone still wont boot into anything, it is completely black and wont boot into recovery or fastboot, and im running out of ideas on how to fix this phone :crying:
After pretty much giving up all hope of fixing my phone, i figured i would try the format option in the flash tool and then reinstall all of the pattitions. I selected format all flash, not doing proper research first, and now i cant even reinstall partions, I get a STATUS_BROM_CMD_SEND_DA_FAIL error anytime i try to flash the partitions.
Click to expand...
Click to collapse
Help, pls I got the exact same problem... Pls any solution to it... I have been at it for a month now no solution, help
same problem. after twrp flash x626 not boot

Categories

Resources