Hi all I am running Aurora and my phone gets very hot on the back is this normal?
Sorry new to all this.
Also is it safe to run setcpu or do I even need too?
Sent from my U8800 using XDA
I have been monitoring it and seems to sit around 33 to 38 but reaches 40 degrees quit often is that OK
Sent from my U8800 using XDA
jharn06 said:
I have been monitoring it and seems to sit around 33 to 38 but reaches 40 degrees quit often is that OK
Sent from my U8800 using XDA
Click to expand...
Click to collapse
Yes many people have reported of the phone getting a little hot. i think you should just choose on set of freq like 1 / 1.2 Ghz and 368 Mhz. Set the Wifi to off when screen in Off. The phone should be fine. too much heat is neither good for the phone nor foe the battery.
Once had the same problem.
All was solved after applying this method (with a little modification)
http://img714.imageshack.us/img714/180/58588168.jpg
,haha.Where can we buy it?
Sent from my U8800 using xda premium
dingdingdang said:
,haha.Where can we buy it?
Sent from my U8800 using xda premium
Click to expand...
Click to collapse
I am afraid I cannot help you.
This top hi-end scientific method is still under development and has taken many years to come this close to perfection.
When it is out for sale I will let you know
lol
sony xperia ray stock rom not rooted
Related
I just started using setcpu and wqs curious what is the normal and safe range for a dinc processor? I want to set a profile but I'm not sure what the temp range is
Sent from my ADR6300 using XDA App
This is where I'm at now
Sent from my ADR6300 using XDA App
I would say 50 degree
ACD168 said:
I would say 50 degree
Click to expand...
Click to collapse
50? because im running around 100 you sure about 50?
Kipphh said:
50? because im running around 100 you sure about 50?
Click to expand...
Click to collapse
I think he meant 50 celsius.
Sent from my ADR6300 using Tapatalk
CMPVP said:
I think he meant 50 celsius.
Sent from my ADR6300 using Tapatalk
Click to expand...
Click to collapse
I never like it to get above 45 c.
my setcpu profiles kick in at 44c
Heat
I am on DINC # 3. DINC # 1 would, for no particular reason, start to superheat, getting to to 108-109F. By 113F it would start rebooting to the initial screen, then go black, then go to the initial screen, then go black ... 4-13 times. That got very old so I sent it back.
Heat can be an issue.
Currently at 102.2F as reported by setcpu widget while plugged in and using it for the past half hour or so. Seems kinda high to me, what's everyone elses experience?
Sent from my DROID2 using XDA App
Well when its plugged in it will be warmer than normal. Right now my phone has been on with constant texting and random other usage all day long and I am at 80.6 degrees
My phone stays in the mid 90s and early 100s with regular use. It only gets in the 80s if I leave it completely alone for an hour or so.
Sent from my DROID2 using XDA App
I stay mostly in the 80s and can get into the 90s with heavy use. Don't think I've ever passed 100, but there's a chance something like psx4droid could have pushed me up. I average about 86F.
Sent from my DROID2 using Tapatalk
aeidian said:
Currently at 102.2F as reported by setcpu widget while plugged in and using it for the past half hour or so. Seems kinda high to me, what's everyone elses experience?
Do you use the SetCPU profiles? You could set one to underclock the processor while charging.
Sent from my DROID2 using XDA App
Click to expand...
Click to collapse
Sent from my DROID2 using XDA App
Redneck Trash said:
Sent from my DROID2 using XDA App
Click to expand...
Click to collapse
I do, its set to 800mhz when charging. 600mhz if it gets above 104F regardless of charging or not. Leaving it alone on the charger for the last half hour the temp shows 92F. Just firing up Xda app and typing this out the temp has jumped to 98F in about a min of use.
Sent from my DROID2 using XDA App
Are you guys using SetCPU for profiles and overclocking, or are you just using it for checking temps and current speed?
These are the droids you are looking for.
vagely said:
Are you guys using SetCPU for profiles and overclocking, or are you just using it for checking temps and current speed?
These are the droids you are looking for.
Click to expand...
Click to collapse
I was using it to check temps for this but I use 2 profiles, which may help my temps (def helps my batt). The default profile is 1000 max, 300 min, on demand. The other is when my screen is shut off, 300 max, 300 min. I've found this has saved me a pretty sizeable chunk of battery. I tend to listed to music 7-8 hours a day and while it doesnt need full CPU it will use it if it gets the chance. Restricting the proc to 300 off has never caused any issues and I can get from 8am - 4 or 5pm staying over 70% battery I have the unstable apps overclock and used it for a while, but kinda came to the conclusion that I can't really justify needing to overclock yet as I never see any lag. I guess if I run into any lag at some point I'll prob clock back up to 1.3 or so.
vagely said:
Are you guys using SetCPU for profiles and overclocking, or are you just using it for checking temps and current speed?
These are the droids you are looking for.
Click to expand...
Click to collapse
I did overclock, but it ran way too hot, like 107F during normal use and didnt get below 100 dormant. 1gig is high enough to me. I have it set to underclock when charging or when below 50% battery or when above 104F.
Sent from my DROID2 using XDA App
aeidian said:
I do, its set to 800mhz when charging. 600mhz if it gets above 104F regardless of charging or not. Leaving it alone on the charger for the last half hour the temp shows 92F. Just firing up Xda app and typing this out the temp has jumped to 98F in about a min of use.
Only other idea I have is downloading Droid Overclock and try running at low or ultra low voltage. Make sure to make a backup first. And try low before ultra low. Individual devices can be picky about a lower voltage and can go into a bootloop if it can't run on a lower voltage. Droid Overclock has profiles like SetCPU.
Sent from my DROID2 using XDA App
Click to expand...
Click to collapse
Sent from my DROID2 using XDA App
I didn't see an answer for this anywhere. What is the maximum temp this phone can safely handle before it starts getting damaged? It's starting to get warmer and i want to know when i should start to be concerned.
Sent from my demonSPEED Glacier using XDA Premium App
Be concerned when it enters the 100's(F), which it gets to while charger sometimes at high freqs and around 110ish. With normal use mines stays in the 90's or 80's.
Ace42 said:
Be concerned when it enters the 100's(F), which it gets to while charger sometimes at high freqs and around 110ish. With normal use mines stays in the 90's or 80's.
Click to expand...
Click to collapse
I think it got up to 114 once and I had pulled of the battery cover and held it in front of the ac til it hit 85 degrees.
Sent from my demonSPEED Glacier using XDA Premium App
eqjunkie829 said:
I think it got up to 114 once and I had pulled of the battery cover and held it in front of the ac til it hit 85 degrees.
Sent from my demonSPEED Glacier using XDA Premium App
Click to expand...
Click to collapse
What freqs do you use on your MT4G? According to your sig you have MIUI, no?
That rom should run fine on Scary/Conservative instead of demonspeed or smartass. Temps will be lower with Scary/conserv governor enabled.
Ace42 said:
What freqs do you use on your MT4G? According to your sig you have MIUI, no?
That rom should run fine on Scary/Conservative instead of demonspeed or smartass. Temps will be lower with Scary/conserv governor enabled.
Click to expand...
Click to collapse
It doesn't seem to matter what gov i use, I'm clocking at 902 max.
Sent from my demonSPEED Glacier using XDA Premium App
eqjunkie829 said:
It doesn't seem to matter what gov i use, I'm clocking at 902 max.
Sent from my demonSPEED Glacier using XDA Premium App
Click to expand...
Click to collapse
Odd..Unless the phone is kept in a warm or hot area, and is being used heavily too. Under 1GHz the temps should be fine, do you use the phone a lot?
mine hit mid 160's one day when my charger didn't stop charging (was at 99% for a couple hours) didn't do any damage, still on original battery and seem to get decent battery life on fusion/faux 0.7 kernal.
Sent from my HTC Glacier using XDA App
Onefast said:
mine hit mid 160's one day when my charger didn't stop charging (was at 99% for a couple hours) didn't do any damage, still on original battery and seem to get decent battery life on fusion/faux 0.7 kernal.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
OMG i would be in a panic if i saw battery temp that high! I get concerned over 110.
my phone overheated to the point where parts of the touchscreen wouldnt respond. after it cooled down...everything was fine.
i got this when using assisted gps....
VibrantOwnr said:
my phone overheated to the point where parts of the touchscreen wouldnt respond. after it cooled down...everything was fine.
i got this when using assisted gps....
Click to expand...
Click to collapse
You're putting the HW parts at risk..Especially the CPU which can fail from those temps, this isnt a desktop CPU which has cooling to help the chip. These mobile chips shouldnt stay at those ranges. How can you even hold the phone at those temps? That's just crazy IMHO.
Ace42 said:
You're putting the HW parts at risk..Especially the CPU which can fail from those temps, this isnt a desktop CPU which has cooling to help the chip. These mobile chips shouldnt stay at those ranges. How can you even hold the phone at those temps? That's just crazy IMHO.
Click to expand...
Click to collapse
i realized that...i wasnt trying to keep the phone at that temp, it just suddenly happened...as soon as i noticed...i turned off the phone and pulled the battery.
the phone wasnt that hot...its the cpu
VibrantOwnr said:
i realized that...i wasnt trying to keep the phone at that temp, it just suddenly happened...as soon as i noticed...i turned off the phone and pulled the battery.
the phone wasnt that hot...its the cpu
Click to expand...
Click to collapse
I see, well do you use OC too or normal frequency range? I used to have a Sammy before the MT4G, and it would get really warm even w/o changes to CPU clock(But it uses Conserv. by default). These 1GHz+ chips generate lots of heat, I wonder if this is related to those bad EMMCs failing too...
I've been using my phone constantly for a few hours and the battery is at 41°C which is almost out of the safe limit of 45°C is there anyway to keep the battery from getting to this state??
Sent from my u8800 using xda premium
What is you clockspeed?
600 - 1.0 GHz
SmartassV2
Sent from my u8800 using xda premium
Maybe you should lower the min? it might be a problem. I don't know.
Could the outside temperature also be a contributing?
Sent from my u8800 using xda premium
Maybe, but your minimum speed is most likely the contributing factor. By keeping it at 600 you're telling the phone to always stay at that speed, even when it doesn't need to and it's trying to idle to save battery
If you want to keep it at 600, do so but at least use SetCPU to create a profile that'll set the minimum to ~245 MHz when the display goes off
Disregard me, sorry. I didn't see that you were using your phone constantly
The battery of the x5 is a LiPo. The critical temp of a Lipo is 60 degrees. When the temp is over 60c it will lose lifetime.Ofcourse less temperature is better...Myself I own many really big lipo packs (RC hobby) and they are just good at 45C. But this is a phone battery so.....atleast I can say that 45c wont really harm the battery, If you aren't using 24/7 on that temp. The battery temp of my stock x5 is usually 26-34c.
Aslong as your fingers aren't burning......everything is OK
Sent from my IDEOS X5 using XDA App
What would be the temperature of the phone when overheating?
Sometimes it feels like the temperature is very high but I don't know if it's overheating or not. The maximum I had was 36.0°C/96.8°F.
how can you tell? the phone temp keeps staying at 0C...
bs828 said:
how can you tell? the phone temp keeps staying at 0C...
Click to expand...
Click to collapse
Pcfighter's CM7 ROM has a working temperature sensor
I've seen mine go up to 42°C
Sent from my LG GT540 Swift using XDA App
mohnim said:
I've seen mine go up to 42°C
Sent from my LG GT540 Swift using XDA App
Click to expand...
Click to collapse
i have setcpu profile set to: >37 °C 600 mhz so it usually never goes higher than maybe 38°C
if you think its hot if must be around 40° or more
Lol today mine went up to 49°C
Really hot
Sent from my LG GT540 Swift using XDA App
Its now 32 Its working for 16 hrs. I wonder how is it while charging