ok, so
volume buttons + , - on the flex on my hd mini are not there anymore
i google it around and i did not find something useful
how can i increase sound in call? a tweak or a edited registry or something
please?
32 views and not a tiny answer? i don't know how to edit audiopara, someoane can explain?
Related
Hi
Had a good search but can't seem to find anything on this topic.
I'd like to lower the volume of the phone keypad - its too excessive for my tastes and I can't seem to find any settings to lower it.
The manual doesn't seem to offer much help either.
Anybody any good ideas?
Ta
MDA
I am finding this too - only after I installed a new dialer skin. I am sure that before i installed the new skin the volume of the dialpad was consistant with the volume set in the phone.
Can anybody confirm?
hi, on my tornado i reduced the keypad sounds by start / settings /profile / normal / edit /system sound volume, hope this helps
Maybe it's just me but the sound when i change the volume of the diamond freaks me out... especially when i'm listening music with earplugs and i just wanna do it a little more louder it disturbs me.
Is there a way to make them go away? Maybe just erase the soundfiles? If yes, can somebody please tell me where i can find them?
pls help me
You can disable the 'sound beeps while changing volume' by using Diamond Tweak.
Thanks a lot for helping me fixing my problem...
I installed diamond tweak already but i did not find a tweak for fixing my prob.
I have Installed the 0.5 version is there a newer one? I couldn't find one in the internet so far...
Tweak # 1.5 in Diamond Tweak.
But it is only for in call beeps as the description says. Still you can try it. Sorry if it doesnt help.
still have this issue on Wm6.5 energyrom phoenix 2
I cannot disable the volume change sound.
Tried looking for wav files, tried using advancedtweak (And other tweak programs).
I can only get them to shut off when in a call. I want them to be disabled forever. Any solution ideas
Same here. I have looked in the registry and I can't find anything about the volume beep not incall.
i was looking for the same thing and the only solution i found was to install another volume control app
S2U2 includes a silent volume control that works perfectly
Hi,
When browsing the HD2 forums (I'm gonna get one in a few days, yay!) I found this:
75. Disable Beeps When Altering Volume
When you press the volume key you getting annoying beeps. This tweak allows to change the volume silently without the beeps.
HKCU\ControlPanel\Volume\Mute Change from 3 to 1.
It worked on my TP so I assume it'll work on you Diamond to.
Cheers,
/Cacti
le_cactus said:
Hi,
When browsing the HD2 forums (I'm gonna get one in a few days, yay!) I found this:
75. Disable Beeps When Altering Volume
When you press the volume key you getting annoying beeps. This tweak allows to change the volume silently without the beeps.
HKCU\ControlPanel\Volume\Mute Change from 3 to 1.
It worked on my TP so I assume it'll work on you Diamond to.
Cheers,
/Cacti
Click to expand...
Click to collapse
Just tested on Topaz and it works like a charm
So simple
Cheers for that mate
Take care
actually tested it and it's wrong
what it does is disables events, reminders and sets notifications to silent
maybe it works on Leo but not on Topaz
hi, i was wondering if anyone knew how to disable the full screen volume control thingy.. to replace the gray background full screen volume levels with the classic small volume popup bubble.. thanx in advance..
I asked the same question a couple of weeks ago and someone pointed me to a cab file from the Diamond forum that did the trick. if you search this forum for threads started by me with the word 'volume' in the title you'll find it.
yup, found the cab.. thanx
Hi all,
i know there are reg tweaks for making the hd external and internal speakers louder... ( hdtweak )
anyone knows the reg keys? will like to manual edit..
another.. how do i remove the startup htc animation.. i deleted startupanimation reg key.. but no use...
"help i neeed somebody..... help anybody .. helppppppppppp"
i replace my AudioPara*.csv files on my HD with the ones included in the cab file. they work for me... and you're welcome to try for yourself. install the cab file, soft reset, make a call and adjust your volume using the volume keys. I'd like know if you notice a difference in earpiece volume. for me there's a very notable difference in earpiece volume. if you don't like or notice a difference, then uninstall and soft reset and your original files will be restored.
cortez.i said:
i replace my AudioPara*.csv files on my HD with the ones included in the cab file. they work for me... and you're welcome to try for yourself. install the cab file, soft reset, make a call and adjust your volume using the volume keys. I'd like know if you notice a difference in earpiece volume. for me there's a very notable difference in earpiece volume. if you don't like or notice a difference, then uninstall and soft reset and your original files will be restored.
Click to expand...
Click to collapse
hmmm isnt the settings in the reg instead of files??
btw, do u know anything about the startup animation?
thanks ~~
ok...Installed WP7 + Magldr 1.12 and works perfect. Very Loudest Ringtone and Systemtone without Earphone.
Activate works perfect. Thx Microsoft German Support!
But i want use my InEarphones and listen Music and now its to low...!
I found the Registry Entrys but how make the Volume for Music higher? What is the right Entry for this? Anybody helps?
I need music music volume higher...
Thx DarkForcesTeam for this work...
It's completed mess with volumes.
1) Media & ring volume are too LOUD
2) System notifications with same level like 1) are too LOW
Just use the rocker switches to adjust volume level
stephandelaat said:
Just use the rocker switches to adjust volume level
Click to expand...
Click to collapse
What is this?
stephandelaat said:
Just use the rocker switches to adjust volume level
Click to expand...
Click to collapse
Whut?
Rocker Switches?
Wrong forum, ffs why are people still posting crap in the dev sections??
Thread reported!
Mine is stupidly loud on ringtones and media etc (to distortion), and it's also too loud through headphones.
When I say this I mean that the loudest setting is over the top and not much use since it's distorted - that's fine, I just won't turn it up that high - simples!
But the problem is that on the lowest setting (1/20) both ringtones and media are still too loud for what should be kind of barely audible. Now that is not easy to workaround so I'd love to sort it out.
Update - got my excessive volume fixed now with the registry edit posted elsewhere by changing the value from 45 to 70.
Now volume level 1 is really quiet how it should be.
Cret said:
Update - got my excessive volume fixed now with the registry edit posted elsewhere by changing the value from 45 to 70.
Now volume level 1 is really quiet how it should be.
Click to expand...
Click to collapse
If you happen to find that thread again please post it here as I would really appreciate it.
Kenichi
i did the registry edit too but speakers sound awful still when i want to turn it up a bit to listen to music or videos.... very annoying
Cret said:
Update - got my excessive volume fixed now with the registry edit posted elsewhere by changing the value from 45 to 70.
Now volume level 1 is really quiet how it should be.
Click to expand...
Click to collapse
+1 - please share your findings (where is this reg key, what variable?)
edit:
I found the variable he's talking about.
[HKEY_CURRENT_USER\ControlPanel\Volume]
"MaxdBAtten"=dword:2D (2D = 45)
I suspect this will not change the ringtone to notification volume differences?
Heimiko said:
+1 - please share your findings (where is this reg key, what variable?)
edit:
I found the variable he's talking about.
[HKEY_CURRENT_USER\ControlPanel\Volume]
"MaxdBAtten"=dword:2D (2D = 45)
I suspect this will not change the ringtone to notification volume differences?
Click to expand...
Click to collapse
any way of entering this in the phone ?
as a regeditor or something ?
Confirm this works a treat, here is the reg editor
THUDUK said:
Confirm this works a treat, here is the reg editor
Click to expand...
Click to collapse
can you confirm the volume difference between ringtone and notifications is still there? or does this also solve that as well?
Heimiko said:
can you confirm the volume difference between ringtone and notifications is still there? or does this also solve that as well?
Click to expand...
Click to collapse
I think I just fixed this. I saw a registry edit for WM 6 & it the directory still exists.
HKCU\ControlPanel\SoundCategories\
In each of it's sub directories, change the InitVol value to 100. I notice some were 100 already while others were 85 or even 65. I think this means 100% volume/85% volume/65% volume. Change them all to one value & you'll equalize the volume across the board.