Hi
Had a good search but can't seem to find anything on this topic.
I'd like to lower the volume of the phone keypad - its too excessive for my tastes and I can't seem to find any settings to lower it.
The manual doesn't seem to offer much help either.
Anybody any good ideas?
Ta
MDA
I am finding this too - only after I installed a new dialer skin. I am sure that before i installed the new skin the volume of the dialpad was consistant with the volume set in the phone.
Can anybody confirm?
hi, on my tornado i reduced the keypad sounds by start / settings /profile / normal / edit /system sound volume, hope this helps
Related
Hi all,
Looks like my T-Mobile MDA Vario II is heading the way of the D-Pad/White Screen ribbon failure (http://forum.xda-developers.com/showthread.php?t=321163) but as I've not yet got the white screen, and the problem is intermittent I wanted to ask a software question first before I broke out the screwdrivers.
Is there an easy way to change the soft key actions during a incoming call, so that I can click on the screen instead of the answer hardware key to answer a call reliably?
From reading around it may be that this is locked to the particular dialer as none of the key config tools seem to allow you to change these temporary soft key items?
At the moment I'm running Schaps 4.30 ROM which I've found very stable and feature packed, but when there's an incoming call the soft keys change to 'Silence' and 'Send Text' neither of which are as important to me as 'Answer' and 'Reject' which is what I'd like on there.
If it is a case that these soft keys can't be changed via the registry does anyone know of a WM6-6.1 ROM or Dialer that does have the options I need?
Many thanks in advance for any help!
I'm pretty sure my ROM does the 'Answer' and 'Reject' soft keys... I'm pretty sure that's the default too... If Schaps has something different, then I think he changed it away from the default to what he has...
Many thanks now on latest CRC 6.1 Stable
Hi CRC,
Many thanks for your quick reply, flashed to your latest WM 6.1 Stable ROM last night and can confirm Accept/Reject Softkeys on answer are present and work great!
ROM also feels smoking fast, so will leave it as is for a week or so and then might move to your development ROM to help give feedback and squash bugs.
Obviously your ROMs are very clean so looks like I'll start heading off to find all those Cabs like 6 button Home, Big Start Menu and Audio Manager that make life that little bit more thumb friendly.
Really appreciate the work you do getting the engine tuned so well! (You should get a small donation come through soon.)
Alan
(Now I can wait until IE opening whenever a new txt comes in finally drives me mad enough to crack the case and try to fix the ribbon cable!)
Maybe it's just me but the sound when i change the volume of the diamond freaks me out... especially when i'm listening music with earplugs and i just wanna do it a little more louder it disturbs me.
Is there a way to make them go away? Maybe just erase the soundfiles? If yes, can somebody please tell me where i can find them?
pls help me
You can disable the 'sound beeps while changing volume' by using Diamond Tweak.
Thanks a lot for helping me fixing my problem...
I installed diamond tweak already but i did not find a tweak for fixing my prob.
I have Installed the 0.5 version is there a newer one? I couldn't find one in the internet so far...
Tweak # 1.5 in Diamond Tweak.
But it is only for in call beeps as the description says. Still you can try it. Sorry if it doesnt help.
still have this issue on Wm6.5 energyrom phoenix 2
I cannot disable the volume change sound.
Tried looking for wav files, tried using advancedtweak (And other tweak programs).
I can only get them to shut off when in a call. I want them to be disabled forever. Any solution ideas
Same here. I have looked in the registry and I can't find anything about the volume beep not incall.
i was looking for the same thing and the only solution i found was to install another volume control app
S2U2 includes a silent volume control that works perfectly
Hi,
When browsing the HD2 forums (I'm gonna get one in a few days, yay!) I found this:
75. Disable Beeps When Altering Volume
When you press the volume key you getting annoying beeps. This tweak allows to change the volume silently without the beeps.
HKCU\ControlPanel\Volume\Mute Change from 3 to 1.
It worked on my TP so I assume it'll work on you Diamond to.
Cheers,
/Cacti
le_cactus said:
Hi,
When browsing the HD2 forums (I'm gonna get one in a few days, yay!) I found this:
75. Disable Beeps When Altering Volume
When you press the volume key you getting annoying beeps. This tweak allows to change the volume silently without the beeps.
HKCU\ControlPanel\Volume\Mute Change from 3 to 1.
It worked on my TP so I assume it'll work on you Diamond to.
Cheers,
/Cacti
Click to expand...
Click to collapse
Just tested on Topaz and it works like a charm
So simple
Cheers for that mate
Take care
actually tested it and it's wrong
what it does is disables events, reminders and sets notifications to silent
maybe it works on Leo but not on Topaz
Does anyone have a solution for The hardware rocker on devices such as the Wizard for Opal Volume Control ? Im so close to banging my head against the wall. Any advice/help would be appreciated
bump
Would also like to be able to assign volume control to a hardware key. Any takers on how this is done?
----------bump----------
Anyone? at all? please? *starts to cry*
Anyway, this would be great! It is the only thing missing from my kaiser using the Opal roms. Especially in audio manager where the only way to change the volume is by tapping the volume icon in the start bar. The scroll wheel does nothing at all!
So I would love to see someone take a try at this!
C'mon some help please 608 views not one reply. Is this something that can not be done? Is there not a way to make a shortcut to the volume control so you can launch it similar to S2U2-VC or Setvolume? Please any type of reply would be helpfull.
bump again
I was hoping for an answer to this too but in my quest to find this answer. I came up with a much simpler solution (for me anyway).
I love A_C's S2U2 application and several versions back, he implemented a volume control screen which looks JUST like HTC's except that both volume bars are on one page. (Myself, I think HTC ripped the idea from A_C but made it with 2 tabs so it looked different enough.) What I ended up doing was using that volume control module instead of HTC's since the S2U2 one CAN be bound to a hardware key since it's a shortcut that sits in your start menu.
all very true, i remember trying it right before the HTC version came out, and i found them quite similiar. The only thing is, I do not use s2u2 anymore and it would be nice to have it built into the stock opal manager as that is what comes up when you change volume in the audio manager and the system icon...
There is a way to create a shortcut that will call an IN MEMORY address, I just have no luck getting the correct address for the Volume Control
I use smartskey and the volume up/down key on my Wizard works in Opal Volume Control
dEf0RM said:
I use smartskey and the volume up/down key on my Wizard works in Opal Volume Control
Click to expand...
Click to collapse
I have smartskey cooked into WizFlo and it just doesnt work when Manilla is active which is super annoying
cornelha said:
I have smartskey cooked into WizFlo and it just doesnt work when Manilla is active which is super annoying
Click to expand...
Click to collapse
Hi,
Boto has given a smartskey.ini file which enables opal volume control to work with volume slider.
I did not tested because wizard's volume slider is damaged. Can you test it. I have Attached the file below
Thanks
The HTC volume control is sexy and everything but it's not as usable for me as the default Windows Mobile volume bubble that I've been using for years.
When I press the hardware volume buttons I want to set the volume for the whole device (SMS & email notifications, music playback etc) but the HTC screen always defaults to the ring volume (which I never need to adjust).
The WM volume bubble on my Elf was always focussed on the System slider and I'd like to drop the HTC screen in favour of it, assuming it works the same way. Anybody know of a way of doing this?
Its al over this forum
Try searching the forum next time!
But for now, change the following registry setting:
HKEY_LOCAL_MACHINE \ SOFTWARE \ HTC \ VolumeOverlay \
change "DefaultPage" to 0
Oops Sorry
I've been reading the Blackstone forum for a few months and didn't notice any threads on this.
I'll try your solution. Thanks.
Hmm. I've changed that reg. value and it hasn't made any difference. Is that a Blackstone-specific solution or is it from the Diamond or Pro forums?
I've checked the reg. value after a soft-reset and it's still set to zero but the HTC volume screen still takes over.
I'm also pissed off the HTC customizations. I want a WM6.1 Professional, not any customizations at all.
Is there a way to disable them all?
There is a way, try this CAB
If you don't like just unistall! Using it for myself.
Koffein Schluck said:
There is a way, try this CAB
If you don't like just unistall! Using it for myself.
Click to expand...
Click to collapse
That's excellent - it has disabled the HTC volume control on my HD. Thank you very much.
Good, but you lose the 10 step control over volume (was only available on the system volume anyway).
Koffein Schluck said:
There is a way, try this CAB
If you don't like just unistall! Using it for myself.
Click to expand...
Click to collapse
Nice one!
HTC volume control is not my cup of tea.
This seemed to be working fine until a soft reset when the device reverted back to the HD volume slider. Also the CAB doesn't seem to actually install anywhere. It doesn't show up in the remove programs list.
@Koffein Schluck: Thank you for this nice cab-file! I also dislike the new HTC volume control.
@Anfloyd: I don't have these problems. The cab appears in the remove programs list and I have the classic volume control after a soft reset.
Anfloyd said:
This seemed to be working fine until a soft reset when the device reverted back to the HD volume slider. Also the CAB doesn't seem to actually install anywhere. It doesn't show up in the remove programs list.
Click to expand...
Click to collapse
works for me on the HD without problems, even after Soft Reset....
regards jan
a good one
here is a good one with ring and system just installed on the latest flash touch-it 5.1
ftp://ftp.minftp.myftp.org/XperiaX1i/Touch-IT_Blackstone/Touch-IT_Blackstone_volumecontrol.cab
yet another one
This shareware app enables the WM volume and yet it extends it to be finger friendly, plus other innovative features.
Cheers
Have been modifying TP2 with many registry changes etc. Running WM6.1
However, seem to have "lost" part of the standard dialer and have trolled through the forums trying to find what files and .dll are being used by the DEFAULT dialler.
The HTC dialler works fine but I do not like it, so when swapping back to the default dialer, the buttons and keys are there, but where the list of previous numbers should be is just a grey area with no entries. Selecting any area WILL bring up the call record as normal.
I must have deleted\edited\corrupted something..........but even looking through back-ups, can not find a clue!
Otherwise, any clues on JUST a plug in dialer (everything I find seems to be a full package with today and other stuff) - I like the dialler on the TYTN2 - both for size and colour and am trying to replicate this if possible.
Colours and size are good for tapping when driving as here in UK must NOT hold a phone as illegal!
ANy clues on files/which registry keys hold the colours for the HTC keypad etc. would be useful as doesn't seem to be HKLM\security\phone\skin
As loads of views and no answers, transferring to general questions
JR44 said:
Have been modifying TP2 with many registry changes etc. Running WM6.1
However, seem to have "lost" part of the standard dialer and have trolled through the forums trying to find what files and .dll are being used by the DEFAULT dialler.
The HTC dialler works fine but I do not like it, so when swapping back to the default dialer, the buttons and keys are there, but where the list of previous numbers should be is just a grey area with no entries. Selecting any area WILL bring up the call record as normal.
I must have deleted\edited\corrupted something..........but even looking through back-ups, can not find a clue!
Otherwise, any clues on JUST a plug in dialer (everything I find seems to be a full package with today and other stuff) - I like the dialler on the TYTN2 - both for size and colour and am trying to replicate this if possible.
Colours and size are good for tapping when driving as here in UK must NOT hold a phone as illegal!
ANy clues on files/which registry keys hold the colours for the HTC keypad etc. would be useful as doesn't seem to be HKLM\security\phone\skin
Click to expand...
Click to collapse