Sound when you change your volume - Touch Diamond, MDA Compact IV Themes and Apps

Maybe it's just me but the sound when i change the volume of the diamond freaks me out... especially when i'm listening music with earplugs and i just wanna do it a little more louder it disturbs me.
Is there a way to make them go away? Maybe just erase the soundfiles? If yes, can somebody please tell me where i can find them?
pls help me

You can disable the 'sound beeps while changing volume' by using Diamond Tweak.

Thanks a lot for helping me fixing my problem...
I installed diamond tweak already but i did not find a tweak for fixing my prob.
I have Installed the 0.5 version is there a newer one? I couldn't find one in the internet so far...

Tweak # 1.5 in Diamond Tweak.
But it is only for in call beeps as the description says. Still you can try it. Sorry if it doesnt help.

still have this issue on Wm6.5 energyrom phoenix 2
I cannot disable the volume change sound.
Tried looking for wav files, tried using advancedtweak (And other tweak programs).
I can only get them to shut off when in a call. I want them to be disabled forever. Any solution ideas

Same here. I have looked in the registry and I can't find anything about the volume beep not incall.

i was looking for the same thing and the only solution i found was to install another volume control app
S2U2 includes a silent volume control that works perfectly

Hi,
When browsing the HD2 forums (I'm gonna get one in a few days, yay!) I found this:
75. Disable Beeps When Altering Volume
When you press the volume key you getting annoying beeps. This tweak allows to change the volume silently without the beeps.
HKCU\ControlPanel\Volume\Mute Change from 3 to 1.
It worked on my TP so I assume it'll work on you Diamond to.
Cheers,
/Cacti

le_cactus said:
Hi,
When browsing the HD2 forums (I'm gonna get one in a few days, yay!) I found this:
75. Disable Beeps When Altering Volume
When you press the volume key you getting annoying beeps. This tweak allows to change the volume silently without the beeps.
HKCU\ControlPanel\Volume\Mute Change from 3 to 1.
It worked on my TP so I assume it'll work on you Diamond to.
Cheers,
/Cacti
Click to expand...
Click to collapse
Just tested on Topaz and it works like a charm
So simple
Cheers for that mate
Take care

actually tested it and it's wrong
what it does is disables events, reminders and sets notifications to silent
maybe it works on Leo but not on Topaz

Related

AWESOME: Vibrate feedback on phone key press

faysel, over at the modaco forum has come up with this awesome cab that lets you get vibrating feedback everytime you press one of the number buttons in the phone. The vibration lasts as long (or as short!) as you press the button.
Great cab, very useful for knowing whether you have indeed pressed the key.
This is great, thank you. I used to use Redial with vibrating effect on my PDA2k (WM2003SE) but this is even better
don't expect a long battery life with that! :wink:
acer175 said:
don't expect a long battery life with that! :wink:
Click to expand...
Click to collapse
Are you kidding me? I mean what kind of a battery effect you think it will have? Its such a small vibe that I don't expect to have ANY noticable effect on battery life. First it vibes only when you dial phone numbers (how many a day? 5? 6? even 20? Its still nothing. Second, receiving a phone call, that is the vibration during it, probably uses more power than this addition will use in 20 calls...
I really disagree... :wink:
This is a great little program!
I don't like it because if you tap fast, it wont vibrate. In addition to this, there is a serious problem with the dialer after you uninstall it.
So I had to reinstall it and now i'm stuck with it
My rating : 0 (ZERO)
@Andrew_sh: use the attached cab to get the keytones back, then uncheck from the sounds and notifications settings to get a working silent dialer back.
@Koksie
Thanks for trying but unfortunately it won't fix it.
When I press the button , the tone will sound but if I press it again shortly after, it lags and makes a higher pitched tone.
Sorry to hear it didn't work Andrew, I have no idea how to fix this. I use the vibrate and am happy with it, on my Magician going back with this cab worked fine, I have no idea what is causing this in your Prophet. I hope you can figure it out and correct it, good luck with that.
andrew_sh said:
@Koksie
Thanks for trying but unfortunately it won't fix it.
When I press the button , the tone will sound but if I press it again shortly after, it lags and makes a higher pitched tone.
Click to expand...
Click to collapse
Try this, it's a saved registry string of the original keys that the .cab modified. Hopefully i'll work for you without messing up anything else.
I had to rename the file vibrate off.reg.exe to ba able to attach it. Just delete the .exe part ie. vibrate off.reg
this is a technical forum
can someone paste here the registry keys which are being modified by this vibrate utility?
thanks
Using a registry editor navigate to the following keys and follow the directions. Do this for each of the listed registy keys
1. Rename Standard DWORD parameter "Sound" to "Sound1"
2. Create new String Parameter "Sound"
3. Assign value *vibrate* to this new parameter.
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf#
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf*
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf0
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf1
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf2
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf3
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf4
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf5
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf6
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf7
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf8
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf9
this mod doesn't work fine for me, I noticed the vibrate a few time but it's not working everytime I tap on the Keypad...
Strange :?
Although the mod works fine, I had big troubles removing it again.
After removing the mod with the supplied cab file any keys pressed in the dialer would lag and emmit a short beep.
i finally succeeded in removing it manually:
First reinstall the vibrate mod again so that the keys vibrated again when pressed.
Then go into the registery keys posted above, deleted the parameter "Sound" and then rename the parameter "Sound1" back to "Sound".
Do this for all Dtmf keys.
Thats all
its true if you tap fast it wont vibrate at all.. very annoying. is there a way to make it vibrate for a set lenght.. much like the dtmf tones used to be.. no matter how long or short i press..
that would be very useful.
regards,
tom
bk227865 said:
Although the mod works fine, I had big troubles removing it again.
After removing the mod with the supplied cab file any keys pressed in the dialer would lag and emmit a short beep.
i finally succeeded in removing it manually:
First reinstall the vibrate mod again so that the keys vibrated again when pressed.
Then go into the registery keys posted above, deleted the parameter "Sound" and then rename the parameter "Sound1" back to "Sound".
Do this for all Dtmf keys.
Thats all
Click to expand...
Click to collapse
I used this mod until I found out that I couldn't turn off vibrate on incoming calls anymore. I can't be sure that they are related, but the timing was right. The next time I did a ROM upgrade I didn't install it again. I use speed dial with Photo Contacts Pro anyway.
krale said:
faysel, over at the modaco forum has come up with this awesome cab that lets you get vibrating feedback everytime you press one of the number buttons in the phone. The vibration lasts as long (or as short!) as you press the button.
Great cab, very useful for knowing whether you have indeed pressed the key.
Click to expand...
Click to collapse
Never mind - problem fixed
Not installing on Tytn / Black2.5
"Installation unsuccesfull, Not meant for this device"
Did anybody have more luck? How?
I don't like this
...the vibrate just doesn't trigger some of the time, which means you can't rely on tactile feedback on dialling, which makes it fairly useless. Sorry...
buhahahaha
*buzz* *buzz* *buzz*
works fine on my Jamin. Great app

Opal Volume Control - Hardware key

Does anyone have a solution for The hardware rocker on devices such as the Wizard for Opal Volume Control ? Im so close to banging my head against the wall. Any advice/help would be appreciated
bump
Would also like to be able to assign volume control to a hardware key. Any takers on how this is done?
----------bump----------
Anyone? at all? please? *starts to cry*
Anyway, this would be great! It is the only thing missing from my kaiser using the Opal roms. Especially in audio manager where the only way to change the volume is by tapping the volume icon in the start bar. The scroll wheel does nothing at all!
So I would love to see someone take a try at this!
C'mon some help please 608 views not one reply. Is this something that can not be done? Is there not a way to make a shortcut to the volume control so you can launch it similar to S2U2-VC or Setvolume? Please any type of reply would be helpfull.
bump again
I was hoping for an answer to this too but in my quest to find this answer. I came up with a much simpler solution (for me anyway).
I love A_C's S2U2 application and several versions back, he implemented a volume control screen which looks JUST like HTC's except that both volume bars are on one page. (Myself, I think HTC ripped the idea from A_C but made it with 2 tabs so it looked different enough.) What I ended up doing was using that volume control module instead of HTC's since the S2U2 one CAN be bound to a hardware key since it's a shortcut that sits in your start menu.
all very true, i remember trying it right before the HTC version came out, and i found them quite similiar. The only thing is, I do not use s2u2 anymore and it would be nice to have it built into the stock opal manager as that is what comes up when you change volume in the audio manager and the system icon...
There is a way to create a shortcut that will call an IN MEMORY address, I just have no luck getting the correct address for the Volume Control
I use smartskey and the volume up/down key on my Wizard works in Opal Volume Control
dEf0RM said:
I use smartskey and the volume up/down key on my Wizard works in Opal Volume Control
Click to expand...
Click to collapse
I have smartskey cooked into WizFlo and it just doesnt work when Manilla is active which is super annoying
cornelha said:
I have smartskey cooked into WizFlo and it just doesnt work when Manilla is active which is super annoying
Click to expand...
Click to collapse
Hi,
Boto has given a smartskey.ini file which enables opal volume control to work with volume slider.
I did not tested because wizard's volume slider is damaged. Can you test it. I have Attached the file below
Thanks

[REQ] Volume Profile Tab

I think I might have seen one of these in the forums but I have searched and cannot find it anywhere.
It was a new tab for volume profile switching, to switch between normal, vibrate and silent.
Anyone able to help?
Easy way 4 me is tab on volume button and vote between normal, vibrate and silent.
But I search a little, little, little tool/app to switch in today screen (orignal Windows) between self-provided phone profils (to harmonise with TF3D & Secondtoday).
I found Apps as phoneWeaver, phoneAlarm and Spb phone suite but all Progs are to big....
Yes, I know I've seen this tab somewhere on these forums but I can't find it.
I was hoping someone would know...
I use V_Vibrate to change between sound and vibrate, mapped to a long press of the volume down button.
the_scotsman said:
I think I might have seen one of these in the forums but I have searched and cannot find it anywhere.
It was a new tab for volume profile switching, to switch between normal, vibrate and silent.
Anyone able to help?
Click to expand...
Click to collapse
I don't think its in .cab format, but im not sure how to add or replace manilla files in the windows directory.
http://forum.xda-developers.com/showpost.php?p=2662084&postcount=42
abovelegit said:
I don't think its in .cab format, but im not sure how to add or replace manilla files in the windows directory.
http://forum.xda-developers.com/showpost.php?p=2662084&postcount=42
Click to expand...
Click to collapse
That's what I saw!! Thanks a lot!
It at least gives me a starting point
Did you get it to work?
Unfortunately not. I PM'd the guy about it, but he never replied

How do I change to the default WM volume control?

The HTC volume control is sexy and everything but it's not as usable for me as the default Windows Mobile volume bubble that I've been using for years.
When I press the hardware volume buttons I want to set the volume for the whole device (SMS & email notifications, music playback etc) but the HTC screen always defaults to the ring volume (which I never need to adjust).
The WM volume bubble on my Elf was always focussed on the System slider and I'd like to drop the HTC screen in favour of it, assuming it works the same way. Anybody know of a way of doing this?
Its al over this forum
Try searching the forum next time!
But for now, change the following registry setting:
HKEY_LOCAL_MACHINE \ SOFTWARE \ HTC \ VolumeOverlay \
change "DefaultPage" to 0
Oops Sorry
I've been reading the Blackstone forum for a few months and didn't notice any threads on this.
I'll try your solution. Thanks.
Hmm. I've changed that reg. value and it hasn't made any difference. Is that a Blackstone-specific solution or is it from the Diamond or Pro forums?
I've checked the reg. value after a soft-reset and it's still set to zero but the HTC volume screen still takes over.
I'm also pissed off the HTC customizations. I want a WM6.1 Professional, not any customizations at all.
Is there a way to disable them all?
There is a way, try this CAB
If you don't like just unistall! Using it for myself.
Koffein Schluck said:
There is a way, try this CAB
If you don't like just unistall! Using it for myself.
Click to expand...
Click to collapse
That's excellent - it has disabled the HTC volume control on my HD. Thank you very much.
Good, but you lose the 10 step control over volume (was only available on the system volume anyway).
Koffein Schluck said:
There is a way, try this CAB
If you don't like just unistall! Using it for myself.
Click to expand...
Click to collapse
Nice one!
HTC volume control is not my cup of tea.
This seemed to be working fine until a soft reset when the device reverted back to the HD volume slider. Also the CAB doesn't seem to actually install anywhere. It doesn't show up in the remove programs list.
@Koffein Schluck: Thank you for this nice cab-file! I also dislike the new HTC volume control.
@Anfloyd: I don't have these problems. The cab appears in the remove programs list and I have the classic volume control after a soft reset.
Anfloyd said:
This seemed to be working fine until a soft reset when the device reverted back to the HD volume slider. Also the CAB doesn't seem to actually install anywhere. It doesn't show up in the remove programs list.
Click to expand...
Click to collapse
works for me on the HD without problems, even after Soft Reset....
regards jan
a good one
here is a good one with ring and system just installed on the latest flash touch-it 5.1
ftp://ftp.minftp.myftp.org/XperiaX1i/Touch-IT_Blackstone/Touch-IT_Blackstone_volumecontrol.cab
yet another one
This shareware app enables the WM volume and yet it extends it to be finger friendly, plus other innovative features.
Cheers

WM 6.5 volume control issues

I recently flashed my Cruise with PDAVIET ROM WM 6.5 Build 21202.5.0.0 and wanted to get the opal/diamond volume control on it. I installed one cab which didn't work and after i uninstalled the volume slider now scrolls like the wheel what did i do and how can i fix it?
The same prob...
Jabba1701 said:
I recently flashed my Cruise with PDAVIET ROM WM 6.5 Build 21202.5.0.0 and wanted to get the opal/diamond volume control on it. I installed one cab which didn't work and after i uninstalled the volume slider now scrolls like the wheel what did i do and how can i fix it?
Click to expand...
Click to collapse
Yes i have this prob to...
i also cant tap the little speaker to get the volume. i did notice that in the buttons setting i have to extra "button" entries that i assume are the volume slider. can no-one help out?
edit: Well i am sure this is not the way you are meant to do it, but....
i installed the cab from here: http://freewareppc.com/download/utilities/setvolume.shtml and assigned one of the extra butons to the link it created in the start menu. the other was set to scroll down, but not sure if that matters or not. it seemd to work fine now. hope that help you Alexander-Vogt1
edit2:
not that great at fixing it actually. it only works if that app is running in the background well it's a temporary fix for now at least.
OK....
Jabba1701 said:
i also cant tap the little speaker to get the volume. i did notice that in the buttons setting i have to extra "button" entries that i assume are the volume slider. can no-one help out?
Ok...thanks for it....i will test it....
Click to expand...
Click to collapse
why don't you just hardreset
to get original settings back?
Olioaglio
looks like i'll have to, ut i would still like to use one of the HTC volume controls instead of the default WM one. But if this is going happen each time i install one...
OK so i have done a hard reset... all back to normal now. Is there any of the HTC volume control apps that i can use with WM 6.5 without breaking it?
Jabba1701 said:
... Is there any of the HTC volume control apps that i can use with WM 6.5 without breaking it?
Click to expand...
Click to collapse
Volumex maybe

Categories

Resources