Related
Where can I check if my flash counter is set to 0 after use Triangle Away
Turn off your phone.. then holding home and volume down, turn on the phone. It will enter Odin/download mode and display this information for you. This video may also help: http://www.androidrootz.com/2013/06...alaxy-s4-gt-i505-m919-i337-international.html
genô00 said:
Where can I check if my flash counter is set to 0 after use Triangle Away
Click to expand...
Click to collapse
In Triangle Away the actual counter is visible, not in downloadmode.
Dear all,
I have a similar question.
I've rooted my i9500. I wonder if there is any way to make it as original?
I mean i want to set flash caunter 0 in case of any guarantee situation.
[email protected] said:
Dear all,
I have a similar question.
I've rooted my i9500. I wonder if there is any way to make it as original?
I mean i want to set flash caunter 0 in case of any guarantee situation.
Click to expand...
Click to collapse
TriangleAway resets flash counter
BLSbeerzerker said:
TriangleAway resets flash counter
Click to expand...
Click to collapse
Not on I9500, i believe there's no way yet to reset the counter on I9500
[email protected] said:
Dear all,
I have a similar question.
I've rooted my i9500. I wonder if there is any way to make it as original?
I mean i want to set flash caunter 0 in case of any guarantee situation.
Click to expand...
Click to collapse
As of now, there is no way to reset the flash counter on I9500
I hope someone can find a way to reset everyhing to get warranty back.
hi friend i am facing some bug in my device after kitkat update g4 and i thought it get fix in next version but not in nh3 too. Bug are in home lock screen walpaer dnt get change in ripple effect
And while using sim 2 only by disabling sim 1 and req ussd code and make a call it says mobile network nt availble.
have ur facing similar problem like it plese do share.
Get Fixed link : http://forum.xda-developers.com/gal...tkat-4-4-2-smg7102-ins-grand-2-t2851126/page2
Bro try clearing cache in recovery mode.
Even if the problem exits try reinstalling the Firmware using odin
First thing try interchanging the sims and later try factory reset and finally if none works Flash the firrmware
Rahul10 said:
Bro try clearing cache in recovery mode.
Even if the problem exits try reinstalling the Firmware using odin
Click to expand...
Click to collapse
Ok i done it .but no any workd ?
Sanjuujosephh said:
First thing try interchanging the sims and later try factory reset and finally if none works Flash the firrmware
Click to expand...
Click to collapse
I done no any change.. any one facing problem like this?
abilash10 said:
I done no any change.. any one facing problem like this?
Click to expand...
Click to collapse
Try reinstalling the Firmware or try factory resting....
ok bro
Rahul10 said:
Try reinstalling the Firmware or try factory resting....
Click to expand...
Click to collapse
ok bro.. and how may i reset that count ?? how much time it unroot and root ?make it to zero.
abilash10 said:
ok bro.. and how may i reset that count ?? how much time it unroot and root ?make it to zero.
Click to expand...
Click to collapse
Sry bro i didn't get you.?
Rahul10 said:
Sry bro i didn't get you.?
Click to expand...
Click to collapse
I mean how may i get my warranty back by making binary zero? Triangle away is aplicable?
abilash10 said:
I mean how may i get my warranty back by making binary zero? Triangle away is aplicable?
Click to expand...
Click to collapse
You don't need to use Triangle Away now... You must press three buttons (home + power + volume DOWN) until a screen with a triangle shows, you press volume up to continue, then plug in your phone via USB (Of course to your PC) after the "Downloading..." screen appears.
Assuming you already have all drivers and stuff to listen from your USB connection, you then have to open Odin program to flash the firmware file you used to install KitKat. That's how you re-install your firmware.
-------------------------------------------------------------------------------
To reset cache partition, you hold down home, power and volume UP this time, this is for entering recovery mode, when you see the blue "Recovery botting" at the top you can release all buttons now, then you go down to "Reset cache partition" and make sure you don't select "Factory reset" if you see a long list of "No no no no no no" then you're in the wrong area, and you MUST go back again.
abilash10 said:
I mean how may i get my warranty back by making binary zero? Triangle away is aplicable?
Click to expand...
Click to collapse
Our Grand 2 doesn't have a KNOX WARRANTY VOID bit. Don't worry.
But this will be important if rooting a S4 or a Note 3 or above.
WaseemAlkurdi said:
Our Grand 2 doesn't have a KNOX WARRANTY VOID bit. Don't worry.
But this will be important if rooting a S4 or a Note 3 or above.
Click to expand...
Click to collapse
Ok thks for this.
WaseemAlkurdi said:
Our Grand 2 doesn't have a KNOX WARRANTY VOID bit. Don't worry.
But this will be important if rooting a S4 or a Note 3 or above.
Click to expand...
Click to collapse
Then why does we have this in our device?
And why do we have to disable knox during the root process
Rahul10 said:
Then why does we have this in our device?
And why do we have to disable knox during the root process
Click to expand...
Click to collapse
hi friend yes in our device there is no any warranty void count.. it is in s4 .s4 mini note 3 etc.. rom ..
Bug get fixed in new nh6
bug fixed in nh6
Finally bug get fixed in nh6
Rahul10 said:
Then why does we have this in our device?
And why do we have to disable knox during the root process
Click to expand...
Click to collapse
Because it shows annoying notifications saying:
Unauthorized changes have been made. Reboot to undo them.
Nothing happens after a reboot.
KNOX*.apk are the ones responsible for this.
Hello everybody
I have a question
When we make root or install twrp the counter know write OX1 but where this number is write ? in the bootloader ? In the part of system?
So i think many persons thins to this solution ( if it's possible ) but if we take the file where it's located the counter , it's possible to send to rooted phone for have a counter with OX0 or not?
If we flash a bootloader of someone who don't have rooted the phone?
I hope someone understand me ^^ Sorry for my bad english i am french and i don't have many vocabulary for android phone in english x)
Exemple : The file of my friends(yoyo) "system.sys" have the counter knox to OX0 or " bootloader.img" have the counter knox to OXO , so i take the file and i copy the files of yoyo to my phone rooted
Thanks
Its not a file, its a physical fuse or trace on the mainboard that gets blown out when you root the phone. Next time the phone starts it tries to send a signal through that fuse and notices it can't, therefore the phone was rooted and knox shows 0x1.
peachpuff said:
Its not a file, its a physical fuse or trace on the mainboard that gets blown out when you root the phone. Next time the phone starts it tries to send a signal through that fuse and notices it can't, therefore the phone was rooted and knox shows 0x1.
Click to expand...
Click to collapse
Ohh okay thanks for the explication !!
So i come to the mainboard and i change the fuse ?
Its probably underneath the cpu or on the cpu... good luck.
But why at the time with triangle away it was possible to reset the counter?
It was software?
quadeur06 said:
But why at the time with triangle away it was possible to reset the counter?
It was software?
Click to expand...
Click to collapse
In the past it was possible to reset the knox counter because der wasn't any physical part which got destroyed. The S6 was the first phone with that pull**** haha
A physical trace on the mainboard? Nah! I reading about people who sent their knox tripped S7s to Samsung for repair and got back same phone with knox reset to 0x0
TRoN_1 said:
A physical trace on the mainboard? Nah! I reading about people who sent their knox tripped S7s to Samsung for repair and got back same phone with knox reset to 0x0
Click to expand...
Click to collapse
Most likely the mainboard was replaced.
peachpuff said:
Most likely the mainboard was replaced.
Click to expand...
Click to collapse
Same phone should be same IMEI I think
Tron have reason
In france Samsung have a software for reset the knox counter
I know that because i call samsung to know more about the warranty
my device is showing failed to find device partition on my nokia 6 (ta-1021)
Emmykay223 said:
my device is showing failed to find device partition on my nokia 6 (ta-1021)
Click to expand...
Click to collapse
I'm having the same issue on TA-1000.
tvi_vladutz said:
I'm having the same issue on TA-1000.
Click to expand...
Click to collapse
That's why twrp is not booting on some devices cuz it can't find partitions
Emmykay223 said:
That's why twrp is not booting on some devices cuz it can't find partitions
Click to expand...
Click to collapse
And what we should do to rezolve that?
tvi_vladutz said:
And what we should do to rezolve that?
Click to expand...
Click to collapse
Is your bootloader unlocked?
I don't know... ?
tvi_vladutz said:
I don't know... ?
Click to expand...
Click to collapse
Check it in developer options if you have enabled it
Emmykay223 said:
Check it in developer options if you have enabled it
Click to expand...
Click to collapse
Is not and it's greyed out, I can't enable.
tvi_vladutz said:
Is not and it's greyed out, I can't enable.
Click to expand...
Click to collapse
Can u upload screenshot here?
Sure
tvi_vladutz said:
Sure
Click to expand...
Click to collapse
I think they will fix it on new update hope soo
But what I can do about that error in the recovery?
tvi_vladutz said:
But what I can do about that error in the recovery?
Click to expand...
Click to collapse
I was talking about recovery error. Or else you should downgrade to oreo again.
Need the solution --- failed to find device partition on my Nokia 6 TA-1000
Kishor008 said:
Need the solution --- failed to find device partition on my Nokia 6 TA-1000
Click to expand...
Click to collapse
Backup your data and flash nb0 firmware via ost with check on erase data option.
sir my nokia 6 with TA-1021 is not opening or starting stucks on nokia logo and while opening hard reset option by volume buttons there a line written ( failed to find device for partion )
I have my imei in 0 and I do not have a backup nor can I fix it from the Shiell, My Doubt is
If I have my cell phone enter the FULL BRICK and then restore it, is it possible to recover my original IMEIs?
that is, if I format the logical card and then install the so, is it possible that it works?
alwaysstrongs said:
I have my imei in 0 and I do not have a backup nor can I fix it from the Shiell, My Doubt is
If I have my cell phone enter the FULL BRICK and then restore it, is it possible to recover my original IMEIs?
that is, if I format the logical card and then install the so, is it possible that it works?
Click to expand...
Click to collapse
You don't need to do anything, just update your device to oreo and it will fix your IMEI problem.
riyan65 said:
You don't need to do anything, just update your device to oreo and it will fix your IMEI problem.
Click to expand...
Click to collapse
not found
alwaysstrongs said:
not found
Click to expand...
Click to collapse
Here is the link for oreo firmware with procedure.
https://forum.xda-developers.com/g5...stboot-flash-stock-oreo-t3848433/post77752702