[Q] [HELP] USB Port broken(???) - XPERIA X8 General

Hi people, i have an xperia x8 since april, 2011. i used it a lot but now my port is failing, first i thought it was the usb cable, and bought a new one so i could charge it, but now it only charges in one position and it's really hard to do it , so can somebody tell me how to fix the phone i don't want it broken before the year of use, and i can't install a new kernel cause i cant connect it to the PC. Maybe you can give me a GUIDE for fixing it (???)
Sorry for my ugly english, i'm from Argentina

Related

[HELP!] Mini USB Pushed In

Hello,
I wonder if anyone can help me...
I went to plug in my Mini USB charger into the Wizard last night to find the actual port had been pushed in, so i can no longer charge it... is this is a common fault and how can I fix this?
Any suggestions, or advice would be great!
Thanks everyone,
Liam
I got the same problem
T Mobile refused to repair it but have sent me a new one
I am still wanting to repair the phone so my dad can have it....
Where can i get a new USB port from without sending it off to anyone to fix it...
intheloft said:
I got the same problem
T Mobile refused to repair it but have sent me a new one
I am still wanting to repair the phone so my dad can have it....
Where can i get a new USB port from without sending it off to anyone to fix it...
Click to expand...
Click to collapse
Try the ebay you'll get it there
Cheers
Try ebay...and read the linky in my siggy for any other suggestions/help.

Problem whit my mini usb on my phone.

Hello all, found out my new Magic phone have a anoying problem.
The problem started when i found out i only got music on the left side on my headsett. if i press the usb cabel up abit i get music on both sides, i was thinking that it could be the mini usb - 3.5mm cabel but found out that i also have problem conecting the phone to the computer. The phone charges whitout problems but mounting the phone is a problem. im able to mount the phone but it only stay mounted for a few sec.
Tryed whit 2 computers and whit 4 usb - usb mini cabels.
So i guess i have to send the phone back to the shop to get this repared, but i use Hero rom atm. Whould that be a problem whit warrenty? should i restore the phone to factory settings before i send it in? cant understand why another rom could "harm" a hardware but i can never be sure.
Thanks for ANY advice.
same problem
could anyone help please!!
what would need to do to send it to htc to repair.

The device doesn't support the USB headset. Please remove it.

Hello All,
I have enjoyed reading other threads to find out more about my HTC 3333.
I have had my Touch 2 for a couple of months now, however lately, and quite frequently, I receive this annoying message 'the device doesnt support the USB headset. Please remove it.' There is nothing attached to the USP port, yet this message appears. I have used the USB port for synching with my laptop and have used the factory supplied cable as well as a standard mini USB cable.
Has anyone else experienced this problem?
Your valued opinions and advice would be appreciated
I have never seen this on my phone. It could be rom bug, or on the other hand it could be from a program you recently installed.
I thought a busted rom might be the problem so uploaded the latest rom from the HTC site. After installing the latest rom from HTC all the programmes and files on the phone were wiped but the message keeps appearing... I figure now I might have done some physical damage to the USB port.. I am not looking forward to sending my phone to HTC care for repair..
Even my HTC got the same issue. I think, as we had given with 3.5mm port the USB headset has disable.
Have you noticed any other mobile working with USB ? I dont think so ......
I found on another thread, another HTC user had a similar problem. The solution they said was to clean out the USB port because it had filled up with lint and other junk from their pocket. I just cleaned it as best I could with a soft bristled brush and will wait and see if that has helped reduce frequency of the warning sign popping up! It's a minor problem but it's enough to drive you mad! :
If this doesnt help, then for sure its a USB problem. You might wanna send it to repair service or use only bluetooth.
I have a brand new phone, which also gives this message. I did assume it was due to the presence of the 3.5mm port.
I had same problem a couple months ago. You should give the phone your technical service because there is a problem on your mainboard
I think the problem may only be with the USB cable you are using. I had this warning with one cable I bought in China, but not with the original cable. My original cable has just died so I pulled out the cable from china and the warning comes back.

[HW] usb and wifi broken

Hello,
I don't know if there is still some people here but I expose my problem.
As I have a Desire HD for more than a year, I wanted to give my magic to my sister but I also wanted to flash a new rom because the old CM did her time on this phone.
The problem is that the wifi and the usb are broken as I can't even charge the battery simply by plugging the usb cable. And with no electricity, there will be no file transfer.
Also, il work on a computer with no sdcard slot.
So there are 2 possibilities :
- I download everything with 3G (this should work with apps, but not for a rom)
- Repair the usb chip on the cellphone, and if possible the wi-fi too.
The second is my favorite, but is anyone know where to start this manipulation ?
(I have some skills in electronic and soldering).
Thanks for future replies

USB Issue : charging over USB, Device not detecting by PC, OTG not working, slow char

Its been 2 yrs, i am facing this issue it started in rainy season
but last year it automatically got fixed (it was summer then) again started facing same issue (from rainy season):crying:
i tried (I am still using OG usb cable and Adapter so for god's sake don't tell me to use OG asus adapter and USB cable):
1. Flashing ROMs from RR(Nougat and MM) by tank, Borets ROM by Borets24 to Montana ROM
2. changed Micro USB port on my device.
3. reinstalled drivers on My PC.
4. visited Service Center (they are saying to change motherboard)
5. changing mode from MTP to Charge only and vice versa.
6. tried other usb cable and charger (from XIAOMI standard 10 Watt).
so tell me what i should do now ?
Usb not detected
Same same issue I have been also faced... All possible setup tried but failed to detect on pc, just charging. How to fix it? Thank you
I changed the USB socket...
Solved...
Changing port didn't helped me
fisrt sorry for my bad english
i faced this issue yesterday when i change my battery to my mom cel (both zf5) because her cel battery is dead. anyway when i connect on pc nothing happens so i remember to look flat cable(or SIM cable) to move. i read long time ago that if you drop your phone maybe the cable move a little little bit and its enough to won't be reconized anymore by pc and maybe cause erros on SIM1. i open again and reconnect the cable on motherboard and southboard and it works again. check it or search for it or how you do it. i hope it helps. good lucky
Same issue otg and usb cable not working only charging.
Replace sim tray assembley
Hi, hope this will solve your problem.
I'm facing the same problem with my zenfone 5. and alredy replace second mother board in my phone(micro usb assambley) and the problem still exsisted.
I found a solution in a zentalk forum where there are many people face the same problem as ours, the phone refuse tu connect to mtp,ptp or any usb debugging wheater its abd fastboot or even usb on-the-go.
the solution was replacing the sim tray assambley, where the ribbon connect motherboard 1(main) to motheboard 2(micro usb assmbley).
It have worked for me, the only regret that I have was, I have buchered the new sim sim tray slots during replacemen(those thing are super fragile) but now my phone can conect to pc and recodnise usb OTG.
it may not worked for your phone but it worth a try of you are willing to spend some money to buy the sim tray assmbley.
here I will include a picture of my replaced parts. Parts makked with number 2 need replacement.
be very careful when replacing the sim tray they are super fragile.
creddit to zentalk user for pointing this problem.
sorry for my rubbish english.

Categories

Resources