Database Users

Dropped my N1, going to strip it soon!

Hey all.
Accidentally dropped my N1 today and funnerly enough i dropped it on carpet however its kitchen floor and hard... only from a distance of 3ft id say.
Now i cant hear people when they phone me, they hear me fine.
Camera doesnt work.
LED doesnt work.
Not good =(
Theres no signs of damage visually looking at it.
So can only leave 1 thing to do...
Going to strip it down see if i can find out whats wrong if anything loose.
What people think?

Did you ask if you can get warranty on it?

You might be able to get it repaired under warranty. Even if unlocked, if you are nice and knowledgeable to the right Google rep, then HTC rep (you must call Google first for approval, I found that out last time I did an exchange) There is no physical damage, and I doubt that that fall should have caused any issues. I would suspect that there was a faulty part/solder joint that is causing issues since the fall. Of course you can't tell them it was dropped though. And it might be good to restore it to stock software as well.

Kind of too late now took the void sticker off

Also noticed the charging light doesnt work either.
The loud speaker does...

This would have been hard to get warranty replaced. Too many issues make it look obvious. It's one thing to call up and say "my camera broke" is one thing. But to have a list of issues, "yeah my camera, charge light, ear piece, speaker, and LED" all stopped working. Good luck trying to get HTC on board with that one

It sounds like every broken function you mentioned is located on the small PCB at the top of the phone (cf the ifixit teardown).
Maybe it's just one of the connectors from the main PCB to the one at the top that got dislodged?

If its broken and no warranty....I got dibs on the shell!

Resurrection of a Slide

Not really sure if this will help anyone but just wanted to share. A month ago my wife came home from work with her Slide dead as a doornail. Would not get passed the boot screen. It was the one handset in the house that hasn't been rooted. After wiping time after time I finally gave up and went to the T-Mobile I used to work at. It seems they have had quiet a few of them doing this with no reason at all. I decided it was just a bad unit. Since there was no warranty on it I decided to open it up a few weeks later just to take a look. Aside from some pocket lint, I saw no issues. I brushed of the board with a soft bristled tooth brush. After assembly, low and behold she went straight on through th boot up process with no issues. I talked to a Buddy who had the same issue with one he was working on. Same story. Brushed of the minuscule amount of crud and came back to life. Is it possible that we have gotten our electronics so small now that even pocket lint can jack your phone up? Like I said don't know anything but what I saw, but you never know.

Epic 4G Speaker Innards

Well, The speaker began making crackly death sounds in my epic. From what I've seen via google search and here on the forums, It isn't entirely uncommon.
I've tinkered with some electronics before so i decided to avoid the whole going back to stock thing and picked up a speaker on ebay and replaced it. Along the way i decided to pick apart the failed bit. Took a few pictures but I am unsure of the cause of problems since i damaged the speaker prying the metal cover off. But I figure that one of the corners of the cone is getting popped inward and not letting the speaker do its thing.
If anyone else happens to have a failed/ noisy speaker and cares to take it apart please take a picture or two. I am simply curious as to if the corners are just creasing themselves inward somehow.

Imaperson said:
Well, The speaker began making crackly death sounds in my epic. From what I've seen via google search and here on the forums, It isn't entirely uncommon.
I've tinkered with some electronics before so i decided to avoid the whole going back to stock thing and picked up a speaker on ebay and replaced it. Along the way i decided to pick apart the failed bit. Took a few pictures but I am unsure of the cause of problems since i damaged the speaker prying the metal cover off. But I figure that one of the corners of the cone is getting popped inward and not letting the speaker do its thing.
If anyone else happens to have a failed/ noisy speaker and cares to take it apart please take a picture or two. I am simply curious as to if the corners are just creasing themselves inward somehow.
Click to expand...
Click to collapse
I just swapped one of my Epics out a couple of weeks ago because of this issue.

mattallica76 said:
I just swapped one of my Epics out a couple of weeks ago because of this issue.
Click to expand...
Click to collapse
I would have of just gone to sprint. But it seemed easier to me to just get the speaker off of ebay for 13 bucks and have an excuse to pop open the back cover. And I am le lazy when it came to going back to stock. Strange there are no void stickers of any sort on the thing though.

Imaperson said:
Well, The speaker began making crackly death sounds in my epic. From what I've seen via google search and here on the forums, It isn't entirely uncommon.
I've tinkered with some electronics before so i decided to avoid the whole going back to stock thing and picked up a speaker on ebay and replaced it. Along the way i decided to pick apart the failed bit. Took a few pictures but I am unsure of the cause of problems since i damaged the speaker prying the metal cover off. But I figure that one of the corners of the cone is getting popped inward and not letting the speaker do its thing.
If anyone else happens to have a failed/ noisy speaker and cares to take it apart please take a picture or two. I am simply curious as to if the corners are just creasing themselves inward somehow.
Click to expand...
Click to collapse
Yeah, I'm having the same problem... Samsung tried to blame the issue on Sprint haha!
But, no I don't feel comfortable taking the speaker out and replacing it... =/ good luck if you can figure it out though!

Imaperson said:
Well, The speaker began making crackly death sounds in my epic. From what I've seen via google search and here on the forums, It isn't entirely uncommon.
I've tinkered with some electronics before so i decided to avoid the whole going back to stock thing and picked up a speaker on ebay and replaced it. Along the way i decided to pick apart the failed bit. Took a few pictures but I am unsure of the cause of problems since i damaged the speaker prying the metal cover off. But I figure that one of the corners of the cone is getting popped inward and not letting the speaker do its thing.
If anyone else happens to have a failed/ noisy speaker and cares to take it apart please take a picture or two. I am simply curious as to if the corners are just creasing themselves inward somehow.
Click to expand...
Click to collapse
If I can find a speaker on Ebay, I will certainly give it a shot. This distortion is really bugging me. If I turn it up, it sounds like crap. If I turn it down, I get no ringtone, so I miss calls.

I got the same issue. I thought it was related to eb13.
Sent from my SPH-D700 using Tapatalk

Imaperson said:
Well, The speaker began making crackly death sounds in my epic. From what I've seen via google search and here on the forums, It isn't entirely uncommon.
I've tinkered with some electronics before so i decided to avoid the whole going back to stock thing and picked up a speaker on ebay and replaced it. Along the way i decided to pick apart the failed bit. Took a few pictures but I am unsure of the cause of problems since i damaged the speaker prying the metal cover off. But I figure that one of the corners of the cone is getting popped inward and not letting the speaker do its thing.
If anyone else happens to have a failed/ noisy speaker and cares to take it apart please take a picture or two. I am simply curious as to if the corners are just creasing themselves inward somehow.
Click to expand...
Click to collapse
I just replaced the big speaker on my epic, the sound works,but now I have to signal. Can't connect to the towers. Any suggestions?

Check the wire that leads to the antenna. Its a tiny one.
Sent from my SPH-D700 using XDA App

austin420 said:
Check the wire that leads to the antenna. Its a tiny one.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
It attaches to the speaker asembly, on the right side, grey ish right? When I replaced the speaker, the wire didn't seem to reattch right. should it be replaced? Any idea where I can get one?

Imaperson said:
Well, The speaker began making crackly death sounds in my epic. From what I've seen via google search and here on the forums, It isn't entirely uncommon.
I've tinkered with some electronics before so i decided to avoid the whole going back to stock thing and picked up a speaker on ebay and replaced it. Along the way i decided to pick apart the failed bit. Took a few pictures but I am unsure of the cause of problems since i damaged the speaker prying the metal cover off. But I figure that one of the corners of the cone is getting popped inward and not letting the speaker do its thing.
If anyone else happens to have a failed/ noisy speaker and cares to take it apart please take a picture or two. I am simply curious as to if the corners are just creasing themselves inward somehow.
Click to expand...
Click to collapse
glad to see im not the only one with this issue. my speaker sound like ass! unfortunately im not hardware savy enough to gut my epic but im gonna try and get my buddy at the repair center to see if he can fix it for me at his place instead of having to flash to stock to get it fixed then reflashing everything.

I always assumed it was an improper grounding issue, not the speaker itself. Different firmwares and ROMS have produced different results, so I have my doubts about the speaker being the issue.

Ya, mine is "blown" too... but it happened one day while I was at work... on silent. I was also kinda thinking it has more to do with software than hardware... but it hasn't fixed itself yet and it's been almost 2 weeks.
Looks like I might be doing the Odin thing soon, thank goodness for TEP.

Well, mine started to sound blown too. It happened overnight, I wasnt even using the speaker. Im farked too because I dont have insurance on this thing. Is this a software issue or what?

futureprospect said:
Well, mine started to sound blown too. It happened overnight, I wasnt even using the speaker. Im farked too because I dont have insurance on this thing. Is this a software issue or what?
Click to expand...
Click to collapse
Just for the record, if your wire wont attach again, its because the technicians have a special tool to pop in on and off.
If your speaker isn't working, take it into a repair center. If they can fix it in store and it's under warranty, it will cost you $35. If you have insurance, then it should be no cost. The store I went to was cool about custom roms and rooting, was even asking me about it.The store I went to was not a corporate store as there are no corporate stores in the area that do repairs.
Forgot to mention that if they can't fix it in store, they will send to Samsung and Samsung will send a refurbished model. So in that sense, it may be a good idea to Odin.

Mutiny32 said:
I always assumed it was an improper grounding issue, not the speaker itself. Different firmwares and ROMS have produced different results, so I have my doubts about the speaker being the issue.
Click to expand...
Click to collapse
I was hoping it would be a software issue but no amount of flashing back to stock would fix it. It started when my alarm went off one morning. Started out fine then turned to crackly death sounds all at once.
So far so good on the replacement speaker however.

Imaperson said:
I was hoping it would be a software issue but no amount of flashing back to stock would fix it. It started when my alarm went off one morning. Started out fine then turned to crackly death sounds all at once.
So far so good on the replacement speaker however.
Click to expand...
Click to collapse
yup, exactly how mine malfunctioned. I set the alarm, worked when i set it, then woke up to a gawd awfull crackly noise, and the speaker was blown.
Since i don't have TEP, should i just try and buy it and replace it myself or go back to stock and have the techs look at it at my sprint store?

I am experincing the "blowing" or "bursting" speakers, too, all of a sudden. I am on Bonsai 4.0.1, but I experienced that on stock ROM, too. I wish we can find a solid solution to this intriguing issue.
Sent from my SPH-D700 using XDA App

It might not actually be blown!
Long time reader, first time poster.
Ok, here is what I discovered about the Epic speaker. Like everyone else here I had my speaker die the same way, suddenly was distorted at any normal volume and no sound when you turned the volume to low, after awhile it just up and quit.
One thing i did discover was the if I tapped the speaker module it would start working again but blown sounding, so I thought "hmmm, seems like a loose connection". Got bored the other night and decided to take the speaker module out and see if I could spot a loose connector. No, no such luck, so after tearing the speaker module apart and playing with it, I narrowed it down to a bad solder joint in the ?diode? array under the red goo. when i would flex the cable it the speaker would suddenly start working again normally (no distortion, nice loud volume).
Now, as near as I can tell, Samsung is only using 2 leads of the connector hence the diode array (best guess due to the wiring pattern), voltage one way and the speaker plays, voltage the other way and the vibration motor runs. Someone please correct me if I'm wrong.
Unfortunately, I cannot say if this is a permanent fix or not, my diodes appear to have taken some damage due to me continuing playing around with the speaker module while it was on (Either cumulative from running it messed up, or maybe I shorted them while I was poking around; but the speaker volume decreased gradually over time, no distortion though). But I do know for awhile everything was working fine, and my speaker worked like it was supposed to.
If any of you have the same problem, and can manage small surface mount work, this might be a way to save a few $$ or get it working again in short order since the only replacement speakers in can find right now appear to be coming out of Hong Kong with a long delivery time.
Hope this helps someone. Thanks for all the help that you guys have given me over the years.
As in everything in life, YMMV.

Hmm, I did not think to check out the wires while i had it out. I no longer have the broken part so if i encounter the issue again i know where to start looking.
Thanks!

I had the same problem. Thankfully i have best buy black tie insurance.
Sent from my SPH-D700 using XDA Premium App

[TOILET AGAIN]Another loser has dropped the SGS right there

Hey, guys. I know there are dozens of threads talking about that, but mine is quite specific. First, the toilet disaster highlights one-to-one:
- phone sitting by the sink, which is close to toilet
- stupid movement and there it was, Skype was on.
- took 3 seconds to ignore all the human dignity I'd had and took the SGS from the water
- removed a crappy silicone cover (this one saved me from a more serious accident) very fast and removed the battery as fast as
- towel, paper-towel, rags
- rice bowl
- youtube video showing disassembly instructions (pretty easy)
- contact cleaner
- rice bowl again
It worked perfectly 24 hours later! Screen on, sound ok... very easy device to open.
Everything was fine until I accidentally hit the voice search and the "sound level meter" didn't move.
Microphone is not working since then. Doesn't work for calls, video with sound, audio note... It works fine with the stock earphone though.
Yes, I restored to factory settings.
Yes, I reflashed and reinstalled the ROM.
When I BLOW (with my mouth) into the mic, nothing happens. But when I SUCK it, the michophone seems to "catch" all the noise. Is this a signal of hope?
I opened it again and sprayed a good contact cleaner, right into the mic. No changes.
ANY HELP WILL BE APPRECIATED!!!

Phone was placed on the sink with "Skype on". Hmmmm

jbdroid said:
Phone was placed on the sink with "Skype on". Hmmmm
Click to expand...
Click to collapse
Ayup...
Clearly the phone was deeply ashamed of what was going on and jumped into the open toilet to save your dignity.

You sucked on the Mic???
ew.
Sent from my GT-I9000 using XDA App

Skype, bathroom, sucking and blowing the mic... woah...

Its very nasty
Sent from my GT-I9000 using XDA App

Lol
I said "loser"...
Guys, rolling on the floor here, but any actual help?
Ahahahahahahahahah

Oh man grodiest i9000 thread ever.

Did you ever think about to replace the mic?? If ya say its easy to open the phone then you wont have problems to replace the mic I actually dont think its too expansive for ya. So actually its funny to read but I fell with ya. But you shouldnt use skype on the toilet my phone is waiting outside of the bath room, when I'm makin the big deal on the toilet xD
good luck dude

24 hours is way to short to remove water stuck between board and smd components. I think you fired it up to soon. Electronics dont repair themselves, once broken you need to replace parts to get things going again.
Only luck or a wallet can save you now im afraid.

Aww dude no way !!!.
I have had my fair share of phones falling into the loo, Luckily not with my SGS, but with my tocco and my spica.
My tocco survived after leaving it dry on the radiator for a day (on low low temperature)
My spica survived but needed a new screen. which was surprisingly cheap (not genuine part)
Just for my own amusement, Was it a number one or a number two you was doing at the time ?
Funny comments, But serious matter. Take their advice and leave it dry out a little more, You could of made it worse by powering it up. But lets not jump to conclusions just yet,
If drying it out for longer dont work. See if you can make a bit of cash by selling it for parts on ebay or similar.
Oh and is it on a contract ? if so do you have insurance ? or are you close to a renewal ?
Good luck, Hope you get a good outcome

azzledazzle said:
If drying it out for longer dont work. See if you can make a bit of cash by selling it for parts on ebay or similar.
Click to expand...
Click to collapse
- I'll always look at parts from ebay suspiciously now.

RedBeardThePirate said:
- I'll always look at parts from ebay suspiciously now.
Click to expand...
Click to collapse
Obviously you will have to mention the water damage.
But some people do buy broken / water damaged stuff.
Might not get a lot of money but it could be better than throwing it in the bin

My phone got drowned in the bottom of bag with a leaking water bottle, similar thing, phone worked but the mic wasn't 100% and the center button did not work at all. Purchased a replacement 3 button membrane they call it off ebay for $25 from UK. The mic is built onto this membrane. Funnily enough button started to work the day before it arrived but I will still replace the membrane just to know the mic is 100% as sometimes it comes across scratchy on the other end.
Hope all goes well for you.

dwyer125 said:
My phone got drowned in the bottom of bag with a leaking water bottle, similar thing, phone worked but the mic wasn't 100% and the center button did not work at all. Purchased a replacement 3 button membrane they call it off ebay for $25 from UK. The mic is built onto this membrane. Funnily enough button started to work the day before it arrived but I will still replace the membrane just to know the mic is 100% as sometimes it comes across scratchy on the other end.
Hope all goes well for you.
Click to expand...
Click to collapse
+1
I bought the flex cable keypad wich comes with the microphone. Just 10$ from HongKong. However, 3 weeks to arrive.

u could try drying ur circuit board in an ultrasonic dryer... should remove all the water from it...
Sent from my GT-I9000 using Tapatalk

Last time I flooded a phone (lake, beer, boat, he he), I used a food dehydrator. 24 hours in that gadget and all was well. Just last week my brother jumped into the water with his iPhone in the pocket. Same procedure and 24 hours later his phone lives.

unresponsive touch screen

So my girlfriend drooped my phone and broke it on me. Oh my beloved atrix what ever will I do without you. Everything about the phone is working just fine so I am curious if its just the touch panel that ia broken. I touch the screen and nothing happens I have fully charged it and turned it on and off several times. Do you guys think if I replace the touch panel that there is a chance it will work again. I didn't get insurance on it because I was very careful with it and took care of it like it was my child lol.

First of all I would like to point out that it is ok to admit that you dropped it, and not your gf.
Secondly I would suggest tearing it down and checking the connections. I have seen where the digitizer connector will be loose and wont be responsive on other phones. I have never taken apart the atrix, so I dont know if that is a unlikely thing for it or not.
In the unlikely event that it really was your gf who dropped it, you could always guilt her in to getting you a new phone

Lol I swear it was her we were at the bar last night and she was trying to show somone the gi Joe psa's. Ill try and tear it down have to find a walk through I guess. The real kick in the teeth is I just bought a e book and it was really starting to get good . As far as guilting her, her parent were with us and gave me a kindle fire because they felt bad but the things useless until they get android running well enough on it.

there is a teardown site, i am too lazy to look it up, I am supposed to be studying business law right now ... dont tell my wife im on xda

I tried to replace my digitizer once and I wouldn't recommend trying to fix it yourself.
There are several youtube videos of the teardown and they are elaborate enough but some parts are really tricky and it's not as easy as it might look. Took me a few hours and the result was far from perfect...

Took the mobo out and checked all plugs everything seems fine. Replaced and still no response I will give the digitizer a try hopefully it works. Ordering it tonight and post my results when it comes in and i install it. I'm supprised you had problems putting it back together only problem i had was my God damn shaky hands lol. I am assuming it fell just right and damaged the chip on the digitizer itself. If it ends up working I know for sure that I will be buying a very buff case! The internals on these things are so fragile!