Related
Yesterday, I impulsively rooted my phone (my first time), successfully did it after several tries and installed jf 1.5. When everything was done and fully functional, I noticed some resistance when closing the keyboard. I tried closing it several times trying to investigate the cause.. until my screen just went black suddenly, w/ the resistance in closing it getting stronger! What I discovered was that the brown tape inside the screen, bottom part, ( the one you can only see w/ keyboard open) was caught in the hinge ripping it partially out of place. I dont have any idea what is the main finction of that tape/ ribbon but I believe it has something to do w/ the lcd. I ended up w/ a dead phone, won't power up anymore. i called the customer service but they don't have any idea what i'm talking about and suggested me to go to the nearest Tmobile store. I did and to my disappointment, nobody in the store also knows anything about G1, even though I'm pointing out to them the tape that was caught by the hinge! I called customer service and they seem not to understand about that hinge part of G1. Anyway, they will send a replacement in 3 days and I hope they wont discover that I rooted the phone. Well, it won't power up anymore and besides the problem is on the hardware and not on the software I installed.
I came across the same problem posted in one of the forums,a long time ago, coupled w/ some pictures I tried searching it again to no avail.
Anybody here have the same problem w/ G1? I do believe that HTC and Tmobile should be aware of this hardware flaw and do something about it. I love my G1, w/ its physical keyboard. But if all my G1 will end up this way, I may have to find a better phone.
Yep... had the same thing happen to me. Brought it into the store (30 days or less) and got a new one. If your's is older, it should still be under warranty. Contact T-Mobile and they should send you out a new phone.
That ribbon has several conductive traces in it. Basically, its a bunch of wires, and you moosed it out. I would say that it was your fault for forcing it when you should have investigated the problem BEFORE ripping it out.
Sounds like your screen just doesnt turn on, not that its bricked.
Thats the ribbon that connects the lcd and backlight to the ui module. It can be fixed most likely if you're not afraid to take it apart. What prob happened is the ribbon got bent up a bit, and one of the 2 connections for it got pulled out.
I disassembled one of my G1's completely, and there is a very specific way that ribbon has to fit into the hinge. Its not all that difficult, but you have to be very gentle and patient to get it back to where it needs to be.
You should go to the Dev forum, and do a search for G1 repair manual. You'll see what i mean. Feel free to PM me if you have any questions about it, although Im not an expert, just a tinkerer.
@lbcoder: you dont have to "investigate" anything, its made the way it should work, all he did is open and close screen, thats called a manufacturer defect, and falls under warranty.
@tr.slate: you are right, however that's exactly what OP put in his post. Nothing bout phone being bricked, but hardware flaw.
@jdc2006: yes, G1`s construction is not the most durable, as we can read around this forum, even i had squeking (or however oyu spell that word) but im guessing that it`s the price we pay for something new as this (though i would expect a bit more from HTC) but i dont think that all will have that problem. though Im on my second G1, first one got nasty case of stuck pixelitis.
now excuse me, i have to dispose a body from the trap.
G`nite.
This is going to be my 4th G1 and I hope the last..
The 1st one- brand new; has dead pixels- returned/replaced
The 2nd one, obviously a refurbished item, keyboard imperfectly fitted; home/call buttons replaced w/ cheap looking plastic, not the marble-like.
This 3rd one- almost perfect but ribbon/hinge flaw.
Good thing is I still have my old HTC Touch
tr.slate.. tnx, I like to tinker too but this beyond my capabilities.
I never had any problems with Tmobile fixing mine...When I first got mine in February 09 the ribbon stuck out a bit....they told me come back in 2 hours, i came back and they had it fixed, as others have said, it really needs to be in the right spot or something bad could happen to it...Its a cell phone, not much space to use.
I am posting regarding issues I've been haveing with my Nexus One units. Yes I have done swaps with HTC on three occasions and keep having the same issues.
One issue is a defect on the top left hand corner of the device where if there is a light shining on it at the right angle; a scuff mark appears. It is not rough to where you can feel it only to where it can be seen. It's an eye sore if you notice it.
Also is the dust under the screen. I know this problem will occur in most phones but is a nuisance to me. HTC is quick to swap out any phone with such problems.
And here on my third unit I'm getting screen flickering.
I would like to give info on how I treat my gadgets in general. I always take the greatest care for every tech I buy. My Nexus One has never hit the floor or been near water to cause any damage. Its always in the stock sleeve when its not being used.
I absolutely enjoy using my phone, but these replacements units are getting worse each time. Has anyone noticed any of the problems I'm speaking of, more so on the scuff mark and screen flickering?
Again this is not a slight towards the phone which I feel is great, but just to get a notion if this is going on to other owners or just localized with me.
Thank you for any response you give.
The only thing I can see under bright light on the top left is the light and proximity sensors. I don't have any of the issues you describe in fact, you must have been very unlucky.
Are you sure they actually swapped your phone (only applicable if you didn't got the advance replacement where they put a hold on your CC), worth noting your IMEI or serial number when replacing.
I had dust under the screen but have not had the problem since sending it in under warranty. Other than that the manufacture quality seems quite high given my limited sample set of 1.
I see the same scuff mark in the upper-left corner, but I only saw it after having dropped the phone once. Otherwise, I had the clicking screen corners, but a hairdryer took care of that. To date (~1.5 months of use), still no dust, and that's with regular use of the trackball and everything.
I did have an actual swap, replacement came in before I sent mine out. I tis unfortunate, but it seems out of the ordinary to have the same scuff mark on each replacement. I did check IMEI numbers on all devices.
I really enjoy this phone, Ive gone through countless phones ranging from Nokias to Samsungs to HTC. I never had this problem before with all of those.
The scuff mark appears on the body of the phone, not the screen. I understand where the sensors are and thankfully that has not been a problem I went through.
I just can't imagine this is all my luck of replacements.
KnightMAREcrow said:
I did have an actual swap, replacement came in before I sent mine out. I tis unfortunate, but it seems out of the ordinary to have the same scuff mark on each replacement. I did check IMEI numbers on all devices.
I really enjoy this phone, Ive gone through countless phones ranging from Nokias to Samsungs to HTC. I never had this problem before with all of those.
The scuff mark appears on the body of the phone, not the screen. I understand where the sensors are and thankfully that has not been a problem I went through.
I just can't imagine this is all my luck of replacements.
Click to expand...
Click to collapse
Post a picture of this scuff mark you're referring to. If you've had it on three different phones and the rest of us don't have it, then there's obviously a disconnect here.
from my talks with HTC when you send the phone in to be repaired instead of exchanged they fix all the issues 100% because they are repaired by hand. i was assured when i got mine back it would have 0 chance of having anymore dust issues. so we'll see how that goes.
didn't have any of the other issues you mentioned though.
I have tried to photograph said defect, but to no avail. I have tried over and over again to, but the camera I have is a piece of junk.
I assure you what I said about it. Its not me doing anything wrong. I had it on my original phone and thus checked every time I received a replacement.
I do not know if the technicians are actually following the advice I gave them to the HTC rep to angle the phone to find it.
Recently I sent out a message to Google directly pleading to receive a brand new unit, I will probably not get that knowing how businesses work. I'm an accountant/consultant.
The ways things have turned out tell me that there is a fault in the manufacturing process, maybe localized to a certain "chain" if you will. How I got three of the same problems amazes me. I know it has been fixed because I have two other friends that have this phone without the problem of the scuff mark. They purchased the phone a month after it came out meaning they received a phone from a different batch.
I will update this thread again when I receive another replacement after the current ticket is resolved. Thanks for the responses
Thought I'd share my story. I recently got a swap out for a "dusty" screen. My new phone seemed OK. A few days passed by and my camera flash started acting up and not working... Today I woke up and NOTHING on the top half of my phone works. Meaning my ear peice, my 3.5mm jack, my camera, or flash, or proximity/light sensors... nothing. But the speakerphone works, my screen is fine. and my microphone works. kinda odd!
It almost like the top PC board got disconnected internally or something.
Just thought this was a strange issue. Already requested yet ANOTHER swap from HTC. Hopefully this next one can make me beleive this phone was worth it.
On another note. I did get my phone "ghost armored" at a cart in the mall pretty much immediately upon receiving it from fedex. And they do spray a small amount of soapy liquid on the outside of the phone to apply the skins. Do you think this could be enough to cause water damage? I'm afraid HTC is going to charge me for "non warranty problems" if the guys at ghost armor caused this! Its a very "fine mist" they use so I think it would be hard to penetrate the phones seals. But who knows? Whats your opinion?
dills84 said:
Thought I'd share my story. I recently got a swap out for a "dusty" screen. My new phone seemed OK. A few days passed by and my camera flash started acting up and not working... Today I woke up and NOTHING on the top half of my phone works. Meaning my ear peice, my 3.5mm jack, my camera, or flash, or proximity/light sensors... nothing. But the speakerphone works, my screen is fine. and my microphone works. kinda odd!
It almost like the top PC board got disconnected internally or something.
Just thought this was a strange issue. Already requested yet ANOTHER swap from HTC. Hopefully this next one can make me beleive this phone was worth it.
On another note. I did get my phone "ghost armored" at a cart in the mall pretty much immediately upon receiving it from fedex. And they do spray a small amount of soapy liquid on the outside of the phone to apply the skins. Do you think this could be enough to cause water damage? I'm afraid HTC is going to charge me for "non warranty problems" if the guys at ghost armor caused this! Its a very "fine mist" they use so I think it would be hard to penetrate the phones seals. But who knows? Whats your opinion?
Click to expand...
Click to collapse
water can literally penetrate the smallest most microscopic points. but i dont know think "mist" could do any harm. i think it sucks that you're having bad luck with all these though man.
I like straweberries, they taste good. When eaten slightly chilled they are refreshing as well. And the things you can do with them... fresh fruit topping for cereal, pancakes, yogurt, or you can make them into jam/jelly/compo(sp?)
Anyways, yes, it is possible for your device to have received water damage, this is why I have not and will never put something on my phone that requires the use of water in the application process. And it might even be probable given that on the top of the phone you have a 3.5mm jack, speaker housing, and when you take the back off this gets exposed... and I am guessing they removed the back before misting it, so even more water can get into that area causing major issues.
pjcforpres said:
I like straweberries, they taste good. When eaten slightly chilled they are refreshing as well. And the things you can do with them... fresh fruit topping for cereal, pancakes, yogurt, or you can make them into jam/jelly/compo(sp?)
Anyways, yes, it is possible for your device to have received water damage, this is why I have not and will never put something on my phone that requires the use of water in the application process. And it might even be probable given that on the top of the phone you have a 3.5mm jack, speaker housing, and when you take the back off this gets exposed... and I am guessing they removed the back before misting it, so even more water can get into that area causing major issues.
Click to expand...
Click to collapse
Haha, thanks for your opinion on strawberrys.
I believe they remove the battery, but put the battery cover back on before misting. They also leave the device off while they do this and tell you to leave it off for an additional 2 hours (i left mine off for 6 or 7 hours.)
Even leaving it off, if water gets it, it gets in, and starts causing the circuits and what not to corrode.
I will say, I think it is highly unlikely that you do have water damage causing this problem. If HTC says no go, water damage, those misty dudes are responsible and liable to replace your device/pay for repairs. But, I do highly doubt it.
Still, there is a chance of there being water damage, and even if it isn't causing the problem, HTC won't care.
All in all, I would put money that the swap goes just fine, and hopefull 3rd time is the charm for you. It seems some people, no offense, just have really bad luck with these, while others (not to brag), have bought 5 of them without a single problem.
pjcforpres said:
Even leaving it off, if water gets it, it gets in, and starts causing the circuits and what not to corrode.
I will say, I think it is highly unlikely that you do have water damage causing this problem. If HTC says no go, water damage, those misty dudes are responsible and liable to replace your device/pay for repairs. But, I do highly doubt it.
Still, there is a chance of there being water damage, and even if it isn't causing the problem, HTC won't care.
All in all, I would put money that the swap goes just fine, and hopefull 3rd time is the charm for you. It seems some people, no offense, just have really bad luck with these, while others (not to brag), have bought 5 of them without a single problem.
Click to expand...
Click to collapse
5 of them?! jeez!
I agree, I'm having really bad luck. I LOVE this phone. Its just getting annoying having to swap it out every other week.
I'm also angry that this broken one has the best screen I've seen on any nexus, no dust, no pink tint. its perfect! and i have to return it
Oh well. thanks for the advice. I feel a little better about the swap now, I cant really afford to lose another 530$.
One for me, and 4 others for friends that had me help them buy one...
Well, The speaker began making crackly death sounds in my epic. From what I've seen via google search and here on the forums, It isn't entirely uncommon.
I've tinkered with some electronics before so i decided to avoid the whole going back to stock thing and picked up a speaker on ebay and replaced it. Along the way i decided to pick apart the failed bit. Took a few pictures but I am unsure of the cause of problems since i damaged the speaker prying the metal cover off. But I figure that one of the corners of the cone is getting popped inward and not letting the speaker do its thing.
If anyone else happens to have a failed/ noisy speaker and cares to take it apart please take a picture or two. I am simply curious as to if the corners are just creasing themselves inward somehow.
Imaperson said:
Well, The speaker began making crackly death sounds in my epic. From what I've seen via google search and here on the forums, It isn't entirely uncommon.
I've tinkered with some electronics before so i decided to avoid the whole going back to stock thing and picked up a speaker on ebay and replaced it. Along the way i decided to pick apart the failed bit. Took a few pictures but I am unsure of the cause of problems since i damaged the speaker prying the metal cover off. But I figure that one of the corners of the cone is getting popped inward and not letting the speaker do its thing.
If anyone else happens to have a failed/ noisy speaker and cares to take it apart please take a picture or two. I am simply curious as to if the corners are just creasing themselves inward somehow.
Click to expand...
Click to collapse
I just swapped one of my Epics out a couple of weeks ago because of this issue.
mattallica76 said:
I just swapped one of my Epics out a couple of weeks ago because of this issue.
Click to expand...
Click to collapse
I would have of just gone to sprint. But it seemed easier to me to just get the speaker off of ebay for 13 bucks and have an excuse to pop open the back cover. And I am le lazy when it came to going back to stock. Strange there are no void stickers of any sort on the thing though.
Imaperson said:
Well, The speaker began making crackly death sounds in my epic. From what I've seen via google search and here on the forums, It isn't entirely uncommon.
I've tinkered with some electronics before so i decided to avoid the whole going back to stock thing and picked up a speaker on ebay and replaced it. Along the way i decided to pick apart the failed bit. Took a few pictures but I am unsure of the cause of problems since i damaged the speaker prying the metal cover off. But I figure that one of the corners of the cone is getting popped inward and not letting the speaker do its thing.
If anyone else happens to have a failed/ noisy speaker and cares to take it apart please take a picture or two. I am simply curious as to if the corners are just creasing themselves inward somehow.
Click to expand...
Click to collapse
Yeah, I'm having the same problem... Samsung tried to blame the issue on Sprint haha!
But, no I don't feel comfortable taking the speaker out and replacing it... =/ good luck if you can figure it out though!
Imaperson said:
Well, The speaker began making crackly death sounds in my epic. From what I've seen via google search and here on the forums, It isn't entirely uncommon.
I've tinkered with some electronics before so i decided to avoid the whole going back to stock thing and picked up a speaker on ebay and replaced it. Along the way i decided to pick apart the failed bit. Took a few pictures but I am unsure of the cause of problems since i damaged the speaker prying the metal cover off. But I figure that one of the corners of the cone is getting popped inward and not letting the speaker do its thing.
If anyone else happens to have a failed/ noisy speaker and cares to take it apart please take a picture or two. I am simply curious as to if the corners are just creasing themselves inward somehow.
Click to expand...
Click to collapse
If I can find a speaker on Ebay, I will certainly give it a shot. This distortion is really bugging me. If I turn it up, it sounds like crap. If I turn it down, I get no ringtone, so I miss calls.
I got the same issue. I thought it was related to eb13.
Sent from my SPH-D700 using Tapatalk
Imaperson said:
Well, The speaker began making crackly death sounds in my epic. From what I've seen via google search and here on the forums, It isn't entirely uncommon.
I've tinkered with some electronics before so i decided to avoid the whole going back to stock thing and picked up a speaker on ebay and replaced it. Along the way i decided to pick apart the failed bit. Took a few pictures but I am unsure of the cause of problems since i damaged the speaker prying the metal cover off. But I figure that one of the corners of the cone is getting popped inward and not letting the speaker do its thing.
If anyone else happens to have a failed/ noisy speaker and cares to take it apart please take a picture or two. I am simply curious as to if the corners are just creasing themselves inward somehow.
Click to expand...
Click to collapse
I just replaced the big speaker on my epic, the sound works,but now I have to signal. Can't connect to the towers. Any suggestions?
Check the wire that leads to the antenna. Its a tiny one.
Sent from my SPH-D700 using XDA App
austin420 said:
Check the wire that leads to the antenna. Its a tiny one.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
It attaches to the speaker asembly, on the right side, grey ish right? When I replaced the speaker, the wire didn't seem to reattch right. should it be replaced? Any idea where I can get one?
Imaperson said:
Well, The speaker began making crackly death sounds in my epic. From what I've seen via google search and here on the forums, It isn't entirely uncommon.
I've tinkered with some electronics before so i decided to avoid the whole going back to stock thing and picked up a speaker on ebay and replaced it. Along the way i decided to pick apart the failed bit. Took a few pictures but I am unsure of the cause of problems since i damaged the speaker prying the metal cover off. But I figure that one of the corners of the cone is getting popped inward and not letting the speaker do its thing.
If anyone else happens to have a failed/ noisy speaker and cares to take it apart please take a picture or two. I am simply curious as to if the corners are just creasing themselves inward somehow.
Click to expand...
Click to collapse
glad to see im not the only one with this issue. my speaker sound like ass! unfortunately im not hardware savy enough to gut my epic but im gonna try and get my buddy at the repair center to see if he can fix it for me at his place instead of having to flash to stock to get it fixed then reflashing everything.
I always assumed it was an improper grounding issue, not the speaker itself. Different firmwares and ROMS have produced different results, so I have my doubts about the speaker being the issue.
Ya, mine is "blown" too... but it happened one day while I was at work... on silent. I was also kinda thinking it has more to do with software than hardware... but it hasn't fixed itself yet and it's been almost 2 weeks.
Looks like I might be doing the Odin thing soon, thank goodness for TEP.
Well, mine started to sound blown too. It happened overnight, I wasnt even using the speaker. Im farked too because I dont have insurance on this thing. Is this a software issue or what?
futureprospect said:
Well, mine started to sound blown too. It happened overnight, I wasnt even using the speaker. Im farked too because I dont have insurance on this thing. Is this a software issue or what?
Click to expand...
Click to collapse
Just for the record, if your wire wont attach again, its because the technicians have a special tool to pop in on and off.
If your speaker isn't working, take it into a repair center. If they can fix it in store and it's under warranty, it will cost you $35. If you have insurance, then it should be no cost. The store I went to was cool about custom roms and rooting, was even asking me about it.The store I went to was not a corporate store as there are no corporate stores in the area that do repairs.
Forgot to mention that if they can't fix it in store, they will send to Samsung and Samsung will send a refurbished model. So in that sense, it may be a good idea to Odin.
Mutiny32 said:
I always assumed it was an improper grounding issue, not the speaker itself. Different firmwares and ROMS have produced different results, so I have my doubts about the speaker being the issue.
Click to expand...
Click to collapse
I was hoping it would be a software issue but no amount of flashing back to stock would fix it. It started when my alarm went off one morning. Started out fine then turned to crackly death sounds all at once.
So far so good on the replacement speaker however.
Imaperson said:
I was hoping it would be a software issue but no amount of flashing back to stock would fix it. It started when my alarm went off one morning. Started out fine then turned to crackly death sounds all at once.
So far so good on the replacement speaker however.
Click to expand...
Click to collapse
yup, exactly how mine malfunctioned. I set the alarm, worked when i set it, then woke up to a gawd awfull crackly noise, and the speaker was blown.
Since i don't have TEP, should i just try and buy it and replace it myself or go back to stock and have the techs look at it at my sprint store?
I am experincing the "blowing" or "bursting" speakers, too, all of a sudden. I am on Bonsai 4.0.1, but I experienced that on stock ROM, too. I wish we can find a solid solution to this intriguing issue.
Sent from my SPH-D700 using XDA App
It might not actually be blown!
Long time reader, first time poster.
Ok, here is what I discovered about the Epic speaker. Like everyone else here I had my speaker die the same way, suddenly was distorted at any normal volume and no sound when you turned the volume to low, after awhile it just up and quit.
One thing i did discover was the if I tapped the speaker module it would start working again but blown sounding, so I thought "hmmm, seems like a loose connection". Got bored the other night and decided to take the speaker module out and see if I could spot a loose connector. No, no such luck, so after tearing the speaker module apart and playing with it, I narrowed it down to a bad solder joint in the ?diode? array under the red goo. when i would flex the cable it the speaker would suddenly start working again normally (no distortion, nice loud volume).
Now, as near as I can tell, Samsung is only using 2 leads of the connector hence the diode array (best guess due to the wiring pattern), voltage one way and the speaker plays, voltage the other way and the vibration motor runs. Someone please correct me if I'm wrong.
Unfortunately, I cannot say if this is a permanent fix or not, my diodes appear to have taken some damage due to me continuing playing around with the speaker module while it was on (Either cumulative from running it messed up, or maybe I shorted them while I was poking around; but the speaker volume decreased gradually over time, no distortion though). But I do know for awhile everything was working fine, and my speaker worked like it was supposed to.
If any of you have the same problem, and can manage small surface mount work, this might be a way to save a few $$ or get it working again in short order since the only replacement speakers in can find right now appear to be coming out of Hong Kong with a long delivery time.
Hope this helps someone. Thanks for all the help that you guys have given me over the years.
As in everything in life, YMMV.
Hmm, I did not think to check out the wires while i had it out. I no longer have the broken part so if i encounter the issue again i know where to start looking.
Thanks!
I had the same problem. Thankfully i have best buy black tie insurance.
Sent from my SPH-D700 using XDA Premium App
my problem is that when i received my device i found a small bend (like if a small ball hit the screen )on the down button of the screen , it wasn't noticeable even if you move you`re finger across it , then several days a go I was working hard on the device and it got really hot and suddenly i noticed a yellow thing on the screen same place as the bends locate ,
the yellow thing will go after the screen cools down
any idea what is that yellow thing
if any one have any idea how to fix it I would appreciate that
Thank you allot
note: at the moment am not in us or any country that google play support :crying:.
Looks like the glue that sometimes shows up on the N4/iPhone when they overheat. If it is, it isn't a huge deal
Sent from my Nexus 4 using Tapatalk 2
is it going to disappear ?
Do you want to risk waiting? Get Google to replace it asap. You paid hundreds for the device, it should be *perfect*.
RevoBass said:
my problem is that when i received my device i found a small bend (like if a small ball hit the screen )on the down button of the screen , it wasn't noticeable even if you move you`re finger across it , then several days a go I was working hard on the device and it got really hot and suddenly i noticed a yellow thing on the screen same place as the bends locate ,
the yellow thing will go after the screen cools down
any idea what is that yellow thing
if any one have any idea how to fix it I would appreciate that
Thank you allot
note: at the moment am not in us or any country that google play support :crying:.
Click to expand...
Click to collapse
Dude I have the exact thing wrong with mine. When its hot I get a really ugly yellow ring there too. Rest of the screen is fine but hasn't dissipated in two weeks.
The bad news is that either you play the play store lottery and end up with a worse device or you do the same with lg. I was going to get mine repaired, or rather have the screen replaced by lg rather than get yet another exchange but another person said that lg charged the repair cost and shipped a new phone. I don't know if the replacement is a refurb but it would make sense. The whole point for me with lg doing the warranty repair is to not get a different phone. Everything about my phone is awesome. I think we might have no choice unless you just want to keep it. I was going to but the ring drives me nuts. It is very visible in a sea of white.
Sent from my 5th and final Nexus 4
Jayrod1980 said:
Dude I have the exact thing wrong with mine. When its hot I get a really ugly yellow ring there too. Rest of the screen is fine but hasn't dissipated in two weeks.
The bad news is that either you play the play store lottery and end up with a worse device or you do the same with lg. I was going to get mine repaired, or rather have the screen replaced by lg rather than get yet another exchange but another person said that lg charged the repair cost and shipped a new phone. I don't know if the replacement is a refurb but it would make sense. The whole point for me with lg doing the warranty repair is to not get a different phone. Everything about my phone is awesome. I think we might have no choice unless you just want to keep it. I was going to but the ring drives me nuts. It is very visible in a sea of white.
Sent from my 5th and final Nexus 4
Click to expand...
Click to collapse
it is hard to ignore the problem , the device is fantastic
but what is that yellow spot
is it glue ?
how does glue reached the middle of the screen :silly:
Well the whole screen is glued to the touchscreen. The glue is thicker in that area because of the deformation in the glass. The person or robot pushed too hard when the panel was installed or glued and thus it dried unevenly. I got an order in for yet another RMA but the situation really pisses me off. My last is faster binned, perfect speaker and battery and everything else. Hardly any rattle, etc. When the RMA replacement ships I'm still going to call the lg warranty number and see if there's an option to replace my actual screen rather than getting a replacement. I seriously doubt they will scrutinize a device, even one they have repaired through refurbishment, as much as an anal retentive owner like myself will. I'll let you know if I find anything out. Knowing my abysmal record with the play store, my next will be worse than this one.
Sent from my 5th and final Nexus 4
Jayrod1980 said:
Well the whole screen is glued to the touchscreen. The glue is thicker in that area because of the deformation in the glass. The person or robot pushed too hard when the panel was installed or glued and thus it dried unevenly. I got an order in for yet another RMA but the situation really pisses me off. My last is faster binned, perfect speaker and battery and everything else. Hardly any rattle, etc. When the RMA replacement ships I'm still going to call the lg warranty number and see if there's an option to replace my actual screen rather than getting a replacement. I seriously doubt they will scrutinize a device, even one they have repaired through refurbishment, as much as an anal retentive owner like myself will. I'll let you know if I find anything out. Knowing my abysmal record with the play store, my next will be worse than this one.
Sent from my 5th and final Nexus 4
Click to expand...
Click to collapse
if LG would replace our screen I think that would be PERFECT .
ahhhhh
my friend I hope that you would be able to fix your problem , yet in my case I am outside usa at the moment so i think LG would charge me for a new device (or screen) .
if you were able to resolve your problem please don`t forget me :crying:
best wishes