Database Users

[MIUI] Wifi problem

I've got a question.
My wifi is not working. I am unable to obtain ip address and connect to my network. I am sure that it is connected with MIUI ROM, because on any other ROM it works fine (custom, stock, CM7, but not MIUI)
I've also tried different modems, kernels in my Galaxy S, and also tried to connect with different routers and even i;ve created ad-hoc network on my laptop.
Have You any idea what to do to resolve this problem?
lack of wifi disqualifies MIUI as my ROM :/

[Q] (Q)Huawei 3G on HV?

Hi guys! Does anyone know how do I setup a Huawei E173 on HV with HV 3.3 kernel? When I plug it in it starts to blink, but I don't have internet. Thank you!

Bump! It's really important.

E170 on HV2.5
I am trying to get my E170 working on HV 2.5 (latest kernel for stock 3.1) but always get "Error while searching for networks" nor can I enter&save APN settings. Just would like to find out if V2.5 is supposed to work with 3G sticks. Read that later releases contain fixes, but want to stay on stock 3.1 and the later HV releases are for HC 3.2 ...
Maybe someone has a tip/suggestion?
thanks, Marcher

I have the feeling that it thinks the modem is a flash drive and not a 3G dongle.

Have you turned off the sd card option with AT^U2DIAG=0 command? You need to use putty or just basic Hyper Terminal to send the command to the modem. After this your dongle will be working only as a 3g modem. This option is reversible.
Hope this helps!

Thanks. I'm gonna try it.
Edit: Thank you very much! I downloaded Lightspeed with 3G, did the AT^U2DIAG=0 command, and it worked!

5GHz Wireless N?

I had my phone connecting to my SSID-disabled 5GHz wireless network for several weeks--even while rooted--and then after flashing my ROM, haven't been able to reconnect no matter what (turned on SSID, no security, etc.). It doesn't seem to matter what ROM or kernel I use, either; I'm currently on Virtuous Doubleshot 1.1.6 but I also couldn't connect using Generation-X GB Stock V4. In fact, it doesn't even see my network. I haven't touched the radio at all.
I really don't want to go back to stock; does anyone have any ideas what's going on?

I think you need to upgrade your radio and try.
If you are on 2.3.4 based rom use the radio 2.19.531.1 RUU
Refer this post it gives you all the available radios & the procedure.
http://forum.xda-developers.com/showthread.php?t=1059347

Radio shouldn't have anything to do with wireless drivers, AFAIK.

[Q] Get 3g working with A500

Hi there, I am trying to get my A500 working with a HUAWEI E173 usb 3g modem. I spent the whole day researching what is have to do. However i was not able to get it working and i don't know why.
Here is the steps i did:
1. First i tried this guide, but the update.zip sent me in a boot loop, so i looked for a ROM with integrated 3g support
2. I found and flashed Thor's rom (which is i think far the best)
3. In setting there is APN setup menu, however i did not find any save option, so i downloaded APN manager from market and was able to configure it through that
4. I resetted my usb modem following the bottom instructions on this guide again.
5. I downloaded a ril-daemon restarter,
6. I connected my modem to my device, used daemon restarter, activated apn
7. Nothing happens, no connection, nothing
What am I doing wrong, what have i missed?
Please help guys!

Well, i have probed several roms, and i think Taboonay 2.2 (look in developer thread) is best working with Huawei 3G usb stick.
Sorry my english.
Good luck

Hi, thanks for the reply. I think the problem is not with my ROM, i triple checked everything. I have ro.carrier set to 3g, so not wifi only. It should work, but still nothing

I'm also having problems getting my huawei E173 to work with my A500 running Taboonay 2.2.
I have enabled 3G in TabooTools and disabled zero cd on the E173 via putty but when I rebooted the A500 I get the message 'Please insert a SIM card' on the lock screen and the Mobile settings menu is missing. It seems like the usb dongle has not been recognised by the tablet but when I ran the USB Device Info app it does show up with all the device info with the path /dev/bus/usb/001/003. I have no idea why it is not working except may be the modem is not compatible but the huawei E173 is listed as working for others. Could the problem be the firmware? I think the firmware is up to date because the modem was manufactured only a few months ago.
Also, in the /dev directory, I don't have ttyUSB0, ttyUSB1, ttyUSB2.

Does anyone know what the following dmesg means?
usb_wwan: version magic '2.6.36.3-Trinity+ SMP....' should be '2.6.36.3HoneyVillian-3.7+ SMP....'
option: version magic '2.6.36.3-Trinity+ SMP....' should be '2.6.36.3HoneyVillian-3.7+ SMP....'

Gip23 said:
Hi there, I am trying to get my A500 working with a HUAWEI E173 usb 3g modem. I spent the whole day researching what is have to do. However i was not able to get it working and i don't know why.
Here is the steps i did:
1. First i tried this guide, but the update.zip sent me in a boot loop, so i looked for a ROM with integrated 3g support
2. I found and flashed Thor's rom (which is i think far the best)
3. In setting there is APN setup menu, however i did not find any save option, so i downloaded APN manager from market and was able to configure it through that
4. I resetted my usb modem following the bottom instructions on this guide again.
5. I downloaded a ril-daemon restarter,
6. I connected my modem to my device, used daemon restarter, activated apn
7. Nothing happens, no connection, nothing
What am I doing wrong, what have i missed?
Please help guys!
Click to expand...
Click to collapse
I now have the same problem as you. Setup APN but no connection and NO RECEPTION. Signal strength is 0 dBm 99 asu.

there's a signal but no internet, help?
hi,
I'have the same problem.
i've called to my mobile provider and they had told me
that their is a connection between the 3g modem and my provider.
But on the tablet, the dispaly give no indiction that there'sa connection.
So I'm not able togoon internet or on gooe apps with my 3g usb stick (Huwawei k3565)
Any help,,?
grtz

MK808b plus, no wifi, no MAC address

I ordered an MK808B plus from GeekBuying.
I try to install rooted FW (KI Valkostur 20160202), but there are no wifi.
I reinstall, the original, but wifi not come back.
I try Finless ROM 1.1: not started, i try superceleron 1.4b ROMs but no wifi.
I try 109k4, 111k4, and 112k4.img original ROMs.
The stick is working, but can not turn ON the wifi, and the Blue LED not lighting.
IP, MAC, and Bluetooth addresses are Unavailable.
How can i get back, the radio part, and MAC?

Same problem here :crying:

thank you for your help