Is the keypad fully connected with the touchscreen? Because my keypad flex cabel is broken, and my digitizer doesn't respond. Do i need to buy a new digitezer or just flex cabel? Can somebody help me? Thanks
Related
Hello there, with placing my keyboard part in a new housing i damaged the flexible circuit of it, now some keys dont work anymore.
I was looking everywhere to buy a broken herald or wing so i can take the keyboard from that one. I cant find the keyboard circuit as a part on ebay or webstores.
Maybe anyone on this board has a herald with broken lcd or defect hardware except the keyboard hardware?
Any help or suggestions will be appreciated!
I dont know if anyone opend their wizard up.... mine is the tmobile mda..
the earpeice does not work when the slider is closed... or halfway...
the keyboard has to be slid completly open for any sound to be heard...
i know its a loose connection somewhere in the slide.... anyone know how to fix it?...
just started happening a few hours ago.
and now neither works... only works in speakerphone... wth is going on
It sounds as if your rigid flex cable is kicking it,
However your phone speaker could just be loose. It is affixed to the front plate and not the Rigid flex board.
I would try to troubleshoot with a dissassembly.
if the main ribbon cable is torn you should replace the rigid flex board. If your speaker is loose or broken You can look on XDA to see if someone is selling one.
ok.. i just read the service manual on how to dissassemble the wizard...
i just want to get a few things straight...
the rigid flex board is the board for the keyboard right?...
ribbon cable is that big thick silver ribbon right?...
if said cable is torn... i have to replace the entire rigid flex board? or can i just replace the ribbon cable instead?
if the speaker is loose... all i would have to do is tighten it... if it is broken .. all i have to do is replace it right?...
------
im sure the speaker isnt broken.... because it was working when the slider was slid open... and not working when it was closed.
bigjoe87865 said:
ok.. i just read the service manual on how to dissassemble the wizard...
i just want to get a few things straight...
the rigid flex board is the board for the keyboard right?...
ribbon cable is that big thick silver ribbon right?...
if said cable is torn... i have to replace the entire rigid flex board? or can i just replace the ribbon cable instead?
if the speaker is loose... all i would have to do is tighten it... if it is broken .. all i have to do is replace it right?...
------
im sure the speaker isnt broken.... because it was working when the slider was slid open... and not working when it was closed.
Click to expand...
Click to collapse
Hi there bigjoe,
where did you find the service manual for the Wizard? I have audio problems myself (the mic and speaker just died, i can´t hear anything and the caller can´t hear anything, but the damn thing rings nonetheless!) and my warranty is up. So I would like to take a peek inside!
bigjoe87865 said:
ok.. i just read the service manual on how to dissassemble the wizard...
i just want to get a few things straight...
the rigid flex board is the board for the keyboard right?...
ribbon cable is that big thick silver ribbon right?...
if said cable is torn... i have to replace the entire rigid flex board? or can i just replace the ribbon cable instead?
if the speaker is loose... all i would have to do is tighten it... if it is broken .. all i have to do is replace it right?...
------
im sure the speaker isnt broken.... because it was working when the slider was slid open... and not working when it was closed.
Click to expand...
Click to collapse
Ok, Here are the answers in order.
The rigid flex board is the board you see in the top portion of the wizard (where the screen and buttons are housed.)
The master ribbon cable is the big thick silver one yes.
I would replace the board it could just as well cause problems.(it's not too expensive)
If it is loose re-seat it in it's place. If broken replace it.
---to epatnor
Have your first tried hard reset?
It sound as if your master cable is or rigid flex board going, but it could simply be your speaker and mic.
The service manual is here:http://www.megaupload.com/?d=BEG0XKM8
Hope this helps you.
-M
Hi. My touch keys menu and back is not working, home key works. Menu and back sometimes work,mostly dont. I tried all ROM and kernels version but not improvement. I think keypad ribbon flex cable is broken GENUINE-SAMSUNG-KEYPAD-FLEX-RIBBON-CABLE??
Yesterday i opened phone and now i have low signal range.
I wonder is why my buttons dont work can it be related to flex ribbon cable malfunction?
sorry, dont know if it is related to flex ribbon cable malfunction?
But my advice is you should send the phone to Samsung for repair and not attempt repairs on it yourself.
Of course if you have the skill then you should try yourself but if you are covered under warranty then you should get it repaired.
Best of luck!
Thank you for your time.
I am from Montenegro, there is no one here who could do it.
I ordered keypad flex cable, i will try with it. If anyone has any suggestions let say
That glue used for bonding parts of the phone? Display a little air...
I have to paste his display and menu and back keys.
That glue I use?
I replaced the flex ribbon cable but menu and back is not working! Maybe touch is not working?
Hi
i have been a unlucky owner of this handset as its screen was cracked and while replacing with a new one , the guy who were doing that accidently damaged the tiny microphone of my handset. they microphone was connected with the flex cable by a tiny ribon , now the ribon is cutted . vibrator and sensors and home button is working only the microphone is damaged. ANYONE please let me know can i just install a microphone or i have to buy entire bottom flex cable ?? please Help me
( i have uploaded a pic of microphone connector , please note that in my phone the microphone are torn disconnectd from main bottom flex cable )
sakibchy said:
Hi
i have been a unlucky owner of this handset as its screen was cracked and while replacing with a new one , the guy who were doing that accidently damaged the tiny microphone of my handset. they microphone was connected with the flex cable by a tiny ribon , now the ribon is cutted . vibrator and sensors and home button is working only the microphone is damaged. ANYONE please let me know can i just install a microphone or i have to buy entire bottom flex cable ?? please Help me
( i have uploaded a pic of microphone connector , please note that in my phone the microphone are torn disconnectd from main bottom flex cable )
Click to expand...
Click to collapse
I have the same problem, mic doesn`t work after a drop, I bought the flex cable of ebay, but I`m a bit confused on how to install it,
I follow some guides on you tube, but normally they require to remove the screen, and that would be very difficult not to break it,
Any help please?
sonci said:
I have the same problem, mic doesn`t work after a drop, I bought the flex cable of ebay, but I`m a bit confused on how to install it,
I follow some guides on you tube, but normally they require to remove the screen, and that would be very difficult not to break it,
Any help please?
Click to expand...
Click to collapse
use service manual, has details for dismantling http://forum.xda-developers.com/showthread.php?t=1709378
So i bought a used HD2 so i could get rid of my Aria and do a dual boot
The digitizer was bad so i bought that as well as a new screen, replacing it the main flex ribbon that connects to volume port broke which is unrepairable and the pcb where the flex connects to the socket lid broke half way when removing the tape so dang fragile.
But the ribbon still goes in and it still closes, so the main issue is the flex ribbon with the broken volume button.
So my tech is an idiot. But i really want to use the HD2. Is there somebody that has those parts and can fix it?
I already spent $65 on the digi and screen so i feel
Yes go onto ebay and look for hd2 side volume key pcb.
It's a lengthy repair but nothing too difficult if you like electronics.
http://www.ebay.com/itm/New-OEM-HTC...ultDomain_0&hash=item1c21fcc331#ht_1766wt_964
found it, should have some fun now