Database Users

jumping to kernel

have a tmo us hd2
had a past version of android with sense it worked fine. tried a different and got the pause at jumping to kernel so tried a clean version, it worked. ive booted it plenty of times, then tonight it stopped working
so im trying froyostone with sense and now it wont boot either
im on omega v7 newest and radio 2.1.5.28_2

I was on the same problem, i think you have the android files directly on your SD Card? So that is the problem, put them in a new folder android.
That helps me, the first boot was by me also possible, but after that all reboots end in "jumping to kernel"

nope. theyre in the android folder.
and i just tried switching to the 2.12 radio
the strangest part is that is was working the past few days and earlier today...
id understand a certain build not working but why would it randomly stop working.

Have you made, since this problem more reboots. I have on my HD2 sometimes that i must boot 2-3 times to come up

yup, tried multiple reboots and both radios

have you solved a problem? I've similar problem. Each time I turn on the phone - I'm getting this error. Sometimes it helps to remove "cache' folder and some others and restart twice or may be 3 times. But no working 100% solution.

My Results
ppp vr.
Market ok
WIFI ok
BT ok
whitout freezes
little bit more sensitive touch screen
Very good job, DEV team you are masters

When I'm getting stuck at jump to kernel, I normally remove and reinsert the sd card when I booted into WM and most of the time that fixes it.

I (and other members) have found that "Jumping to kernel..." freeze occurs when one is using Windows for a period of time. The solution is usually to re-boot and once Windows loads *immediately* boot into Android. This has not failed me yet! Before I was like you, wondering why sometimes I get the freeze and other times I don't...but a fresh boot into Android solved my issue.
Hope this helps.

have you changed the kernal lately or switched any file , or renamed anything

have you tried changing the startup.txt file? look around for that solution..it has been posted here many times.
I would give you a link but I am posting from my cell so it would be a little difficult.
Sent from my HTC HD2 using XDA app on darkstone froyo sense v2

Fryo X red freez problem

i have installed FROYO x RED build it seem to work fine but after 5 min it freez i must remove battery to rebot.
any ideas to fix it?/

yeah i got the same problem

how to switch the boot to android only
everytime it freezes and after booting it winmo is booted and everytime i have to open haret

Same problem here, freezes every time. What is a decent OS that is stable, and doesn't eat the battery? And has a camera that actually works?

Kernel
Hey Guys,
Its most likely a Kernel problem so you need to update the kernel
to do this you simply have to overwrite the files "modulesxxxxxx.tar.gz" and “zImagexxxxxx” with the new ones
you can try these Kernels.
http://forum.xda-developers.com/showthread.php?t=788815
http://glemsom.users.anapnea.net/android2/htc-msm-linux/
Or
Search the forums for kernels
If i have helped give thanks
TjRoidz

Regarding flashing Glitch.v14-pre5 bootloop fix

Hi all
since i cannot post in Developer's apropriate forum i share with you here..
I have tried all ICS rom there is (not that many yet..) with Glitch v14 pr5 kernel, and they ALL give me bootloops... if not right away then after some period of time, and there is NO way to enter CWM
So i reflashed many many times in odin with different stock and other roms, but always with same result bootloops or a glitch screen logo that dont go any further.
Only if i go in recovery and format ALL options avalible and do a wipe data/factory reset afterwards + run the reset nstools zip avalible (off course only if you have been installing the glitch kernel )
Only then i get a error free install + i can boot in CWM and reboot whitout getting these errors......
Then im able to install > [ROM]SGS ICS 4.0.3 Doctor's ROM [01-12-2012]
and running on day 2 whit out any errors now..
Using nstools to oc and undervolt, is working fine selecting one of the 2 new goveneurs interactiveX or smartassv2 and DIDDLE deep sleep working perfect, BUT nstools wont tel you i always shows 0 in idle time (its nstolls fault) but voltage control EXTREME shows the right numbers
EDIT: Forgot to say that i pulled the externel sd card before going into CWM ! and do NOT deactivate nctools in app maneger !
Hope its ok posting this here ? plz delete or move else admins
Greets to all

[Q] Data Connection Issues caused by amarullz data2sdext?

Hi,
for some time now, I am experiencing problems with my data connection. When I am leaving home, my phone doesnt reconnect to mobile data connection from time to time. This also happens when being in the train or so: If there is no connection available and there comes a new, my phone doesnt reconnect. Switching data off and on sometimes solves the problem but most of the time, i have to reboot. Going to airplain mode often freezes my connection totally (like airplain mode OFF is greyed out/inactive).
As this problem only happens with some installations of roms and sometimes doesnt, i did a little survey and recognized, that its only and allways happening, when i am using Amarullz Data2sdext mod. I like this mod better then data2sd mods normally implanted in Hyperdroid so i am asking, if i do something wrong:
I Have a EU Leo, CLK 1.5 cwm touch. In the last time, i used differend Hyperdroid roms like 5.8 and 5.10 (left 5.9 out) and the ICS rom by tytung (V1.5). With Hyperdroid, i did the following:
1) wipe data/factory reset
2) wipe boot/system/dalvik/sdext everything alse despite sd
3) install the rom
4) boot once without signing in to google
5) reboot to cwm, installing the recovery version of amarullzdata2sdext
6) fixing perm
7) boot
8) reboot to cwm
9) fixing perm
10) boot + signing to google etc...
11) daily use
when i flash amarullz data2sdext, the installer says, that it removes data2sd before... may there be problems resulting due to data allready moved to sd before so i can bypass them by editing the zip, removing the old skript and integrating amarullz skript? Are there other possibilities?
Also one other question: in CLK 1.5, we can choose using last 24MB of ROM... may this result in rom freezes? I think I was experiencing so.
Thanks a lot,
Cmoe

Slow boot

I run a custom rom (DU) and the boot process takes at least 2 minutes, it feels really slow. A clean/empty flash of a rom doesn't even need a minute to boot.
I have 89 user apps from which are 16 xposed modules.
I use this setup:
DU rom
Bensschold's kernel
Opengapps pico
xposed systemless v86.2
Is there any reason that it boots this slow? Even my S4 booted faster with the same amount of apps and xposed. Besides this, the phone operates smoothly and lagfree

2mins for that much apps doesn't seem long.